include/asm-m68knommu/mcfwdebug.h

   1 /****************************************************************************/
   2
   3 /*
   4  *      mcfdebug.h -- ColdFire Debug Module support.
   5  *
   6  *      (C) Copyright 2001, Lineo Inc. (www.lineo.com)
   7  */
   8
   9 /****************************************************************************/
  10 #ifndef mcfdebug_h
  11 #define mcfdebug_h
  12 /****************************************************************************/
  13 #include <linux/config.h>
  14
  15 /* Define the debug module registers */
  16 #define MCFDEBUG_CSR    0x0                     /* Configuration status         */
  17 #define MCFDEBUG_BAAR   0x5                     /* BDM address attribute        */
  18 #define MCFDEBUG_AATR   0x6                     /* Address attribute trigger    */
  19 #define MCFDEBUG_TDR    0x7                     /* Trigger definition           */
  20 #define MCFDEBUG_PBR    0x8                     /* PC breakpoint                */
  21 #define MCFDEBUG_PBMR   0x9                     /* PC breakpoint mask           */
  22 #define MCFDEBUG_ABHR   0xc                     /* High address breakpoint      */
  23 #define MCFDEBUG_ABLR   0xd                     /* Low address breakpoint       */
  24 #define MCFDEBUG_DBR    0xe                     /* Data breakpoint              */
  25 #define MCFDEBUG_DBMR   0xf                     /* Data breakpoint mask         */
  26
  27 /* Define some handy constants for the trigger definition register */
  28 #define MCFDEBUG_TDR_TRC_DISP   0x00000000      /* display on DDATA only        */
  29 #define MCFDEBUG_TDR_TRC_HALT   0x40000000      /* Processor halt on BP         */
  30 #define MCFDEBUG_TDR_TRC_INTR   0x80000000      /* Debug intr on BP             */
  31 #define MCFDEBUG_TDR_LXT1       0x00004000      /* TDR level 1                  */
  32 #define MCFDEBUG_TDR_LXT2       0x00008000      /* TDR level 2                  */
  33 #define MCFDEBUG_TDR_EBL1       0x00002000      /* Enable breakpoint level 1    */
  34 #define MCFDEBUG_TDR_EBL2       0x20000000      /* Enable breakpoint level 2    */
  35 #define MCFDEBUG_TDR_EDLW1      0x00001000      /* Enable data BP longword      */
  36 #define MCFDEBUG_TDR_EDLW2      0x10000000
  37 #define MCFDEBUG_TDR_EDWL1      0x00000800      /* Enable data BP lower word    */
  38 #define MCFDEBUG_TDR_EDWL2      0x08000000
  39 #define MCFDEBUG_TDR_EDWU1      0x00000400      /* Enable data BP upper word    */
  40 #define MCFDEBUG_TDR_EDWU2      0x04000000
  41 #define MCFDEBUG_TDR_EDLL1      0x00000200      /* Enable data BP low low byte  */
  42 #define MCFDEBUG_TDR_EDLL2      0x02000000
  43 #define MCFDEBUG_TDR_EDLM1      0x00000100      /* Enable data BP low mid byte  */
  44 #define MCFDEBUG_TDR_EDLM2      0x01000000
  45 #define MCFDEBUG_TDR_EDUM1      0x00000080      /* Enable data BP up mid byte   */
  46 #define MCFDEBUG_TDR_EDUM2      0x00800000
  47 #define MCFDEBUG_TDR_EDUU1      0x00000040      /* Enable data BP up up byte    */
  48 #define MCFDEBUG_TDR_EDUU2      0x00400000
  49 #define MCFDEBUG_TDR_DI1        0x00000020      /* Data BP invert               */
  50 #define MCFDEBUG_TDR_DI2        0x00200000
  51 #define MCFDEBUG_TDR_EAI1       0x00000010      /* Enable address BP inverted   */
  52 #define MCFDEBUG_TDR_EAI2       0x00100000
  53 #define MCFDEBUG_TDR_EAR1       0x00000008      /* Enable address BP range      */
  54 #define MCFDEBUG_TDR_EAR2       0x00080000
  55 #define MCFDEBUG_TDR_EAL1       0x00000004      /* Enable address BP low        */
  56 #define MCFDEBUG_TDR_EAL2       0x00040000
  57 #define MCFDEBUG_TDR_EPC1       0x00000002      /* Enable PC BP                 */
  58 #define MCFDEBUG_TDR_EPC2       0x00020000
  59 #define MCFDEBUG_TDR_PCI1       0x00000001      /* PC BP invert                 */
  60 #define MCFDEBUG_TDR_PCI2       0x00010000
  61
  62 /* Constants for the address attribute trigger register */
  63 #define MCFDEBUG_AAR_RESET      0x00000005
  64 /* Fields not yet implemented */
  65
  66 /* And some definitions for the writable sections of the CSR */
  67 #define MCFDEBUG_CSR_RESET      0x00100000
  68 #define MCFDEBUG_CSR_PSTCLK     0x00020000      /* PSTCLK disable               */
  69 #define MCFDEBUG_CSR_IPW        0x00010000      /* Inhibit processor writes     */
  70 #define MCFDEBUG_CSR_MAP        0x00008000      /* Processor refs in emul mode  */
  71 #define MCFDEBUG_CSR_TRC        0x00004000      /* Emul mode on trace exception */
  72 #define MCFDEBUG_CSR_EMU        0x00002000      /* Force emulation mode         */
  73 #define MCFDEBUG_CSR_DDC_READ   0x00000800      /* Debug data control           */
  74 #define MCFDEBUG_CSR_DDC_WRITE  0x00001000
  75 #define MCFDEBUG_CSR_UHE        0x00000400      /* User mode halt enable        */
  76 #define MCFDEBUG_CSR_BTB0       0x00000000      /* Branch target 0 bytes        */
  77 #define MCFDEBUG_CSR_BTB2       0x00000100      /* Branch target 2 bytes        */
  78 #define MCFDEBUG_CSR_BTB3       0x00000200      /* Branch target 3 bytes        */
  79 #define MCFDEBUG_CSR_BTB4       0x00000300      /* Branch target 4 bytes        */
  80 #define MCFDEBUG_CSR_NPL        0x00000040      /* Non-pipelined mode           */
  81 #define MCFDEBUG_CSR_SSM        0x00000010      /* Single step mode             */
  82
  83 /* Constants for the BDM address attribute register */
  84 #define MCFDEBUG_BAAR_RESET     0x00000005
  85 /* Fields not yet implemented */
  86
  87
  88 /* This routine wrappers up the wdebug asm instruction so that the register
  89  * and value can be relatively easily specified.  The biggest hassle here is
  90  * that the debug module instructions (2 longs) must be long word aligned and
  91  * some pointer fiddling is performed to ensure this.
  92  */
  93 extern inline void wdebug(int reg, unsigned long data) {
  94         unsigned short dbg_spc[6];
  95         unsigned short *dbg;
  96
  97         // Force alignment to long word boundary
  98         dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc);
  99
 100         // Build up the debug instruction
 101         dbg[0] = 0x2c80 | (reg & 0xf);
 102         dbg[1] = (data >> 16) & 0xffff;
 103         dbg[2] = data & 0xffff;
 104         dbg[3] = 0;
 105
 106         // Perform the wdebug instruction
 107 #if 0
 108         // This strain is for gas which doesn't have the wdebug instructions defined
 109         asm(    "move.l %0, %%a0\n\t"
 110                 ".word  0xfbd0\n\t"
 111                 ".word  0x0003\n\t"
 112             :: "g" (dbg) : "a0");
 113 #else
 114         // And this is for when it does
 115         asm(    "wdebug (%0)" :: "a" (dbg));
 116 #endif
 117 }
 118
 119 #endif