| blob | b16d4a57fa59dd529e2ae97bd8890521bf543fe6 |
1 /*
2 * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
11 * more details.
12 *
13 * You should have received a copy of the GNU General Public License
14 * along with this program. If not, see <http://www.gnu.org/licenses/>.
15 */
17 #include <linux/linkage.h>
19 #include <asm/assembler.h>
20 #include <asm/asm-offsets.h>
21 #include <asm/cache.h>
23 #include "irammap.h"
24 #include "fuse.h"
25 #include "sleep.h"
26 #include "flowctrl.h"
28 #define EMC_CFG 0xc
29 #define EMC_ADR_CFG 0x10
30 #define EMC_TIMING_CONTROL 0x28
31 #define EMC_REFRESH 0x70
32 #define EMC_NOP 0xdc
33 #define EMC_SELF_REF 0xe0
34 #define EMC_MRW 0xe8
35 #define EMC_FBIO_CFG5 0x104
36 #define EMC_AUTO_CAL_CONFIG 0x2a4
37 #define EMC_AUTO_CAL_INTERVAL 0x2a8
38 #define EMC_AUTO_CAL_STATUS 0x2ac
39 #define EMC_REQ_CTRL 0x2b0
40 #define EMC_CFG_DIG_DLL 0x2bc
41 #define EMC_EMC_STATUS 0x2b4
42 #define EMC_ZCAL_INTERVAL 0x2e0
43 #define EMC_ZQ_CAL 0x2ec
44 #define EMC_XM2VTTGENPADCTRL 0x310
45 #define EMC_XM2VTTGENPADCTRL2 0x314
47 #define PMC_CTRL 0x0
48 #define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */
50 #define PMC_PLLP_WB0_OVERRIDE 0xf8
51 #define PMC_IO_DPD_REQ 0x1b8
52 #define PMC_IO_DPD_STATUS 0x1bc
54 #define CLK_RESET_CCLK_BURST 0x20
55 #define CLK_RESET_CCLK_DIVIDER 0x24
56 #define CLK_RESET_SCLK_BURST 0x28
57 #define CLK_RESET_SCLK_DIVIDER 0x2c
59 #define CLK_RESET_PLLC_BASE 0x80
60 #define CLK_RESET_PLLC_MISC 0x8c
61 #define CLK_RESET_PLLM_BASE 0x90
62 #define CLK_RESET_PLLM_MISC 0x9c
63 #define CLK_RESET_PLLP_BASE 0xa0
64 #define CLK_RESET_PLLP_MISC 0xac
65 #define CLK_RESET_PLLA_BASE 0xb0
66 #define CLK_RESET_PLLA_MISC 0xbc
67 #define CLK_RESET_PLLX_BASE 0xe0
68 #define CLK_RESET_PLLX_MISC 0xe4
69 #define CLK_RESET_PLLX_MISC3 0x518
70 #define CLK_RESET_PLLX_MISC3_IDDQ 3
71 #define CLK_RESET_PLLM_MISC_IDDQ 5
72 #define CLK_RESET_PLLC_MISC_IDDQ 26
74 #define CLK_RESET_CLK_SOURCE_MSELECT 0x3b4
76 #define MSELECT_CLKM (0x3 << 30)
78 #define LOCK_DELAY 50 /* safety delay after lock is detected */
80 #define TEGRA30_POWER_HOTPLUG_SHUTDOWN (1 << 27) /* Hotplug shutdown */
82 .macro emc_device_mask, rd, base
83 ldr \rd, [\base, #EMC_ADR_CFG]
84 tst \rd, #0x1
85 moveq \rd, #(0x1 << 8) @ just 1 device
86 movne \rd, #(0x3 << 8) @ 2 devices
87 .endm
89 .macro emc_timing_update, rd, base
90 mov \rd, #1
91 str \rd, [\base, #EMC_TIMING_CONTROL]
92 1001:
93 ldr \rd, [\base, #EMC_EMC_STATUS]
94 tst \rd, #(0x1<<23) @ wait EMC_STATUS_TIMING_UPDATE_STALLED is clear
95 bne 1001b
96 .endm
98 .macro pll_enable, rd, r_car_base, pll_base, pll_misc
99 ldr \rd, [\r_car_base, #\pll_base]
100 tst \rd, #(1 << 30)
101 orreq \rd, \rd, #(1 << 30)
102 streq \rd, [\r_car_base, #\pll_base]
103 /* Enable lock detector */
104 .if \pll_misc
105 ldr \rd, [\r_car_base, #\pll_misc]
106 bic \rd, \rd, #(1 << 18)
107 str \rd, [\r_car_base, #\pll_misc]
108 ldr \rd, [\r_car_base, #\pll_misc]
109 ldr \rd, [\r_car_base, #\pll_misc]
110 orr \rd, \rd, #(1 << 18)
111 str \rd, [\r_car_base, #\pll_misc]
112 .endif
113 .endm
115 .macro pll_locked, rd, r_car_base, pll_base
116 1:
117 ldr \rd, [\r_car_base, #\pll_base]
118 tst \rd, #(1 << 27)
119 beq 1b
120 .endm
122 .macro pll_iddq_exit, rd, car, iddq, iddq_bit
123 ldr \rd, [\car, #\iddq]
124 bic \rd, \rd, #(1<<\iddq_bit)
125 str \rd, [\car, #\iddq]
126 .endm
128 .macro pll_iddq_entry, rd, car, iddq, iddq_bit
129 ldr \rd, [\car, #\iddq]
130 orr \rd, \rd, #(1<<\iddq_bit)
131 str \rd, [\car, #\iddq]
132 .endm
134 #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
135 /*
136 * tegra30_hotplug_shutdown(void)
137 *
138 * Powergates the current CPU.
139 * Should never return.
140 */
141 ENTRY(tegra30_hotplug_shutdown)
142 /* Powergate this CPU */
143 mov r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
144 bl tegra30_cpu_shutdown
145 mov pc, lr @ should never get here
146 ENDPROC(tegra30_hotplug_shutdown)
148 /*
149 * tegra30_cpu_shutdown(unsigned long flags)
150 *
151 * Puts the current CPU in wait-for-event mode on the flow controller
152 * and powergates it -- flags (in R0) indicate the request type.
153 *
154 * r10 = SoC ID
155 * corrupts r0-r4, r10-r12
156 */
157 ENTRY(tegra30_cpu_shutdown)
158 cpu_id r3
159 tegra_get_soc_id TEGRA_APB_MISC_VIRT, r10
160 cmp r10, #TEGRA30
161 bne _no_cpu0_chk @ It's not Tegra30
163 cmp r3, #0
164 moveq pc, lr @ Must never be called for CPU 0
165 _no_cpu0_chk:
167 ldr r12, =TEGRA_FLOW_CTRL_VIRT
168 cpu_to_csr_reg r1, r3
169 add r1, r1, r12 @ virtual CSR address for this CPU
170 cpu_to_halt_reg r2, r3
171 add r2, r2, r12 @ virtual HALT_EVENTS address for this CPU
173 /*
174 * Clear this CPU's "event" and "interrupt" flags and power gate
175 * it when halting but not before it is in the "WFE" state.
176 */
177 movw r12, \
178 FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG | \
179 FLOW_CTRL_CSR_ENABLE
180 cmp r10, #TEGRA30
181 moveq r4, #(1 << 4) @ wfe bitmap
182 movne r4, #(1 << 8) @ wfi bitmap
183 ARM( orr r12, r12, r4, lsl r3 )
184 THUMB( lsl r4, r4, r3 )
185 THUMB( orr r12, r12, r4 )
186 str r12, [r1]
188 /* Halt this CPU. */
189 mov r3, #0x400
190 delay_1:
191 subs r3, r3, #1 @ delay as a part of wfe war.
192 bge delay_1;
193 cpsid a @ disable imprecise aborts.
194 ldr r3, [r1] @ read CSR
195 str r3, [r1] @ clear CSR
197 tst r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
198 beq flow_ctrl_setting_for_lp2
200 /* flow controller set up for hotplug */
201 mov r3, #FLOW_CTRL_WAITEVENT @ For hotplug
202 b flow_ctrl_done
203 flow_ctrl_setting_for_lp2:
204 /* flow controller set up for LP2 */
205 cmp r10, #TEGRA30
206 moveq r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT @ For LP2
207 movne r3, #FLOW_CTRL_WAITEVENT
208 orrne r3, r3, #FLOW_CTRL_HALT_GIC_IRQ
209 orrne r3, r3, #FLOW_CTRL_HALT_GIC_FIQ
210 flow_ctrl_done:
211 cmp r10, #TEGRA30
212 str r3, [r2]
213 ldr r0, [r2]
214 b wfe_war
216 __cpu_reset_again:
217 dsb
218 .align 5
219 wfeeq @ CPU should be power gated here
220 wfine
221 wfe_war:
222 b __cpu_reset_again
224 /*
225 * 38 nop's, which fills reset of wfe cache line and
226 * 4 more cachelines with nop
227 */
228 .rept 38
229 nop
230 .endr
231 b . @ should never get here
233 ENDPROC(tegra30_cpu_shutdown)
234 #endif
236 #ifdef CONFIG_PM_SLEEP
237 /*
238 * tegra30_sleep_core_finish(unsigned long v2p)
239 *
240 * Enters suspend in LP0 or LP1 by turning off the MMU and jumping to
241 * tegra30_tear_down_core in IRAM
242 */
243 ENTRY(tegra30_sleep_core_finish)
244 /* Flush, disable the L1 data cache and exit SMP */
245 bl tegra_disable_clean_inv_dcache
247 /*
248 * Preload all the address literals that are needed for the
249 * CPU power-gating process, to avoid loading from SDRAM which
250 * are not supported once SDRAM is put into self-refresh.
251 * LP0 / LP1 use physical address, since the MMU needs to be
252 * disabled before putting SDRAM into self-refresh to avoid
253 * memory access due to page table walks.
254 */
255 mov32 r4, TEGRA_PMC_BASE
256 mov32 r5, TEGRA_CLK_RESET_BASE
257 mov32 r6, TEGRA_FLOW_CTRL_BASE
258 mov32 r7, TEGRA_TMRUS_BASE
260 mov32 r3, tegra_shut_off_mmu
261 add r3, r3, r0
263 mov32 r0, tegra30_tear_down_core
264 mov32 r1, tegra30_iram_start
265 sub r0, r0, r1
266 mov32 r1, TEGRA_IRAM_LPx_RESUME_AREA
267 add r0, r0, r1
269 mov pc, r3
270 ENDPROC(tegra30_sleep_core_finish)
272 /*
273 * tegra30_sleep_cpu_secondary_finish(unsigned long v2p)
274 *
275 * Enters LP2 on secondary CPU by exiting coherency and powergating the CPU.
276 */
277 ENTRY(tegra30_sleep_cpu_secondary_finish)
278 mov r7, lr
280 /* Flush and disable the L1 data cache */
281 mov r0, #TEGRA_FLUSH_CACHE_LOUIS
282 bl tegra_disable_clean_inv_dcache
284 /* Powergate this CPU. */
285 mov r0, #0 @ power mode flags (!hotplug)
286 bl tegra30_cpu_shutdown
287 mov r0, #1 @ never return here
288 mov pc, r7
289 ENDPROC(tegra30_sleep_cpu_secondary_finish)
291 /*
292 * tegra30_tear_down_cpu
293 *
294 * Switches the CPU to enter sleep.
295 */
296 ENTRY(tegra30_tear_down_cpu)
297 mov32 r6, TEGRA_FLOW_CTRL_BASE
299 b tegra30_enter_sleep
300 ENDPROC(tegra30_tear_down_cpu)
302 /* START OF ROUTINES COPIED TO IRAM */
303 .align L1_CACHE_SHIFT
304 .globl tegra30_iram_start
305 tegra30_iram_start:
307 /*
308 * tegra30_lp1_reset
309 *
310 * reset vector for LP1 restore; copied into IRAM during suspend.
311 * Brings the system back up to a safe staring point (SDRAM out of
312 * self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLX,
313 * system clock running on the same PLL that it suspended at), and
314 * jumps to tegra_resume to restore virtual addressing.
315 * The physical address of tegra_resume expected to be stored in
316 * PMC_SCRATCH41.
317 *
318 * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
319 */
320 ENTRY(tegra30_lp1_reset)
321 /*
322 * The CPU and system bus are running at 32KHz and executing from
323 * IRAM when this code is executed; immediately switch to CLKM and
324 * enable PLLP, PLLM, PLLC, PLLA and PLLX.
325 */
326 mov32 r0, TEGRA_CLK_RESET_BASE
328 mov r1, #(1 << 28)
329 str r1, [r0, #CLK_RESET_SCLK_BURST]
330 str r1, [r0, #CLK_RESET_CCLK_BURST]
331 mov r1, #0
332 str r1, [r0, #CLK_RESET_CCLK_DIVIDER]
333 str r1, [r0, #CLK_RESET_SCLK_DIVIDER]
335 tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
336 cmp r10, #TEGRA30
337 beq _no_pll_iddq_exit
339 pll_iddq_exit r1, r0, CLK_RESET_PLLM_MISC, CLK_RESET_PLLM_MISC_IDDQ
340 pll_iddq_exit r1, r0, CLK_RESET_PLLC_MISC, CLK_RESET_PLLC_MISC_IDDQ
341 pll_iddq_exit r1, r0, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
343 mov32 r7, TEGRA_TMRUS_BASE
344 ldr r1, [r7]
345 add r1, r1, #2
346 wait_until r1, r7, r3
348 /* enable PLLM via PMC */
349 mov32 r2, TEGRA_PMC_BASE
350 ldr r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
351 orr r1, r1, #(1 << 12)
352 str r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
354 pll_enable r1, r0, CLK_RESET_PLLM_BASE, 0
355 pll_enable r1, r0, CLK_RESET_PLLC_BASE, 0
356 pll_enable r1, r0, CLK_RESET_PLLX_BASE, 0
358 b _pll_m_c_x_done
360 _no_pll_iddq_exit:
361 /* enable PLLM via PMC */
362 mov32 r2, TEGRA_PMC_BASE
363 ldr r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
364 orr r1, r1, #(1 << 12)
365 str r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
367 pll_enable r1, r0, CLK_RESET_PLLM_BASE, CLK_RESET_PLLM_MISC
368 pll_enable r1, r0, CLK_RESET_PLLC_BASE, CLK_RESET_PLLC_MISC
369 pll_enable r1, r0, CLK_RESET_PLLX_BASE, CLK_RESET_PLLX_MISC
371 _pll_m_c_x_done:
372 pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC
373 pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC
375 pll_locked r1, r0, CLK_RESET_PLLM_BASE
376 pll_locked r1, r0, CLK_RESET_PLLP_BASE
377 pll_locked r1, r0, CLK_RESET_PLLA_BASE
378 pll_locked r1, r0, CLK_RESET_PLLC_BASE
379 pll_locked r1, r0, CLK_RESET_PLLX_BASE
381 mov32 r7, TEGRA_TMRUS_BASE
382 ldr r1, [r7]
383 add r1, r1, #LOCK_DELAY
384 wait_until r1, r7, r3
386 adr r5, tegra_sdram_pad_save
388 ldr r4, [r5, #0x18] @ restore CLK_SOURCE_MSELECT
389 str r4, [r0, #CLK_RESET_CLK_SOURCE_MSELECT]
391 ldr r4, [r5, #0x1C] @ restore SCLK_BURST
392 str r4, [r0, #CLK_RESET_SCLK_BURST]
394 cmp r10, #TEGRA30
395 movweq r4, #:lower16:((1 << 28) | (0x8)) @ burst policy is PLLX
396 movteq r4, #:upper16:((1 << 28) | (0x8))
397 movwne r4, #:lower16:((1 << 28) | (0xe))
398 movtne r4, #:upper16:((1 << 28) | (0xe))
399 str r4, [r0, #CLK_RESET_CCLK_BURST]
401 /* Restore pad power state to normal */
402 ldr r1, [r5, #0x14] @ PMC_IO_DPD_STATUS
403 mvn r1, r1
404 bic r1, r1, #(1 << 31)
405 orr r1, r1, #(1 << 30)
406 str r1, [r2, #PMC_IO_DPD_REQ] @ DPD_OFF
408 cmp r10, #TEGRA30
409 movweq r0, #:lower16:TEGRA_EMC_BASE @ r0 reserved for emc base
410 movteq r0, #:upper16:TEGRA_EMC_BASE
411 cmp r10, #TEGRA114
412 movweq r0, #:lower16:TEGRA_EMC0_BASE
413 movteq r0, #:upper16:TEGRA_EMC0_BASE
414 cmp r10, #TEGRA124
415 movweq r0, #:lower16:TEGRA124_EMC_BASE
416 movteq r0, #:upper16:TEGRA124_EMC_BASE
418 exit_self_refresh:
419 ldr r1, [r5, #0xC] @ restore EMC_XM2VTTGENPADCTRL
420 str r1, [r0, #EMC_XM2VTTGENPADCTRL]
421 ldr r1, [r5, #0x10] @ restore EMC_XM2VTTGENPADCTRL2
422 str r1, [r0, #EMC_XM2VTTGENPADCTRL2]
423 ldr r1, [r5, #0x8] @ restore EMC_AUTO_CAL_INTERVAL
424 str r1, [r0, #EMC_AUTO_CAL_INTERVAL]
426 /* Relock DLL */
427 ldr r1, [r0, #EMC_CFG_DIG_DLL]
428 orr r1, r1, #(1 << 30) @ set DLL_RESET
429 str r1, [r0, #EMC_CFG_DIG_DLL]
431 emc_timing_update r1, r0
433 cmp r10, #TEGRA114
434 movweq r1, #:lower16:TEGRA_EMC1_BASE
435 movteq r1, #:upper16:TEGRA_EMC1_BASE
436 cmpeq r0, r1
438 ldr r1, [r0, #EMC_AUTO_CAL_CONFIG]
439 orr r1, r1, #(1 << 31) @ set AUTO_CAL_ACTIVE
440 orreq r1, r1, #(1 << 27) @ set slave mode for channel 1
441 str r1, [r0, #EMC_AUTO_CAL_CONFIG]
443 emc_wait_auto_cal_onetime:
444 ldr r1, [r0, #EMC_AUTO_CAL_STATUS]
445 tst r1, #(1 << 31) @ wait until AUTO_CAL_ACTIVE is cleared
446 bne emc_wait_auto_cal_onetime
448 ldr r1, [r0, #EMC_CFG]
449 bic r1, r1, #(1 << 31) @ disable DRAM_CLK_STOP_PD
450 str r1, [r0, #EMC_CFG]
452 mov r1, #0
453 str r1, [r0, #EMC_SELF_REF] @ take DRAM out of self refresh
454 mov r1, #1
455 cmp r10, #TEGRA30
456 streq r1, [r0, #EMC_NOP]
457 streq r1, [r0, #EMC_NOP]
458 streq r1, [r0, #EMC_REFRESH]
460 emc_device_mask r1, r0
462 exit_selfrefresh_loop:
463 ldr r2, [r0, #EMC_EMC_STATUS]
464 ands r2, r2, r1
465 bne exit_selfrefresh_loop
467 lsr r1, r1, #8 @ devSel, bit0:dev0, bit1:dev1
469 mov32 r7, TEGRA_TMRUS_BASE
470 ldr r2, [r0, #EMC_FBIO_CFG5]
472 and r2, r2, #3 @ check DRAM_TYPE
473 cmp r2, #2
474 beq emc_lpddr2
476 /* Issue a ZQ_CAL for dev0 - DDR3 */
477 mov32 r2, 0x80000011 @ DEV_SELECTION=2, LENGTH=LONG, CMD=1
478 str r2, [r0, #EMC_ZQ_CAL]
479 ldr r2, [r7]
480 add r2, r2, #10
481 wait_until r2, r7, r3
483 tst r1, #2
484 beq zcal_done
486 /* Issue a ZQ_CAL for dev1 - DDR3 */
487 mov32 r2, 0x40000011 @ DEV_SELECTION=1, LENGTH=LONG, CMD=1
488 str r2, [r0, #EMC_ZQ_CAL]
489 ldr r2, [r7]
490 add r2, r2, #10
491 wait_until r2, r7, r3
492 b zcal_done
494 emc_lpddr2:
495 /* Issue a ZQ_CAL for dev0 - LPDDR2 */
496 mov32 r2, 0x800A00AB @ DEV_SELECTION=2, MA=10, OP=0xAB
497 str r2, [r0, #EMC_MRW]
498 ldr r2, [r7]
499 add r2, r2, #1
500 wait_until r2, r7, r3
502 tst r1, #2
503 beq zcal_done
505 /* Issue a ZQ_CAL for dev0 - LPDDR2 */
506 mov32 r2, 0x400A00AB @ DEV_SELECTION=1, MA=10, OP=0xAB
507 str r2, [r0, #EMC_MRW]
508 ldr r2, [r7]
509 add r2, r2, #1
510 wait_until r2, r7, r3
512 zcal_done:
513 mov r1, #0 @ unstall all transactions
514 str r1, [r0, #EMC_REQ_CTRL]
515 ldr r1, [r5, #0x4] @ restore EMC_ZCAL_INTERVAL
516 str r1, [r0, #EMC_ZCAL_INTERVAL]
517 ldr r1, [r5, #0x0] @ restore EMC_CFG
518 str r1, [r0, #EMC_CFG]
520 /* Tegra114 had dual EMC channel, now config the other one */
521 cmp r10, #TEGRA114
522 bne __no_dual_emc_chanl
523 mov32 r1, TEGRA_EMC1_BASE
524 cmp r0, r1
525 movne r0, r1
526 addne r5, r5, #0x20
527 bne exit_self_refresh
528 __no_dual_emc_chanl:
530 mov32 r0, TEGRA_PMC_BASE
531 ldr r0, [r0, #PMC_SCRATCH41]
532 mov pc, r0 @ jump to tegra_resume
533 ENDPROC(tegra30_lp1_reset)
535 .align L1_CACHE_SHIFT
536 tegra30_sdram_pad_address:
537 .word TEGRA_EMC_BASE + EMC_CFG @0x0
538 .word TEGRA_EMC_BASE + EMC_ZCAL_INTERVAL @0x4
539 .word TEGRA_EMC_BASE + EMC_AUTO_CAL_INTERVAL @0x8
540 .word TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL @0xc
541 .word TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL2 @0x10
542 .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
543 .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
544 .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
545 tegra30_sdram_pad_address_end:
547 tegra114_sdram_pad_address:
548 .word TEGRA_EMC0_BASE + EMC_CFG @0x0
549 .word TEGRA_EMC0_BASE + EMC_ZCAL_INTERVAL @0x4
550 .word TEGRA_EMC0_BASE + EMC_AUTO_CAL_INTERVAL @0x8
551 .word TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL @0xc
552 .word TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL2 @0x10
553 .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
554 .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
555 .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
556 .word TEGRA_EMC1_BASE + EMC_CFG @0x20
557 .word TEGRA_EMC1_BASE + EMC_ZCAL_INTERVAL @0x24
558 .word TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL @0x28
559 .word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL @0x2c
560 .word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2 @0x30
561 tegra114_sdram_pad_adress_end:
563 tegra124_sdram_pad_address:
564 .word TEGRA124_EMC_BASE + EMC_CFG @0x0
565 .word TEGRA124_EMC_BASE + EMC_ZCAL_INTERVAL @0x4
566 .word TEGRA124_EMC_BASE + EMC_AUTO_CAL_INTERVAL @0x8
567 .word TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL @0xc
568 .word TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL2 @0x10
569 .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
570 .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
571 .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
572 tegra124_sdram_pad_address_end:
574 tegra30_sdram_pad_size:
575 .word tegra30_sdram_pad_address_end - tegra30_sdram_pad_address
577 tegra114_sdram_pad_size:
578 .word tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address
580 .type tegra_sdram_pad_save, %object
581 tegra_sdram_pad_save:
582 .rept (tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address) / 4
583 .long 0
584 .endr
586 /*
587 * tegra30_tear_down_core
588 *
589 * copied into and executed from IRAM
590 * puts memory in self-refresh for LP0 and LP1
591 */
592 tegra30_tear_down_core:
593 bl tegra30_sdram_self_refresh
594 bl tegra30_switch_cpu_to_clk32k
595 b tegra30_enter_sleep
597 /*
598 * tegra30_switch_cpu_to_clk32k
599 *
600 * In LP0 and LP1 all PLLs will be turned off. Switching the CPU and System CLK
601 * to the 32KHz clock.
602 * r4 = TEGRA_PMC_BASE
603 * r5 = TEGRA_CLK_RESET_BASE
604 * r6 = TEGRA_FLOW_CTRL_BASE
605 * r7 = TEGRA_TMRUS_BASE
606 * r10= SoC ID
607 */
608 tegra30_switch_cpu_to_clk32k:
609 /*
610 * start by jumping to CLKM to safely disable PLLs, then jump to
611 * CLKS.
612 */
613 mov r0, #(1 << 28)
614 str r0, [r5, #CLK_RESET_SCLK_BURST]
615 /* 2uS delay delay between changing SCLK and CCLK */
616 ldr r1, [r7]
617 add r1, r1, #2
618 wait_until r1, r7, r9
619 str r0, [r5, #CLK_RESET_CCLK_BURST]
620 mov r0, #0
621 str r0, [r5, #CLK_RESET_CCLK_DIVIDER]
622 str r0, [r5, #CLK_RESET_SCLK_DIVIDER]
624 /* switch the clock source of mselect to be CLK_M */
625 ldr r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
626 orr r0, r0, #MSELECT_CLKM
627 str r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
629 /* 2uS delay delay between changing SCLK and disabling PLLs */
630 ldr r1, [r7]
631 add r1, r1, #2
632 wait_until r1, r7, r9
634 /* disable PLLM via PMC in LP1 */
635 ldr r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
636 bic r0, r0, #(1 << 12)
637 str r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
639 /* disable PLLP, PLLA, PLLC and PLLX */
640 ldr r0, [r5, #CLK_RESET_PLLP_BASE]
641 bic r0, r0, #(1 << 30)
642 str r0, [r5, #CLK_RESET_PLLP_BASE]
643 ldr r0, [r5, #CLK_RESET_PLLA_BASE]
644 bic r0, r0, #(1 << 30)
645 str r0, [r5, #CLK_RESET_PLLA_BASE]
646 ldr r0, [r5, #CLK_RESET_PLLC_BASE]
647 bic r0, r0, #(1 << 30)
648 str r0, [r5, #CLK_RESET_PLLC_BASE]
649 ldr r0, [r5, #CLK_RESET_PLLX_BASE]
650 bic r0, r0, #(1 << 30)
651 str r0, [r5, #CLK_RESET_PLLX_BASE]
653 cmp r10, #TEGRA30
654 beq _no_pll_in_iddq
655 pll_iddq_entry r1, r5, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
656 _no_pll_in_iddq:
658 /* switch to CLKS */
659 mov r0, #0 /* brust policy = 32KHz */
660 str r0, [r5, #CLK_RESET_SCLK_BURST]
662 mov pc, lr
664 /*
665 * tegra30_enter_sleep
666 *
667 * uses flow controller to enter sleep state
668 * executes from IRAM with SDRAM in selfrefresh when target state is LP0 or LP1
669 * executes from SDRAM with target state is LP2
670 * r6 = TEGRA_FLOW_CTRL_BASE
671 */
672 tegra30_enter_sleep:
673 cpu_id r1
675 cpu_to_csr_reg r2, r1
676 ldr r0, [r6, r2]
677 orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
678 orr r0, r0, #FLOW_CTRL_CSR_ENABLE
679 str r0, [r6, r2]
681 tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
682 cmp r10, #TEGRA30
683 mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT
684 orreq r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
685 orrne r0, r0, #FLOW_CTRL_HALT_LIC_IRQ | FLOW_CTRL_HALT_LIC_FIQ
687 cpu_to_halt_reg r2, r1
688 str r0, [r6, r2]
689 dsb
690 ldr r0, [r6, r2] /* memory barrier */
692 halted:
693 isb
694 dsb
695 wfi /* CPU should be power gated here */
697 /* !!!FIXME!!! Implement halt failure handler */
698 b halted
700 /*
701 * tegra30_sdram_self_refresh
702 *
703 * called with MMU off and caches disabled
704 * must be executed from IRAM
705 * r4 = TEGRA_PMC_BASE
706 * r5 = TEGRA_CLK_RESET_BASE
707 * r6 = TEGRA_FLOW_CTRL_BASE
708 * r7 = TEGRA_TMRUS_BASE
709 * r10= SoC ID
710 */
711 tegra30_sdram_self_refresh:
713 adr r8, tegra_sdram_pad_save
714 tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
715 cmp r10, #TEGRA30
716 adreq r2, tegra30_sdram_pad_address
717 ldreq r3, tegra30_sdram_pad_size
718 cmp r10, #TEGRA114
719 adreq r2, tegra114_sdram_pad_address
720 ldreq r3, tegra114_sdram_pad_size
721 cmp r10, #TEGRA124
722 adreq r2, tegra124_sdram_pad_address
723 ldreq r3, tegra30_sdram_pad_size
725 mov r9, #0
727 padsave:
728 ldr r0, [r2, r9] @ r0 is the addr in the pad_address
730 ldr r1, [r0]
731 str r1, [r8, r9] @ save the content of the addr
733 add r9, r9, #4
734 cmp r3, r9
735 bne padsave
736 padsave_done:
738 dsb
740 cmp r10, #TEGRA30
741 ldreq r0, =TEGRA_EMC_BASE @ r0 reserved for emc base addr
742 cmp r10, #TEGRA114
743 ldreq r0, =TEGRA_EMC0_BASE
744 cmp r10, #TEGRA124
745 ldreq r0, =TEGRA124_EMC_BASE
747 enter_self_refresh:
748 cmp r10, #TEGRA30
749 mov r1, #0
750 str r1, [r0, #EMC_ZCAL_INTERVAL]
751 str r1, [r0, #EMC_AUTO_CAL_INTERVAL]
752 ldr r1, [r0, #EMC_CFG]
753 bic r1, r1, #(1 << 28)
754 bicne r1, r1, #(1 << 29)
755 str r1, [r0, #EMC_CFG] @ disable DYN_SELF_REF
757 emc_timing_update r1, r0
759 ldr r1, [r7]
760 add r1, r1, #5
761 wait_until r1, r7, r2
763 emc_wait_auto_cal:
764 ldr r1, [r0, #EMC_AUTO_CAL_STATUS]
765 tst r1, #(1 << 31) @ wait until AUTO_CAL_ACTIVE is cleared
766 bne emc_wait_auto_cal
768 mov r1, #3
769 str r1, [r0, #EMC_REQ_CTRL] @ stall incoming DRAM requests
771 emcidle:
772 ldr r1, [r0, #EMC_EMC_STATUS]
773 tst r1, #4
774 beq emcidle
776 mov r1, #1
777 str r1, [r0, #EMC_SELF_REF]
779 emc_device_mask r1, r0
781 emcself:
782 ldr r2, [r0, #EMC_EMC_STATUS]
783 and r2, r2, r1
784 cmp r2, r1
785 bne emcself @ loop until DDR in self-refresh
787 /* Put VTTGEN in the lowest power mode */
788 ldr r1, [r0, #EMC_XM2VTTGENPADCTRL]
789 mov32 r2, 0xF8F8FFFF @ clear XM2VTTGEN_DRVUP and XM2VTTGEN_DRVDN
790 and r1, r1, r2
791 str r1, [r0, #EMC_XM2VTTGENPADCTRL]
792 ldr r1, [r0, #EMC_XM2VTTGENPADCTRL2]
793 cmp r10, #TEGRA30
794 orreq r1, r1, #7 @ set E_NO_VTTGEN
795 orrne r1, r1, #0x3f
796 str r1, [r0, #EMC_XM2VTTGENPADCTRL2]
798 emc_timing_update r1, r0
800 /* Tegra114 had dual EMC channel, now config the other one */
801 cmp r10, #TEGRA114
802 bne no_dual_emc_chanl
803 mov32 r1, TEGRA_EMC1_BASE
804 cmp r0, r1
805 movne r0, r1
806 bne enter_self_refresh
807 no_dual_emc_chanl:
809 ldr r1, [r4, #PMC_CTRL]
810 tst r1, #PMC_CTRL_SIDE_EFFECT_LP0
811 bne pmc_io_dpd_skip
812 /*
813 * Put DDR_DATA, DISC_ADDR_CMD, DDR_ADDR_CMD, POP_ADDR_CMD, POP_CLK
814 * and COMP in the lowest power mode when LP1.
815 */
816 mov32 r1, 0x8EC00000
817 str r1, [r4, #PMC_IO_DPD_REQ]
818 pmc_io_dpd_skip:
820 dsb
822 mov pc, lr
824 .ltorg
825 /* dummy symbol for end of IRAM */
826 .align L1_CACHE_SHIFT
827 .global tegra30_iram_end
828 tegra30_iram_end:
829 b .
830 #endif