2 * Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de>
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * version 2 as published by the Free Software Foundation.
13 * This file is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
20 * b) Permission is hereby granted, free of charge, to any person
21 * obtaining a copy of this software and associated documentation
22 * files (the "Software"), to deal in the Software without
23 * restriction, including without limitation the rights to use,
24 * copy, modify, merge, publish, distribute, sublicense, and/or
25 * sell copies of the Software, and to permit persons to whom the
26 * Software is furnished to do so, subject to the following
29 * The above copyright notice and this permission notice shall be
30 * included in all copies or substantial portions of the Software.
32 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
33 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
34 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
35 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
36 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
37 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
38 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
39 * OTHER DEALINGS IN THE SOFTWARE.
43 #include "imx6dl.dtsi"
44 #include "imx6qdl-tx6.dtsi"
47 model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard";
48 compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
56 backlight0: backlight0 {
57 compatible = "pwm-backlight";
58 pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
59 power-supply = <®_lcd0_pwr>;
61 * a poor man's way to create a 1:1 relationship between
62 * the PWM value and the actual duty cycle
64 brightness-levels = < 0 1 2 3 4 5 6 7 8 9
65 10 11 12 13 14 15 16 17 18 19
66 20 21 22 23 24 25 26 27 28 29
67 30 31 32 33 34 35 36 37 38 39
68 40 41 42 43 44 45 46 47 48 49
69 50 51 52 53 54 55 56 57 58 59
70 60 61 62 63 64 65 66 67 68 69
71 70 71 72 73 74 75 76 77 78 79
72 80 81 82 83 84 85 86 87 88 89
73 90 91 92 93 94 95 96 97 98 99
75 default-brightness-level = <50>;
78 backlight1: backlight1 {
79 compatible = "pwm-backlight";
80 pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
81 power-supply = <®_lcd1_pwr>;
83 * a poor man's way to create a 1:1 relationship between
84 * the PWM value and the actual duty cycle
86 brightness-levels = < 0 1 2 3 4 5 6 7 8 9
87 10 11 12 13 14 15 16 17 18 19
88 20 21 22 23 24 25 26 27 28 29
89 30 31 32 33 34 35 36 37 38 39
90 40 41 42 43 44 45 46 47 48 49
91 50 51 52 53 54 55 56 57 58 59
92 60 61 62 63 64 65 66 67 68 69
93 70 71 72 73 74 75 76 77 78 79
94 80 81 82 83 84 85 86 87 88 89
95 90 91 92 93 94 95 96 97 98 99
97 default-brightness-level = <50>;
106 xceiver-supply = <®_3v3>;
110 polytouch1: eeti@04 {
111 compatible = "eeti,egalax_ts";
113 pinctrl-names = "default";
114 pinctrl-0 = <&pinctrl_eeti>;
115 interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>;
116 wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
122 status = "disabled"; /* pads partially clash with backlight1 PWM */
128 lvds0: lvds-channel@0 {
129 fsl,data-mapping = "spwg";
130 fsl,data-width = <18>;
134 native-mode = <&lvds0_timing1>;
136 lvds0_timing0: hsd100pxn1 {
137 clock-frequency = <65000000>;
149 pixelclk-active = <1>;
153 clock-frequency = <25200000>;
165 pixelclk-active = <0>;
168 lvds0_timing2: nl12880bc20 {
169 clock-frequency = <71000000>;
181 pixelclk-active = <1>;
186 lvds1: lvds-channel@1 {
187 fsl,data-mapping = "spwg";
188 fsl,data-width = <18>;
192 native-mode = <&lvds1_timing2>;
194 lvds1_timing0: hsd100pxn1 {
195 clock-frequency = <65000000>;
207 pixelclk-active = <1>;
211 clock-frequency = <25200000>;
223 pixelclk-active = <0>;
226 lvds1_timing2: nl12880bc20 {
227 clock-frequency = <71000000>;
239 pixelclk-active = <1>;
250 pinctrl_eeti: eetigrp {
252 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */