?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
iommu/msm: Add iommu_group support
[linux/fpc-iii.git] / arch / sparc / kernel / leon_pci_grpci1.c
blob1e77128a8f881b9670342d17f7f67d44d38b8698
1 /*
2 * leon_pci_grpci1.c: GRPCI1 Host PCI driver
3 *
4 * Copyright (C) 2013 Aeroflex Gaisler AB
5 *
6 * This GRPCI1 driver does not support PCI interrupts taken from
7 * GPIO pins. Interrupt generation at PCI parity and system error
8 * detection is by default turned off since some GRPCI1 cores does
9 * not support detection. It can be turned on from the bootloader
10 * using the all_pci_errors property.
11 *
12 * Contributors: Daniel Hellstrom <daniel@gaisler.com>
13 */
14
15 #include <linux/of_device.h>
16 #include <linux/export.h>
17 #include <linux/kernel.h>
18 #include <linux/of_irq.h>
19 #include <linux/delay.h>
20 #include <linux/pci.h>
21
22 #include <asm/leon_pci.h>
23 #include <asm/sections.h>
24 #include <asm/vaddrs.h>
25 #include <asm/leon.h>
26 #include <asm/io.h>
27
28 #include "irq.h"
29
30 /* Enable/Disable Debugging Configuration Space Access */
31 #undef GRPCI1_DEBUG_CFGACCESS
32
33 /*
34 * GRPCI1 APB Register MAP
35 */
36 struct grpci1_regs {
37 unsigned int cfg_stat; /* 0x00 Configuration / Status */
38 unsigned int bar0; /* 0x04 BAR0 (RO) */
39 unsigned int page0; /* 0x08 PAGE0 (RO) */
40 unsigned int bar1; /* 0x0C BAR1 (RO) */
41 unsigned int page1; /* 0x10 PAGE1 */
42 unsigned int iomap; /* 0x14 IO Map */
43 unsigned int stat_cmd; /* 0x18 PCI Status & Command (RO) */
44 unsigned int irq; /* 0x1C Interrupt register */
45 };
46
47 #define REGLOAD(a) (be32_to_cpu(__raw_readl(&(a))))
48 #define REGSTORE(a, v) (__raw_writel(cpu_to_be32(v), &(a)))
49
50 #define PAGE0_BTEN_BIT 0
51 #define PAGE0_BTEN (1 << PAGE0_BTEN_BIT)
52
53 #define CFGSTAT_HOST_BIT 13
54 #define CFGSTAT_CTO_BIT 8
55 #define CFGSTAT_HOST (1 << CFGSTAT_HOST_BIT)
56 #define CFGSTAT_CTO (1 << CFGSTAT_CTO_BIT)
57
58 #define IRQ_DPE (1 << 9)
59 #define IRQ_SSE (1 << 8)
60 #define IRQ_RMA (1 << 7)
61 #define IRQ_RTA (1 << 6)
62 #define IRQ_STA (1 << 5)
63 #define IRQ_DPED (1 << 4)
64 #define IRQ_INTD (1 << 3)
65 #define IRQ_INTC (1 << 2)
66 #define IRQ_INTB (1 << 1)
67 #define IRQ_INTA (1 << 0)
68 #define IRQ_DEF_ERRORS (IRQ_RMA | IRQ_RTA | IRQ_STA)
69 #define IRQ_ALL_ERRORS (IRQ_DPED | IRQ_DEF_ERRORS | IRQ_SSE | IRQ_DPE)
70 #define IRQ_INTX (IRQ_INTA | IRQ_INTB | IRQ_INTC | IRQ_INTD)
71 #define IRQ_MASK_BIT 16
72
73 #define DEF_PCI_ERRORS (PCI_STATUS_SIG_TARGET_ABORT | \
74 PCI_STATUS_REC_TARGET_ABORT | \
75 PCI_STATUS_REC_MASTER_ABORT)
76 #define ALL_PCI_ERRORS (PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY | \
77 PCI_STATUS_SIG_SYSTEM_ERROR | DEF_PCI_ERRORS)
78
79 #define TGT 256
80
81 struct grpci1_priv {
82 struct leon_pci_info info; /* must be on top of this structure */
83 struct grpci1_regs __iomem *regs; /* GRPCI register map */
84 struct device *dev;
85 int pci_err_mask; /* STATUS register error mask */
86 int irq; /* LEON irqctrl GRPCI IRQ */
87 unsigned char irq_map[4]; /* GRPCI nexus PCI INTX# IRQs */
88 unsigned int irq_err; /* GRPCI nexus Virt Error IRQ */
89
90 /* AHB PCI Windows */
91 unsigned long pci_area; /* MEMORY */
92 unsigned long pci_area_end;
93 unsigned long pci_io; /* I/O */
94 unsigned long pci_conf; /* CONFIGURATION */
95 unsigned long pci_conf_end;
96 unsigned long pci_io_va;
97 };
98
99 static struct grpci1_priv *grpci1priv;
100
101 static int grpci1_cfg_w32(struct grpci1_priv *priv, unsigned int bus,
102 unsigned int devfn, int where, u32 val);
103
104 static int grpci1_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
105 {
106 struct grpci1_priv *priv = dev->bus->sysdata;
107 int irq_group;
108
109 /* Use default IRQ decoding on PCI BUS0 according slot numbering */
110 irq_group = slot & 0x3;
111 pin = ((pin - 1) + irq_group) & 0x3;
112
113 return priv->irq_map[pin];
114 }
115
116 static int grpci1_cfg_r32(struct grpci1_priv *priv, unsigned int bus,
117 unsigned int devfn, int where, u32 *val)
118 {
119 u32 *pci_conf, tmp, cfg;
120
121 if (where & 0x3)
122 return -EINVAL;
123
124 if (bus == 0) {
125 devfn += (0x8 * 6); /* start at AD16=Device0 */
126 } else if (bus == TGT) {
127 bus = 0;
128 devfn = 0; /* special case: bridge controller itself */
129 }
130
131 /* Select bus */
132 cfg = REGLOAD(priv->regs->cfg_stat);
133 REGSTORE(priv->regs->cfg_stat, (cfg & ~(0xf << 23)) | (bus << 23));
134
135 /* do read access */
136 pci_conf = (u32 *) (priv->pci_conf | (devfn << 8) | (where & 0xfc));
137 tmp = LEON3_BYPASS_LOAD_PA(pci_conf);
138
139 /* check if master abort was received */
140 if (REGLOAD(priv->regs->cfg_stat) & CFGSTAT_CTO) {
141 *val = 0xffffffff;
142 /* Clear Master abort bit in PCI cfg space (is set) */
143 tmp = REGLOAD(priv->regs->stat_cmd);
144 grpci1_cfg_w32(priv, TGT, 0, PCI_COMMAND, tmp);
145 } else {
146 /* Bus always little endian (unaffected by byte-swapping) */
147 *val = swab32(tmp);
148 }
149
150 return 0;
151 }
152
153 static int grpci1_cfg_r16(struct grpci1_priv *priv, unsigned int bus,
154 unsigned int devfn, int where, u32 *val)
155 {
156 u32 v;
157 int ret;
158
159 if (where & 0x1)
160 return -EINVAL;
161 ret = grpci1_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
162 *val = 0xffff & (v >> (8 * (where & 0x3)));
163 return ret;
164 }
165
166 static int grpci1_cfg_r8(struct grpci1_priv *priv, unsigned int bus,
167 unsigned int devfn, int where, u32 *val)
168 {
169 u32 v;
170 int ret;
171
172 ret = grpci1_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
173 *val = 0xff & (v >> (8 * (where & 3)));
174
175 return ret;
176 }
177
178 static int grpci1_cfg_w32(struct grpci1_priv *priv, unsigned int bus,
179 unsigned int devfn, int where, u32 val)
180 {
181 unsigned int *pci_conf;
182 u32 cfg;
183
184 if (where & 0x3)
185 return -EINVAL;
186
187 if (bus == 0) {
188 devfn += (0x8 * 6); /* start at AD16=Device0 */
189 } else if (bus == TGT) {
190 bus = 0;
191 devfn = 0; /* special case: bridge controller itself */
192 }
193
194 /* Select bus */
195 cfg = REGLOAD(priv->regs->cfg_stat);
196 REGSTORE(priv->regs->cfg_stat, (cfg & ~(0xf << 23)) | (bus << 23));
197
198 pci_conf = (unsigned int *) (priv->pci_conf |
199 (devfn << 8) | (where & 0xfc));
200 LEON3_BYPASS_STORE_PA(pci_conf, swab32(val));
201
202 return 0;
203 }
204
205 static int grpci1_cfg_w16(struct grpci1_priv *priv, unsigned int bus,
206 unsigned int devfn, int where, u32 val)
207 {
208 int ret;
209 u32 v;
210
211 if (where & 0x1)
212 return -EINVAL;
213 ret = grpci1_cfg_r32(priv, bus, devfn, where&~3, &v);
214 if (ret)
215 return ret;
216 v = (v & ~(0xffff << (8 * (where & 0x3)))) |
217 ((0xffff & val) << (8 * (where & 0x3)));
218 return grpci1_cfg_w32(priv, bus, devfn, where & ~0x3, v);
219 }
220
221 static int grpci1_cfg_w8(struct grpci1_priv *priv, unsigned int bus,
222 unsigned int devfn, int where, u32 val)
223 {
224 int ret;
225 u32 v;
226
227 ret = grpci1_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
228 if (ret != 0)
229 return ret;
230 v = (v & ~(0xff << (8 * (where & 0x3)))) |
231 ((0xff & val) << (8 * (where & 0x3)));
232 return grpci1_cfg_w32(priv, bus, devfn, where & ~0x3, v);
233 }
234
235 /* Read from Configuration Space. When entering here the PCI layer has taken
236 * the pci_lock spinlock and IRQ is off.
237 */
238 static int grpci1_read_config(struct pci_bus *bus, unsigned int devfn,
239 int where, int size, u32 *val)
240 {
241 struct grpci1_priv *priv = grpci1priv;
242 unsigned int busno = bus->number;
243 int ret;
244
245 if (PCI_SLOT(devfn) > 15 || busno > 15) {
246 *val = ~0;
247 return 0;
248 }
249
250 switch (size) {
251 case 1:
252 ret = grpci1_cfg_r8(priv, busno, devfn, where, val);
253 break;
254 case 2:
255 ret = grpci1_cfg_r16(priv, busno, devfn, where, val);
256 break;
257 case 4:
258 ret = grpci1_cfg_r32(priv, busno, devfn, where, val);
259 break;
260 default:
261 ret = -EINVAL;
262 break;
263 }
264
265 #ifdef GRPCI1_DEBUG_CFGACCESS
266 printk(KERN_INFO
267 "grpci1_read_config: [%02x:%02x:%x] ofs=%d val=%x size=%d\n",
268 busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where, *val, size);
269 #endif
270
271 return ret;
272 }
273
274 /* Write to Configuration Space. When entering here the PCI layer has taken
275 * the pci_lock spinlock and IRQ is off.
276 */
277 static int grpci1_write_config(struct pci_bus *bus, unsigned int devfn,
278 int where, int size, u32 val)
279 {
280 struct grpci1_priv *priv = grpci1priv;
281 unsigned int busno = bus->number;
282
283 if (PCI_SLOT(devfn) > 15 || busno > 15)
284 return 0;
285
286 #ifdef GRPCI1_DEBUG_CFGACCESS
287 printk(KERN_INFO
288 "grpci1_write_config: [%02x:%02x:%x] ofs=%d size=%d val=%x\n",
289 busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val);
290 #endif
291
292 switch (size) {
293 default:
294 return -EINVAL;
295 case 1:
296 return grpci1_cfg_w8(priv, busno, devfn, where, val);
297 case 2:
298 return grpci1_cfg_w16(priv, busno, devfn, where, val);
299 case 4:
300 return grpci1_cfg_w32(priv, busno, devfn, where, val);
301 }
302 }
303
304 static struct pci_ops grpci1_ops = {
305 .read = grpci1_read_config,
306 .write = grpci1_write_config,
307 };
308
309 /* GENIRQ IRQ chip implementation for grpci1 irqmode=0..2. In configuration
310 * 3 where all PCI Interrupts has a separate IRQ on the system IRQ controller
311 * this is not needed and the standard IRQ controller can be used.
312 */
313
314 static void grpci1_mask_irq(struct irq_data *data)
315 {
316 u32 irqidx;
317 struct grpci1_priv *priv = grpci1priv;
318
319 irqidx = (u32)data->chip_data - 1;
320 if (irqidx > 3) /* only mask PCI interrupts here */
321 return;
322 irqidx += IRQ_MASK_BIT;
323
324 REGSTORE(priv->regs->irq, REGLOAD(priv->regs->irq) & ~(1 << irqidx));
325 }
326
327 static void grpci1_unmask_irq(struct irq_data *data)
328 {
329 u32 irqidx;
330 struct grpci1_priv *priv = grpci1priv;
331
332 irqidx = (u32)data->chip_data - 1;
333 if (irqidx > 3) /* only unmask PCI interrupts here */
334 return;
335 irqidx += IRQ_MASK_BIT;
336
337 REGSTORE(priv->regs->irq, REGLOAD(priv->regs->irq) | (1 << irqidx));
338 }
339
340 static unsigned int grpci1_startup_irq(struct irq_data *data)
341 {
342 grpci1_unmask_irq(data);
343 return 0;
344 }
345
346 static void grpci1_shutdown_irq(struct irq_data *data)
347 {
348 grpci1_mask_irq(data);
349 }
350
351 static struct irq_chip grpci1_irq = {
352 .name = "grpci1",
353 .irq_startup = grpci1_startup_irq,
354 .irq_shutdown = grpci1_shutdown_irq,
355 .irq_mask = grpci1_mask_irq,
356 .irq_unmask = grpci1_unmask_irq,
357 };
358
359 /* Handle one or multiple IRQs from the PCI core */
360 static void grpci1_pci_flow_irq(struct irq_desc *desc)
361 {
362 struct grpci1_priv *priv = grpci1priv;
363 int i, ack = 0;
364 unsigned int irqreg;
365
366 irqreg = REGLOAD(priv->regs->irq);
367 irqreg = (irqreg >> IRQ_MASK_BIT) & irqreg;
368
369 /* Error Interrupt? */
370 if (irqreg & IRQ_ALL_ERRORS) {
371 generic_handle_irq(priv->irq_err);
372 ack = 1;
373 }
374
375 /* PCI Interrupt? */
376 if (irqreg & IRQ_INTX) {
377 /* Call respective PCI Interrupt handler */
378 for (i = 0; i < 4; i++) {
379 if (irqreg & (1 << i))
380 generic_handle_irq(priv->irq_map[i]);
381 }
382 ack = 1;
383 }
384
385 /*
386 * Call "first level" IRQ chip end-of-irq handler. It will ACK LEON IRQ
387 * Controller, this must be done after IRQ sources have been handled to
388 * avoid double IRQ generation
389 */
390 if (ack)
391 desc->irq_data.chip->irq_eoi(&desc->irq_data);
392 }
393
394 /* Create a virtual IRQ */
395 static unsigned int grpci1_build_device_irq(unsigned int irq)
396 {
397 unsigned int virq = 0, pil;
398
399 pil = 1 << 8;
400 virq = irq_alloc(irq, pil);
401 if (virq == 0)
402 goto out;
403
404 irq_set_chip_and_handler_name(virq, &grpci1_irq, handle_simple_irq,
405 "pcilvl");
406 irq_set_chip_data(virq, (void *)irq);
407
408 out:
409 return virq;
410 }
411
412 /*
413 * Initialize mappings AMBA<->PCI, clear IRQ state, setup PCI interface
414 *
415 * Target BARs:
416 * BAR0: unused in this implementation
417 * BAR1: peripheral DMA to host's memory (size at least 256MByte)
418 * BAR2..BAR5: not implemented in hardware
419 */
420 static void grpci1_hw_init(struct grpci1_priv *priv)
421 {
422 u32 ahbadr, bar_sz, data, pciadr;
423 struct grpci1_regs __iomem *regs = priv->regs;
424
425 /* set 1:1 mapping between AHB -> PCI memory space */
426 REGSTORE(regs->cfg_stat, priv->pci_area & 0xf0000000);
427
428 /* map PCI accesses to target BAR1 to Linux kernel memory 1:1 */
429 ahbadr = 0xf0000000 & (u32)__pa(PAGE_ALIGN((unsigned long) &_end));
430 REGSTORE(regs->page1, ahbadr);
431
432 /* translate I/O accesses to 0, I/O Space always @ PCI low 64Kbytes */
433 REGSTORE(regs->iomap, REGLOAD(regs->iomap) & 0x0000ffff);
434
435 /* disable and clear pending interrupts */
436 REGSTORE(regs->irq, 0);
437
438 /* Setup BAR0 outside access range so that it does not conflict with
439 * peripheral DMA. There is no need to set up the PAGE0 register.
440 */
441 grpci1_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0, 0xffffffff);
442 grpci1_cfg_r32(priv, TGT, 0, PCI_BASE_ADDRESS_0, &bar_sz);
443 bar_sz = ~bar_sz + 1;
444 pciadr = priv->pci_area - bar_sz;
445 grpci1_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0, pciadr);
446
447 /*
448 * Setup the Host's PCI Target BAR1 for other peripherals to access,
449 * and do DMA to the host's memory.
450 */
451 grpci1_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_1, ahbadr);
452
453 /*
454 * Setup Latency Timer and cache line size. Default cache line
455 * size will result in poor performance (256 word fetches), 0xff
456 * will set it according to the max size of the PCI FIFO.
457 */
458 grpci1_cfg_w8(priv, TGT, 0, PCI_CACHE_LINE_SIZE, 0xff);
459 grpci1_cfg_w8(priv, TGT, 0, PCI_LATENCY_TIMER, 0x40);
460
461 /* set as bus master, enable pci memory responses, clear status bits */
462 grpci1_cfg_r32(priv, TGT, 0, PCI_COMMAND, &data);
463 data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
464 grpci1_cfg_w32(priv, TGT, 0, PCI_COMMAND, data);
465 }
466
467 static irqreturn_t grpci1_jump_interrupt(int irq, void *arg)
468 {
469 struct grpci1_priv *priv = arg;
470 dev_err(priv->dev, "Jump IRQ happened\n");
471 return IRQ_NONE;
472 }
473
474 /* Handle GRPCI1 Error Interrupt */
475 static irqreturn_t grpci1_err_interrupt(int irq, void *arg)
476 {
477 struct grpci1_priv *priv = arg;
478 u32 status;
479
480 grpci1_cfg_r16(priv, TGT, 0, PCI_STATUS, &status);
481 status &= priv->pci_err_mask;
482
483 if (status == 0)
484 return IRQ_NONE;
485
486 if (status & PCI_STATUS_PARITY)
487 dev_err(priv->dev, "Data Parity Error\n");
488
489 if (status & PCI_STATUS_SIG_TARGET_ABORT)
490 dev_err(priv->dev, "Signalled Target Abort\n");
491
492 if (status & PCI_STATUS_REC_TARGET_ABORT)
493 dev_err(priv->dev, "Received Target Abort\n");
494
495 if (status & PCI_STATUS_REC_MASTER_ABORT)
496 dev_err(priv->dev, "Received Master Abort\n");
497
498 if (status & PCI_STATUS_SIG_SYSTEM_ERROR)
499 dev_err(priv->dev, "Signalled System Error\n");
500
501 if (status & PCI_STATUS_DETECTED_PARITY)
502 dev_err(priv->dev, "Parity Error\n");
503
504 /* Clear handled INT TYPE IRQs */
505 grpci1_cfg_w16(priv, TGT, 0, PCI_STATUS, status);
506
507 return IRQ_HANDLED;
508 }
509
510 static int grpci1_of_probe(struct platform_device *ofdev)
511 {
512 struct grpci1_regs __iomem *regs;
513 struct grpci1_priv *priv;
514 int err, len;
515 const int *tmp;
516 u32 cfg, size, err_mask;
517 struct resource *res;
518
519 if (grpci1priv) {
520 dev_err(&ofdev->dev, "only one GRPCI1 supported\n");
521 return -ENODEV;
522 }
523
524 if (ofdev->num_resources < 3) {
525 dev_err(&ofdev->dev, "not enough APB/AHB resources\n");
526 return -EIO;
527 }
528
529 priv = devm_kzalloc(&ofdev->dev, sizeof(*priv), GFP_KERNEL);
530 if (!priv) {
531 dev_err(&ofdev->dev, "memory allocation failed\n");
532 return -ENOMEM;
533 }
534 platform_set_drvdata(ofdev, priv);
535 priv->dev = &ofdev->dev;
536
537 /* find device register base address */
538 res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
539 regs = devm_ioremap_resource(&ofdev->dev, res);
540 if (IS_ERR(regs))
541 return PTR_ERR(regs);
542
543 /*
544 * check that we're in Host Slot and that we can act as a Host Bridge
545 * and not only as target/peripheral.
546 */
547 cfg = REGLOAD(regs->cfg_stat);
548 if ((cfg & CFGSTAT_HOST) == 0) {
549 dev_err(&ofdev->dev, "not in host system slot\n");
550 return -EIO;
551 }
552
553 /* check that BAR1 support 256 MByte so that we can map kernel space */
554 REGSTORE(regs->page1, 0xffffffff);
555 size = ~REGLOAD(regs->page1) + 1;
556 if (size < 0x10000000) {
557 dev_err(&ofdev->dev, "BAR1 must be at least 256MByte\n");
558 return -EIO;
559 }
560
561 /* hardware must support little-endian PCI (byte-twisting) */
562 if ((REGLOAD(regs->page0) & PAGE0_BTEN) == 0) {
563 dev_err(&ofdev->dev, "byte-twisting is required\n");
564 return -EIO;
565 }
566
567 priv->regs = regs;
568 priv->irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
569 dev_info(&ofdev->dev, "host found at 0x%p, irq%d\n", regs, priv->irq);
570
571 /* Find PCI Memory, I/O and Configuration Space Windows */
572 priv->pci_area = ofdev->resource[1].start;
573 priv->pci_area_end = ofdev->resource[1].end+1;
574 priv->pci_io = ofdev->resource[2].start;
575 priv->pci_conf = ofdev->resource[2].start + 0x10000;
576 priv->pci_conf_end = priv->pci_conf + 0x10000;
577 priv->pci_io_va = (unsigned long)ioremap(priv->pci_io, 0x10000);
578 if (!priv->pci_io_va) {
579 dev_err(&ofdev->dev, "unable to map PCI I/O area\n");
580 return -EIO;
581 }
582
583 printk(KERN_INFO
584 "GRPCI1: MEMORY SPACE [0x%08lx - 0x%08lx]\n"
585 " I/O SPACE [0x%08lx - 0x%08lx]\n"
586 " CONFIG SPACE [0x%08lx - 0x%08lx]\n",
587 priv->pci_area, priv->pci_area_end-1,
588 priv->pci_io, priv->pci_conf-1,
589 priv->pci_conf, priv->pci_conf_end-1);
590
591 /*
592 * I/O Space resources in I/O Window mapped into Virtual Adr Space
593 * We never use low 4KB because some devices seem have problems using
594 * address 0.
595 */
596 priv->info.io_space.name = "GRPCI1 PCI I/O Space";
597 priv->info.io_space.start = priv->pci_io_va + 0x1000;
598 priv->info.io_space.end = priv->pci_io_va + 0x10000 - 1;
599 priv->info.io_space.flags = IORESOURCE_IO;
600
601 /*
602 * grpci1 has no prefetchable memory, map everything as
603 * non-prefetchable memory
604 */
605 priv->info.mem_space.name = "GRPCI1 PCI MEM Space";
606 priv->info.mem_space.start = priv->pci_area;
607 priv->info.mem_space.end = priv->pci_area_end - 1;
608 priv->info.mem_space.flags = IORESOURCE_MEM;
609
610 if (request_resource(&iomem_resource, &priv->info.mem_space) < 0) {
611 dev_err(&ofdev->dev, "unable to request PCI memory area\n");
612 err = -ENOMEM;
613 goto err1;
614 }
615
616 if (request_resource(&ioport_resource, &priv->info.io_space) < 0) {
617 dev_err(&ofdev->dev, "unable to request PCI I/O area\n");
618 err = -ENOMEM;
619 goto err2;
620 }
621
622 /* setup maximum supported PCI buses */
623 priv->info.busn.name = "GRPCI1 busn";
624 priv->info.busn.start = 0;
625 priv->info.busn.end = 15;
626
627 grpci1priv = priv;
628
629 /* Initialize hardware */
630 grpci1_hw_init(priv);
631
632 /*
633 * Get PCI Interrupt to System IRQ mapping and setup IRQ handling
634 * Error IRQ. All PCI and PCI-Error interrupts are shared using the
635 * same system IRQ.
636 */
637 leon_update_virq_handling(priv->irq, grpci1_pci_flow_irq, "pcilvl", 0);
638
639 priv->irq_map[0] = grpci1_build_device_irq(1);
640 priv->irq_map[1] = grpci1_build_device_irq(2);
641 priv->irq_map[2] = grpci1_build_device_irq(3);
642 priv->irq_map[3] = grpci1_build_device_irq(4);
643 priv->irq_err = grpci1_build_device_irq(5);
644
645 printk(KERN_INFO " PCI INTA..D#: IRQ%d, IRQ%d, IRQ%d, IRQ%d\n",
646 priv->irq_map[0], priv->irq_map[1], priv->irq_map[2],
647 priv->irq_map[3]);
648
649 /* Enable IRQs on LEON IRQ controller */
650 err = devm_request_irq(&ofdev->dev, priv->irq, grpci1_jump_interrupt, 0,
651 "GRPCI1_JUMP", priv);
652 if (err) {
653 dev_err(&ofdev->dev, "ERR IRQ request failed: %d\n", err);
654 goto err3;
655 }
656
657 /* Setup IRQ handler for access errors */
658 err = devm_request_irq(&ofdev->dev, priv->irq_err,
659 grpci1_err_interrupt, IRQF_SHARED, "GRPCI1_ERR",
660 priv);
661 if (err) {
662 dev_err(&ofdev->dev, "ERR VIRQ request failed: %d\n", err);
663 goto err3;
664 }
665
666 tmp = of_get_property(ofdev->dev.of_node, "all_pci_errors", &len);
667 if (tmp && (len == 4)) {
668 priv->pci_err_mask = ALL_PCI_ERRORS;
669 err_mask = IRQ_ALL_ERRORS << IRQ_MASK_BIT;
670 } else {
671 priv->pci_err_mask = DEF_PCI_ERRORS;
672 err_mask = IRQ_DEF_ERRORS << IRQ_MASK_BIT;
673 }
674
675 /*
676 * Enable Error Interrupts. PCI interrupts are unmasked once request_irq
677 * is called by the PCI Device drivers
678 */
679 REGSTORE(regs->irq, err_mask);
680
681 /* Init common layer and scan buses */
682 priv->info.ops = &grpci1_ops;
683 priv->info.map_irq = grpci1_map_irq;
684 leon_pci_init(ofdev, &priv->info);
685
686 return 0;
687
688 err3:
689 release_resource(&priv->info.io_space);
690 err2:
691 release_resource(&priv->info.mem_space);
692 err1:
693 iounmap((void __iomem *)priv->pci_io_va);
694 grpci1priv = NULL;
695 return err;
696 }
697
698 static struct of_device_id grpci1_of_match[] = {
699 {
700 .name = "GAISLER_PCIFBRG",
701 },
702 {
703 .name = "01_014",
704 },
705 {},
706 };
707
708 static struct platform_driver grpci1_of_driver = {
709 .driver = {
710 .name = "grpci1",
711 .of_match_table = grpci1_of_match,
712 },
713 .probe = grpci1_of_probe,
714 };
715
716 static int __init grpci1_init(void)
717 {
718 return platform_driver_register(&grpci1_of_driver);
719 }
720
721 subsys_initcall(grpci1_init);
Linux with added FPC-III support