drivers/staging/bcm/InterfaceIdleMode.c

   1 #include "headers.h"
   2
   3 /*
   4 Function:       InterfaceIdleModeWakeup
   5
   6 Description:    This is the hardware specific Function for
   7                 waking up HW device from Idle mode.
   8                 A software abort pattern is written to the
   9                 device to wake it and necessary power state
  10                 transitions from host are performed here.
  11
  12 Input parameters: IN struct bcm_mini_adapter *Adapter
  13                   - Miniport Adapter Context
  14
  15 Return:         BCM_STATUS_SUCCESS - If Wakeup of the HW Interface
  16                                      was successful.
  17                 Other              - If an error occurred.
  18 */
  19
  20 /*
  21 Function:       InterfaceIdleModeRespond
  22
  23 Description:    This is the hardware specific Function for
  24                 responding to Idle mode request from target.
  25                 Necessary power state transitions from host for
  26                 idle mode or other device specific initializations
  27                 are performed here.
  28
  29 Input parameters: IN struct bcm_mini_adapter * Adapter
  30                   - Miniport Adapter Context
  31
  32 Return:         BCM_STATUS_SUCCESS - If Idle mode response related
  33                                      HW configuration was successful.
  34                 Other              - If an error occurred.
  35 */
  36
  37 /*
  38 "dmem bfc02f00  100" tells how many time device went in Idle mode.
  39 this value will be at address bfc02fa4.just before value d0ea1dle.
  40
  41 Set time value by writing at bfc02f98 7d0
  42
  43 checking the Ack timer expire on kannon by running command
  44 d qcslog .. if it shows e means host has not send response
  45 to f/w with in 200 ms. Response should be
  46 send to f/w with in 200 ms after the Idle/Shutdown req issued
  47
  48 */
  49
  50
  51 int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter,
  52                         unsigned int *puiBuffer)
  53 {
  54         int     status = STATUS_SUCCESS;
  55         unsigned int    uiRegRead = 0;
  56         int bytes;
  57
  58         if (ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD) {
  59                 if (ntohl(*(puiBuffer+1)) == 0) {
  60
  61                         status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC,
  62                                         &uiRegRead, sizeof(uiRegRead));
  63                         if (status)
  64                                 return status;
  65
  66                         if (Adapter->ulPowerSaveMode ==
  67                                 DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
  68                                 uiRegRead = 0x00000000;
  69                                 status = wrmalt(Adapter,
  70                                         DEBUG_INTERRUPT_GENERATOR_REGISTOR,
  71                                         &uiRegRead, sizeof(uiRegRead));
  72                                 if (status)
  73                                         return status;
  74                         }
  75                         /* Below Register should not br read in case of
  76                          * Manual and Protocol Idle mode */
  77                         else if (Adapter->ulPowerSaveMode !=
  78                                 DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
  79                                 /* clear on read Register */
  80                                 bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0,
  81                                         &uiRegRead, sizeof(uiRegRead));
  82                                 if (bytes < 0) {
  83                                         status = bytes;
  84                                         return status;
  85                                 }
  86                                 /* clear on read Register */
  87                                 bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1,
  88                                         &uiRegRead, sizeof(uiRegRead));
  89                                 if (bytes < 0) {
  90                                         status = bytes;
  91                                         return status;
  92                                 }
  93                         }
  94
  95                         /* Set Idle Mode Flag to False and
  96                          * Clear IdleMode reg. */
  97                         Adapter->IdleMode = false;
  98                         Adapter->bTriedToWakeUpFromlowPowerMode = false;
  99
 100                         wake_up(&Adapter->lowpower_mode_wait_queue);
 101
 102                 } else {
 103                         if (TRUE == Adapter->IdleMode)
 104                                 return status;
 105
 106                         uiRegRead = 0;
 107
 108                         if (Adapter->chip_id == BCS220_2 ||
 109                                 Adapter->chip_id == BCS220_2BC ||
 110                                         Adapter->chip_id == BCS250_BC ||
 111                                         Adapter->chip_id == BCS220_3) {
 112
 113                                 bytes = rdmalt(Adapter, HPM_CONFIG_MSW,
 114                                         &uiRegRead, sizeof(uiRegRead));
 115                                 if (bytes < 0) {
 116                                         status = bytes;
 117                                         return status;
 118                                 }
 119
 120
 121                                 uiRegRead |= (1<<17);
 122
 123                                 status = wrmalt(Adapter, HPM_CONFIG_MSW,
 124                                         &uiRegRead, sizeof(uiRegRead));
 125                                 if (status)
 126                                         return status;
 127                         }
 128                         SendIdleModeResponse(Adapter);
 129                 }
 130         } else if (ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG) {
 131                 OverrideServiceFlowParams(Adapter, puiBuffer);
 132         }
 133         return status;
 134 }
 135
 136 static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter,
 137                                 unsigned int Pattern)
 138 {
 139         int status = STATUS_SUCCESS;
 140         unsigned int value;
 141         unsigned int chip_id;
 142         unsigned long timeout = 0, itr = 0;
 143
 144         int lenwritten = 0;
 145         unsigned char aucAbortPattern[8] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
 146                                                 0xFF, 0xFF, 0xFF};
 147         struct bcm_interface_adapter *psInterfaceAdapter =
 148                                 Adapter->pvInterfaceAdapter;
 149
 150         /* Abort Bus suspend if its already suspended */
 151         if ((TRUE == psInterfaceAdapter->bSuspended) &&
 152                         (TRUE == Adapter->bDoSuspend))
 153                 status = usb_autopm_get_interface(
 154                                 psInterfaceAdapter->interface);
 155
 156         if ((Adapter->ulPowerSaveMode ==
 157                         DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) ||
 158            (Adapter->ulPowerSaveMode ==
 159                         DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)) {
 160                 /* write the SW abort pattern. */
 161                 status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC,
 162                                 &Pattern, sizeof(Pattern));
 163                 if (status)
 164                         return status;
 165         }
 166
 167         if (Adapter->ulPowerSaveMode ==
 168                 DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
 169                 value = 0x80000000;
 170                 status = wrmalt(Adapter,
 171                                 DEBUG_INTERRUPT_GENERATOR_REGISTOR,
 172                                 &value, sizeof(value));
 173                 if (status)
 174                         return status;
 175         } else if (Adapter->ulPowerSaveMode !=
 176                         DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
 177                 /*
 178                  * Get a Interrupt Out URB and send 8 Bytes Down
 179                  * To be Done in Thread Context.
 180                  * Not using Asynchronous Mechanism.
 181                  */
 182                 status = usb_interrupt_msg(psInterfaceAdapter->udev,
 183                         usb_sndintpipe(psInterfaceAdapter->udev,
 184                         psInterfaceAdapter->sIntrOut.int_out_endpointAddr),
 185                         aucAbortPattern,
 186                         8,
 187                         &lenwritten,
 188                         5000);
 189                 if (status)
 190                         return status;
 191                 else
 192                         BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
 193                                 IDLE_MODE, DBG_LVL_ALL,
 194                                 "NOB Sent down :%d", lenwritten);
 195
 196                 /* mdelay(25); */
 197
 198                 timeout = jiffies +  msecs_to_jiffies(50);
 199                 while (time_after(timeout, jiffies)) {
 200                         itr++;
 201                         rdmalt(Adapter, CHIP_ID_REG, &chip_id, sizeof(UINT));
 202                         if (0xbece3200 == (chip_id&~(0xF0)))
 203                                 chip_id = chip_id&~(0xF0);
 204                         if (chip_id == Adapter->chip_id)
 205                                 break;
 206                 }
 207                 if (time_before(timeout, jiffies))
 208                         BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
 209                                 IDLE_MODE, DBG_LVL_ALL,
 210                                 "Not able to read chip-id even after 25 msec");
 211                 else
 212                         BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
 213                                 IDLE_MODE, DBG_LVL_ALL,
 214                                 "Number of completed iteration to"
 215                                 "read chip-id :%lu", itr);
 216
 217                 status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC,
 218                                 &Pattern, sizeof(status));
 219                 if (status)
 220                         return status;
 221         }
 222         return status;
 223 }
 224 int InterfaceIdleModeWakeup(struct bcm_mini_adapter *Adapter)
 225 {
 226         ULONG   Status = 0;
 227         if (Adapter->bTriedToWakeUpFromlowPowerMode) {
 228                 BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
 229                 IDLE_MODE, DBG_LVL_ALL,
 230                 "Wake up already attempted.. ignoring\n");
 231         } else {
 232                 Adapter->bTriedToWakeUpFromlowPowerMode = TRUE;
 233                 InterfaceAbortIdlemode(Adapter, Adapter->usIdleModePattern);
 234
 235         }
 236         return Status;
 237 }
 238
 239 void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter)
 240 {
 241         unsigned int uiRegVal = 0;
 242         INT Status = 0;
 243         int bytes;
 244
 245         if (Adapter->ulPowerSaveMode ==
 246                 DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
 247                 /* clear idlemode interrupt. */
 248                 uiRegVal = 0;
 249                 Status = wrmalt(Adapter,
 250                         DEBUG_INTERRUPT_GENERATOR_REGISTOR,
 251                         &uiRegVal, sizeof(uiRegVal));
 252                 if (Status)
 253                         return;
 254         }
 255
 256         else {
 257
 258 /* clear Interrupt EP registers. */
 259                 bytes = rdmalt(Adapter,
 260                         DEVICE_INT_OUT_EP_REG0,
 261                         &uiRegVal, sizeof(uiRegVal));
 262                 if (bytes < 0) {
 263                         Status = bytes;
 264                         return;
 265                 }
 266
 267                 bytes = rdmalt(Adapter,
 268                         DEVICE_INT_OUT_EP_REG1,
 269                         &uiRegVal, sizeof(uiRegVal));
 270                 if (bytes < 0) {
 271                         Status = bytes;
 272                         return;
 273                 }
 274         }
 275 }
 276