arch/arm/boot/dts/armada-xp-gp.dts

   1 /*
   2  * Device Tree file for Marvell Armada XP development board
   3  * (DB-MV784MP-GP)
   4  *
   5  * Copyright (C) 2013-2014 Marvell
   6  *
   7  * Lior Amsalem <alior@marvell.com>
   8  * Gregory CLEMENT <gregory.clement@free-electrons.com>
   9  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  10  *
  11  * This file is dual-licensed: you can use it either under the terms
  12  * of the GPL or the X11 license, at your option. Note that this dual
  13  * licensing only applies to this file, and not this project as a
  14  * whole.
  15  *
  16  *  a) This file is free software; you can redistribute it and/or
  17  *     modify it under the terms of the GNU General Public License as
  18  *     published by the Free Software Foundation; either version 2 of the
  19  *     License, or (at your option) any later version.
  20  *
  21  *     This file is distributed in the hope that it will be useful
  22  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  23  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  24  *     GNU General Public License for more details.
  25  *
  26  * Or, alternatively
  27  *
  28  *  b) Permission is hereby granted, free of charge, to any person
  29  *     obtaining a copy of this software and associated documentation
  30  *     files (the "Software"), to deal in the Software without
  31  *     restriction, including without limitation the rights to use
  32  *     copy, modify, merge, publish, distribute, sublicense, and/or
  33  *     sell copies of the Software, and to permit persons to whom the
  34  *     Software is furnished to do so, subject to the following
  35  *     conditions:
  36  *
  37  *     The above copyright notice and this permission notice shall be
  38  *     included in all copies or substantial portions of the Software.
  39  *
  40  *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  41  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  42  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  43  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  44  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  45  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  46  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  47  *     OTHER DEALINGS IN THE SOFTWARE.
  48  *
  49  * Note: this Device Tree assumes that the bootloader has remapped the
  50  * internal registers to 0xf1000000 (instead of the default
  51  * 0xd0000000). The 0xf1000000 is the default used by the recent,
  52  * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
  53  * boards were delivered with an older version of the bootloader that
  54  * left internal registers mapped at 0xd0000000. If you are in this
  55  * situation, you should either update your bootloader (preferred
  56  * solution) or the below Device Tree should be adjusted.
  57  */
  58
  59 /dts-v1/;
  60 #include <dt-bindings/gpio/gpio.h>
  61 #include "armada-xp-mv78460.dtsi"
  62
  63 / {
  64         model = "Marvell Armada XP Development Board DB-MV784MP-GP";
  65         compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
  66
  67         chosen {
  68                 stdout-path = "serial0:115200n8";
  69         };
  70
  71         memory {
  72                 device_type = "memory";
  73                 /*
  74                  * 8 GB of plug-in RAM modules by default.The amount
  75                  * of memory available can be changed by the
  76                  * bootloader according the size of the module
  77                  * actually plugged. However, memory between
  78                  * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
  79                  * the address range used for I/O (internal registers,
  80                  * MBus windows).
  81                  */
  82                 reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
  83                       <0x00000001 0x00000000 0x00000001 0x00000000>;
  84         };
  85
  86         cpus {
  87                 pm_pic {
  88                         ctrl-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>,
  89                                      <&gpio0 17 GPIO_ACTIVE_LOW>,
  90                                      <&gpio0 18 GPIO_ACTIVE_LOW>;
  91                 };
  92         };
  93
  94         soc {
  95                 ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
  96                           MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
  97                           MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
  98                           MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
  99                           MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
 100                           MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
 101
 102                 devbus-bootcs {
 103                         status = "okay";
 104
 105                         /* Device Bus parameters are required */
 106
 107                         /* Read parameters */
 108                         devbus,bus-width    = <16>;
 109                         devbus,turn-off-ps  = <60000>;
 110                         devbus,badr-skew-ps = <0>;
 111                         devbus,acc-first-ps = <124000>;
 112                         devbus,acc-next-ps  = <248000>;
 113                         devbus,rd-setup-ps  = <0>;
 114                         devbus,rd-hold-ps   = <0>;
 115
 116                         /* Write parameters */
 117                         devbus,sync-enable = <0>;
 118                         devbus,wr-high-ps  = <60000>;
 119                         devbus,wr-low-ps   = <60000>;
 120                         devbus,ale-wr-ps   = <60000>;
 121
 122                         /* NOR 16 MiB */
 123                         nor@0 {
 124                                 compatible = "cfi-flash";
 125                                 reg = <0 0x1000000>;
 126                                 bank-width = <2>;
 127                         };
 128                 };
 129
 130                 pcie-controller {
 131                         status = "okay";
 132
 133                         /*
 134                          * The 3 slots are physically present as
 135                          * standard PCIe slots on the board.
 136                          */
 137                         pcie@1,0 {
 138                                 /* Port 0, Lane 0 */
 139                                 status = "okay";
 140                         };
 141                         pcie@9,0 {
 142                                 /* Port 2, Lane 0 */
 143                                 status = "okay";
 144                         };
 145                         pcie@10,0 {
 146                                 /* Port 3, Lane 0 */
 147                                 status = "okay";
 148                         };
 149                 };
 150
 151                 internal-regs {
 152                         serial@12000 {
 153                                 status = "okay";
 154                         };
 155                         serial@12100 {
 156                                 status = "okay";
 157                         };
 158                         serial@12200 {
 159                                 status = "okay";
 160                         };
 161                         serial@12300 {
 162                                 status = "okay";
 163                         };
 164                         pinctrl {
 165                                 pinctrl-0 = <&pic_pins>;
 166                                 pinctrl-names = "default";
 167                                 pic_pins: pic-pins-0 {
 168                                         marvell,pins = "mpp16", "mpp17",
 169                                                        "mpp18";
 170                                         marvell,function = "gpio";
 171                                 };
 172                         };
 173                         sata@a0000 {
 174                                 nr-ports = <2>;
 175                                 status = "okay";
 176                         };
 177
 178                         mdio {
 179                                 phy0: ethernet-phy@0 {
 180                                         reg = <16>;
 181                                 };
 182
 183                                 phy1: ethernet-phy@1 {
 184                                         reg = <17>;
 185                                 };
 186
 187                                 phy2: ethernet-phy@2 {
 188                                         reg = <18>;
 189                                 };
 190
 191                                 phy3: ethernet-phy@3 {
 192                                         reg = <19>;
 193                                 };
 194                         };
 195
 196                         ethernet@70000 {
 197                                 status = "okay";
 198                                 phy = <&phy0>;
 199                                 phy-mode = "qsgmii";
 200                                 buffer-manager = <&bm>;
 201                                 bm,pool-long = <0>;
 202                         };
 203                         ethernet@74000 {
 204                                 status = "okay";
 205                                 phy = <&phy1>;
 206                                 phy-mode = "qsgmii";
 207                                 buffer-manager = <&bm>;
 208                                 bm,pool-long = <1>;
 209                         };
 210                         ethernet@30000 {
 211                                 status = "okay";
 212                                 phy = <&phy2>;
 213                                 phy-mode = "qsgmii";
 214                                 buffer-manager = <&bm>;
 215                                 bm,pool-long = <2>;
 216                         };
 217                         ethernet@34000 {
 218                                 status = "okay";
 219                                 phy = <&phy3>;
 220                                 phy-mode = "qsgmii";
 221                                 buffer-manager = <&bm>;
 222                                 bm,pool-long = <3>;
 223                         };
 224
 225                         /* Front-side USB slot */
 226                         usb@50000 {
 227                                 status = "okay";
 228                         };
 229
 230                         /* Back-side USB slot */
 231                         usb@51000 {
 232                                 status = "okay";
 233                         };
 234
 235                         spi0: spi@10600 {
 236                                 status = "okay";
 237
 238                                 spi-flash@0 {
 239                                         #address-cells = <1>;
 240                                         #size-cells = <1>;
 241                                         compatible = "n25q128a13", "jedec,spi-nor";
 242                                         reg = <0>; /* Chip select 0 */
 243                                         spi-max-frequency = <108000000>;
 244                                 };
 245                         };
 246
 247                         bm@c0000 {
 248                                 status = "okay";
 249                         };
 250
 251                         nand@d0000 {
 252                                 status = "okay";
 253                                 num-cs = <1>;
 254                                 marvell,nand-keep-config;
 255                                 marvell,nand-enable-arbiter;
 256                                 nand-on-flash-bbt;
 257                         };
 258                 };
 259
 260                 bm-bppi {
 261                         status = "okay";
 262                 };
 263         };
 264 };