arch/ia64/include/asm/sn/ioc3.h

   1 /*
   2  * Copyright (C) 2005 Silicon Graphics, Inc.
   3  */
   4 #ifndef IA64_SN_IOC3_H
   5 #define IA64_SN_IOC3_H
   6
   7 /* serial port register map */
   8 struct ioc3_serialregs {
   9         uint32_t sscr;
  10         uint32_t stpir;
  11         uint32_t stcir;
  12         uint32_t srpir;
  13         uint32_t srcir;
  14         uint32_t srtr;
  15         uint32_t shadow;
  16 };
  17
  18 /* SUPERIO uart register map */
  19 struct ioc3_uartregs {
  20         char iu_lcr;
  21         union {
  22                 char iir;       /* read only */
  23                 char fcr;       /* write only */
  24         } u3;
  25         union {
  26                 char ier;       /* DLAB == 0 */
  27                 char dlm;       /* DLAB == 1 */
  28         } u2;
  29         union {
  30                 char rbr;       /* read only, DLAB == 0 */
  31                 char thr;       /* write only, DLAB == 0 */
  32                 char dll;       /* DLAB == 1 */
  33         } u1;
  34         char iu_scr;
  35         char iu_msr;
  36         char iu_lsr;
  37         char iu_mcr;
  38 };
  39
  40 #define iu_rbr u1.rbr
  41 #define iu_thr u1.thr
  42 #define iu_dll u1.dll
  43 #define iu_ier u2.ier
  44 #define iu_dlm u2.dlm
  45 #define iu_iir u3.iir
  46 #define iu_fcr u3.fcr
  47
  48 struct ioc3_sioregs {
  49         char fill[0x170];
  50         struct ioc3_uartregs uartb;
  51         struct ioc3_uartregs uarta;
  52 };
  53
  54 /* PCI IO/mem space register map */
  55 struct ioc3 {
  56         uint32_t pci_id;
  57         uint32_t pci_scr;
  58         uint32_t pci_rev;
  59         uint32_t pci_lat;
  60         uint32_t pci_addr;
  61         uint32_t pci_err_addr_l;
  62         uint32_t pci_err_addr_h;
  63
  64         uint32_t sio_ir;
  65         /* these registers are read-only for general kernel code. To
  66          * modify them use the functions in ioc3.c
  67          */
  68         uint32_t sio_ies;
  69         uint32_t sio_iec;
  70         uint32_t sio_cr;
  71         uint32_t int_out;
  72         uint32_t mcr;
  73         uint32_t gpcr_s;
  74         uint32_t gpcr_c;
  75         uint32_t gpdr;
  76         uint32_t gppr[9];
  77         char fill[0x4c];
  78
  79         /* serial port registers */
  80         uint32_t sbbr_h;
  81         uint32_t sbbr_l;
  82
  83         struct ioc3_serialregs port_a;
  84         struct ioc3_serialregs port_b;
  85         char fill1[0x1ff10];
  86         /* superio registers */
  87         struct ioc3_sioregs sregs;
  88 };
  89
  90 /* These don't exist on the ioc3 serial card... */
  91 #define eier    fill1[8]
  92 #define eisr    fill1[4]
  93
  94 #define PCI_LAT                 0xc     /* Latency Timer */
  95 #define PCI_SCR_DROP_MODE_EN    0x00008000 /* drop pios on parity err */
  96 #define UARTA_BASE              0x178
  97 #define UARTB_BASE              0x170
  98
  99
 100 /* bitmasks for serial RX status byte */
 101 #define RXSB_OVERRUN            0x01    /* char(s) lost */
 102 #define RXSB_PAR_ERR            0x02    /* parity error */
 103 #define RXSB_FRAME_ERR          0x04    /* framing error */
 104 #define RXSB_BREAK              0x08    /* break character */
 105 #define RXSB_CTS                0x10    /* state of CTS */
 106 #define RXSB_DCD                0x20    /* state of DCD */
 107 #define RXSB_MODEM_VALID        0x40    /* DCD, CTS and OVERRUN are valid */
 108 #define RXSB_DATA_VALID         0x80    /* FRAME_ERR PAR_ERR & BREAK valid */
 109
 110 /* bitmasks for serial TX control byte */
 111 #define TXCB_INT_WHEN_DONE      0x20    /* interrupt after this byte is sent */
 112 #define TXCB_INVALID            0x00    /* byte is invalid */
 113 #define TXCB_VALID              0x40    /* byte is valid */
 114 #define TXCB_MCR                0x80    /* data<7:0> to modem cntrl register */
 115 #define TXCB_DELAY              0xc0    /* delay data<7:0> mSec */
 116
 117 /* bitmasks for SBBR_L */
 118 #define SBBR_L_SIZE             0x00000001      /* 0 1KB rings, 1 4KB rings */
 119
 120 /* bitmasks for SSCR_<A:B> */
 121 #define SSCR_RX_THRESHOLD       0x000001ff      /* hiwater mark */
 122 #define SSCR_TX_TIMER_BUSY      0x00010000      /* TX timer in progress */
 123 #define SSCR_HFC_EN             0x00020000      /* h/w flow cntrl enabled */
 124 #define SSCR_RX_RING_DCD        0x00040000      /* postRX record on delta-DCD */
 125 #define SSCR_RX_RING_CTS        0x00080000      /* postRX record on delta-CTS */
 126 #define SSCR_HIGH_SPD           0x00100000      /* 4X speed */
 127 #define SSCR_DIAG               0x00200000      /* bypass clock divider */
 128 #define SSCR_RX_DRAIN           0x08000000      /* drain RX buffer to memory */
 129 #define SSCR_DMA_EN             0x10000000      /* enable ring buffer DMA */
 130 #define SSCR_DMA_PAUSE          0x20000000      /* pause DMA */
 131 #define SSCR_PAUSE_STATE        0x40000000      /* set when PAUSE takes effect*/
 132 #define SSCR_RESET              0x80000000      /* reset DMA channels */
 133
 134 /* all producer/comsumer pointers are the same bitfield */
 135 #define PROD_CONS_PTR_4K        0x00000ff8      /* for 4K buffers */
 136 #define PROD_CONS_PTR_1K        0x000003f8      /* for 1K buffers */
 137 #define PROD_CONS_PTR_OFF       3
 138
 139 /* bitmasks for SRCIR_<A:B> */
 140 #define SRCIR_ARM               0x80000000      /* arm RX timer */
 141
 142 /* bitmasks for SHADOW_<A:B> */
 143 #define SHADOW_DR               0x00000001      /* data ready */
 144 #define SHADOW_OE               0x00000002      /* overrun error */
 145 #define SHADOW_PE               0x00000004      /* parity error */
 146 #define SHADOW_FE               0x00000008      /* framing error */
 147 #define SHADOW_BI               0x00000010      /* break interrupt */
 148 #define SHADOW_THRE             0x00000020      /* transmit holding reg empty */
 149 #define SHADOW_TEMT             0x00000040      /* transmit shift reg empty */
 150 #define SHADOW_RFCE             0x00000080      /* char in RX fifo has error */
 151 #define SHADOW_DCTS             0x00010000      /* delta clear to send */
 152 #define SHADOW_DDCD             0x00080000      /* delta data carrier detect */
 153 #define SHADOW_CTS              0x00100000      /* clear to send */
 154 #define SHADOW_DCD              0x00800000      /* data carrier detect */
 155 #define SHADOW_DTR              0x01000000      /* data terminal ready */
 156 #define SHADOW_RTS              0x02000000      /* request to send */
 157 #define SHADOW_OUT1             0x04000000      /* 16550 OUT1 bit */
 158 #define SHADOW_OUT2             0x08000000      /* 16550 OUT2 bit */
 159 #define SHADOW_LOOP             0x10000000      /* loopback enabled */
 160
 161 /* bitmasks for SRTR_<A:B> */
 162 #define SRTR_CNT                0x00000fff      /* reload value for RX timer */
 163 #define SRTR_CNT_VAL            0x0fff0000      /* current value of RX timer */
 164 #define SRTR_CNT_VAL_SHIFT      16
 165 #define SRTR_HZ                 16000           /* SRTR clock frequency */
 166
 167 /* bitmasks for SIO_IR, SIO_IEC and SIO_IES  */
 168 #define SIO_IR_SA_TX_MT         0x00000001      /* Serial port A TX empty */
 169 #define SIO_IR_SA_RX_FULL       0x00000002      /* port A RX buf full */
 170 #define SIO_IR_SA_RX_HIGH       0x00000004      /* port A RX hiwat */
 171 #define SIO_IR_SA_RX_TIMER      0x00000008      /* port A RX timeout */
 172 #define SIO_IR_SA_DELTA_DCD     0x00000010      /* port A delta DCD */
 173 #define SIO_IR_SA_DELTA_CTS     0x00000020      /* port A delta CTS */
 174 #define SIO_IR_SA_INT           0x00000040      /* port A pass-thru intr */
 175 #define SIO_IR_SA_TX_EXPLICIT   0x00000080      /* port A explicit TX thru */
 176 #define SIO_IR_SA_MEMERR        0x00000100      /* port A PCI error */
 177 #define SIO_IR_SB_TX_MT         0x00000200
 178 #define SIO_IR_SB_RX_FULL       0x00000400
 179 #define SIO_IR_SB_RX_HIGH       0x00000800
 180 #define SIO_IR_SB_RX_TIMER      0x00001000
 181 #define SIO_IR_SB_DELTA_DCD     0x00002000
 182 #define SIO_IR_SB_DELTA_CTS     0x00004000
 183 #define SIO_IR_SB_INT           0x00008000
 184 #define SIO_IR_SB_TX_EXPLICIT   0x00010000
 185 #define SIO_IR_SB_MEMERR        0x00020000
 186 #define SIO_IR_PP_INT           0x00040000      /* P port pass-thru intr */
 187 #define SIO_IR_PP_INTA          0x00080000      /* PP context A thru */
 188 #define SIO_IR_PP_INTB          0x00100000      /* PP context B thru */
 189 #define SIO_IR_PP_MEMERR        0x00200000      /* PP PCI error */
 190 #define SIO_IR_KBD_INT          0x00400000      /* kbd/mouse intr */
 191 #define SIO_IR_RT_INT           0x08000000      /* RT output pulse */
 192 #define SIO_IR_GEN_INT1         0x10000000      /* RT input pulse */
 193 #define SIO_IR_GEN_INT_SHIFT    28
 194
 195 /* per device interrupt masks */
 196 #define SIO_IR_SA               (SIO_IR_SA_TX_MT | \
 197                                  SIO_IR_SA_RX_FULL | \
 198                                  SIO_IR_SA_RX_HIGH | \
 199                                  SIO_IR_SA_RX_TIMER | \
 200                                  SIO_IR_SA_DELTA_DCD | \
 201                                  SIO_IR_SA_DELTA_CTS | \
 202                                  SIO_IR_SA_INT | \
 203                                  SIO_IR_SA_TX_EXPLICIT | \
 204                                  SIO_IR_SA_MEMERR)
 205
 206 #define SIO_IR_SB               (SIO_IR_SB_TX_MT | \
 207                                  SIO_IR_SB_RX_FULL | \
 208                                  SIO_IR_SB_RX_HIGH | \
 209                                  SIO_IR_SB_RX_TIMER | \
 210                                  SIO_IR_SB_DELTA_DCD | \
 211                                  SIO_IR_SB_DELTA_CTS | \
 212                                  SIO_IR_SB_INT | \
 213                                  SIO_IR_SB_TX_EXPLICIT | \
 214                                  SIO_IR_SB_MEMERR)
 215
 216 #define SIO_IR_PP               (SIO_IR_PP_INT | SIO_IR_PP_INTA | \
 217                                  SIO_IR_PP_INTB | SIO_IR_PP_MEMERR)
 218 #define SIO_IR_RT               (SIO_IR_RT_INT | SIO_IR_GEN_INT1)
 219
 220 /* bitmasks for SIO_CR */
 221 #define SIO_CR_CMD_PULSE_SHIFT 15
 222 #define SIO_CR_SER_A_BASE_SHIFT 1
 223 #define SIO_CR_SER_B_BASE_SHIFT 8
 224 #define SIO_CR_ARB_DIAG         0x00380000      /* cur !enet PCI requet (ro) */
 225 #define SIO_CR_ARB_DIAG_TXA     0x00000000
 226 #define SIO_CR_ARB_DIAG_RXA     0x00080000
 227 #define SIO_CR_ARB_DIAG_TXB     0x00100000
 228 #define SIO_CR_ARB_DIAG_RXB     0x00180000
 229 #define SIO_CR_ARB_DIAG_PP      0x00200000
 230 #define SIO_CR_ARB_DIAG_IDLE    0x00400000      /* 0 -> active request (ro) */
 231
 232 /* defs for some of the generic I/O pins */
 233 #define GPCR_PHY_RESET          0x20    /* pin is output to PHY reset */
 234 #define GPCR_UARTB_MODESEL      0x40    /* pin is output to port B mode sel */
 235 #define GPCR_UARTA_MODESEL      0x80    /* pin is output to port A mode sel */
 236
 237 #define GPPR_PHY_RESET_PIN      5       /* GIO pin controlling phy reset */
 238 #define GPPR_UARTB_MODESEL_PIN  6       /* GIO pin cntrling uartb modeselect */
 239 #define GPPR_UARTA_MODESEL_PIN  7       /* GIO pin cntrling uarta modeselect */
 240
 241 #endif /* IA64_SN_IOC3_H */