drivers/bluetooth/btwilink.c

   1 /*
   2  *  Texas Instrument's Bluetooth Driver For Shared Transport.
   3  *
   4  *  Bluetooth Driver acts as interface between HCI core and
   5  *  TI Shared Transport Layer.
   6  *
   7  *  Copyright (C) 2009-2010 Texas Instruments
   8  *  Author: Raja Mani <raja_mani@ti.com>
   9  *      Pavan Savoy <pavan_savoy@ti.com>
  10  *
  11  *  This program is free software; you can redistribute it and/or modify
  12  *  it under the terms of the GNU General Public License version 2 as
  13  *  published by the Free Software Foundation.
  14  *
  15  *  This program is distributed in the hope that it will be useful,
  16  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  *  GNU General Public License for more details.
  19  *
  20  *  You should have received a copy of the GNU General Public License
  21  *  along with this program; if not, write to the Free Software
  22  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  23  *
  24  */
  25 #define DEBUG
  26 #include <linux/platform_device.h>
  27 #include <net/bluetooth/bluetooth.h>
  28 #include <net/bluetooth/hci_core.h>
  29 #include <net/bluetooth/hci.h>
  30
  31 #include <linux/ti_wilink_st.h>
  32 #include <linux/module.h>
  33
  34 /* Bluetooth Driver Version */
  35 #define VERSION               "1.0"
  36 #define MAX_BT_CHNL_IDS         3
  37
  38 /* Number of seconds to wait for registration completion
  39  * when ST returns PENDING status.
  40  */
  41 #define BT_REGISTER_TIMEOUT   6000      /* 6 sec */
  42
  43 /**
  44  * struct ti_st - driver operation structure
  45  * @hdev: hci device pointer which binds to bt driver
  46  * @reg_status: ST registration callback status
  47  * @st_write: write function provided by the ST driver
  48  *      to be used by the driver during send_frame.
  49  * @wait_reg_completion - completion sync between ti_st_open
  50  *      and st_reg_completion_cb.
  51  */
  52 struct ti_st {
  53         struct hci_dev *hdev;
  54         char reg_status;
  55         long (*st_write) (struct sk_buff *);
  56         struct completion wait_reg_completion;
  57 };
  58
  59 /* Increments HCI counters based on pocket ID (cmd,acl,sco) */
  60 static inline void ti_st_tx_complete(struct ti_st *hst, int pkt_type)
  61 {
  62         struct hci_dev *hdev = hst->hdev;
  63
  64         /* Update HCI stat counters */
  65         switch (pkt_type) {
  66         case HCI_COMMAND_PKT:
  67                 hdev->stat.cmd_tx++;
  68                 break;
  69
  70         case HCI_ACLDATA_PKT:
  71                 hdev->stat.acl_tx++;
  72                 break;
  73
  74         case HCI_SCODATA_PKT:
  75                 hdev->stat.sco_tx++;
  76                 break;
  77         }
  78 }
  79
  80 /* ------- Interfaces to Shared Transport ------ */
  81
  82 /* Called by ST layer to indicate protocol registration completion
  83  * status.ti_st_open() function will wait for signal from this
  84  * API when st_register() function returns ST_PENDING.
  85  */
  86 static void st_reg_completion_cb(void *priv_data, char data)
  87 {
  88         struct ti_st *lhst = priv_data;
  89
  90         /* Save registration status for use in ti_st_open() */
  91         lhst->reg_status = data;
  92         /* complete the wait in ti_st_open() */
  93         complete(&lhst->wait_reg_completion);
  94 }
  95
  96 /* Called by Shared Transport layer when receive data is
  97  * available */
  98 static long st_receive(void *priv_data, struct sk_buff *skb)
  99 {
 100         struct ti_st *lhst = priv_data;
 101         int err;
 102
 103         if (!skb)
 104                 return -EFAULT;
 105
 106         if (!lhst) {
 107                 kfree_skb(skb);
 108                 return -EFAULT;
 109         }
 110
 111         skb->dev = (void *) lhst->hdev;
 112
 113         /* Forward skb to HCI core layer */
 114         err = hci_recv_frame(skb);
 115         if (err < 0) {
 116                 BT_ERR("Unable to push skb to HCI core(%d)", err);
 117                 return err;
 118         }
 119
 120         lhst->hdev->stat.byte_rx += skb->len;
 121
 122         return 0;
 123 }
 124
 125 /* ------- Interfaces to HCI layer ------ */
 126 /* protocol structure registered with shared transport */
 127 static struct st_proto_s ti_st_proto[MAX_BT_CHNL_IDS] = {
 128         {
 129                 .chnl_id = HCI_EVENT_PKT, /* HCI Events */
 130                 .hdr_len = sizeof(struct hci_event_hdr),
 131                 .offset_len_in_hdr = offsetof(struct hci_event_hdr, plen),
 132                 .len_size = 1, /* sizeof(plen) in struct hci_event_hdr */
 133                 .reserve = 8,
 134         },
 135         {
 136                 .chnl_id = HCI_ACLDATA_PKT, /* ACL */
 137                 .hdr_len = sizeof(struct hci_acl_hdr),
 138                 .offset_len_in_hdr = offsetof(struct hci_acl_hdr, dlen),
 139                 .len_size = 2,  /* sizeof(dlen) in struct hci_acl_hdr */
 140                 .reserve = 8,
 141         },
 142         {
 143                 .chnl_id = HCI_SCODATA_PKT, /* SCO */
 144                 .hdr_len = sizeof(struct hci_sco_hdr),
 145                 .offset_len_in_hdr = offsetof(struct hci_sco_hdr, dlen),
 146                 .len_size = 1, /* sizeof(dlen) in struct hci_sco_hdr */
 147                 .reserve = 8,
 148         },
 149 };
 150
 151 /* Called from HCI core to initialize the device */
 152 static int ti_st_open(struct hci_dev *hdev)
 153 {
 154         unsigned long timeleft;
 155         struct ti_st *hst;
 156         int err, i;
 157
 158         BT_DBG("%s %p", hdev->name, hdev);
 159
 160         if (test_and_set_bit(HCI_RUNNING, &hdev->flags))
 161                 return -EBUSY;
 162
 163         /* provide contexts for callbacks from ST */
 164         hst = hdev->driver_data;
 165
 166         for (i = 0; i < MAX_BT_CHNL_IDS; i++) {
 167                 ti_st_proto[i].priv_data = hst;
 168                 ti_st_proto[i].max_frame_size = HCI_MAX_FRAME_SIZE;
 169                 ti_st_proto[i].recv = st_receive;
 170                 ti_st_proto[i].reg_complete_cb = st_reg_completion_cb;
 171
 172                 /* Prepare wait-for-completion handler */
 173                 init_completion(&hst->wait_reg_completion);
 174                 /* Reset ST registration callback status flag,
 175                  * this value will be updated in
 176                  * st_reg_completion_cb()
 177                  * function whenever it called from ST driver.
 178                  */
 179                 hst->reg_status = -EINPROGRESS;
 180
 181                 err = st_register(&ti_st_proto[i]);
 182                 if (!err)
 183                         goto done;
 184
 185                 if (err != -EINPROGRESS) {
 186                         clear_bit(HCI_RUNNING, &hdev->flags);
 187                         BT_ERR("st_register failed %d", err);
 188                         return err;
 189                 }
 190
 191                 /* ST is busy with either protocol
 192                  * registration or firmware download.
 193                  */
 194                 BT_DBG("waiting for registration "
 195                                 "completion signal from ST");
 196                 timeleft = wait_for_completion_timeout
 197                         (&hst->wait_reg_completion,
 198                          msecs_to_jiffies(BT_REGISTER_TIMEOUT));
 199                 if (!timeleft) {
 200                         clear_bit(HCI_RUNNING, &hdev->flags);
 201                         BT_ERR("Timeout(%d sec),didn't get reg "
 202                                         "completion signal from ST",
 203                                         BT_REGISTER_TIMEOUT / 1000);
 204                         return -ETIMEDOUT;
 205                 }
 206
 207                 /* Is ST registration callback
 208                  * called with ERROR status? */
 209                 if (hst->reg_status != 0) {
 210                         clear_bit(HCI_RUNNING, &hdev->flags);
 211                         BT_ERR("ST registration completed with invalid "
 212                                         "status %d", hst->reg_status);
 213                         return -EAGAIN;
 214                 }
 215
 216 done:
 217                 hst->st_write = ti_st_proto[i].write;
 218                 if (!hst->st_write) {
 219                         BT_ERR("undefined ST write function");
 220                         clear_bit(HCI_RUNNING, &hdev->flags);
 221                         for (i = 0; i < MAX_BT_CHNL_IDS; i++) {
 222                                 /* Undo registration with ST */
 223                                 err = st_unregister(&ti_st_proto[i]);
 224                                 if (err)
 225                                         BT_ERR("st_unregister() failed with "
 226                                                         "error %d", err);
 227                                 hst->st_write = NULL;
 228                         }
 229                         return -EIO;
 230                 }
 231         }
 232         return 0;
 233 }
 234
 235 /* Close device */
 236 static int ti_st_close(struct hci_dev *hdev)
 237 {
 238         int err, i;
 239         struct ti_st *hst = hdev->driver_data;
 240
 241         if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
 242                 return 0;
 243
 244         for (i = MAX_BT_CHNL_IDS-1; i >= 0; i--) {
 245                 err = st_unregister(&ti_st_proto[i]);
 246                 if (err)
 247                         BT_ERR("st_unregister(%d) failed with error %d",
 248                                         ti_st_proto[i].chnl_id, err);
 249         }
 250
 251         hst->st_write = NULL;
 252
 253         return err;
 254 }
 255
 256 static int ti_st_send_frame(struct sk_buff *skb)
 257 {
 258         struct hci_dev *hdev;
 259         struct ti_st *hst;
 260         long len;
 261
 262         hdev = (struct hci_dev *)skb->dev;
 263
 264         if (!test_bit(HCI_RUNNING, &hdev->flags))
 265                 return -EBUSY;
 266
 267         hst = hdev->driver_data;
 268
 269         /* Prepend skb with frame type */
 270         memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
 271
 272         BT_DBG("%s: type %d len %d", hdev->name, bt_cb(skb)->pkt_type,
 273                         skb->len);
 274
 275         /* Insert skb to shared transport layer's transmit queue.
 276          * Freeing skb memory is taken care in shared transport layer,
 277          * so don't free skb memory here.
 278          */
 279         len = hst->st_write(skb);
 280         if (len < 0) {
 281                 kfree_skb(skb);
 282                 BT_ERR("ST write failed (%ld)", len);
 283                 /* Try Again, would only fail if UART has gone bad */
 284                 return -EAGAIN;
 285         }
 286
 287         /* ST accepted our skb. So, Go ahead and do rest */
 288         hdev->stat.byte_tx += len;
 289         ti_st_tx_complete(hst, bt_cb(skb)->pkt_type);
 290
 291         return 0;
 292 }
 293
 294 static void ti_st_destruct(struct hci_dev *hdev)
 295 {
 296         BT_DBG("%s", hdev->name);
 297         /* do nothing here, since platform remove
 298          * would free the hdev->driver_data
 299          */
 300 }
 301
 302 static int bt_ti_probe(struct platform_device *pdev)
 303 {
 304         static struct ti_st *hst;
 305         struct hci_dev *hdev;
 306         int err;
 307
 308         hst = kzalloc(sizeof(struct ti_st), GFP_KERNEL);
 309         if (!hst)
 310                 return -ENOMEM;
 311
 312         /* Expose "hciX" device to user space */
 313         hdev = hci_alloc_dev();
 314         if (!hdev) {
 315                 kfree(hst);
 316                 return -ENOMEM;
 317         }
 318
 319         BT_DBG("hdev %p", hdev);
 320
 321         hst->hdev = hdev;
 322         hdev->bus = HCI_UART;
 323         hdev->driver_data = hst;
 324         hdev->open = ti_st_open;
 325         hdev->close = ti_st_close;
 326         hdev->flush = NULL;
 327         hdev->send = ti_st_send_frame;
 328         hdev->destruct = ti_st_destruct;
 329         hdev->owner = THIS_MODULE;
 330
 331         err = hci_register_dev(hdev);
 332         if (err < 0) {
 333                 BT_ERR("Can't register HCI device error %d", err);
 334                 kfree(hst);
 335                 hci_free_dev(hdev);
 336                 return err;
 337         }
 338
 339         BT_DBG("HCI device registered (hdev %p)", hdev);
 340
 341         dev_set_drvdata(&pdev->dev, hst);
 342         return err;
 343 }
 344
 345 static int bt_ti_remove(struct platform_device *pdev)
 346 {
 347         struct hci_dev *hdev;
 348         struct ti_st *hst = dev_get_drvdata(&pdev->dev);
 349
 350         if (!hst)
 351                 return -EFAULT;
 352
 353         BT_DBG("%s", hst->hdev->name);
 354
 355         hdev = hst->hdev;
 356         ti_st_close(hdev);
 357         hci_unregister_dev(hdev);
 358
 359         hci_free_dev(hdev);
 360         kfree(hst);
 361
 362         dev_set_drvdata(&pdev->dev, NULL);
 363         return 0;
 364 }
 365
 366 static struct platform_driver btwilink_driver = {
 367         .probe = bt_ti_probe,
 368         .remove = bt_ti_remove,
 369         .driver = {
 370                 .name = "btwilink",
 371                 .owner = THIS_MODULE,
 372         },
 373 };
 374
 375 /* ------- Module Init/Exit interfaces ------ */
 376 static int __init btwilink_init(void)
 377 {
 378         BT_INFO("Bluetooth Driver for TI WiLink - Version %s", VERSION);
 379
 380         return platform_driver_register(&btwilink_driver);
 381 }
 382
 383 static void __exit btwilink_exit(void)
 384 {
 385         platform_driver_unregister(&btwilink_driver);
 386 }
 387
 388 module_init(btwilink_init);
 389 module_exit(btwilink_exit);
 390
 391 /* ------ Module Info ------ */
 392
 393 MODULE_AUTHOR("Raja Mani <raja_mani@ti.com>");
 394 MODULE_DESCRIPTION("Bluetooth Driver for TI Shared Transport" VERSION);
 395 MODULE_VERSION(VERSION);
 396 MODULE_LICENSE("GPL");