arch/arm/boot/dts/stihxxx-b2120.dtsi

   1 /*
   2  * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
   3  * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * published by the Free Software Foundation.
   8  */
   9 #include <dt-bindings/clock/stih407-clks.h>
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include <dt-bindings/media/c8sectpfe.h>
  12 / {
  13         soc {
  14                 sbc_serial0: serial@9530000 {
  15                         status = "okay";
  16                 };
  17
  18                 leds {
  19                         compatible = "gpio-leds";
  20                         red {
  21                                 #gpio-cells = <2>;
  22                                 label = "Front Panel LED";
  23                                 gpios = <&pio4 1 0>;
  24                                 linux,default-trigger = "heartbeat";
  25                         };
  26                         green {
  27                                 #gpio-cells = <2>;
  28                                 gpios = <&pio1 3 0>;
  29                                 default-state = "off";
  30                         };
  31                 };
  32
  33                 pwm0: pwm@9810000 {
  34                         status = "okay";
  35                 };
  36
  37                 pwm1: pwm@9510000 {
  38                         status = "okay";
  39                 };
  40
  41                 ssc2: i2c@9842000 {
  42                         status = "okay";
  43                         clock-frequency = <100000>;
  44                         st,i2c-min-scl-pulse-width-us = <0>;
  45                         st,i2c-min-sda-pulse-width-us = <5>;
  46                 };
  47
  48                 ssc3: i2c@9843000 {
  49                         status = "okay";
  50                         clock-frequency = <100000>;
  51                         st,i2c-min-scl-pulse-width-us = <0>;
  52                         st,i2c-min-sda-pulse-width-us = <5>;
  53                 };
  54
  55                 i2c@9844000 {
  56                         status = "okay";
  57                 };
  58
  59                 i2c@9845000 {
  60                         status = "okay";
  61                 };
  62
  63                 i2c@9540000 {
  64                         status = "okay";
  65                 };
  66
  67                 mmc0: sdhci@09060000 {
  68                         status = "okay";
  69                 };
  70
  71                 mmc1: sdhci@09080000 {
  72                         status = "okay";
  73                 };
  74
  75                 /* SSC11 to HDMI */
  76                 hdmiddc: i2c@9541000 {
  77                         status = "okay";
  78                         /* HDMI V1.3a supports Standard mode only */
  79                         clock-frequency = <100000>;
  80                         st,i2c-min-scl-pulse-width-us = <0>;
  81                         st,i2c-min-sda-pulse-width-us = <5>;
  82                 };
  83
  84                 miphy28lp_phy: miphy28lp@9b22000 {
  85
  86                         phy_port0: port@9b22000 {
  87                                 st,osc-rdy;
  88                         };
  89
  90                         phy_port1: port@9b2a000 {
  91                                 st,osc-force-ext;
  92                         };
  93                 };
  94
  95                 st_dwc3: dwc3@8f94000 {
  96                         status = "okay";
  97                 };
  98
  99                 ethernet0: dwmac@9630000 {
 100                         st,tx-retime-src = "clkgen";
 101                         status = "okay";
 102                         phy-mode = "rgmii";
 103                         fixed-link = <0 1 1000 0 0>;
 104                 };
 105
 106                 demux@08a20000 {
 107                         compatible      = "st,stih407-c8sectpfe";
 108                         status          = "okay";
 109                         reg             = <0x08a20000 0x10000>,
 110                                           <0x08a00000 0x4000>;
 111                         reg-names       = "c8sectpfe", "c8sectpfe-ram";
 112                         interrupts      = <GIC_SPI 34 IRQ_TYPE_NONE>,
 113                                           <GIC_SPI 35 IRQ_TYPE_NONE>;
 114                         interrupt-names = "c8sectpfe-error-irq",
 115                                           "c8sectpfe-idle-irq";
 116                         pinctrl-0       = <&pinctrl_tsin0_serial>;
 117                         pinctrl-1       = <&pinctrl_tsin0_parallel>;
 118                         pinctrl-2       = <&pinctrl_tsin3_serial>;
 119                         pinctrl-3       = <&pinctrl_tsin4_serial_alt3>;
 120                         pinctrl-4       = <&pinctrl_tsin5_serial_alt1>;
 121                         pinctrl-names   = "tsin0-serial",
 122                                           "tsin0-parallel",
 123                                           "tsin3-serial",
 124                                           "tsin4-serial",
 125                                           "tsin5-serial";
 126                         clocks          = <&clk_s_c0_flexgen CLK_PROC_STFE>;
 127                         clock-names     = "c8sectpfe";
 128
 129                         /* tsin0 is TSA on NIMA */
 130                         tsin0: port@0 {
 131                                 tsin-num        = <0>;
 132                                 serial-not-parallel;
 133                                 i2c-bus         = <&ssc2>;
 134                                 reset-gpios     = <&pio15 4 GPIO_ACTIVE_HIGH>;
 135                                 dvb-card        = <STV0367_TDA18212_NIMA_1>;
 136                         };
 137                 };
 138         };
 139 };