Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
[linux/fpc-iii.git] / arch / powerpc / boot / dts / ge_imp3a.dts
blobfefae416a097f26337e94cff8060d03f4b92fad8
1 /*
2  * GE IMP3A Device Tree Source
3  *
4  * Copyright 2010-2011 GE Intelligent Platforms Embedded Systems, Inc.
5  *
6  * This program is free software; you can redistribute  it and/or modify it
7  * under  the terms of  the GNU General  Public License as published by the
8  * Free Software Foundation;  either version 2 of the  License, or (at your
9  * option) any later version.
10  *
11  * Based on: P2020 DS Device Tree Source
12  * Copyright 2009 Freescale Semiconductor Inc.
13  */
15 /include/ "fsl/p2020si-pre.dtsi"
17 / {
18         model = "GE_IMP3A";
19         compatible = "ge,imp3a";
21         memory {
22                 device_type = "memory";
23         };
25         lbc: localbus@fef05000 {
26                 reg = <0 0xfef05000 0 0x1000>;
28                 ranges = <0x0 0x0 0x0 0xff000000 0x01000000
29                           0x1 0x0 0x0 0xe0000000 0x08000000
30                           0x2 0x0 0x0 0xe8000000 0x08000000
31                           0x3 0x0 0x0 0xfc100000 0x00020000
32                           0x4 0x0 0x0 0xfc000000 0x00008000
33                           0x5 0x0 0x0 0xfc008000 0x00008000
34                           0x6 0x0 0x0 0xfee00000 0x00040000
35                           0x7 0x0 0x0 0xfee80000 0x00040000>;
37                 /* nor@0,0 is a mirror of part of the memory in nor@1,0
38                 nor@0,0 {
39                         #address-cells = <1>;
40                         #size-cells = <1>;
41                         compatible = "ge,imp3a-firmware-mirror", "cfi-flash";
42                         reg = <0x0 0x0 0x1000000>;
43                         bank-width = <2>;
44                         device-width = <1>;
46                         partition@0 {
47                                 label = "firmware";
48                                 reg = <0x0 0x1000000>;
49                                 read-only;
50                         };
51                 };
52                 */
54                 nor@1,0 {
55                         #address-cells = <1>;
56                         #size-cells = <1>;
57                         compatible = "ge,imp3a-paged-flash", "cfi-flash";
58                         reg = <0x1 0x0 0x8000000>;
59                         bank-width = <2>;
60                         device-width = <1>;
62                         partition@0 {
63                                 label = "user";
64                                 reg = <0x0 0x7800000>;
65                         };
67                         partition@7800000 {
68                                 label = "firmware";
69                                 reg = <0x7800000 0x800000>;
70                                 read-only;
71                         };
72                 };
74                 nvram@3,0 {
75                         device_type = "nvram";
76                         compatible = "simtek,stk14ca8";
77                         reg = <0x3 0x0 0x20000>;
78                 };
80                 fpga@4,0 {
81                         compatible = "ge,imp3a-fpga-regs";
82                         reg = <0x4 0x0 0x20>;
83                 };
85                 gef_pic: pic@4,20 {
86                         #interrupt-cells = <1>;
87                         interrupt-controller;
88                         device_type = "interrupt-controller";
89                         compatible = "ge,imp3a-fpga-pic", "gef,fpga-pic-1.00";
90                         reg = <0x4 0x20 0x20>;
91                         interrupts = <6 7 0 0>;
92                 };
94                 gef_gpio: gpio@4,400 {
95                         #gpio-cells = <2>;
96                         compatible = "ge,imp3a-gpio";
97                         reg = <0x4 0x400 0x24>;
98                         gpio-controller;
99                 };
101                 wdt@4,800 {
102                         compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
103                                 "gef,fpga-wdt";
104                         reg = <0x4 0x800 0x8>;
105                         interrupts = <10 4>;
106                         interrupt-parent = <&gef_pic>;
107                 };
109                 /* Second watchdog available, driver currently supports one.
110                 wdt@4,808 {
111                         compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
112                                 "gef,fpga-wdt";
113                         reg = <0x4 0x808 0x8>;
114                         interrupts = <9 4>;
115                         interrupt-parent = <&gef_pic>;
116                 };
117                 */
119                 nand@6,0 {
120                         compatible = "fsl,elbc-fcm-nand";
121                         reg = <0x6 0x0 0x40000>;
122                 };
124                 nand@7,0 {
125                         compatible = "fsl,elbc-fcm-nand";
126                         reg = <0x7 0x0 0x40000>;
127                 };
128         };
130         soc: soc@fef00000 {
131                 ranges = <0x0 0 0xfef00000 0x100000>;
133                 i2c@3000 {
134                         hwmon@48 {
135                                 compatible = "national,lm92";
136                                 reg = <0x48>;
137                         };
139                         hwmon@4c {
140                                 compatible = "adi,adt7461";
141                                 reg = <0x4c>;
142                         };
144                         rtc@51 {
145                                 compatible = "epson,rx8581";
146                                 reg = <0x51>;
147                         };
149                         eti@6b {
150                                 compatible = "dallas,ds1682";
151                                 reg = <0x6b>;
152                         };
153                 };
155                 usb@22000 {
156                         phy_type = "ulpi";
157                         dr_mode = "host";
158                 };
160                 mdio@24520 {
161                         phy0: ethernet-phy@0 {
162                                 interrupt-parent = <&gef_pic>;
163                                 interrupts = <0xc 0x4>;
164                                 reg = <0x1>;
165                         };
166                         phy1: ethernet-phy@1 {
167                                 interrupt-parent = <&gef_pic>;
168                                 interrupts = <0xb 0x4>;
169                                 reg = <0x2>;
170                         };
171                         tbi0: tbi-phy@11 {
172                                 reg = <0x11>;
173                                 device_type = "tbi-phy";
174                         };
175                 };
177                 mdio@25520 {
178                         tbi1: tbi-phy@11 {
179                                 reg = <0x11>;
180                                 device_type = "tbi-phy";
181                         };
182                 };
184                 mdio@26520 {
185                         status = "disabled";
186                 };
188                 enet0: ethernet@24000 {
189                         tbi-handle = <&tbi0>;
190                         phy-handle = <&phy0>;
191                         phy-connection-type = "gmii";
192                 };
194                 enet1: ethernet@25000 {
195                         tbi-handle = <&tbi1>;
196                         phy-handle = <&phy1>;
197                         phy-connection-type = "gmii";
198                 };
200                 enet2: ethernet@26000 {
201                         status = "disabled";
202                 };
203         };
205         pci0: pcie@fef08000 {
206                 ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
207                           0x1000000 0x0 0x00000000 0 0xfe020000 0x0 0x10000>;
208                 reg = <0 0xfef08000 0 0x1000>;
210                 pcie@0 {
211                         ranges = <0x2000000 0x0 0xc0000000
212                                   0x2000000 0x0 0xc0000000
213                                   0x0 0x20000000
215                                   0x1000000 0x0 0x0
216                                   0x1000000 0x0 0x0
217                                   0x0 0x10000>;
218                 };
219         };
221         pci1: pcie@fef09000 {
222                 reg = <0 0xfef09000 0 0x1000>;
223                 ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
224                           0x1000000 0x0 0x00000000 0 0xfe010000 0x0 0x10000>;
226                 pcie@0 {
227                         ranges = <0x2000000 0x0 0xa0000000
228                                   0x2000000 0x0 0xa0000000
229                                   0x0 0x20000000
231                                   0x1000000 0x0 0x0
232                                   0x1000000 0x0 0x0
233                                   0x0 0x10000>;
234                 };
236         };
238         pci2: pcie@fef0a000 {
239                 reg = <0 0xfef0a000 0 0x1000>;
240                 ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
241                           0x1000000 0x0 0x00000000 0 0xfe000000 0x0 0x10000>;
243                 pcie@0 {
244                         ranges = <0x2000000 0x0 0x80000000
245                                   0x2000000 0x0 0x80000000
246                                   0x0 0x20000000
248                                   0x1000000 0x0 0x0
249                                   0x1000000 0x0 0x0
250                                   0x0 0x10000>;
251                 };
252         };
255 /include/ "fsl/p2020si-post.dtsi"