2 * NOP USB transceiver for all USB transceiver which are either built-in
3 * into USB IP or which are mostly autonomous.
5 * Copyright (C) 2009 Texas Instruments Inc
6 * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 * This provides a "nop" transceiver for PHYs which are
24 * autonomous such as isp1504, isp1707, etc.
27 #include <linux/module.h>
28 #include <linux/platform_device.h>
29 #include <linux/dma-mapping.h>
30 #include <linux/usb/otg.h>
31 #include <linux/usb/usb_phy_generic.h>
32 #include <linux/slab.h>
33 #include <linux/clk.h>
34 #include <linux/regulator/consumer.h>
36 #include <linux/of_gpio.h>
37 #include <linux/gpio.h>
38 #include <linux/delay.h>
40 #include "phy-generic.h"
42 struct platform_device
*usb_phy_generic_register(void)
44 return platform_device_register_simple("usb_phy_generic",
45 PLATFORM_DEVID_AUTO
, NULL
, 0);
47 EXPORT_SYMBOL_GPL(usb_phy_generic_register
);
49 void usb_phy_generic_unregister(struct platform_device
*pdev
)
51 platform_device_unregister(pdev
);
53 EXPORT_SYMBOL_GPL(usb_phy_generic_unregister
);
55 static int nop_set_suspend(struct usb_phy
*x
, int suspend
)
60 static void nop_reset_set(struct usb_phy_generic
*nop
, int asserted
)
64 if (!gpio_is_valid(nop
->gpio_reset
))
68 if (nop
->reset_active_low
)
71 gpio_set_value_cansleep(nop
->gpio_reset
, value
);
74 usleep_range(10000, 20000);
77 int usb_gen_phy_init(struct usb_phy
*phy
)
79 struct usb_phy_generic
*nop
= dev_get_drvdata(phy
->dev
);
81 if (!IS_ERR(nop
->vcc
)) {
82 if (regulator_enable(nop
->vcc
))
83 dev_err(phy
->dev
, "Failed to enable power\n");
86 if (!IS_ERR(nop
->clk
))
87 clk_prepare_enable(nop
->clk
);
90 nop_reset_set(nop
, 0);
94 EXPORT_SYMBOL_GPL(usb_gen_phy_init
);
96 void usb_gen_phy_shutdown(struct usb_phy
*phy
)
98 struct usb_phy_generic
*nop
= dev_get_drvdata(phy
->dev
);
101 nop_reset_set(nop
, 1);
103 if (!IS_ERR(nop
->clk
))
104 clk_disable_unprepare(nop
->clk
);
106 if (!IS_ERR(nop
->vcc
)) {
107 if (regulator_disable(nop
->vcc
))
108 dev_err(phy
->dev
, "Failed to disable power\n");
111 EXPORT_SYMBOL_GPL(usb_gen_phy_shutdown
);
113 static int nop_set_peripheral(struct usb_otg
*otg
, struct usb_gadget
*gadget
)
123 otg
->gadget
= gadget
;
124 otg
->state
= OTG_STATE_B_IDLE
;
128 static int nop_set_host(struct usb_otg
*otg
, struct usb_bus
*host
)
142 int usb_phy_gen_create_phy(struct device
*dev
, struct usb_phy_generic
*nop
,
143 struct usb_phy_generic_platform_data
*pdata
)
145 enum usb_phy_type type
= USB_PHY_TYPE_USB2
;
149 bool needs_vcc
= false;
151 nop
->reset_active_low
= true; /* default behaviour */
154 struct device_node
*node
= dev
->of_node
;
155 enum of_gpio_flags flags
= 0;
157 if (of_property_read_u32(node
, "clock-frequency", &clk_rate
))
160 needs_vcc
= of_property_read_bool(node
, "vcc-supply");
161 nop
->gpio_reset
= of_get_named_gpio_flags(node
, "reset-gpios",
163 if (nop
->gpio_reset
== -EPROBE_DEFER
)
164 return -EPROBE_DEFER
;
166 nop
->reset_active_low
= flags
& OF_GPIO_ACTIVE_LOW
;
170 clk_rate
= pdata
->clk_rate
;
171 needs_vcc
= pdata
->needs_vcc
;
172 nop
->gpio_reset
= pdata
->gpio_reset
;
174 nop
->gpio_reset
= -1;
177 nop
->phy
.otg
= devm_kzalloc(dev
, sizeof(*nop
->phy
.otg
),
182 nop
->clk
= devm_clk_get(dev
, "main_clk");
183 if (IS_ERR(nop
->clk
)) {
184 dev_dbg(dev
, "Can't get phy clock: %ld\n",
188 if (!IS_ERR(nop
->clk
) && clk_rate
) {
189 err
= clk_set_rate(nop
->clk
, clk_rate
);
191 dev_err(dev
, "Error setting clock rate\n");
196 nop
->vcc
= devm_regulator_get(dev
, "vcc");
197 if (IS_ERR(nop
->vcc
)) {
198 dev_dbg(dev
, "Error getting vcc regulator: %ld\n",
201 return -EPROBE_DEFER
;
204 if (gpio_is_valid(nop
->gpio_reset
)) {
205 unsigned long gpio_flags
;
208 if (nop
->reset_active_low
)
209 gpio_flags
= GPIOF_OUT_INIT_LOW
;
211 gpio_flags
= GPIOF_OUT_INIT_HIGH
;
213 err
= devm_gpio_request_one(dev
, nop
->gpio_reset
,
214 gpio_flags
, dev_name(dev
));
216 dev_err(dev
, "Error requesting RESET GPIO %d\n",
223 nop
->phy
.dev
= nop
->dev
;
224 nop
->phy
.label
= "nop-xceiv";
225 nop
->phy
.set_suspend
= nop_set_suspend
;
226 nop
->phy
.type
= type
;
228 nop
->phy
.otg
->state
= OTG_STATE_UNDEFINED
;
229 nop
->phy
.otg
->usb_phy
= &nop
->phy
;
230 nop
->phy
.otg
->set_host
= nop_set_host
;
231 nop
->phy
.otg
->set_peripheral
= nop_set_peripheral
;
235 EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy
);
237 static int usb_phy_generic_probe(struct platform_device
*pdev
)
239 struct device
*dev
= &pdev
->dev
;
240 struct usb_phy_generic
*nop
;
243 nop
= devm_kzalloc(dev
, sizeof(*nop
), GFP_KERNEL
);
247 err
= usb_phy_gen_create_phy(dev
, nop
, dev_get_platdata(&pdev
->dev
));
251 nop
->phy
.init
= usb_gen_phy_init
;
252 nop
->phy
.shutdown
= usb_gen_phy_shutdown
;
254 err
= usb_add_phy_dev(&nop
->phy
);
256 dev_err(&pdev
->dev
, "can't register transceiver, err: %d\n",
261 platform_set_drvdata(pdev
, nop
);
266 static int usb_phy_generic_remove(struct platform_device
*pdev
)
268 struct usb_phy_generic
*nop
= platform_get_drvdata(pdev
);
270 usb_remove_phy(&nop
->phy
);
275 static const struct of_device_id nop_xceiv_dt_ids
[] = {
276 { .compatible
= "usb-nop-xceiv" },
280 MODULE_DEVICE_TABLE(of
, nop_xceiv_dt_ids
);
282 static struct platform_driver usb_phy_generic_driver
= {
283 .probe
= usb_phy_generic_probe
,
284 .remove
= usb_phy_generic_remove
,
286 .name
= "usb_phy_generic",
287 .of_match_table
= nop_xceiv_dt_ids
,
291 static int __init
usb_phy_generic_init(void)
293 return platform_driver_register(&usb_phy_generic_driver
);
295 subsys_initcall(usb_phy_generic_init
);
297 static void __exit
usb_phy_generic_exit(void)
299 platform_driver_unregister(&usb_phy_generic_driver
);
301 module_exit(usb_phy_generic_exit
);
303 MODULE_ALIAS("platform:usb_phy_generic");
304 MODULE_AUTHOR("Texas Instruments Inc");
305 MODULE_DESCRIPTION("NOP USB Transceiver driver");
306 MODULE_LICENSE("GPL");