2 * net/tipc/eth_media.c: Ethernet bearer support for TIPC
4 * Copyright (c) 2001-2007, Ericsson AB
5 * Copyright (c) 2005-2008, 2011-2013, Wind River Systems
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
40 #define MAX_ETH_MEDIA MAX_BEARERS
42 #define ETH_ADDR_OFFSET 4 /* message header offset of MAC address */
45 * struct eth_media - Ethernet bearer data structure
46 * @bearer: ptr to associated "generic" bearer structure
47 * @dev: ptr to associated Ethernet network device
48 * @tipc_packet_type: used in binding TIPC to Ethernet driver
49 * @setup: work item used when enabling bearer
50 * @cleanup: work item used when disabling bearer
53 struct tipc_bearer
*bearer
;
54 struct net_device
*dev
;
55 struct packet_type tipc_packet_type
;
56 struct work_struct setup
;
57 struct work_struct cleanup
;
60 static struct tipc_media eth_media_info
;
61 static struct eth_media eth_media_array
[MAX_ETH_MEDIA
];
62 static int eth_started
;
64 static int recv_notification(struct notifier_block
*nb
, unsigned long evt
,
67 * Network device notifier info
69 static struct notifier_block notifier
= {
70 .notifier_call
= recv_notification
,
75 * eth_media_addr_set - initialize Ethernet media address structure
77 * Media-dependent "value" field stores MAC address in first 6 bytes
78 * and zeroes out the remaining bytes.
80 static void eth_media_addr_set(const struct tipc_bearer
*tb_ptr
,
81 struct tipc_media_addr
*a
, char *mac
)
83 memcpy(a
->value
, mac
, ETH_ALEN
);
84 memset(a
->value
+ ETH_ALEN
, 0, sizeof(a
->value
) - ETH_ALEN
);
85 a
->media_id
= TIPC_MEDIA_TYPE_ETH
;
86 a
->broadcast
= !memcmp(mac
, tb_ptr
->bcast_addr
.value
, ETH_ALEN
);
90 * send_msg - send a TIPC message out over an Ethernet interface
92 static int send_msg(struct sk_buff
*buf
, struct tipc_bearer
*tb_ptr
,
93 struct tipc_media_addr
*dest
)
95 struct sk_buff
*clone
;
96 struct net_device
*dev
;
99 clone
= skb_clone(buf
, GFP_ATOMIC
);
103 dev
= ((struct eth_media
*)(tb_ptr
->usr_handle
))->dev
;
104 delta
= dev
->hard_header_len
- skb_headroom(buf
);
107 pskb_expand_head(clone
, SKB_DATA_ALIGN(delta
), 0, GFP_ATOMIC
)) {
112 skb_reset_network_header(clone
);
114 clone
->protocol
= htons(ETH_P_TIPC
);
115 dev_hard_header(clone
, dev
, ETH_P_TIPC
, dest
->value
,
116 dev
->dev_addr
, clone
->len
);
117 dev_queue_xmit(clone
);
122 * recv_msg - handle incoming TIPC message from an Ethernet interface
124 * Accept only packets explicitly sent to this node, or broadcast packets;
125 * ignores packets sent using Ethernet multicast, and traffic sent to other
126 * nodes (which can happen if interface is running in promiscuous mode).
128 static int recv_msg(struct sk_buff
*buf
, struct net_device
*dev
,
129 struct packet_type
*pt
, struct net_device
*orig_dev
)
131 struct eth_media
*eb_ptr
= (struct eth_media
*)pt
->af_packet_priv
;
133 if (!net_eq(dev_net(dev
), &init_net
)) {
138 if (likely(eb_ptr
->bearer
)) {
139 if (likely(buf
->pkt_type
<= PACKET_BROADCAST
)) {
141 tipc_recv_msg(buf
, eb_ptr
->bearer
);
142 return NET_RX_SUCCESS
;
150 * setup_media - setup association between Ethernet bearer and interface
152 static void setup_media(struct work_struct
*work
)
154 struct eth_media
*eb_ptr
=
155 container_of(work
, struct eth_media
, setup
);
157 dev_add_pack(&eb_ptr
->tipc_packet_type
);
161 * enable_media - attach TIPC bearer to an Ethernet interface
163 static int enable_media(struct tipc_bearer
*tb_ptr
)
165 struct net_device
*dev
;
166 struct eth_media
*eb_ptr
= ð_media_array
[0];
167 struct eth_media
*stop
= ð_media_array
[MAX_ETH_MEDIA
];
168 char *driver_name
= strchr((const char *)tb_ptr
->name
, ':') + 1;
171 /* Find unused Ethernet bearer structure */
172 while (eb_ptr
->dev
) {
175 if (++eb_ptr
== stop
)
176 return pending_dev
? -EAGAIN
: -EDQUOT
;
179 /* Find device with specified name */
180 dev
= dev_get_by_name(&init_net
, driver_name
);
184 /* Create Ethernet bearer for device */
186 eb_ptr
->tipc_packet_type
.type
= htons(ETH_P_TIPC
);
187 eb_ptr
->tipc_packet_type
.dev
= dev
;
188 eb_ptr
->tipc_packet_type
.func
= recv_msg
;
189 eb_ptr
->tipc_packet_type
.af_packet_priv
= eb_ptr
;
190 INIT_LIST_HEAD(&(eb_ptr
->tipc_packet_type
.list
));
191 INIT_WORK(&eb_ptr
->setup
, setup_media
);
192 schedule_work(&eb_ptr
->setup
);
194 /* Associate TIPC bearer with Ethernet bearer */
195 eb_ptr
->bearer
= tb_ptr
;
196 tb_ptr
->usr_handle
= (void *)eb_ptr
;
197 memset(tb_ptr
->bcast_addr
.value
, 0, sizeof(tb_ptr
->bcast_addr
.value
));
198 memcpy(tb_ptr
->bcast_addr
.value
, dev
->broadcast
, ETH_ALEN
);
199 tb_ptr
->bcast_addr
.media_id
= TIPC_MEDIA_TYPE_ETH
;
200 tb_ptr
->bcast_addr
.broadcast
= 1;
201 tb_ptr
->mtu
= dev
->mtu
;
203 eth_media_addr_set(tb_ptr
, &tb_ptr
->addr
, (char *)dev
->dev_addr
);
208 * cleanup_media - break association between Ethernet bearer and interface
210 * This routine must be invoked from a work queue because it can sleep.
212 static void cleanup_media(struct work_struct
*work
)
214 struct eth_media
*eb_ptr
=
215 container_of(work
, struct eth_media
, cleanup
);
217 dev_remove_pack(&eb_ptr
->tipc_packet_type
);
218 dev_put(eb_ptr
->dev
);
223 * disable_media - detach TIPC bearer from an Ethernet interface
225 * Mark Ethernet bearer as inactive so that incoming buffers are thrown away,
226 * then get worker thread to complete bearer cleanup. (Can't do cleanup
227 * here because cleanup code needs to sleep and caller holds spinlocks.)
229 static void disable_media(struct tipc_bearer
*tb_ptr
)
231 struct eth_media
*eb_ptr
= (struct eth_media
*)tb_ptr
->usr_handle
;
233 eb_ptr
->bearer
= NULL
;
234 INIT_WORK(&eb_ptr
->cleanup
, cleanup_media
);
235 schedule_work(&eb_ptr
->cleanup
);
239 * recv_notification - handle device updates from OS
241 * Change the state of the Ethernet bearer (if any) associated with the
244 static int recv_notification(struct notifier_block
*nb
, unsigned long evt
,
247 struct net_device
*dev
= netdev_notifier_info_to_dev(ptr
);
248 struct eth_media
*eb_ptr
= ð_media_array
[0];
249 struct eth_media
*stop
= ð_media_array
[MAX_ETH_MEDIA
];
251 if (!net_eq(dev_net(dev
), &init_net
))
254 while ((eb_ptr
->dev
!= dev
)) {
255 if (++eb_ptr
== stop
)
256 return NOTIFY_DONE
; /* couldn't find device */
259 return NOTIFY_DONE
; /* bearer had been disabled */
261 eb_ptr
->bearer
->mtu
= dev
->mtu
;
265 if (netif_carrier_ok(dev
))
266 tipc_continue(eb_ptr
->bearer
);
268 tipc_block_bearer(eb_ptr
->bearer
);
271 tipc_continue(eb_ptr
->bearer
);
274 tipc_block_bearer(eb_ptr
->bearer
);
276 case NETDEV_CHANGEMTU
:
277 case NETDEV_CHANGEADDR
:
278 tipc_block_bearer(eb_ptr
->bearer
);
279 tipc_continue(eb_ptr
->bearer
);
281 case NETDEV_UNREGISTER
:
282 case NETDEV_CHANGENAME
:
283 tipc_disable_bearer(eb_ptr
->bearer
->name
);
290 * eth_addr2str - convert Ethernet address to string
292 static int eth_addr2str(struct tipc_media_addr
*a
, char *str_buf
, int str_size
)
294 if (str_size
< 18) /* 18 = strlen("aa:bb:cc:dd:ee:ff\0") */
297 sprintf(str_buf
, "%pM", a
->value
);
302 * eth_str2addr - convert Ethernet address format to message header format
304 static int eth_addr2msg(struct tipc_media_addr
*a
, char *msg_area
)
306 memset(msg_area
, 0, TIPC_MEDIA_ADDR_SIZE
);
307 msg_area
[TIPC_MEDIA_TYPE_OFFSET
] = TIPC_MEDIA_TYPE_ETH
;
308 memcpy(msg_area
+ ETH_ADDR_OFFSET
, a
->value
, ETH_ALEN
);
313 * eth_str2addr - convert message header address format to Ethernet format
315 static int eth_msg2addr(const struct tipc_bearer
*tb_ptr
,
316 struct tipc_media_addr
*a
, char *msg_area
)
318 if (msg_area
[TIPC_MEDIA_TYPE_OFFSET
] != TIPC_MEDIA_TYPE_ETH
)
321 eth_media_addr_set(tb_ptr
, a
, msg_area
+ ETH_ADDR_OFFSET
);
326 * Ethernet media registration info
328 static struct tipc_media eth_media_info
= {
329 .send_msg
= send_msg
,
330 .enable_media
= enable_media
,
331 .disable_media
= disable_media
,
332 .addr2str
= eth_addr2str
,
333 .addr2msg
= eth_addr2msg
,
334 .msg2addr
= eth_msg2addr
,
335 .priority
= TIPC_DEF_LINK_PRI
,
336 .tolerance
= TIPC_DEF_LINK_TOL
,
337 .window
= TIPC_DEF_LINK_WIN
,
338 .type_id
= TIPC_MEDIA_TYPE_ETH
,
343 * tipc_eth_media_start - activate Ethernet bearer support
345 * Register Ethernet media type with TIPC bearer code. Also register
346 * with OS for notifications about device state changes.
348 int tipc_eth_media_start(void)
355 res
= tipc_register_media(ð_media_info
);
359 res
= register_netdevice_notifier(¬ifier
);
366 * tipc_eth_media_stop - deactivate Ethernet bearer support
368 void tipc_eth_media_stop(void)
373 flush_scheduled_work();
374 unregister_netdevice_notifier(¬ifier
);