2 * linux/arch/m32r/platforms/m32104ut/setup.c
4 * Setup routines for M32104UT Board
6 * Copyright (c) 2002-2005 Hiroyuki Kondo, Hirokazu Takata,
7 * Hitoshi Yamamoto, Mamoru Sakugawa,
8 * Naoto Sugai, Hayato Fujiwara
11 #include <linux/irq.h>
12 #include <linux/kernel.h>
13 #include <linux/init.h>
14 #include <linux/device.h>
16 #include <asm/system.h>
20 #define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long)))
22 icu_data_t icu_data
[NR_IRQS
];
24 static void disable_m32104ut_irq(unsigned int irq
)
26 unsigned long port
, data
;
29 data
= icu_data
[irq
].icucr
|M32R_ICUCR_ILEVEL7
;
33 static void enable_m32104ut_irq(unsigned int irq
)
35 unsigned long port
, data
;
38 data
= icu_data
[irq
].icucr
|M32R_ICUCR_IEN
|M32R_ICUCR_ILEVEL6
;
42 static void mask_and_ack_m32104ut(unsigned int irq
)
44 disable_m32104ut_irq(irq
);
47 static void end_m32104ut_irq(unsigned int irq
)
49 enable_m32104ut_irq(irq
);
52 static unsigned int startup_m32104ut_irq(unsigned int irq
)
54 enable_m32104ut_irq(irq
);
58 static void shutdown_m32104ut_irq(unsigned int irq
)
63 outl(M32R_ICUCR_ILEVEL7
, port
);
66 static struct hw_interrupt_type m32104ut_irq_type
=
68 .typename
= "M32104UT-IRQ",
69 .startup
= startup_m32104ut_irq
,
70 .shutdown
= shutdown_m32104ut_irq
,
71 .enable
= enable_m32104ut_irq
,
72 .disable
= disable_m32104ut_irq
,
73 .ack
= mask_and_ack_m32104ut
,
74 .end
= end_m32104ut_irq
77 void __init
init_IRQ(void)
86 #if defined(CONFIG_SMC91X)
87 /* INT#0: LAN controller on M32104UT-LAN (SMC91C111)*/
88 irq_desc
[M32R_IRQ_INT0
].status
= IRQ_DISABLED
;
89 irq_desc
[M32R_IRQ_INT0
].chip
= &m32104ut_irq_type
;
90 irq_desc
[M32R_IRQ_INT0
].action
= 0;
91 irq_desc
[M32R_IRQ_INT0
].depth
= 1;
92 icu_data
[M32R_IRQ_INT0
].icucr
= M32R_ICUCR_IEN
| M32R_ICUCR_ISMOD11
; /* "H" level sense */
93 disable_m32104ut_irq(M32R_IRQ_INT0
);
94 #endif /* CONFIG_SMC91X */
96 /* MFT2 : system timer */
97 irq_desc
[M32R_IRQ_MFT2
].status
= IRQ_DISABLED
;
98 irq_desc
[M32R_IRQ_MFT2
].chip
= &m32104ut_irq_type
;
99 irq_desc
[M32R_IRQ_MFT2
].action
= 0;
100 irq_desc
[M32R_IRQ_MFT2
].depth
= 1;
101 icu_data
[M32R_IRQ_MFT2
].icucr
= M32R_ICUCR_IEN
;
102 disable_m32104ut_irq(M32R_IRQ_MFT2
);
104 #ifdef CONFIG_SERIAL_M32R_SIO
105 /* SIO0_R : uart receive data */
106 irq_desc
[M32R_IRQ_SIO0_R
].status
= IRQ_DISABLED
;
107 irq_desc
[M32R_IRQ_SIO0_R
].chip
= &m32104ut_irq_type
;
108 irq_desc
[M32R_IRQ_SIO0_R
].action
= 0;
109 irq_desc
[M32R_IRQ_SIO0_R
].depth
= 1;
110 icu_data
[M32R_IRQ_SIO0_R
].icucr
= M32R_ICUCR_IEN
;
111 disable_m32104ut_irq(M32R_IRQ_SIO0_R
);
113 /* SIO0_S : uart send data */
114 irq_desc
[M32R_IRQ_SIO0_S
].status
= IRQ_DISABLED
;
115 irq_desc
[M32R_IRQ_SIO0_S
].chip
= &m32104ut_irq_type
;
116 irq_desc
[M32R_IRQ_SIO0_S
].action
= 0;
117 irq_desc
[M32R_IRQ_SIO0_S
].depth
= 1;
118 icu_data
[M32R_IRQ_SIO0_S
].icucr
= M32R_ICUCR_IEN
;
119 disable_m32104ut_irq(M32R_IRQ_SIO0_S
);
120 #endif /* CONFIG_SERIAL_M32R_SIO */
123 #if defined(CONFIG_SMC91X)
125 #define LAN_IOSTART 0x300
126 #define LAN_IOEND 0x320
127 static struct resource smc91x_resources
[] = {
129 .start
= (LAN_IOSTART
),
131 .flags
= IORESOURCE_MEM
,
134 .start
= M32R_IRQ_INT0
,
135 .end
= M32R_IRQ_INT0
,
136 .flags
= IORESOURCE_IRQ
,
140 static struct platform_device smc91x_device
= {
143 .num_resources
= ARRAY_SIZE(smc91x_resources
),
144 .resource
= smc91x_resources
,
148 static int __init
platform_init(void)
150 #if defined(CONFIG_SMC91X)
151 platform_device_register(&smc91x_device
);
155 arch_initcall(platform_init
);