x86: Make the vdso2c compiler use the host architecture headers
[linux/fpc-iii.git] / arch / arm / boot / dts / am3517.dtsi
blob5e3f5e86ffcfeff43f611032b9381390bbffdc9f
1 /*
2  * Device Tree Source for am3517 SoC
3  *
4  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
5  *
6  * This file is licensed under the terms of the GNU General Public License
7  * version 2.  This program is licensed "as is" without any warranty of any
8  * kind, whether express or implied.
9  */
11 #include "omap3.dtsi"
13 / {
14         aliases {
15                 serial3 = &uart4;
16         };
18         ocp {
19                 am35x_otg_hs: am35x_otg_hs@5c040000 {
20                         compatible = "ti,omap3-musb";
21                         ti,hwmods = "am35x_otg_hs";
22                         status = "disabled";
23                         reg = <0x5c040000 0x1000>;
24                         interrupts = <71>;
25                         interrupt-names = "mc";
26                 };
28                 davinci_emac: ethernet@0x5c000000 {
29                         compatible = "ti,am3517-emac";
30                         ti,hwmods = "davinci_emac";
31                         status = "disabled";
32                         reg = <0x5c000000 0x30000>;
33                         interrupts = <67 68 69 70>;
34                         syscon = <&scm_conf>;
35                         ti,davinci-ctrl-reg-offset = <0x10000>;
36                         ti,davinci-ctrl-mod-reg-offset = <0>;
37                         ti,davinci-ctrl-ram-offset = <0x20000>;
38                         ti,davinci-ctrl-ram-size = <0x2000>;
39                         ti,davinci-rmii-en = /bits/ 8 <1>;
40                         local-mac-address = [ 00 00 00 00 00 00 ];
41                 };
43                 davinci_mdio: ethernet@0x5c030000 {
44                         compatible = "ti,davinci_mdio";
45                         ti,hwmods = "davinci_mdio";
46                         status = "disabled";
47                         reg = <0x5c030000 0x1000>;
48                         bus_freq = <1000000>;
49                         #address-cells = <1>;
50                         #size-cells = <0>;
51                 };
53                 uart4: serial@4809e000 {
54                         compatible = "ti,omap3-uart";
55                         ti,hwmods = "uart4";
56                         status = "disabled";
57                         reg = <0x4809e000 0x400>;
58                         interrupts = <84>;
59                         dmas = <&sdma 55 &sdma 54>;
60                         dma-names = "tx", "rx";
61                         clock-frequency = <48000000>;
62                 };
64                 omap3_pmx_core2: pinmux@480025d8 {
65                         compatible = "ti,omap3-padconf", "pinctrl-single";
66                         reg = <0x480025d8 0x24>;
67                         #address-cells = <1>;
68                         #size-cells = <0>;
69                         #interrupt-cells = <1>;
70                         interrupt-controller;
71                         pinctrl-single,register-width = <16>;
72                         pinctrl-single,function-mask = <0xff1f>;
73                 };
74         };
77 &iva {
78         status = "disabled";
81 &mailbox {
82         status = "disabled";
85 &mmu_isp {
86         status = "disabled";
89 &smartreflex_mpu_iva {
90         status = "disabled";
93 /include/ "am35xx-clocks.dtsi"
94 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"