x86: Make the vdso2c compiler use the host architecture headers
[linux/fpc-iii.git] / arch / arm / boot / dts / exynos5410-smdk5410.dts
blob0f6429e1b75c66ddb39af2b85ed560c6ab9288ac
1 /*
2  * SAMSUNG SMDK5410 board device tree source
3  *
4  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5  *              http://www.samsung.com
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
12 /dts-v1/;
13 #include "exynos5410.dtsi"
14 #include <dt-bindings/interrupt-controller/irq.h>
15 / {
16         model = "Samsung SMDK5410 board based on EXYNOS5410";
17         compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
19         memory {
20                 reg = <0x40000000 0x80000000>;
21         };
23         chosen {
24                 bootargs = "console=ttySAC2,115200";
25         };
27         fin_pll: xxti {
28                 compatible = "fixed-clock";
29                 clock-frequency = <24000000>;
30                 clock-output-names = "fin_pll";
31                 #clock-cells = <0>;
32         };
34         firmware@02037000 {
35                 compatible = "samsung,secure-firmware";
36                 reg = <0x02037000 0x1000>;
37         };
41 &mmc_0 {
42         status = "okay";
43         num-slots = <1>;
44         cap-mmc-highspeed;
45         broken-cd;
46         card-detect-delay = <200>;
47         samsung,dw-mshc-ciu-div = <3>;
48         samsung,dw-mshc-sdr-timing = <2 3>;
49         samsung,dw-mshc-ddr-timing = <1 2>;
50         bus-width = <8>;
53 &mmc_2 {
54         status = "okay";
55         num-slots = <1>;
56         cap-sd-highspeed;
57         card-detect-delay = <200>;
58         samsung,dw-mshc-ciu-div = <3>;
59         samsung,dw-mshc-sdr-timing = <2 3>;
60         samsung,dw-mshc-ddr-timing = <1 2>;
61         bus-width = <4>;
62         disable-wp;
65 &pinctrl_0 {
66         srom_ctl: srom-ctl {
67                 samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
68                                "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
69                 samsung,pin-function = <2>;
70                 samsung,pin-drv = <0>;
71         };
73         srom_ebi: srom-ebi {
74                 samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
75                                "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
76                                "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
77                                "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
78                                "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
79                                "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
80                 samsung,pin-function = <2>;
81                 samsung,pin-pud = <3>;
82                 samsung,pin-drv = <0>;
83         };
86 &sromc {
87         pinctrl-names = "default";
88         pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
90         ethernet@3,0 {
91                 compatible = "smsc,lan9115";
92                 reg = <3 0 0x10000>;
93                 phy-mode = "mii";
94                 interrupt-parent = <&gpx0>;
95                 interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
96                 reg-io-width = <2>;
97                 smsc,irq-push-pull;
98                 smsc,force-internal-phy;
100                 samsung,srom-page-mode;
101                 samsung,srom-timing = <9 12 1 9 1 1>;
102         };
105 &uart0 {
106         status = "okay";
109 &uart1 {
110         status = "okay";
113 &uart2 {
114         status = "okay";