arch/arm/boot/dts/dove-d3plug.dts

   1 /dts-v1/;
   2
   3 #include "dove.dtsi"
   4
   5 / {
   6         model = "Globalscale D3Plug";
   7         compatible = "globalscale,d3plug", "marvell,dove";
   8
   9         memory {
  10                 device_type = "memory";
  11                 reg = <0x00000000 0x40000000>;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
  16         };
  17
  18         leds {
  19                 compatible = "gpio-leds";
  20                 pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
  21                 pinctrl-names = "default";
  22
  23                 wlan-act {
  24                         label = "wlan-act";
  25                         gpios = <&gpio0 0 1>;
  26                 };
  27
  28                 wlan-ap {
  29                         label = "wlan-ap";
  30                         gpios = <&gpio0 1 1>;
  31                 };
  32
  33                 status {
  34                         label = "status";
  35                         gpios = <&gpio0 2 1>;
  36                 };
  37         };
  38
  39         regulators {
  40                 compatible = "simple-bus";
  41                 #address-cells = <1>;
  42                 #size-cells = <0>;
  43
  44                 usb_power: regulator@1 {
  45                         compatible = "regulator-fixed";
  46                         reg = <1>;
  47                         regulator-name = "USB Power";
  48                         regulator-min-microvolt = <5000000>;
  49                         regulator-max-microvolt = <5000000>;
  50                         enable-active-high;
  51                         regulator-always-on;
  52                         regulator-boot-on;
  53                         gpio = <&gpio0 8 0>;
  54                         pinctrl-0 = <&pmx_gpio_8>;
  55                         pinctrl-names = "default";
  56                 };
  57         };
  58 };
  59
  60 &uart0 { status = "okay"; };
  61 &sata0 { status = "okay"; };
  62 &i2c0 { status = "okay"; };
  63
  64 /* Samsung M8G2F eMMC */
  65 &sdio0 {
  66         status = "okay";
  67         non-removable;
  68         bus-width = <4>;
  69 };
  70
  71 /* Marvell SD8787 WLAN/BT */
  72 &sdio1 {
  73         status = "okay";
  74         non-removable;
  75 };
  76
  77 &spi0 {
  78         status = "okay";
  79
  80         /* spi0.0: 2M Flash Macronix MX25L1605D */
  81         spi-flash@0 {
  82                 compatible = "st,m25l1605d";
  83                 spi-max-frequency = <86000000>;
  84                 reg = <0>;
  85         };
  86 };
  87
  88 &pcie {
  89         status = "okay";
  90         /* Fresco Logic USB3.0 xHCI controller */
  91         pcie-port@0 {
  92                 status = "okay";
  93                 reset-gpios = <&gpio0 26 1>;
  94                 reset-delay-us = <20000>;
  95                 pinctrl-0 = <&pmx_camera_gpio>;
  96                 pinctrl-names = "default";
  97         };
  98         /* Mini-PCIe slot */
  99         pcie-port@1 {
 100                 status = "okay";
 101                 reset-gpios = <&gpio0 25 1>;
 102         };
 103 };