arch/x86/boot/Makefile

   1 #
   2 # arch/x86/boot/Makefile
   3 #
   4 # This file is subject to the terms and conditions of the GNU General Public
   5 # License.  See the file "COPYING" in the main directory of this archive
   6 # for more details.
   7 #
   8 # Copyright (C) 1994 by Linus Torvalds
   9 # Changed by many, many contributors over the years.
  10 #
  11
  12 # If you want to preset the SVGA mode, uncomment the next line and
  13 # set SVGA_MODE to whatever number you want.
  14 # Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
  15 # The number is the same as you would ordinarily press at bootup.
  16
  17 SVGA_MODE       := -DSVGA_MODE=NORMAL_VGA
  18
  19 targets         := vmlinux.bin setup.bin setup.elf bzImage
  20 targets         += fdimage fdimage144 fdimage288 image.iso mtools.conf
  21 subdir-         := compressed
  22
  23 setup-y         += a20.o bioscall.o cmdline.o copy.o cpu.o cpuflags.o cpucheck.o
  24 setup-y         += early_serial_console.o edd.o header.o main.o mca.o memory.o
  25 setup-y         += pm.o pmjump.o printf.o regs.o string.o tty.o video.o
  26 setup-y         += video-mode.o version.o
  27 setup-$(CONFIG_X86_APM_BOOT) += apm.o
  28
  29 # The link order of the video-*.o modules can matter.  In particular,
  30 # video-vga.o *must* be listed first, followed by video-vesa.o.
  31 # Hardware-specific drivers should follow in the order they should be
  32 # probed, and video-bios.o should typically be last.
  33 setup-y         += video-vga.o
  34 setup-y         += video-vesa.o
  35 setup-y         += video-bios.o
  36
  37 targets         += $(setup-y)
  38 hostprogs-y     := mkcpustr tools/build
  39
  40 HOST_EXTRACFLAGS += -I$(srctree)/tools/include \
  41                     -include include/generated/autoconf.h \
  42                     -D__EXPORTED_HEADERS__
  43
  44 $(obj)/cpu.o: $(obj)/cpustr.h
  45
  46 quiet_cmd_cpustr = CPUSTR  $@
  47       cmd_cpustr = $(obj)/mkcpustr > $@
  48 targets         += cpustr.h
  49 $(obj)/cpustr.h: $(obj)/mkcpustr FORCE
  50         $(call if_changed,cpustr)
  51
  52 # ---------------------------------------------------------------------------
  53
  54 KBUILD_CFLAGS   := $(USERINCLUDE) $(REALMODE_CFLAGS) -D_SETUP
  55 KBUILD_AFLAGS   := $(KBUILD_CFLAGS) -D__ASSEMBLY__
  56 GCOV_PROFILE := n
  57
  58 $(obj)/bzImage: asflags-y  := $(SVGA_MODE)
  59
  60 quiet_cmd_image = BUILD   $@
  61 cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin \
  62                                $(obj)/zoffset.h $@
  63
  64 $(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
  65         $(call if_changed,image)
  66         @echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
  67
  68 OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
  69 $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
  70         $(call if_changed,objcopy)
  71
  72 SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
  73
  74 sed-voffset := -e 's/^\([0-9a-fA-F]*\) . \(_text\|_end\)$$/\#define VO_\2 0x\1/p'
  75
  76 quiet_cmd_voffset = VOFFSET $@
  77       cmd_voffset = $(NM) $< | sed -n $(sed-voffset) > $@
  78
  79 targets += voffset.h
  80 $(obj)/voffset.h: vmlinux FORCE
  81         $(call if_changed,voffset)
  82
  83 sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|startup_64\|efi_pe_entry\|efi_stub_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
  84
  85 quiet_cmd_zoffset = ZOFFSET $@
  86       cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
  87
  88 targets += zoffset.h
  89 $(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE
  90         $(call if_changed,zoffset)
  91
  92
  93 AFLAGS_header.o += -I$(obj)
  94 $(obj)/header.o: $(obj)/voffset.h $(obj)/zoffset.h
  95
  96 LDFLAGS_setup.elf       := -T
  97 $(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
  98         $(call if_changed,ld)
  99
 100 OBJCOPYFLAGS_setup.bin  := -O binary
 101 $(obj)/setup.bin: $(obj)/setup.elf FORCE
 102         $(call if_changed,objcopy)
 103
 104 $(obj)/compressed/vmlinux: FORCE
 105         $(Q)$(MAKE) $(build)=$(obj)/compressed $@
 106
 107 # Set this if you want to pass append arguments to the
 108 # bzdisk/fdimage/isoimage kernel
 109 FDARGS =
 110 # Set this if you want an initrd included with the
 111 # bzdisk/fdimage/isoimage kernel
 112 FDINITRD =
 113
 114 image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
 115
 116 $(obj)/mtools.conf: $(src)/mtools.conf.in
 117         sed -e 's|@OBJ@|$(obj)|g' < $< > $@
 118
 119 # This requires write access to /dev/fd0
 120 bzdisk: $(obj)/bzImage $(obj)/mtools.conf
 121         MTOOLSRC=$(obj)/mtools.conf mformat a:                  ; sync
 122         syslinux /dev/fd0                                       ; sync
 123         echo '$(image_cmdline)' | \
 124                 MTOOLSRC=$(src)/mtools.conf mcopy - a:syslinux.cfg
 125         if [ -f '$(FDINITRD)' ] ; then \
 126                 MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \
 127         fi
 128         MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage a:linux        ; sync
 129
 130 # These require being root or having syslinux 2.02 or higher installed
 131 fdimage fdimage144: $(obj)/bzImage $(obj)/mtools.conf
 132         dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
 133         MTOOLSRC=$(obj)/mtools.conf mformat v:                  ; sync
 134         syslinux $(obj)/fdimage                                 ; sync
 135         echo '$(image_cmdline)' | \
 136                 MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
 137         if [ -f '$(FDINITRD)' ] ; then \
 138                 MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \
 139         fi
 140         MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage v:linux        ; sync
 141
 142 fdimage288: $(obj)/bzImage $(obj)/mtools.conf
 143         dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
 144         MTOOLSRC=$(obj)/mtools.conf mformat w:                  ; sync
 145         syslinux $(obj)/fdimage                                 ; sync
 146         echo '$(image_cmdline)' | \
 147                 MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
 148         if [ -f '$(FDINITRD)' ] ; then \
 149                 MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \
 150         fi
 151         MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage w:linux        ; sync
 152
 153 isoimage: $(obj)/bzImage
 154         -rm -rf $(obj)/isoimage
 155         mkdir $(obj)/isoimage
 156         for i in lib lib64 share end ; do \
 157                 if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
 158                         cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
 159                         break ; \
 160                 fi ; \
 161                 if [ $$i = end ] ; then exit 1 ; fi ; \
 162         done
 163         cp $(obj)/bzImage $(obj)/isoimage/linux
 164         echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
 165         if [ -f '$(FDINITRD)' ] ; then \
 166                 cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \
 167         fi
 168         mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
 169                 -no-emul-boot -boot-load-size 4 -boot-info-table \
 170                 $(obj)/isoimage
 171         isohybrid $(obj)/image.iso 2>/dev/null || true
 172         rm -rf $(obj)/isoimage
 173
 174 bzlilo: $(obj)/bzImage
 175         if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
 176         if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
 177         cat $(obj)/bzImage > $(INSTALL_PATH)/vmlinuz
 178         cp System.map $(INSTALL_PATH)/
 179         if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
 180
 181 install:
 182         sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(obj)/bzImage \
 183                 System.map "$(INSTALL_PATH)"