Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
[linux/fpc-iii.git] / drivers / gpio / gpio-janz-ttl.c
blob2ecd3a09c743e6dba7434c9cbfab0e5c70bc24c3
1 /*
2 * Janz MODULbus VMOD-TTL GPIO Driver
4 * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/init.h>
15 #include <linux/interrupt.h>
16 #include <linux/delay.h>
17 #include <linux/platform_device.h>
18 #include <linux/io.h>
19 #include <linux/gpio.h>
20 #include <linux/slab.h>
22 #include <linux/mfd/janz.h>
24 #define DRV_NAME "janz-ttl"
26 #define PORTA_DIRECTION 0x23
27 #define PORTB_DIRECTION 0x2B
28 #define PORTC_DIRECTION 0x06
29 #define PORTA_IOCTL 0x24
30 #define PORTB_IOCTL 0x2C
31 #define PORTC_IOCTL 0x07
33 #define MASTER_INT_CTL 0x00
34 #define MASTER_CONF_CTL 0x01
36 #define CONF_PAE (1 << 2)
37 #define CONF_PBE (1 << 7)
38 #define CONF_PCE (1 << 4)
40 struct ttl_control_regs {
41 __be16 portc;
42 __be16 portb;
43 __be16 porta;
44 __be16 control;
47 struct ttl_module {
48 struct gpio_chip gpio;
50 /* base address of registers */
51 struct ttl_control_regs __iomem *regs;
53 u8 portc_shadow;
54 u8 portb_shadow;
55 u8 porta_shadow;
57 spinlock_t lock;
60 static int ttl_get_value(struct gpio_chip *gpio, unsigned offset)
62 struct ttl_module *mod = dev_get_drvdata(gpio->dev);
63 u8 *shadow;
64 int ret;
66 if (offset < 8) {
67 shadow = &mod->porta_shadow;
68 } else if (offset < 16) {
69 shadow = &mod->portb_shadow;
70 offset -= 8;
71 } else {
72 shadow = &mod->portc_shadow;
73 offset -= 16;
76 spin_lock(&mod->lock);
77 ret = *shadow & (1 << offset);
78 spin_unlock(&mod->lock);
79 return ret;
82 static void ttl_set_value(struct gpio_chip *gpio, unsigned offset, int value)
84 struct ttl_module *mod = dev_get_drvdata(gpio->dev);
85 void __iomem *port;
86 u8 *shadow;
88 if (offset < 8) {
89 port = &mod->regs->porta;
90 shadow = &mod->porta_shadow;
91 } else if (offset < 16) {
92 port = &mod->regs->portb;
93 shadow = &mod->portb_shadow;
94 offset -= 8;
95 } else {
96 port = &mod->regs->portc;
97 shadow = &mod->portc_shadow;
98 offset -= 16;
101 spin_lock(&mod->lock);
102 if (value)
103 *shadow |= (1 << offset);
104 else
105 *shadow &= ~(1 << offset);
107 iowrite16be(*shadow, port);
108 spin_unlock(&mod->lock);
111 static void ttl_write_reg(struct ttl_module *mod, u8 reg, u16 val)
113 iowrite16be(reg, &mod->regs->control);
114 iowrite16be(val, &mod->regs->control);
117 static void ttl_setup_device(struct ttl_module *mod)
119 /* reset the device to a known state */
120 iowrite16be(0x0000, &mod->regs->control);
121 iowrite16be(0x0001, &mod->regs->control);
122 iowrite16be(0x0000, &mod->regs->control);
124 /* put all ports in open-drain mode */
125 ttl_write_reg(mod, PORTA_IOCTL, 0x00ff);
126 ttl_write_reg(mod, PORTB_IOCTL, 0x00ff);
127 ttl_write_reg(mod, PORTC_IOCTL, 0x000f);
129 /* set all ports as outputs */
130 ttl_write_reg(mod, PORTA_DIRECTION, 0x0000);
131 ttl_write_reg(mod, PORTB_DIRECTION, 0x0000);
132 ttl_write_reg(mod, PORTC_DIRECTION, 0x0000);
134 /* set all ports to drive zeroes */
135 iowrite16be(0x0000, &mod->regs->porta);
136 iowrite16be(0x0000, &mod->regs->portb);
137 iowrite16be(0x0000, &mod->regs->portc);
139 /* enable all ports */
140 ttl_write_reg(mod, MASTER_CONF_CTL, CONF_PAE | CONF_PBE | CONF_PCE);
143 static int ttl_probe(struct platform_device *pdev)
145 struct janz_platform_data *pdata;
146 struct device *dev = &pdev->dev;
147 struct ttl_module *mod;
148 struct gpio_chip *gpio;
149 struct resource *res;
150 int ret;
152 pdata = dev_get_platdata(&pdev->dev);
153 if (!pdata) {
154 dev_err(dev, "no platform data\n");
155 ret = -ENXIO;
156 goto out_return;
159 mod = kzalloc(sizeof(*mod), GFP_KERNEL);
160 if (!mod) {
161 dev_err(dev, "unable to allocate private data\n");
162 ret = -ENOMEM;
163 goto out_return;
166 platform_set_drvdata(pdev, mod);
167 spin_lock_init(&mod->lock);
169 /* get access to the MODULbus registers for this module */
170 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
171 if (!res) {
172 dev_err(dev, "MODULbus registers not found\n");
173 ret = -ENODEV;
174 goto out_free_mod;
177 mod->regs = ioremap(res->start, resource_size(res));
178 if (!mod->regs) {
179 dev_err(dev, "MODULbus registers not ioremap\n");
180 ret = -ENOMEM;
181 goto out_free_mod;
184 ttl_setup_device(mod);
186 /* Initialize the GPIO data structures */
187 gpio = &mod->gpio;
188 gpio->dev = &pdev->dev;
189 gpio->label = pdev->name;
190 gpio->get = ttl_get_value;
191 gpio->set = ttl_set_value;
192 gpio->owner = THIS_MODULE;
194 /* request dynamic allocation */
195 gpio->base = -1;
196 gpio->ngpio = 20;
198 ret = gpiochip_add(gpio);
199 if (ret) {
200 dev_err(dev, "unable to add GPIO chip\n");
201 goto out_iounmap_regs;
204 return 0;
206 out_iounmap_regs:
207 iounmap(mod->regs);
208 out_free_mod:
209 kfree(mod);
210 out_return:
211 return ret;
214 static int ttl_remove(struct platform_device *pdev)
216 struct ttl_module *mod = platform_get_drvdata(pdev);
217 struct device *dev = &pdev->dev;
218 int ret;
220 ret = gpiochip_remove(&mod->gpio);
221 if (ret) {
222 dev_err(dev, "unable to remove GPIO chip\n");
223 return ret;
226 iounmap(mod->regs);
227 kfree(mod);
228 return 0;
231 static struct platform_driver ttl_driver = {
232 .driver = {
233 .name = DRV_NAME,
234 .owner = THIS_MODULE,
236 .probe = ttl_probe,
237 .remove = ttl_remove,
240 module_platform_driver(ttl_driver);
242 MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
243 MODULE_DESCRIPTION("Janz MODULbus VMOD-TTL Driver");
244 MODULE_LICENSE("GPL");
245 MODULE_ALIAS("platform:janz-ttl");