?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge branch 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
[linux/fpc-iii.git] / sound / soc / samsung / s3c24xx-i2s.c
blob91e6871e5413a64898e33339d41903d15cba7f41
1 /*
2 * s3c24xx-i2s.c -- ALSA Soc Audio Layer
3 *
4 * (c) 2006 Wolfson Microelectronics PLC.
5 * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
6 *
7 * Copyright 2004-2005 Simtec Electronics
8 * http://armlinux.simtec.co.uk/
9 * Ben Dooks <ben@simtec.co.uk>
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
15 */
16
17 #include <linux/delay.h>
18 #include <linux/clk.h>
19 #include <linux/io.h>
20 #include <linux/gpio.h>
21 #include <linux/module.h>
22
23 #include <sound/soc.h>
24 #include <sound/pcm_params.h>
25
26 #include <mach/gpio-samsung.h>
27 #include <plat/gpio-cfg.h>
28 #include "regs-iis.h"
29
30 #include "dma.h"
31 #include "s3c24xx-i2s.h"
32
33 static struct snd_dmaengine_dai_dma_data s3c24xx_i2s_pcm_stereo_out = {
34 .chan_name = "tx",
35 .addr_width = 2,
36 };
37
38 static struct snd_dmaengine_dai_dma_data s3c24xx_i2s_pcm_stereo_in = {
39 .chan_name = "rx",
40 .addr_width = 2,
41 };
42
43 struct s3c24xx_i2s_info {
44 void __iomem *regs;
45 struct clk *iis_clk;
46 u32 iiscon;
47 u32 iismod;
48 u32 iisfcon;
49 u32 iispsr;
50 };
51 static struct s3c24xx_i2s_info s3c24xx_i2s;
52
53 static void s3c24xx_snd_txctrl(int on)
54 {
55 u32 iisfcon;
56 u32 iiscon;
57 u32 iismod;
58
59 iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
60 iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
61 iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
62
63 pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
64
65 if (on) {
66 iisfcon |= S3C2410_IISFCON_TXDMA | S3C2410_IISFCON_TXENABLE;
67 iiscon |= S3C2410_IISCON_TXDMAEN | S3C2410_IISCON_IISEN;
68 iiscon &= ~S3C2410_IISCON_TXIDLE;
69 iismod |= S3C2410_IISMOD_TXMODE;
70
71 writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
72 writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
73 writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
74 } else {
75 /* note, we have to disable the FIFOs otherwise bad things
76 * seem to happen when the DMA stops. According to the
77 * Samsung supplied kernel, this should allow the DMA
78 * engine and FIFOs to reset. If this isn't allowed, the
79 * DMA engine will simply freeze randomly.
80 */
81
82 iisfcon &= ~S3C2410_IISFCON_TXENABLE;
83 iisfcon &= ~S3C2410_IISFCON_TXDMA;
84 iiscon |= S3C2410_IISCON_TXIDLE;
85 iiscon &= ~S3C2410_IISCON_TXDMAEN;
86 iismod &= ~S3C2410_IISMOD_TXMODE;
87
88 writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
89 writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
90 writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
91 }
92
93 pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
94 }
95
96 static void s3c24xx_snd_rxctrl(int on)
97 {
98 u32 iisfcon;
99 u32 iiscon;
100 u32 iismod;
101
102 iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
103 iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
104 iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
105
106 pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
107
108 if (on) {
109 iisfcon |= S3C2410_IISFCON_RXDMA | S3C2410_IISFCON_RXENABLE;
110 iiscon |= S3C2410_IISCON_RXDMAEN | S3C2410_IISCON_IISEN;
111 iiscon &= ~S3C2410_IISCON_RXIDLE;
112 iismod |= S3C2410_IISMOD_RXMODE;
113
114 writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
115 writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
116 writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
117 } else {
118 /* note, we have to disable the FIFOs otherwise bad things
119 * seem to happen when the DMA stops. According to the
120 * Samsung supplied kernel, this should allow the DMA
121 * engine and FIFOs to reset. If this isn't allowed, the
122 * DMA engine will simply freeze randomly.
123 */
124
125 iisfcon &= ~S3C2410_IISFCON_RXENABLE;
126 iisfcon &= ~S3C2410_IISFCON_RXDMA;
127 iiscon |= S3C2410_IISCON_RXIDLE;
128 iiscon &= ~S3C2410_IISCON_RXDMAEN;
129 iismod &= ~S3C2410_IISMOD_RXMODE;
130
131 writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
132 writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
133 writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
134 }
135
136 pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
137 }
138
139 /*
140 * Wait for the LR signal to allow synchronisation to the L/R clock
141 * from the codec. May only be needed for slave mode.
142 */
143 static int s3c24xx_snd_lrsync(void)
144 {
145 u32 iiscon;
146 int timeout = 50; /* 5ms */
147
148 while (1) {
149 iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
150 if (iiscon & S3C2410_IISCON_LRINDEX)
151 break;
152
153 if (!timeout--)
154 return -ETIMEDOUT;
155 udelay(100);
156 }
157
158 return 0;
159 }
160
161 /*
162 * Check whether CPU is the master or slave
163 */
164 static inline int s3c24xx_snd_is_clkmaster(void)
165 {
166 return (readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & S3C2410_IISMOD_SLAVE) ? 0:1;
167 }
168
169 /*
170 * Set S3C24xx I2S DAI format
171 */
172 static int s3c24xx_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
173 unsigned int fmt)
174 {
175 u32 iismod;
176
177 iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
178 pr_debug("hw_params r: IISMOD: %x \n", iismod);
179
180 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
181 case SND_SOC_DAIFMT_CBM_CFM:
182 iismod |= S3C2410_IISMOD_SLAVE;
183 break;
184 case SND_SOC_DAIFMT_CBS_CFS:
185 iismod &= ~S3C2410_IISMOD_SLAVE;
186 break;
187 default:
188 return -EINVAL;
189 }
190
191 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
192 case SND_SOC_DAIFMT_LEFT_J:
193 iismod |= S3C2410_IISMOD_MSB;
194 break;
195 case SND_SOC_DAIFMT_I2S:
196 iismod &= ~S3C2410_IISMOD_MSB;
197 break;
198 default:
199 return -EINVAL;
200 }
201
202 writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
203 pr_debug("hw_params w: IISMOD: %x \n", iismod);
204
205 return 0;
206 }
207
208 static int s3c24xx_i2s_hw_params(struct snd_pcm_substream *substream,
209 struct snd_pcm_hw_params *params,
210 struct snd_soc_dai *dai)
211 {
212 struct snd_dmaengine_dai_dma_data *dma_data;
213 u32 iismod;
214
215 dma_data = snd_soc_dai_get_dma_data(dai, substream);
216
217 /* Working copies of register */
218 iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
219 pr_debug("hw_params r: IISMOD: %x\n", iismod);
220
221 switch (params_width(params)) {
222 case 8:
223 iismod &= ~S3C2410_IISMOD_16BIT;
224 dma_data->addr_width = 1;
225 break;
226 case 16:
227 iismod |= S3C2410_IISMOD_16BIT;
228 dma_data->addr_width = 2;
229 break;
230 default:
231 return -EINVAL;
232 }
233
234 writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
235 pr_debug("hw_params w: IISMOD: %x\n", iismod);
236
237 return 0;
238 }
239
240 static int s3c24xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
241 struct snd_soc_dai *dai)
242 {
243 int ret = 0;
244
245 switch (cmd) {
246 case SNDRV_PCM_TRIGGER_START:
247 case SNDRV_PCM_TRIGGER_RESUME:
248 case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
249 if (!s3c24xx_snd_is_clkmaster()) {
250 ret = s3c24xx_snd_lrsync();
251 if (ret)
252 goto exit_err;
253 }
254
255 if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
256 s3c24xx_snd_rxctrl(1);
257 else
258 s3c24xx_snd_txctrl(1);
259
260 break;
261 case SNDRV_PCM_TRIGGER_STOP:
262 case SNDRV_PCM_TRIGGER_SUSPEND:
263 case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
264 if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
265 s3c24xx_snd_rxctrl(0);
266 else
267 s3c24xx_snd_txctrl(0);
268 break;
269 default:
270 ret = -EINVAL;
271 break;
272 }
273
274 exit_err:
275 return ret;
276 }
277
278 /*
279 * Set S3C24xx Clock source
280 */
281 static int s3c24xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
282 int clk_id, unsigned int freq, int dir)
283 {
284 u32 iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
285
286 iismod &= ~S3C2440_IISMOD_MPLL;
287
288 switch (clk_id) {
289 case S3C24XX_CLKSRC_PCLK:
290 break;
291 case S3C24XX_CLKSRC_MPLL:
292 iismod |= S3C2440_IISMOD_MPLL;
293 break;
294 default:
295 return -EINVAL;
296 }
297
298 writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
299 return 0;
300 }
301
302 /*
303 * Set S3C24xx Clock dividers
304 */
305 static int s3c24xx_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai,
306 int div_id, int div)
307 {
308 u32 reg;
309
310 switch (div_id) {
311 case S3C24XX_DIV_BCLK:
312 reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~S3C2410_IISMOD_FS_MASK;
313 writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD);
314 break;
315 case S3C24XX_DIV_MCLK:
316 reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~(S3C2410_IISMOD_384FS);
317 writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD);
318 break;
319 case S3C24XX_DIV_PRESCALER:
320 writel(div, s3c24xx_i2s.regs + S3C2410_IISPSR);
321 reg = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
322 writel(reg | S3C2410_IISCON_PSCEN, s3c24xx_i2s.regs + S3C2410_IISCON);
323 break;
324 default:
325 return -EINVAL;
326 }
327
328 return 0;
329 }
330
331 /*
332 * To avoid duplicating clock code, allow machine driver to
333 * get the clockrate from here.
334 */
335 u32 s3c24xx_i2s_get_clockrate(void)
336 {
337 return clk_get_rate(s3c24xx_i2s.iis_clk);
338 }
339 EXPORT_SYMBOL_GPL(s3c24xx_i2s_get_clockrate);
340
341 static int s3c24xx_i2s_probe(struct snd_soc_dai *dai)
342 {
343 snd_soc_dai_init_dma_data(dai, &s3c24xx_i2s_pcm_stereo_out,
344 &s3c24xx_i2s_pcm_stereo_in);
345
346 s3c24xx_i2s.iis_clk = devm_clk_get(dai->dev, "iis");
347 if (IS_ERR(s3c24xx_i2s.iis_clk)) {
348 pr_err("failed to get iis_clock\n");
349 return PTR_ERR(s3c24xx_i2s.iis_clk);
350 }
351 clk_prepare_enable(s3c24xx_i2s.iis_clk);
352
353 /* Configure the I2S pins (GPE0...GPE4) in correct mode */
354 s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
355 S3C_GPIO_PULL_NONE);
356
357 writel(S3C2410_IISCON_IISEN, s3c24xx_i2s.regs + S3C2410_IISCON);
358
359 s3c24xx_snd_txctrl(0);
360 s3c24xx_snd_rxctrl(0);
361
362 return 0;
363 }
364
365 #ifdef CONFIG_PM
366 static int s3c24xx_i2s_suspend(struct snd_soc_dai *cpu_dai)
367 {
368 s3c24xx_i2s.iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
369 s3c24xx_i2s.iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
370 s3c24xx_i2s.iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
371 s3c24xx_i2s.iispsr = readl(s3c24xx_i2s.regs + S3C2410_IISPSR);
372
373 clk_disable_unprepare(s3c24xx_i2s.iis_clk);
374
375 return 0;
376 }
377
378 static int s3c24xx_i2s_resume(struct snd_soc_dai *cpu_dai)
379 {
380 clk_prepare_enable(s3c24xx_i2s.iis_clk);
381
382 writel(s3c24xx_i2s.iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
383 writel(s3c24xx_i2s.iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
384 writel(s3c24xx_i2s.iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
385 writel(s3c24xx_i2s.iispsr, s3c24xx_i2s.regs + S3C2410_IISPSR);
386
387 return 0;
388 }
389 #else
390 #define s3c24xx_i2s_suspend NULL
391 #define s3c24xx_i2s_resume NULL
392 #endif
393
394 #define S3C24XX_I2S_RATES \
395 (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
396 SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
397 SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
398
399 static const struct snd_soc_dai_ops s3c24xx_i2s_dai_ops = {
400 .trigger = s3c24xx_i2s_trigger,
401 .hw_params = s3c24xx_i2s_hw_params,
402 .set_fmt = s3c24xx_i2s_set_fmt,
403 .set_clkdiv = s3c24xx_i2s_set_clkdiv,
404 .set_sysclk = s3c24xx_i2s_set_sysclk,
405 };
406
407 static struct snd_soc_dai_driver s3c24xx_i2s_dai = {
408 .probe = s3c24xx_i2s_probe,
409 .suspend = s3c24xx_i2s_suspend,
410 .resume = s3c24xx_i2s_resume,
411 .playback = {
412 .channels_min = 2,
413 .channels_max = 2,
414 .rates = S3C24XX_I2S_RATES,
415 .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,},
416 .capture = {
417 .channels_min = 2,
418 .channels_max = 2,
419 .rates = S3C24XX_I2S_RATES,
420 .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,},
421 .ops = &s3c24xx_i2s_dai_ops,
422 };
423
424 static const struct snd_soc_component_driver s3c24xx_i2s_component = {
425 .name = "s3c24xx-i2s",
426 };
427
428 static int s3c24xx_iis_dev_probe(struct platform_device *pdev)
429 {
430 struct resource *res;
431 int ret;
432
433 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
434 s3c24xx_i2s.regs = devm_ioremap_resource(&pdev->dev, res);
435 if (IS_ERR(s3c24xx_i2s.regs))
436 return PTR_ERR(s3c24xx_i2s.regs);
437
438 s3c24xx_i2s_pcm_stereo_out.addr = res->start + S3C2410_IISFIFO;
439 s3c24xx_i2s_pcm_stereo_in.addr = res->start + S3C2410_IISFIFO;
440
441 ret = samsung_asoc_dma_platform_register(&pdev->dev, NULL,
442 NULL, NULL);
443 if (ret) {
444 dev_err(&pdev->dev, "Failed to register the DMA: %d\n", ret);
445 return ret;
446 }
447
448 ret = devm_snd_soc_register_component(&pdev->dev,
449 &s3c24xx_i2s_component, &s3c24xx_i2s_dai, 1);
450 if (ret)
451 dev_err(&pdev->dev, "Failed to register the DAI\n");
452
453 return ret;
454 }
455
456 static struct platform_driver s3c24xx_iis_driver = {
457 .probe = s3c24xx_iis_dev_probe,
458 .driver = {
459 .name = "s3c24xx-iis",
460 },
461 };
462
463 module_platform_driver(s3c24xx_iis_driver);
464
465 /* Module information */
466 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
467 MODULE_DESCRIPTION("s3c24xx I2S SoC Interface");
468 MODULE_LICENSE("GPL");
469 MODULE_ALIAS("platform:s3c24xx-iis");
Linux with added FPC-III support