Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
[linux/fpc-iii.git] / arch / arm / mach-omap1 / board-voiceblue.c
blob4677a9ccb3cbbb222bc50c2a59e3b66b81d73e18
1 /*
2 * linux/arch/arm/mach-omap1/board-voiceblue.c
4 * Modified from board-generic.c
6 * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
8 * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/delay.h>
16 #include <linux/gpio.h>
17 #include <linux/platform_device.h>
18 #include <linux/interrupt.h>
19 #include <linux/irq.h>
20 #include <linux/init.h>
21 #include <linux/kernel.h>
22 #include <linux/mtd/physmap.h>
23 #include <linux/notifier.h>
24 #include <linux/reboot.h>
25 #include <linux/serial_8250.h>
26 #include <linux/serial_reg.h>
27 #include <linux/smc91x.h>
28 #include <linux/export.h>
29 #include <linux/reboot.h>
31 #include <asm/mach-types.h>
32 #include <asm/mach/arch.h>
33 #include <asm/mach/map.h>
35 #include <mach/board-voiceblue.h>
36 #include <mach/flash.h>
37 #include <mach/mux.h>
38 #include <mach/tc.h>
40 #include <mach/hardware.h>
41 #include <mach/usb.h>
43 #include "common.h"
45 static struct plat_serial8250_port voiceblue_ports[] = {
47 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
48 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
49 .iotype = UPIO_MEM,
50 .regshift = 1,
51 .uartclk = 3686400,
54 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
55 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
56 .iotype = UPIO_MEM,
57 .regshift = 1,
58 .uartclk = 3686400,
61 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
62 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
63 .iotype = UPIO_MEM,
64 .regshift = 1,
65 .uartclk = 3686400,
68 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
69 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
70 .iotype = UPIO_MEM,
71 .regshift = 1,
72 .uartclk = 3686400,
74 { },
77 static struct platform_device serial_device = {
78 .name = "serial8250",
79 .id = PLAT8250_DEV_PLATFORM1,
82 static int __init ext_uart_init(void)
84 if (!machine_is_voiceblue())
85 return -ENODEV;
87 voiceblue_ports[0].irq = gpio_to_irq(12);
88 voiceblue_ports[1].irq = gpio_to_irq(13);
89 voiceblue_ports[2].irq = gpio_to_irq(14);
90 voiceblue_ports[3].irq = gpio_to_irq(15);
91 serial_device.dev.platform_data = voiceblue_ports;
92 return platform_device_register(&serial_device);
94 arch_initcall(ext_uart_init);
96 static struct physmap_flash_data voiceblue_flash_data = {
97 .width = 2,
98 .set_vpp = omap1_set_vpp,
101 static struct resource voiceblue_flash_resource = {
102 .start = OMAP_CS0_PHYS,
103 .end = OMAP_CS0_PHYS + SZ_32M - 1,
104 .flags = IORESOURCE_MEM,
107 static struct platform_device voiceblue_flash_device = {
108 .name = "physmap-flash",
109 .id = 0,
110 .dev = {
111 .platform_data = &voiceblue_flash_data,
113 .num_resources = 1,
114 .resource = &voiceblue_flash_resource,
117 static struct smc91x_platdata voiceblue_smc91x_info = {
118 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
119 .leda = RPC_LED_100_10,
120 .ledb = RPC_LED_TX_RX,
123 static struct resource voiceblue_smc91x_resources[] = {
124 [0] = {
125 .start = OMAP_CS2_PHYS + 0x300,
126 .end = OMAP_CS2_PHYS + 0x300 + 16,
127 .flags = IORESOURCE_MEM,
129 [1] = {
130 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
134 static struct platform_device voiceblue_smc91x_device = {
135 .name = "smc91x",
136 .id = 0,
137 .dev = {
138 .platform_data = &voiceblue_smc91x_info,
140 .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources),
141 .resource = voiceblue_smc91x_resources,
144 static struct platform_device *voiceblue_devices[] __initdata = {
145 &voiceblue_flash_device,
146 &voiceblue_smc91x_device,
149 static struct omap_usb_config voiceblue_usb_config __initdata = {
150 .hmc_mode = 3,
151 .register_host = 1,
152 .register_dev = 1,
153 .pins[0] = 2,
154 .pins[1] = 6,
155 .pins[2] = 6,
158 #define MACHINE_PANICED 1
159 #define MACHINE_REBOOTING 2
160 #define MACHINE_REBOOT 4
161 static unsigned long machine_state;
163 static int panic_event(struct notifier_block *this, unsigned long event,
164 void *ptr)
166 if (test_and_set_bit(MACHINE_PANICED, &machine_state))
167 return NOTIFY_DONE;
169 /* Flash power LED */
170 omap_writeb(0x78, OMAP_LPG1_LCR);
171 omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */
173 return NOTIFY_DONE;
176 static struct notifier_block panic_block = {
177 .notifier_call = panic_event,
180 static int __init voiceblue_setup(void)
182 if (!machine_is_voiceblue())
183 return -ENODEV;
185 /* Setup panic notifier */
186 atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
188 return 0;
190 postcore_initcall(voiceblue_setup);
192 static int wdt_gpio_state;
194 void voiceblue_wdt_enable(void)
196 gpio_direction_output(0, 0);
197 gpio_set_value(0, 1);
198 gpio_set_value(0, 0);
199 wdt_gpio_state = 0;
202 void voiceblue_wdt_disable(void)
204 gpio_set_value(0, 0);
205 gpio_set_value(0, 1);
206 gpio_set_value(0, 0);
207 gpio_direction_input(0);
210 void voiceblue_wdt_ping(void)
212 if (test_bit(MACHINE_REBOOT, &machine_state))
213 return;
215 wdt_gpio_state = !wdt_gpio_state;
216 gpio_set_value(0, wdt_gpio_state);
219 static void voiceblue_restart(enum reboot_mode mode, const char *cmd)
222 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
223 * "Global Software Reset Affects Traffic Controller Frequency".
225 if (cpu_is_omap5912()) {
226 omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
227 omap_writew(0x8, ARM_RSTCT1);
230 set_bit(MACHINE_REBOOT, &machine_state);
231 voiceblue_wdt_enable();
232 while (1) ;
235 EXPORT_SYMBOL(voiceblue_wdt_enable);
236 EXPORT_SYMBOL(voiceblue_wdt_disable);
237 EXPORT_SYMBOL(voiceblue_wdt_ping);
239 static void __init voiceblue_init(void)
241 /* mux pins for uarts */
242 omap_cfg_reg(UART1_TX);
243 omap_cfg_reg(UART1_RTS);
244 omap_cfg_reg(UART2_TX);
245 omap_cfg_reg(UART2_RTS);
246 omap_cfg_reg(UART3_TX);
247 omap_cfg_reg(UART3_RX);
249 /* Watchdog */
250 gpio_request(0, "Watchdog");
251 /* smc91x reset */
252 gpio_request(7, "SMC91x reset");
253 gpio_direction_output(7, 1);
254 udelay(2); /* wait at least 100ns */
255 gpio_set_value(7, 0);
256 mdelay(50); /* 50ms until PHY ready */
257 /* smc91x interrupt pin */
258 gpio_request(8, "SMC91x irq");
259 /* 16C554 reset*/
260 gpio_request(6, "16C554 reset");
261 gpio_direction_output(6, 0);
262 /* 16C554 interrupt pins */
263 gpio_request(12, "16C554 irq");
264 gpio_request(13, "16C554 irq");
265 gpio_request(14, "16C554 irq");
266 gpio_request(15, "16C554 irq");
267 irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
268 irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
269 irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
270 irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
272 voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
273 voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
274 platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
275 omap_serial_init();
276 omap1_usb_init(&voiceblue_usb_config);
277 omap_register_i2c_bus(1, 100, NULL, 0);
279 /* There is a good chance board is going up, so enable power LED
280 * (it is connected through invertor) */
281 omap_writeb(0x00, OMAP_LPG1_LCR);
282 omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
285 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
286 /* Maintainer: Ladislav Michl <michl@2n.cz> */
287 .atag_offset = 0x100,
288 .map_io = omap15xx_map_io,
289 .init_early = omap1_init_early,
290 .init_irq = omap1_init_irq,
291 .init_machine = voiceblue_init,
292 .init_late = omap1_init_late,
293 .init_time = omap1_timer_init,
294 .restart = voiceblue_restart,
295 MACHINE_END