arch/alpha/kernel/sys_alcor.c

   1 /*
   2  *      linux/arch/alpha/kernel/sys_alcor.c
   3  *
   4  *      Copyright (C) 1995 David A Rusling
   5  *      Copyright (C) 1996 Jay A Estabrook
   6  *      Copyright (C) 1998, 1999 Richard Henderson
   7  *
   8  * Code supporting the ALCOR and XLT (XL-300/366/433).
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/types.h>
  13 #include <linux/mm.h>
  14 #include <linux/sched.h>
  15 #include <linux/pci.h>
  16 #include <linux/init.h>
  17 #include <linux/reboot.h>
  18 #include <linux/bitops.h>
  19
  20 #include <asm/ptrace.h>
  21 #include <asm/system.h>
  22 #include <asm/io.h>
  23 #include <asm/dma.h>
  24 #include <asm/mmu_context.h>
  25 #include <asm/irq.h>
  26 #include <asm/pgtable.h>
  27 #include <asm/core_cia.h>
  28 #include <asm/tlbflush.h>
  29
  30 #include "proto.h"
  31 #include "irq_impl.h"
  32 #include "pci_impl.h"
  33 #include "machvec_impl.h"
  34
  35
  36 /* Note mask bit is true for ENABLED irqs.  */
  37 static unsigned long cached_irq_mask;
  38
  39 static inline void
  40 alcor_update_irq_hw(unsigned long mask)
  41 {
  42         *(vuip)GRU_INT_MASK = mask;
  43         mb();
  44 }
  45
  46 static inline void
  47 alcor_enable_irq(unsigned int irq)
  48 {
  49         alcor_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
  50 }
  51
  52 static void
  53 alcor_disable_irq(unsigned int irq)
  54 {
  55         alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
  56 }
  57
  58 static void
  59 alcor_mask_and_ack_irq(unsigned int irq)
  60 {
  61         alcor_disable_irq(irq);
  62
  63         /* On ALCOR/XLT, need to dismiss interrupt via GRU. */
  64         *(vuip)GRU_INT_CLEAR = 1 << (irq - 16); mb();
  65         *(vuip)GRU_INT_CLEAR = 0; mb();
  66 }
  67
  68 static unsigned int
  69 alcor_startup_irq(unsigned int irq)
  70 {
  71         alcor_enable_irq(irq);
  72         return 0;
  73 }
  74
  75 static void
  76 alcor_isa_mask_and_ack_irq(unsigned int irq)
  77 {
  78         i8259a_mask_and_ack_irq(irq);
  79
  80         /* On ALCOR/XLT, need to dismiss interrupt via GRU. */
  81         *(vuip)GRU_INT_CLEAR = 0x80000000; mb();
  82         *(vuip)GRU_INT_CLEAR = 0; mb();
  83 }
  84
  85 static void
  86 alcor_end_irq(unsigned int irq)
  87 {
  88         if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
  89                 alcor_enable_irq(irq);
  90 }
  91
  92 static struct hw_interrupt_type alcor_irq_type = {
  93         .typename       = "ALCOR",
  94         .startup        = alcor_startup_irq,
  95         .shutdown       = alcor_disable_irq,
  96         .enable         = alcor_enable_irq,
  97         .disable        = alcor_disable_irq,
  98         .ack            = alcor_mask_and_ack_irq,
  99         .end            = alcor_end_irq,
 100 };
 101
 102 static void
 103 alcor_device_interrupt(unsigned long vector)
 104 {
 105         unsigned long pld;
 106         unsigned int i;
 107
 108         /* Read the interrupt summary register of the GRU */
 109         pld = (*(vuip)GRU_INT_REQ) & GRU_INT_REQ_BITS;
 110
 111         /*
 112          * Now for every possible bit set, work through them and call
 113          * the appropriate interrupt handler.
 114          */
 115         while (pld) {
 116                 i = ffz(~pld);
 117                 pld &= pld - 1; /* clear least bit set */
 118                 if (i == 31) {
 119                         isa_device_interrupt(vector);
 120                 } else {
 121                         handle_irq(16 + i);
 122                 }
 123         }
 124 }
 125
 126 static void __init
 127 alcor_init_irq(void)
 128 {
 129         long i;
 130
 131         if (alpha_using_srm)
 132                 alpha_mv.device_interrupt = srm_device_interrupt;
 133
 134         *(vuip)GRU_INT_MASK  = 0; mb();                 /* all disabled */
 135         *(vuip)GRU_INT_EDGE  = 0; mb();                 /* all are level */
 136         *(vuip)GRU_INT_HILO  = 0x80000000U; mb();       /* ISA only HI */
 137         *(vuip)GRU_INT_CLEAR = 0; mb();                 /* all clear */
 138
 139         for (i = 16; i < 48; ++i) {
 140                 /* On Alcor, at least, lines 20..30 are not connected
 141                    and can generate spurious interrupts if we turn them
 142                    on while IRQ probing.  */
 143                 if (i >= 16+20 && i <= 16+30)
 144                         continue;
 145                 irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
 146                 irq_desc[i].chip = &alcor_irq_type;
 147         }
 148         i8259a_irq_type.ack = alcor_isa_mask_and_ack_irq;
 149
 150         init_i8259a_irqs();
 151         common_init_isa_dma();
 152
 153         setup_irq(16+31, &isa_cascade_irqaction);
 154 }
 155
 156
 157 /*
 158  * PCI Fixup configuration.
 159  *
 160  * Summary @ GRU_INT_REQ:
 161  * Bit      Meaning
 162  * 0        Interrupt Line A from slot 2
 163  * 1        Interrupt Line B from slot 2
 164  * 2        Interrupt Line C from slot 2
 165  * 3        Interrupt Line D from slot 2
 166  * 4        Interrupt Line A from slot 1
 167  * 5        Interrupt line B from slot 1
 168  * 6        Interrupt Line C from slot 1
 169  * 7        Interrupt Line D from slot 1
 170  * 8        Interrupt Line A from slot 0
 171  * 9        Interrupt Line B from slot 0
 172  *10        Interrupt Line C from slot 0
 173  *11        Interrupt Line D from slot 0
 174  *12        Interrupt Line A from slot 4
 175  *13        Interrupt Line B from slot 4
 176  *14        Interrupt Line C from slot 4
 177  *15        Interrupt Line D from slot 4
 178  *16        Interrupt Line D from slot 3
 179  *17        Interrupt Line D from slot 3
 180  *18        Interrupt Line D from slot 3
 181  *19        Interrupt Line D from slot 3
 182  *20-30     Reserved
 183  *31        EISA interrupt
 184  *
 185  * The device to slot mapping looks like:
 186  *
 187  * Slot     Device
 188  *  6       built-in TULIP (XLT only)
 189  *  7       PCI on board slot 0
 190  *  8       PCI on board slot 3
 191  *  9       PCI on board slot 4
 192  * 10       PCEB (PCI-EISA bridge)
 193  * 11       PCI on board slot 2
 194  * 12       PCI on board slot 1
 195  *
 196  *
 197  * This two layered interrupt approach means that we allocate IRQ 16 and
 198  * above for PCI interrupts.  The IRQ relates to which bit the interrupt
 199  * comes in on.  This makes interrupt processing much easier.
 200  */
 201
 202 static int __init
 203 alcor_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 204 {
 205         static char irq_tab[7][5] __initdata = {
 206                 /*INT    INTA   INTB   INTC   INTD */
 207                 /* note: IDSEL 17 is XLT only */
 208                 {16+13, 16+13, 16+13, 16+13, 16+13},    /* IdSel 17,  TULIP  */
 209                 { 16+8,  16+8,  16+9, 16+10, 16+11},    /* IdSel 18,  slot 0 */
 210                 {16+16, 16+16, 16+17, 16+18, 16+19},    /* IdSel 19,  slot 3 */
 211                 {16+12, 16+12, 16+13, 16+14, 16+15},    /* IdSel 20,  slot 4 */
 212                 {   -1,    -1,    -1,    -1,    -1},    /* IdSel 21,  PCEB   */
 213                 { 16+0,  16+0,  16+1,  16+2,  16+3},    /* IdSel 22,  slot 2 */
 214                 { 16+4,  16+4,  16+5,  16+6,  16+7},    /* IdSel 23,  slot 1 */
 215         };
 216         const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5;
 217         return COMMON_TABLE_LOOKUP;
 218 }
 219
 220 static void
 221 alcor_kill_arch(int mode)
 222 {
 223         cia_kill_arch(mode);
 224
 225 #ifndef ALPHA_RESTORE_SRM_SETUP
 226         switch(mode) {
 227         case LINUX_REBOOT_CMD_RESTART:
 228                 /* Who said DEC engineer's have no sense of humor? ;-)  */
 229                 if (alpha_using_srm) {
 230                         *(vuip) GRU_RESET = 0x0000dead;
 231                         mb();
 232                 }
 233                 break;
 234         case LINUX_REBOOT_CMD_HALT:
 235                 break;
 236         case LINUX_REBOOT_CMD_POWER_OFF:
 237                 break;
 238         }
 239
 240         halt();
 241 #endif
 242 }
 243
 244 static void __init
 245 alcor_init_pci(void)
 246 {
 247         struct pci_dev *dev;
 248
 249         cia_init_pci();
 250
 251         /*
 252          * Now we can look to see if we are really running on an XLT-type
 253          * motherboard, by looking for a 21040 TULIP in slot 6, which is
 254          * built into XLT and BRET/MAVERICK, but not available on ALCOR.
 255          */
 256         dev = pci_get_device(PCI_VENDOR_ID_DEC,
 257                               PCI_DEVICE_ID_DEC_TULIP,
 258                               NULL);
 259         if (dev && dev->devfn == PCI_DEVFN(6,0)) {
 260                 alpha_mv.sys.cia.gru_int_req_bits = XLT_GRU_INT_REQ_BITS;
 261                 printk(KERN_INFO "%s: Detected AS500 or XLT motherboard.\n",
 262                        __func__);
 263         }
 264         pci_dev_put(dev);
 265 }
 266
 267
 268 /*
 269  * The System Vectors
 270  */
 271
 272 struct alpha_machine_vector alcor_mv __initmv = {
 273         .vector_name            = "Alcor",
 274         DO_EV5_MMU,
 275         DO_DEFAULT_RTC,
 276         DO_CIA_IO,
 277         .machine_check          = cia_machine_check,
 278         .max_isa_dma_address    = ALPHA_ALCOR_MAX_ISA_DMA_ADDRESS,
 279         .min_io_address         = EISA_DEFAULT_IO_BASE,
 280         .min_mem_address        = CIA_DEFAULT_MEM_BASE,
 281
 282         .nr_irqs                = 48,
 283         .device_interrupt       = alcor_device_interrupt,
 284
 285         .init_arch              = cia_init_arch,
 286         .init_irq               = alcor_init_irq,
 287         .init_rtc               = common_init_rtc,
 288         .init_pci               = alcor_init_pci,
 289         .kill_arch              = alcor_kill_arch,
 290         .pci_map_irq            = alcor_map_irq,
 291         .pci_swizzle            = common_swizzle,
 292
 293         .sys = { .cia = {
 294                 .gru_int_req_bits = ALCOR_GRU_INT_REQ_BITS
 295         }}
 296 };
 297 ALIAS_MV(alcor)
 298
 299 struct alpha_machine_vector xlt_mv __initmv = {
 300         .vector_name            = "XLT",
 301         DO_EV5_MMU,
 302         DO_DEFAULT_RTC,
 303         DO_CIA_IO,
 304         .machine_check          = cia_machine_check,
 305         .max_isa_dma_address    = ALPHA_MAX_ISA_DMA_ADDRESS,
 306         .min_io_address         = EISA_DEFAULT_IO_BASE,
 307         .min_mem_address        = CIA_DEFAULT_MEM_BASE,
 308
 309         .nr_irqs                = 48,
 310         .device_interrupt       = alcor_device_interrupt,
 311
 312         .init_arch              = cia_init_arch,
 313         .init_irq               = alcor_init_irq,
 314         .init_rtc               = common_init_rtc,
 315         .init_pci               = alcor_init_pci,
 316         .kill_arch              = alcor_kill_arch,
 317         .pci_map_irq            = alcor_map_irq,
 318         .pci_swizzle            = common_swizzle,
 319
 320         .sys = { .cia = {
 321                 .gru_int_req_bits = XLT_GRU_INT_REQ_BITS
 322         }}
 323 };
 324
 325 /* No alpha_mv alias for XLT, since we compile it in unconditionally
 326    with ALCOR; setup_arch knows how to cope.  */