arch/mips/sgi-ip27/ip27-irq.c

   1 /*
   2  * ip27-irq.c: Highlevel interrupt handling for IP27 architecture.
   3  *
   4  * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
   5  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
   6  * Copyright (C) 1999 - 2001 Kanoj Sarcar
   7  */
   8
   9 #undef DEBUG
  10
  11 #include <linux/init.h>
  12 #include <linux/irq.h>
  13 #include <linux/errno.h>
  14 #include <linux/signal.h>
  15 #include <linux/sched.h>
  16 #include <linux/types.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/ioport.h>
  19 #include <linux/timex.h>
  20 #include <linux/smp.h>
  21 #include <linux/random.h>
  22 #include <linux/kernel.h>
  23 #include <linux/kernel_stat.h>
  24 #include <linux/delay.h>
  25 #include <linux/bitops.h>
  26
  27 #include <asm/bootinfo.h>
  28 #include <asm/io.h>
  29 #include <asm/mipsregs.h>
  30
  31 #include <asm/processor.h>
  32 #include <asm/sn/addrs.h>
  33 #include <asm/sn/agent.h>
  34 #include <asm/sn/arch.h>
  35 #include <asm/sn/hub.h>
  36 #include <asm/sn/intr.h>
  37
  38 /*
  39  * Linux has a controller-independent x86 interrupt architecture.
  40  * every controller has a 'controller-template', that is used
  41  * by the main code to do the right thing. Each driver-visible
  42  * interrupt source is transparently wired to the appropriate
  43  * controller. Thus drivers need not be aware of the
  44  * interrupt-controller.
  45  *
  46  * Various interrupt controllers we handle: 8259 PIC, SMP IO-APIC,
  47  * PIIX4's internal 8259 PIC and SGI's Visual Workstation Cobalt (IO-)APIC.
  48  * (IO-APICs assumed to be messaging to Pentium local-APICs)
  49  *
  50  * the code is designed to be easily extended with new/different
  51  * interrupt controllers, without having to do assembly magic.
  52  */
  53
  54 extern asmlinkage void ip27_irq(void);
  55
  56 /*
  57  * Find first bit set
  58  */
  59 static int ms1bit(unsigned long x)
  60 {
  61         int b = 0, s;
  62
  63         s = 16; if (x >> 16 == 0) s = 0; b += s; x >>= s;
  64         s =  8; if (x >>  8 == 0) s = 0; b += s; x >>= s;
  65         s =  4; if (x >>  4 == 0) s = 0; b += s; x >>= s;
  66         s =  2; if (x >>  2 == 0) s = 0; b += s; x >>= s;
  67         s =  1; if (x >>  1 == 0) s = 0; b += s;
  68
  69         return b;
  70 }
  71
  72 /*
  73  * This code is unnecessarily complex, because we do
  74  * intr enabling. Basically, once we grab the set of intrs we need
  75  * to service, we must mask _all_ these interrupts; firstly, to make
  76  * sure the same intr does not intr again, causing recursion that
  77  * can lead to stack overflow. Secondly, we can not just mask the
  78  * one intr we are do_IRQing, because the non-masked intrs in the
  79  * first set might intr again, causing multiple servicings of the
  80  * same intr. This effect is mostly seen for intercpu intrs.
  81  * Kanoj 05.13.00
  82  */
  83
  84 static void ip27_do_irq_mask0(void)
  85 {
  86         int irq, swlevel;
  87         hubreg_t pend0, mask0;
  88         cpuid_t cpu = smp_processor_id();
  89         int pi_int_mask0 =
  90                 (cputoslice(cpu) == 0) ?  PI_INT_MASK0_A : PI_INT_MASK0_B;
  91
  92         /* copied from Irix intpend0() */
  93         pend0 = LOCAL_HUB_L(PI_INT_PEND0);
  94         mask0 = LOCAL_HUB_L(pi_int_mask0);
  95
  96         pend0 &= mask0;         /* Pick intrs we should look at */
  97         if (!pend0)
  98                 return;
  99
 100         swlevel = ms1bit(pend0);
 101 #ifdef CONFIG_SMP
 102         if (pend0 & (1UL << CPU_RESCHED_A_IRQ)) {
 103                 LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ);
 104                 scheduler_ipi();
 105         } else if (pend0 & (1UL << CPU_RESCHED_B_IRQ)) {
 106                 LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ);
 107                 scheduler_ipi();
 108         } else if (pend0 & (1UL << CPU_CALL_A_IRQ)) {
 109                 LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ);
 110                 smp_call_function_interrupt();
 111         } else if (pend0 & (1UL << CPU_CALL_B_IRQ)) {
 112                 LOCAL_HUB_CLR_INTR(CPU_CALL_B_IRQ);
 113                 smp_call_function_interrupt();
 114         } else
 115 #endif
 116         {
 117                 /* "map" swlevel to irq */
 118                 struct slice_data *si = cpu_data[cpu].data;
 119
 120                 irq = si->level_to_irq[swlevel];
 121                 do_IRQ(irq);
 122         }
 123
 124         LOCAL_HUB_L(PI_INT_PEND0);
 125 }
 126
 127 static void ip27_do_irq_mask1(void)
 128 {
 129         int irq, swlevel;
 130         hubreg_t pend1, mask1;
 131         cpuid_t cpu = smp_processor_id();
 132         int pi_int_mask1 = (cputoslice(cpu) == 0) ?  PI_INT_MASK1_A : PI_INT_MASK1_B;
 133         struct slice_data *si = cpu_data[cpu].data;
 134
 135         /* copied from Irix intpend0() */
 136         pend1 = LOCAL_HUB_L(PI_INT_PEND1);
 137         mask1 = LOCAL_HUB_L(pi_int_mask1);
 138
 139         pend1 &= mask1;         /* Pick intrs we should look at */
 140         if (!pend1)
 141                 return;
 142
 143         swlevel = ms1bit(pend1);
 144         /* "map" swlevel to irq */
 145         irq = si->level_to_irq[swlevel];
 146         LOCAL_HUB_CLR_INTR(swlevel);
 147         do_IRQ(irq);
 148
 149         LOCAL_HUB_L(PI_INT_PEND1);
 150 }
 151
 152 static void ip27_prof_timer(void)
 153 {
 154         panic("CPU %d got a profiling interrupt", smp_processor_id());
 155 }
 156
 157 static void ip27_hub_error(void)
 158 {
 159         panic("CPU %d got a hub error interrupt", smp_processor_id());
 160 }
 161
 162 asmlinkage void plat_irq_dispatch(void)
 163 {
 164         unsigned long pending = read_c0_cause() & read_c0_status();
 165         extern unsigned int rt_timer_irq;
 166
 167         if (pending & CAUSEF_IP4)
 168                 do_IRQ(rt_timer_irq);
 169         else if (pending & CAUSEF_IP2)  /* PI_INT_PEND_0 or CC_PEND_{A|B} */
 170                 ip27_do_irq_mask0();
 171         else if (pending & CAUSEF_IP3)  /* PI_INT_PEND_1 */
 172                 ip27_do_irq_mask1();
 173         else if (pending & CAUSEF_IP5)
 174                 ip27_prof_timer();
 175         else if (pending & CAUSEF_IP6)
 176                 ip27_hub_error();
 177 }
 178
 179 void __init arch_init_irq(void)
 180 {
 181 }
 182
 183 void install_ipi(void)
 184 {
 185         int slice = LOCAL_HUB_L(PI_CPU_NUM);
 186         int cpu = smp_processor_id();
 187         struct slice_data *si = cpu_data[cpu].data;
 188         struct hub_data *hub = hub_data(cpu_to_node(cpu));
 189         int resched, call;
 190
 191         resched = CPU_RESCHED_A_IRQ + slice;
 192         __set_bit(resched, hub->irq_alloc_mask);
 193         __set_bit(resched, si->irq_enable_mask);
 194         LOCAL_HUB_CLR_INTR(resched);
 195
 196         call = CPU_CALL_A_IRQ + slice;
 197         __set_bit(call, hub->irq_alloc_mask);
 198         __set_bit(call, si->irq_enable_mask);
 199         LOCAL_HUB_CLR_INTR(call);
 200
 201         if (slice == 0) {
 202                 LOCAL_HUB_S(PI_INT_MASK0_A, si->irq_enable_mask[0]);
 203                 LOCAL_HUB_S(PI_INT_MASK1_A, si->irq_enable_mask[1]);
 204         } else {
 205                 LOCAL_HUB_S(PI_INT_MASK0_B, si->irq_enable_mask[0]);
 206                 LOCAL_HUB_S(PI_INT_MASK1_B, si->irq_enable_mask[1]);
 207         }
 208 }