arch/arm/boot/dts/stih418.dtsi

   1 /*
   2  * Copyright (C) 2014 STMicroelectronics Limited.
   3  * Author: Peter Griffin <peter.griffin@linaro.org>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * publishhed by the Free Software Foundation.
   8  */
   9 #include "stih418-clock.dtsi"
  10 #include "stih407-family.dtsi"
  11 #include "stih410-pinctrl.dtsi"
  12 / {
  13         cpus {
  14                 #address-cells = <1>;
  15                 #size-cells = <0>;
  16                 cpu@2 {
  17                         device_type = "cpu";
  18                         compatible = "arm,cortex-a9";
  19                         reg = <2>;
  20                         /* u-boot puts hpen in SBC dmem at 0xa4 offset */
  21                         cpu-release-addr = <0x94100A4>;
  22                 };
  23                 cpu@3 {
  24                         device_type = "cpu";
  25                         compatible = "arm,cortex-a9";
  26                         reg = <3>;
  27                         /* u-boot puts hpen in SBC dmem at 0xa4 offset */
  28                         cpu-release-addr = <0x94100A4>;
  29                 };
  30         };
  31
  32         soc {
  33                 usb2_picophy1: phy2 {
  34                         compatible = "st,stih407-usb2-phy";
  35                         #phy-cells = <0>;
  36                         st,syscfg = <&syscfg_core 0xf8 0xf4>;
  37                         resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
  38                                  <&picophyreset STIH407_PICOPHY0_RESET>;
  39                         reset-names = "global", "port";
  40                 };
  41
  42                 usb2_picophy2: phy3 {
  43                         compatible = "st,stih407-usb2-phy";
  44                         #phy-cells = <0>;
  45                         st,syscfg = <&syscfg_core 0xfc 0xf4>;
  46                         resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
  47                                  <&picophyreset STIH407_PICOPHY1_RESET>;
  48                         reset-names = "global", "port";
  49                 };
  50
  51                 ohci0: usb@9a03c00 {
  52                         compatible = "st,st-ohci-300x";
  53                         reg = <0x9a03c00 0x100>;
  54                         interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
  55                         clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
  56                         resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
  57                                  <&softreset STIH407_USB2_PORT0_SOFTRESET>;
  58                         reset-names = "power", "softreset";
  59                         phys = <&usb2_picophy1>;
  60                         phy-names = "usb";
  61                 };
  62
  63                 ehci0: usb@9a03e00 {
  64                         compatible = "st,st-ehci-300x";
  65                         reg = <0x9a03e00 0x100>;
  66                         interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
  67                         pinctrl-names = "default";
  68                         pinctrl-0 = <&pinctrl_usb0>;
  69                         clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
  70                         resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
  71                                  <&softreset STIH407_USB2_PORT0_SOFTRESET>;
  72                         reset-names = "power", "softreset";
  73                         phys = <&usb2_picophy1>;
  74                         phy-names = "usb";
  75                 };
  76
  77                 ohci1: usb@9a83c00 {
  78                         compatible = "st,st-ohci-300x";
  79                         reg = <0x9a83c00 0x100>;
  80                         interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
  81                         clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
  82                         resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
  83                                  <&softreset STIH407_USB2_PORT1_SOFTRESET>;
  84                         reset-names = "power", "softreset";
  85                         phys = <&usb2_picophy2>;
  86                         phy-names = "usb";
  87                 };
  88
  89                 ehci1: usb@9a83e00 {
  90                         compatible = "st,st-ehci-300x";
  91                         reg = <0x9a83e00 0x100>;
  92                         interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
  93                         pinctrl-names = "default";
  94                         pinctrl-0 = <&pinctrl_usb1>;
  95                         clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
  96                         resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
  97                                  <&softreset STIH407_USB2_PORT1_SOFTRESET>;
  98                         reset-names = "power", "softreset";
  99                         phys = <&usb2_picophy2>;
 100                         phy-names = "usb";
 101                 };
 102
 103                 mmc0: sdhci@09060000 {
 104                         assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
 105                         assigned-clock-parents = <&clk_s_c0_pll1 0>;
 106                         assigned-clock-rates = <200000000>;
 107                 };
 108         };
 109 };