1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright 2010 Broadcom
4 * Copyright 2012 Simon Arlott, Chris Boot, Stephen Warren
6 * Quirk 1: Shortcut interrupts don't set the bank 1/2 register pending bits
8 * If an interrupt fires on bank 1 that isn't in the shortcuts list, bit 8
9 * on bank 0 is set to signify that an interrupt in bank 1 has fired, and
10 * to look in the bank 1 status register for more information.
12 * If an interrupt fires on bank 1 that _is_ in the shortcuts list, its
13 * shortcut bit in bank 0 is set as well as its interrupt bit in the bank 1
14 * status register, but bank 0 bit 8 is _not_ set.
16 * Quirk 2: You can't mask the register 1/2 pending interrupts
18 * In a proper cascaded interrupt controller, the interrupt lines with
19 * cascaded interrupt controllers on them are just normal interrupt lines.
20 * You can mask the interrupts and get on with things. With this controller
23 * Quirk 3: The shortcut interrupts can't be (un)masked in bank 0
25 * Those interrupts that have shortcuts can only be masked/unmasked in
26 * their respective banks' enable/disable registers. Doing so in the bank 0
27 * enable/disable registers has no effect.
29 * The FIQ control register:
30 * Bits 0-6: IRQ (index in order of interrupts from banks 1, 2, then 0)
31 * Bit 7: Enable FIQ generation
34 * An interrupt must be disabled before configuring it for FIQ generation
35 * otherwise both handlers will fire at the same time!
39 #include <linux/slab.h>
40 #include <linux/of_address.h>
41 #include <linux/of_irq.h>
42 #include <linux/irqchip.h>
43 #include <linux/irqdomain.h>
45 #include <asm/exception.h>
47 /* Put the bank and irq (32 bits) into the hwirq */
48 #define MAKE_HWIRQ(b, n) ((b << 5) | (n))
49 #define HWIRQ_BANK(i) (i >> 5)
50 #define HWIRQ_BIT(i) BIT(i & 0x1f)
52 #define NR_IRQS_BANK0 8
53 #define BANK0_HWIRQ_MASK 0xff
54 /* Shortcuts can't be disabled so any unknown new ones need to be masked */
55 #define SHORTCUT1_MASK 0x00007c00
56 #define SHORTCUT2_MASK 0x001f8000
57 #define SHORTCUT_SHIFT 10
58 #define BANK1_HWIRQ BIT(8)
59 #define BANK2_HWIRQ BIT(9)
60 #define BANK0_VALID_MASK (BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \
61 | SHORTCUT1_MASK | SHORTCUT2_MASK)
63 #define REG_FIQ_CONTROL 0x0c
66 #define IRQS_PER_BANK 32
68 static const int reg_pending
[] __initconst
= { 0x00, 0x04, 0x08 };
69 static const int reg_enable
[] __initconst
= { 0x18, 0x10, 0x14 };
70 static const int reg_disable
[] __initconst
= { 0x24, 0x1c, 0x20 };
71 static const int bank_irqs
[] __initconst
= { 8, 32, 32 };
73 static const int shortcuts
[] = {
74 7, 9, 10, 18, 19, /* Bank 1 */
75 21, 22, 23, 24, 25, 30 /* Bank 2 */
80 void __iomem
*pending
[NR_BANKS
];
81 void __iomem
*enable
[NR_BANKS
];
82 void __iomem
*disable
[NR_BANKS
];
83 struct irq_domain
*domain
;
86 static struct armctrl_ic intc __read_mostly
;
87 static void __exception_irq_entry
bcm2835_handle_irq(
88 struct pt_regs
*regs
);
89 static void bcm2836_chained_handle_irq(struct irq_desc
*desc
);
91 static void armctrl_mask_irq(struct irq_data
*d
)
93 writel_relaxed(HWIRQ_BIT(d
->hwirq
), intc
.disable
[HWIRQ_BANK(d
->hwirq
)]);
96 static void armctrl_unmask_irq(struct irq_data
*d
)
98 writel_relaxed(HWIRQ_BIT(d
->hwirq
), intc
.enable
[HWIRQ_BANK(d
->hwirq
)]);
101 static struct irq_chip armctrl_chip
= {
102 .name
= "ARMCTRL-level",
103 .irq_mask
= armctrl_mask_irq
,
104 .irq_unmask
= armctrl_unmask_irq
107 static int armctrl_xlate(struct irq_domain
*d
, struct device_node
*ctrlr
,
108 const u32
*intspec
, unsigned int intsize
,
109 unsigned long *out_hwirq
, unsigned int *out_type
)
111 if (WARN_ON(intsize
!= 2))
114 if (WARN_ON(intspec
[0] >= NR_BANKS
))
117 if (WARN_ON(intspec
[1] >= IRQS_PER_BANK
))
120 if (WARN_ON(intspec
[0] == 0 && intspec
[1] >= NR_IRQS_BANK0
))
123 *out_hwirq
= MAKE_HWIRQ(intspec
[0], intspec
[1]);
124 *out_type
= IRQ_TYPE_NONE
;
128 static const struct irq_domain_ops armctrl_ops
= {
129 .xlate
= armctrl_xlate
132 static int __init
armctrl_of_init(struct device_node
*node
,
133 struct device_node
*parent
,
139 base
= of_iomap(node
, 0);
141 panic("%pOF: unable to map IC registers\n", node
);
143 intc
.domain
= irq_domain_add_linear(node
, MAKE_HWIRQ(NR_BANKS
, 0),
146 panic("%pOF: unable to create IRQ domain\n", node
);
148 for (b
= 0; b
< NR_BANKS
; b
++) {
149 intc
.pending
[b
] = base
+ reg_pending
[b
];
150 intc
.enable
[b
] = base
+ reg_enable
[b
];
151 intc
.disable
[b
] = base
+ reg_disable
[b
];
153 for (i
= 0; i
< bank_irqs
[b
]; i
++) {
154 irq
= irq_create_mapping(intc
.domain
, MAKE_HWIRQ(b
, i
));
156 irq_set_chip_and_handler(irq
, &armctrl_chip
,
163 int parent_irq
= irq_of_parse_and_map(node
, 0);
166 panic("%pOF: unable to get parent interrupt.\n",
169 irq_set_chained_handler(parent_irq
, bcm2836_chained_handle_irq
);
171 set_handle_irq(bcm2835_handle_irq
);
177 static int __init
bcm2835_armctrl_of_init(struct device_node
*node
,
178 struct device_node
*parent
)
180 return armctrl_of_init(node
, parent
, false);
183 static int __init
bcm2836_armctrl_of_init(struct device_node
*node
,
184 struct device_node
*parent
)
186 return armctrl_of_init(node
, parent
, true);
191 * Handle each interrupt across the entire interrupt controller. This reads the
192 * status register before handling each interrupt, which is necessary given that
193 * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
196 static u32
armctrl_translate_bank(int bank
)
198 u32 stat
= readl_relaxed(intc
.pending
[bank
]);
200 return MAKE_HWIRQ(bank
, ffs(stat
) - 1);
203 static u32
armctrl_translate_shortcut(int bank
, u32 stat
)
205 return MAKE_HWIRQ(bank
, shortcuts
[ffs(stat
>> SHORTCUT_SHIFT
) - 1]);
208 static u32
get_next_armctrl_hwirq(void)
210 u32 stat
= readl_relaxed(intc
.pending
[0]) & BANK0_VALID_MASK
;
214 else if (stat
& BANK0_HWIRQ_MASK
)
215 return MAKE_HWIRQ(0, ffs(stat
& BANK0_HWIRQ_MASK
) - 1);
216 else if (stat
& SHORTCUT1_MASK
)
217 return armctrl_translate_shortcut(1, stat
& SHORTCUT1_MASK
);
218 else if (stat
& SHORTCUT2_MASK
)
219 return armctrl_translate_shortcut(2, stat
& SHORTCUT2_MASK
);
220 else if (stat
& BANK1_HWIRQ
)
221 return armctrl_translate_bank(1);
222 else if (stat
& BANK2_HWIRQ
)
223 return armctrl_translate_bank(2);
228 static void __exception_irq_entry
bcm2835_handle_irq(
229 struct pt_regs
*regs
)
233 while ((hwirq
= get_next_armctrl_hwirq()) != ~0)
234 handle_domain_irq(intc
.domain
, hwirq
, regs
);
237 static void bcm2836_chained_handle_irq(struct irq_desc
*desc
)
241 while ((hwirq
= get_next_armctrl_hwirq()) != ~0)
242 generic_handle_irq(irq_linear_revmap(intc
.domain
, hwirq
));
245 IRQCHIP_DECLARE(bcm2835_armctrl_ic
, "brcm,bcm2835-armctrl-ic",
246 bcm2835_armctrl_of_init
);
247 IRQCHIP_DECLARE(bcm2836_armctrl_ic
, "brcm,bcm2836-armctrl-ic",
248 bcm2836_armctrl_of_init
);