2 * Samsung's Exynos3250 based Monk board device tree source
4 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
7 * Device tree source file for Samsung's Monk board which is based on
8 * Samsung Exynos3250 SoC.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
16 #include "exynos3250.dtsi"
17 #include "exynos4412-ppmu-common.dtsi"
18 #include <dt-bindings/input/input.h>
19 #include <dt-bindings/gpio/gpio.h>
20 #include <dt-bindings/clock/samsung,s2mps11.h>
23 model = "Samsung Monk board";
24 compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3";
31 reg = <0x40000000 0x1ff00000>;
35 compatible = "samsung,secure-firmware";
36 reg = <0x0205F000 0x1000>;
40 compatible = "gpio-keys";
43 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_POWER>;
46 debounce-interval = <10>;
51 vemmc_reg: voltage-regulator-0 {
52 compatible = "regulator-fixed";
53 regulator-name = "V_EMMC_2.8V-fixed";
54 regulator-min-microvolt = <2800000>;
55 regulator-max-microvolt = <2800000>;
56 gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
60 i2c_max77836: i2c-gpio-0 {
61 compatible = "i2c-gpio";
62 gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
66 max77836: subpmic@25 {
67 compatible = "maxim,max77836";
68 interrupt-parent = <&gpx1>;
74 compatible = "maxim,max77836-muic";
78 compatible = "maxim,max77836-regulator";
79 safeout_reg: SAFEOUT {
80 regulator-name = "SAFEOUT";
83 charger_reg: CHARGER {
84 regulator-name = "CHARGER";
85 regulator-min-microamp = <45000>;
86 regulator-max-microamp = <475000>;
91 regulator-name = "MOT_2.7V";
92 regulator-min-microvolt = <1100000>;
93 regulator-max-microvolt = <2700000>;
97 regulator-name = "UNUSED_LDO2";
98 regulator-min-microvolt = <800000>;
99 regulator-max-microvolt = <3950000>;
104 compatible = "maxim,max77836-charger";
106 maxim,constant-uvolt = <4350000>;
107 maxim,fast-charge-uamp = <225000>;
108 maxim,eoc-uamp = <7500>;
109 maxim,ovp-uvolt = <6500000>;
115 compatible = "regulator-haptic";
116 haptic-supply = <&motor_reg>;
117 min-microvolt = <1100000>;
118 max-microvolt = <2700000>;
122 cpu_thermal: cpu-thermal {
125 /* Correspond to 500MHz at freq_table */
126 cooling-device = <&cpu0 5 5>;
129 /* Correspond to 200MHz at freq_table */
130 cooling-device = <&cpu0 8 8>;
138 vdd-supply = <&ldo3_reg>;
140 assigned-clocks = <&cmu CLK_SCLK_TSADC>;
141 assigned-clock-rates = <6000000>;
144 compatible = "ntc,ncp15wb473";
145 pullup-uv = <1800000>;
146 pullup-ohm = <100000>;
147 pulldown-ohm = <100000>;
148 io-channels = <&adc 0>;
152 compatible = "ntc,ncp15wb473";
153 pullup-uv = <1800000>;
154 pullup-ohm = <100000>;
155 pulldown-ohm = <100000>;
156 io-channels = <&adc 1>;
161 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
162 vdd-supply = <&buck1_reg>;
167 cpu0-supply = <&buck2_reg>;
171 vbus-supply = <&safeout_reg>;
176 vusb_d-supply = <&ldo15_reg>;
177 vusb_a-supply = <&ldo12_reg>;
178 dr_mode = "peripheral";
183 #address-cells = <1>;
185 samsung,i2c-sda-delay = <100>;
186 samsung,i2c-slave-addr = <0x10>;
187 samsung,i2c-max-bus-freq = <100000>;
191 compatible = "samsung,s2mps14-pmic";
192 interrupt-parent = <&gpx0>;
197 s2mps14_osc: clocks {
198 compatible = "samsung,s2mps14-clk";
200 clock-output-names = "s2mps14_ap", "unused",
206 regulator-name = "VAP_ALIVE_1.0V";
207 regulator-min-microvolt = <1000000>;
208 regulator-max-microvolt = <1000000>;
213 regulator-name = "VAP_M1_1.2V";
214 regulator-min-microvolt = <1200000>;
215 regulator-max-microvolt = <1200000>;
220 regulator-name = "VCC_AP_1.8V";
221 regulator-min-microvolt = <1800000>;
222 regulator-max-microvolt = <1800000>;
227 regulator-name = "VAP_AVDD_PLL1";
228 regulator-min-microvolt = <1800000>;
229 regulator-max-microvolt = <1800000>;
234 regulator-name = "VAP_PLL_ISO_1.0V";
235 regulator-min-microvolt = <1000000>;
236 regulator-max-microvolt = <1000000>;
241 regulator-name = "VAP_MIPI_1.0V";
242 regulator-min-microvolt = <1000000>;
243 regulator-max-microvolt = <1000000>;
247 regulator-name = "VAP_AVDD_1.8V";
248 regulator-min-microvolt = <1800000>;
249 regulator-max-microvolt = <1800000>;
254 regulator-name = "VAP_USB_3.0V";
255 regulator-min-microvolt = <3000000>;
256 regulator-max-microvolt = <3000000>;
261 regulator-name = "V_LPDDR_1.2V";
262 regulator-min-microvolt = <1200000>;
263 regulator-max-microvolt = <1200000>;
268 regulator-name = "UNUSED_LDO10";
269 regulator-min-microvolt = <1000000>;
270 regulator-max-microvolt = <1000000>;
274 regulator-name = "V_EMMC_1.8V";
275 regulator-min-microvolt = <1800000>;
276 regulator-max-microvolt = <1800000>;
277 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
281 regulator-name = "V_EMMC_2.8V";
282 regulator-min-microvolt = <2800000>;
283 regulator-max-microvolt = <2800000>;
284 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
288 regulator-name = "VSENSOR_2.85V";
289 regulator-min-microvolt = <2850000>;
290 regulator-max-microvolt = <2850000>;
295 regulator-name = "UNUSED_LDO14";
296 regulator-min-microvolt = <1800000>;
297 regulator-max-microvolt = <1800000>;
301 regulator-name = "TSP_AVDD_3.3V";
302 regulator-min-microvolt = <3300000>;
303 regulator-max-microvolt = <3300000>;
307 regulator-name = "LCD_VDD_3.3V";
308 regulator-min-microvolt = <3300000>;
309 regulator-max-microvolt = <3300000>;
313 regulator-name = "UNUSED_LDO17";
314 regulator-min-microvolt = <1800000>;
315 regulator-max-microvolt = <1800000>;
319 regulator-name = "UNUSED_LDO18";
320 regulator-min-microvolt = <1800000>;
321 regulator-max-microvolt = <1800000>;
325 regulator-name = "TSP_VDD_1.8V";
326 regulator-min-microvolt = <1800000>;
327 regulator-max-microvolt = <1800000>;
331 regulator-name = "LCD_VDD_1.8V";
332 regulator-min-microvolt = <1800000>;
333 regulator-max-microvolt = <1800000>;
337 regulator-name = "UNUSED_LDO21";
338 regulator-min-microvolt = <1000000>;
339 regulator-max-microvolt = <1000000>;
343 regulator-name = "UNUSED_LDO22";
344 regulator-min-microvolt = <1000000>;
345 regulator-max-microvolt = <1000000>;
349 regulator-name = "UNUSED_LDO23";
350 regulator-min-microvolt = <1000000>;
351 regulator-max-microvolt = <1000000>;
356 regulator-name = "UNUSED_LDO24";
357 regulator-min-microvolt = <1800000>;
358 regulator-max-microvolt = <1800000>;
362 regulator-name = "UNUSED_LDO25";
363 regulator-min-microvolt = <1800000>;
364 regulator-max-microvolt = <1800000>;
368 regulator-name = "VAP_MIF_1.0V";
369 regulator-min-microvolt = <800000>;
370 regulator-max-microvolt = <900000>;
375 regulator-name = "VAP_ARM_1.0V";
376 regulator-min-microvolt = <850000>;
377 regulator-max-microvolt = <1150000>;
382 regulator-name = "VAP_INT3D_1.0V";
383 regulator-min-microvolt = <850000>;
384 regulator-max-microvolt = <1000000>;
389 regulator-name = "VCC_SUB_1.95V";
390 regulator-min-microvolt = <1950000>;
391 regulator-max-microvolt = <1950000>;
396 regulator-name = "VCC_SUB_1.35V";
397 regulator-min-microvolt = <1350000>;
398 regulator-max-microvolt = <1350000>;
406 #address-cells = <1>;
408 samsung,i2c-sda-delay = <100>;
409 samsung,i2c-slave-addr = <0x10>;
410 samsung,i2c-max-bus-freq = <400000>;
414 compatible = "maxim,max77836-battery";
415 interrupt-parent = <&gpx1>;
426 #address-cells = <1>;
434 card-detect-delay = <200>;
435 vmmc-supply = <&vemmc_reg>;
436 clock-frequency = <100000000>;
437 clock-freq-min-max = <400000 100000000>;
438 samsung,dw-mshc-ciu-div = <1>;
439 samsung,dw-mshc-sdr-timing = <0 1>;
440 samsung,dw-mshc-ddr-timing = <1 2>;
441 pinctrl-names = "default";
442 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
448 assigned-clocks = <&cmu CLK_SCLK_UART0>;
449 assigned-clock-rates = <100000000>;
458 vtmu-supply = <&ldo7_reg>;
463 clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
464 clock-names = "rtc", "rtc_src";
469 clock-frequency = <24000000>;
473 pinctrl-names = "default";
474 pinctrl-0 = <&sleep0>;
476 sleep0: sleep-state {
477 PIN_SLP(gpa0-0, INPUT, DOWN);
478 PIN_SLP(gpa0-1, INPUT, DOWN);
479 PIN_SLP(gpa0-2, INPUT, DOWN);
480 PIN_SLP(gpa0-3, INPUT, DOWN);
481 PIN_SLP(gpa0-4, INPUT, DOWN);
482 PIN_SLP(gpa0-5, INPUT, DOWN);
483 PIN_SLP(gpa0-6, INPUT, DOWN);
484 PIN_SLP(gpa0-7, INPUT, DOWN);
486 PIN_SLP(gpa1-0, INPUT, DOWN);
487 PIN_SLP(gpa1-1, INPUT, DOWN);
488 PIN_SLP(gpa1-2, INPUT, DOWN);
489 PIN_SLP(gpa1-3, INPUT, DOWN);
490 PIN_SLP(gpa1-4, INPUT, DOWN);
491 PIN_SLP(gpa1-5, INPUT, DOWN);
493 PIN_SLP(gpb-0, PREV, NONE);
494 PIN_SLP(gpb-1, PREV, NONE);
495 PIN_SLP(gpb-2, PREV, NONE);
496 PIN_SLP(gpb-3, PREV, NONE);
497 PIN_SLP(gpb-4, INPUT, DOWN);
498 PIN_SLP(gpb-5, INPUT, DOWN);
499 PIN_SLP(gpb-6, INPUT, DOWN);
500 PIN_SLP(gpb-7, INPUT, DOWN);
502 PIN_SLP(gpc0-0, INPUT, DOWN);
503 PIN_SLP(gpc0-1, INPUT, DOWN);
504 PIN_SLP(gpc0-2, INPUT, DOWN);
505 PIN_SLP(gpc0-3, INPUT, DOWN);
506 PIN_SLP(gpc0-4, INPUT, DOWN);
508 PIN_SLP(gpc1-0, INPUT, DOWN);
509 PIN_SLP(gpc1-1, INPUT, DOWN);
510 PIN_SLP(gpc1-2, INPUT, DOWN);
511 PIN_SLP(gpc1-3, INPUT, DOWN);
512 PIN_SLP(gpc1-4, INPUT, DOWN);
514 PIN_SLP(gpd0-0, INPUT, DOWN);
515 PIN_SLP(gpd0-1, INPUT, DOWN);
516 PIN_SLP(gpd0-2, INPUT, NONE);
517 PIN_SLP(gpd0-3, INPUT, NONE);
519 PIN_SLP(gpd1-0, INPUT, NONE);
520 PIN_SLP(gpd1-1, INPUT, NONE);
521 PIN_SLP(gpd1-2, INPUT, NONE);
522 PIN_SLP(gpd1-3, INPUT, NONE);
527 pinctrl-names = "default";
528 pinctrl-0 = <&initial1 &sleep1>;
530 initial1: initial-state {
531 PIN_IN(gpk2-0, DOWN, LV1);
532 PIN_IN(gpk2-1, DOWN, LV1);
533 PIN_IN(gpk2-2, DOWN, LV1);
534 PIN_IN(gpk2-3, DOWN, LV1);
535 PIN_IN(gpk2-4, DOWN, LV1);
536 PIN_IN(gpk2-5, DOWN, LV1);
537 PIN_IN(gpk2-6, DOWN, LV1);
540 sleep1: sleep-state {
541 PIN_SLP(gpe0-0, PREV, NONE);
542 PIN_SLP(gpe0-1, PREV, NONE);
543 PIN_SLP(gpe0-2, INPUT, DOWN);
544 PIN_SLP(gpe0-3, INPUT, DOWN);
545 PIN_SLP(gpe0-4, PREV, NONE);
546 PIN_SLP(gpe0-5, INPUT, DOWN);
547 PIN_SLP(gpe0-6, INPUT, DOWN);
548 PIN_SLP(gpe0-7, INPUT, DOWN);
550 PIN_SLP(gpe1-0, INPUT, DOWN);
551 PIN_SLP(gpe1-1, PREV, NONE);
552 PIN_SLP(gpe1-2, INPUT, DOWN);
553 PIN_SLP(gpe1-3, INPUT, DOWN);
554 PIN_SLP(gpe1-4, INPUT, DOWN);
555 PIN_SLP(gpe1-5, INPUT, DOWN);
556 PIN_SLP(gpe1-6, INPUT, DOWN);
557 PIN_SLP(gpe1-7, INPUT, NONE);
559 PIN_SLP(gpe2-0, INPUT, NONE);
560 PIN_SLP(gpe2-1, INPUT, NONE);
561 PIN_SLP(gpe2-2, INPUT, NONE);
563 PIN_SLP(gpk0-0, INPUT, DOWN);
564 PIN_SLP(gpk0-1, INPUT, DOWN);
565 PIN_SLP(gpk0-2, OUT0, NONE);
566 PIN_SLP(gpk0-3, INPUT, DOWN);
567 PIN_SLP(gpk0-4, INPUT, DOWN);
568 PIN_SLP(gpk0-5, INPUT, DOWN);
569 PIN_SLP(gpk0-6, INPUT, DOWN);
570 PIN_SLP(gpk0-7, INPUT, DOWN);
572 PIN_SLP(gpk1-0, PREV, NONE);
573 PIN_SLP(gpk1-1, PREV, NONE);
574 PIN_SLP(gpk1-2, INPUT, DOWN);
575 PIN_SLP(gpk1-3, PREV, NONE);
576 PIN_SLP(gpk1-4, PREV, NONE);
577 PIN_SLP(gpk1-5, PREV, NONE);
578 PIN_SLP(gpk1-6, PREV, NONE);
580 PIN_SLP(gpk2-0, INPUT, DOWN);
581 PIN_SLP(gpk2-1, INPUT, DOWN);
582 PIN_SLP(gpk2-2, INPUT, DOWN);
583 PIN_SLP(gpk2-3, INPUT, DOWN);
584 PIN_SLP(gpk2-4, INPUT, DOWN);
585 PIN_SLP(gpk2-5, INPUT, DOWN);
586 PIN_SLP(gpk2-6, INPUT, DOWN);
588 PIN_SLP(gpl0-0, INPUT, DOWN);
589 PIN_SLP(gpl0-1, INPUT, DOWN);
590 PIN_SLP(gpl0-2, INPUT, DOWN);
591 PIN_SLP(gpl0-3, INPUT, DOWN);
593 PIN_SLP(gpm0-0, INPUT, DOWN);
594 PIN_SLP(gpm0-1, INPUT, DOWN);
595 PIN_SLP(gpm0-2, INPUT, DOWN);
596 PIN_SLP(gpm0-3, INPUT, DOWN);
597 PIN_SLP(gpm0-4, INPUT, DOWN);
598 PIN_SLP(gpm0-5, INPUT, DOWN);
599 PIN_SLP(gpm0-6, INPUT, DOWN);
600 PIN_SLP(gpm0-7, INPUT, DOWN);
602 PIN_SLP(gpm1-0, INPUT, DOWN);
603 PIN_SLP(gpm1-1, INPUT, DOWN);
604 PIN_SLP(gpm1-2, INPUT, DOWN);
605 PIN_SLP(gpm1-3, INPUT, DOWN);
606 PIN_SLP(gpm1-4, INPUT, DOWN);
607 PIN_SLP(gpm1-5, INPUT, DOWN);
608 PIN_SLP(gpm1-6, INPUT, DOWN);
610 PIN_SLP(gpm2-0, INPUT, DOWN);
611 PIN_SLP(gpm2-1, INPUT, DOWN);
612 PIN_SLP(gpm2-2, INPUT, DOWN);
613 PIN_SLP(gpm2-3, INPUT, DOWN);
614 PIN_SLP(gpm2-4, INPUT, DOWN);
616 PIN_SLP(gpm3-0, INPUT, DOWN);
617 PIN_SLP(gpm3-1, INPUT, DOWN);
618 PIN_SLP(gpm3-2, INPUT, DOWN);
619 PIN_SLP(gpm3-3, INPUT, DOWN);
620 PIN_SLP(gpm3-4, INPUT, DOWN);
621 PIN_SLP(gpm3-5, INPUT, DOWN);
622 PIN_SLP(gpm3-6, INPUT, DOWN);
623 PIN_SLP(gpm3-7, INPUT, DOWN);
625 PIN_SLP(gpm4-0, INPUT, DOWN);
626 PIN_SLP(gpm4-1, INPUT, DOWN);
627 PIN_SLP(gpm4-2, INPUT, DOWN);
628 PIN_SLP(gpm4-3, INPUT, DOWN);
629 PIN_SLP(gpm4-4, INPUT, DOWN);
630 PIN_SLP(gpm4-5, INPUT, DOWN);
631 PIN_SLP(gpm4-6, INPUT, DOWN);
632 PIN_SLP(gpm4-7, INPUT, DOWN);