drivers/scsi/imm.c

   1 /* imm.c   --  low level driver for the IOMEGA MatchMaker
   2  * parallel port SCSI host adapter.
   3  *
   4  * (The IMM is the embedded controller in the ZIP Plus drive.)
   5  *
   6  * My unofficial company acronym list is 21 pages long:
   7  *      FLA:    Four letter acronym with built in facility for
   8  *              future expansion to five letters.
   9  */
  10
  11 #include <linux/init.h>
  12 #include <linux/kernel.h>
  13 #include <linux/module.h>
  14 #include <linux/blkdev.h>
  15 #include <linux/parport.h>
  16 #include <linux/workqueue.h>
  17 #include <linux/delay.h>
  18 #include <linux/slab.h>
  19 #include <asm/io.h>
  20
  21 #include <scsi/scsi.h>
  22 #include <scsi/scsi_cmnd.h>
  23 #include <scsi/scsi_device.h>
  24 #include <scsi/scsi_host.h>
  25
  26 /* The following #define is to avoid a clash with hosts.c */
  27 #define IMM_PROBE_SPP   0x0001
  28 #define IMM_PROBE_PS2   0x0002
  29 #define IMM_PROBE_ECR   0x0010
  30 #define IMM_PROBE_EPP17 0x0100
  31 #define IMM_PROBE_EPP19 0x0200
  32
  33
  34 typedef struct {
  35         struct pardevice *dev;  /* Parport device entry         */
  36         int base;               /* Actual port address          */
  37         int base_hi;            /* Hi Base address for ECP-ISA chipset */
  38         int mode;               /* Transfer mode                */
  39         struct scsi_cmnd *cur_cmd;      /* Current queued command       */
  40         struct delayed_work imm_tq;     /* Polling interrupt stuff       */
  41         unsigned long jstart;   /* Jiffies at start             */
  42         unsigned failed:1;      /* Failure flag                 */
  43         unsigned dp:1;          /* Data phase present           */
  44         unsigned rd:1;          /* Read data in data phase      */
  45         unsigned wanted:1;      /* Parport sharing busy flag    */
  46         wait_queue_head_t *waiting;
  47         struct Scsi_Host *host;
  48         struct list_head list;
  49 } imm_struct;
  50
  51 static void imm_reset_pulse(unsigned int base);
  52 static int device_check(imm_struct *dev);
  53
  54 #include "imm.h"
  55
  56 static inline imm_struct *imm_dev(struct Scsi_Host *host)
  57 {
  58         return *(imm_struct **)&host->hostdata;
  59 }
  60
  61 static DEFINE_SPINLOCK(arbitration_lock);
  62
  63 static void got_it(imm_struct *dev)
  64 {
  65         dev->base = dev->dev->port->base;
  66         if (dev->cur_cmd)
  67                 dev->cur_cmd->SCp.phase = 1;
  68         else
  69                 wake_up(dev->waiting);
  70 }
  71
  72 static void imm_wakeup(void *ref)
  73 {
  74         imm_struct *dev = (imm_struct *) ref;
  75         unsigned long flags;
  76
  77         spin_lock_irqsave(&arbitration_lock, flags);
  78         if (dev->wanted) {
  79                 parport_claim(dev->dev);
  80                 got_it(dev);
  81                 dev->wanted = 0;
  82         }
  83         spin_unlock_irqrestore(&arbitration_lock, flags);
  84 }
  85
  86 static int imm_pb_claim(imm_struct *dev)
  87 {
  88         unsigned long flags;
  89         int res = 1;
  90         spin_lock_irqsave(&arbitration_lock, flags);
  91         if (parport_claim(dev->dev) == 0) {
  92                 got_it(dev);
  93                 res = 0;
  94         }
  95         dev->wanted = res;
  96         spin_unlock_irqrestore(&arbitration_lock, flags);
  97         return res;
  98 }
  99
 100 static void imm_pb_dismiss(imm_struct *dev)
 101 {
 102         unsigned long flags;
 103         int wanted;
 104         spin_lock_irqsave(&arbitration_lock, flags);
 105         wanted = dev->wanted;
 106         dev->wanted = 0;
 107         spin_unlock_irqrestore(&arbitration_lock, flags);
 108         if (!wanted)
 109                 parport_release(dev->dev);
 110 }
 111
 112 static inline void imm_pb_release(imm_struct *dev)
 113 {
 114         parport_release(dev->dev);
 115 }
 116
 117 /* This is to give the imm driver a way to modify the timings (and other
 118  * parameters) by writing to the /proc/scsi/imm/0 file.
 119  * Very simple method really... (Too simple, no error checking :( )
 120  * Reason: Kernel hackers HATE having to unload and reload modules for
 121  * testing...
 122  * Also gives a method to use a script to obtain optimum timings (TODO)
 123  */
 124 static inline int imm_proc_write(imm_struct *dev, char *buffer, int length)
 125 {
 126         unsigned long x;
 127
 128         if ((length > 5) && (strncmp(buffer, "mode=", 5) == 0)) {
 129                 x = simple_strtoul(buffer + 5, NULL, 0);
 130                 dev->mode = x;
 131                 return length;
 132         }
 133         printk("imm /proc: invalid variable\n");
 134         return (-EINVAL);
 135 }
 136
 137 static int imm_proc_info(struct Scsi_Host *host, char *buffer, char **start,
 138                         off_t offset, int length, int inout)
 139 {
 140         imm_struct *dev = imm_dev(host);
 141         int len = 0;
 142
 143         if (inout)
 144                 return imm_proc_write(dev, buffer, length);
 145
 146         len += sprintf(buffer + len, "Version : %s\n", IMM_VERSION);
 147         len +=
 148             sprintf(buffer + len, "Parport : %s\n",
 149                     dev->dev->port->name);
 150         len +=
 151             sprintf(buffer + len, "Mode    : %s\n",
 152                     IMM_MODE_STRING[dev->mode]);
 153
 154         /* Request for beyond end of buffer */
 155         if (offset > len)
 156                 return 0;
 157
 158         *start = buffer + offset;
 159         len -= offset;
 160         if (len > length)
 161                 len = length;
 162         return len;
 163 }
 164
 165 #if IMM_DEBUG > 0
 166 #define imm_fail(x,y) printk("imm: imm_fail(%i) from %s at line %d\n",\
 167            y, __func__, __LINE__); imm_fail_func(x,y);
 168 static inline void
 169 imm_fail_func(imm_struct *dev, int error_code)
 170 #else
 171 static inline void
 172 imm_fail(imm_struct *dev, int error_code)
 173 #endif
 174 {
 175         /* If we fail a device then we trash status / message bytes */
 176         if (dev->cur_cmd) {
 177                 dev->cur_cmd->result = error_code << 16;
 178                 dev->failed = 1;
 179         }
 180 }
 181
 182 /*
 183  * Wait for the high bit to be set.
 184  *
 185  * In principle, this could be tied to an interrupt, but the adapter
 186  * doesn't appear to be designed to support interrupts.  We spin on
 187  * the 0x80 ready bit.
 188  */
 189 static unsigned char imm_wait(imm_struct *dev)
 190 {
 191         int k;
 192         unsigned short ppb = dev->base;
 193         unsigned char r;
 194
 195         w_ctr(ppb, 0x0c);
 196
 197         k = IMM_SPIN_TMO;
 198         do {
 199                 r = r_str(ppb);
 200                 k--;
 201                 udelay(1);
 202         }
 203         while (!(r & 0x80) && (k));
 204
 205         /*
 206          * STR register (LPT base+1) to SCSI mapping:
 207          *
 208          * STR      imm     imm
 209          * ===================================
 210          * 0x80     S_REQ   S_REQ
 211          * 0x40     !S_BSY  (????)
 212          * 0x20     !S_CD   !S_CD
 213          * 0x10     !S_IO   !S_IO
 214          * 0x08     (????)  !S_BSY
 215          *
 216          * imm      imm     meaning
 217          * ==================================
 218          * 0xf0     0xb8    Bit mask
 219          * 0xc0     0x88    ZIP wants more data
 220          * 0xd0     0x98    ZIP wants to send more data
 221          * 0xe0     0xa8    ZIP is expecting SCSI command data
 222          * 0xf0     0xb8    end of transfer, ZIP is sending status
 223          */
 224         w_ctr(ppb, 0x04);
 225         if (k)
 226                 return (r & 0xb8);
 227
 228         /* Counter expired - Time out occurred */
 229         imm_fail(dev, DID_TIME_OUT);
 230         printk("imm timeout in imm_wait\n");
 231         return 0;               /* command timed out */
 232 }
 233
 234 static int imm_negotiate(imm_struct * tmp)
 235 {
 236         /*
 237          * The following is supposedly the IEEE 1284-1994 negotiate
 238          * sequence. I have yet to obtain a copy of the above standard
 239          * so this is a bit of a guess...
 240          *
 241          * A fair chunk of this is based on the Linux parport implementation
 242          * of IEEE 1284.
 243          *
 244          * Return 0 if data available
 245          *        1 if no data available
 246          */
 247
 248         unsigned short base = tmp->base;
 249         unsigned char a, mode;
 250
 251         switch (tmp->mode) {
 252         case IMM_NIBBLE:
 253                 mode = 0x00;
 254                 break;
 255         case IMM_PS2:
 256                 mode = 0x01;
 257                 break;
 258         default:
 259                 return 0;
 260         }
 261
 262         w_ctr(base, 0x04);
 263         udelay(5);
 264         w_dtr(base, mode);
 265         udelay(100);
 266         w_ctr(base, 0x06);
 267         udelay(5);
 268         a = (r_str(base) & 0x20) ? 0 : 1;
 269         udelay(5);
 270         w_ctr(base, 0x07);
 271         udelay(5);
 272         w_ctr(base, 0x06);
 273
 274         if (a) {
 275                 printk
 276                     ("IMM: IEEE1284 negotiate indicates no data available.\n");
 277                 imm_fail(tmp, DID_ERROR);
 278         }
 279         return a;
 280 }
 281
 282 /*
 283  * Clear EPP timeout bit.
 284  */
 285 static inline void epp_reset(unsigned short ppb)
 286 {
 287         int i;
 288
 289         i = r_str(ppb);
 290         w_str(ppb, i);
 291         w_str(ppb, i & 0xfe);
 292 }
 293
 294 /*
 295  * Wait for empty ECP fifo (if we are in ECP fifo mode only)
 296  */
 297 static inline void ecp_sync(imm_struct *dev)
 298 {
 299         int i, ppb_hi = dev->base_hi;
 300
 301         if (ppb_hi == 0)
 302                 return;
 303
 304         if ((r_ecr(ppb_hi) & 0xe0) == 0x60) {   /* mode 011 == ECP fifo mode */
 305                 for (i = 0; i < 100; i++) {
 306                         if (r_ecr(ppb_hi) & 0x01)
 307                                 return;
 308                         udelay(5);
 309                 }
 310                 printk("imm: ECP sync failed as data still present in FIFO.\n");
 311         }
 312 }
 313
 314 static int imm_byte_out(unsigned short base, const char *buffer, int len)
 315 {
 316         int i;
 317
 318         w_ctr(base, 0x4);       /* apparently a sane mode */
 319         for (i = len >> 1; i; i--) {
 320                 w_dtr(base, *buffer++);
 321                 w_ctr(base, 0x5);       /* Drop STROBE low */
 322                 w_dtr(base, *buffer++);
 323                 w_ctr(base, 0x0);       /* STROBE high + INIT low */
 324         }
 325         w_ctr(base, 0x4);       /* apparently a sane mode */
 326         return 1;               /* All went well - we hope! */
 327 }
 328
 329 static int imm_nibble_in(unsigned short base, char *buffer, int len)
 330 {
 331         unsigned char l;
 332         int i;
 333
 334         /*
 335          * The following is based on documented timing signals
 336          */
 337         w_ctr(base, 0x4);
 338         for (i = len; i; i--) {
 339                 w_ctr(base, 0x6);
 340                 l = (r_str(base) & 0xf0) >> 4;
 341                 w_ctr(base, 0x5);
 342                 *buffer++ = (r_str(base) & 0xf0) | l;
 343                 w_ctr(base, 0x4);
 344         }
 345         return 1;               /* All went well - we hope! */
 346 }
 347
 348 static int imm_byte_in(unsigned short base, char *buffer, int len)
 349 {
 350         int i;
 351
 352         /*
 353          * The following is based on documented timing signals
 354          */
 355         w_ctr(base, 0x4);
 356         for (i = len; i; i--) {
 357                 w_ctr(base, 0x26);
 358                 *buffer++ = r_dtr(base);
 359                 w_ctr(base, 0x25);
 360         }
 361         return 1;               /* All went well - we hope! */
 362 }
 363
 364 static int imm_out(imm_struct *dev, char *buffer, int len)
 365 {
 366         unsigned short ppb = dev->base;
 367         int r = imm_wait(dev);
 368
 369         /*
 370          * Make sure that:
 371          * a) the SCSI bus is BUSY (device still listening)
 372          * b) the device is listening
 373          */
 374         if ((r & 0x18) != 0x08) {
 375                 imm_fail(dev, DID_ERROR);
 376                 printk("IMM: returned SCSI status %2x\n", r);
 377                 return 0;
 378         }
 379         switch (dev->mode) {
 380         case IMM_EPP_32:
 381         case IMM_EPP_16:
 382         case IMM_EPP_8:
 383                 epp_reset(ppb);
 384                 w_ctr(ppb, 0x4);
 385 #ifdef CONFIG_SCSI_IZIP_EPP16
 386                 if (!(((long) buffer | len) & 0x01))
 387                         outsw(ppb + 4, buffer, len >> 1);
 388 #else
 389                 if (!(((long) buffer | len) & 0x03))
 390                         outsl(ppb + 4, buffer, len >> 2);
 391 #endif
 392                 else
 393                         outsb(ppb + 4, buffer, len);
 394                 w_ctr(ppb, 0xc);
 395                 r = !(r_str(ppb) & 0x01);
 396                 w_ctr(ppb, 0xc);
 397                 ecp_sync(dev);
 398                 break;
 399
 400         case IMM_NIBBLE:
 401         case IMM_PS2:
 402                 /* 8 bit output, with a loop */
 403                 r = imm_byte_out(ppb, buffer, len);
 404                 break;
 405
 406         default:
 407                 printk("IMM: bug in imm_out()\n");
 408                 r = 0;
 409         }
 410         return r;
 411 }
 412
 413 static int imm_in(imm_struct *dev, char *buffer, int len)
 414 {
 415         unsigned short ppb = dev->base;
 416         int r = imm_wait(dev);
 417
 418         /*
 419          * Make sure that:
 420          * a) the SCSI bus is BUSY (device still listening)
 421          * b) the device is sending data
 422          */
 423         if ((r & 0x18) != 0x18) {
 424                 imm_fail(dev, DID_ERROR);
 425                 return 0;
 426         }
 427         switch (dev->mode) {
 428         case IMM_NIBBLE:
 429                 /* 4 bit input, with a loop */
 430                 r = imm_nibble_in(ppb, buffer, len);
 431                 w_ctr(ppb, 0xc);
 432                 break;
 433
 434         case IMM_PS2:
 435                 /* 8 bit input, with a loop */
 436                 r = imm_byte_in(ppb, buffer, len);
 437                 w_ctr(ppb, 0xc);
 438                 break;
 439
 440         case IMM_EPP_32:
 441         case IMM_EPP_16:
 442         case IMM_EPP_8:
 443                 epp_reset(ppb);
 444                 w_ctr(ppb, 0x24);
 445 #ifdef CONFIG_SCSI_IZIP_EPP16
 446                 if (!(((long) buffer | len) & 0x01))
 447                         insw(ppb + 4, buffer, len >> 1);
 448 #else
 449                 if (!(((long) buffer | len) & 0x03))
 450                         insl(ppb + 4, buffer, len >> 2);
 451 #endif
 452                 else
 453                         insb(ppb + 4, buffer, len);
 454                 w_ctr(ppb, 0x2c);
 455                 r = !(r_str(ppb) & 0x01);
 456                 w_ctr(ppb, 0x2c);
 457                 ecp_sync(dev);
 458                 break;
 459
 460         default:
 461                 printk("IMM: bug in imm_ins()\n");
 462                 r = 0;
 463                 break;
 464         }
 465         return r;
 466 }
 467
 468 static int imm_cpp(unsigned short ppb, unsigned char b)
 469 {
 470         /*
 471          * Comments on udelay values refer to the
 472          * Command Packet Protocol (CPP) timing diagram.
 473          */
 474
 475         unsigned char s1, s2, s3;
 476         w_ctr(ppb, 0x0c);
 477         udelay(2);              /* 1 usec - infinite */
 478         w_dtr(ppb, 0xaa);
 479         udelay(10);             /* 7 usec - infinite */
 480         w_dtr(ppb, 0x55);
 481         udelay(10);             /* 7 usec - infinite */
 482         w_dtr(ppb, 0x00);
 483         udelay(10);             /* 7 usec - infinite */
 484         w_dtr(ppb, 0xff);
 485         udelay(10);             /* 7 usec - infinite */
 486         s1 = r_str(ppb) & 0xb8;
 487         w_dtr(ppb, 0x87);
 488         udelay(10);             /* 7 usec - infinite */
 489         s2 = r_str(ppb) & 0xb8;
 490         w_dtr(ppb, 0x78);
 491         udelay(10);             /* 7 usec - infinite */
 492         s3 = r_str(ppb) & 0x38;
 493         /*
 494          * Values for b are:
 495          * 0000 00aa    Assign address aa to current device
 496          * 0010 00aa    Select device aa in EPP Winbond mode
 497          * 0010 10aa    Select device aa in EPP mode
 498          * 0011 xxxx    Deselect all devices
 499          * 0110 00aa    Test device aa
 500          * 1101 00aa    Select device aa in ECP mode
 501          * 1110 00aa    Select device aa in Compatible mode
 502          */
 503         w_dtr(ppb, b);
 504         udelay(2);              /* 1 usec - infinite */
 505         w_ctr(ppb, 0x0c);
 506         udelay(10);             /* 7 usec - infinite */
 507         w_ctr(ppb, 0x0d);
 508         udelay(2);              /* 1 usec - infinite */
 509         w_ctr(ppb, 0x0c);
 510         udelay(10);             /* 7 usec - infinite */
 511         w_dtr(ppb, 0xff);
 512         udelay(10);             /* 7 usec - infinite */
 513
 514         /*
 515          * The following table is electrical pin values.
 516          * (BSY is inverted at the CTR register)
 517          *
 518          *       BSY  ACK  POut SEL  Fault
 519          * S1    0    X    1    1    1
 520          * S2    1    X    0    1    1
 521          * S3    L    X    1    1    S
 522          *
 523          * L => Last device in chain
 524          * S => Selected
 525          *
 526          * Observered values for S1,S2,S3 are:
 527          * Disconnect => f8/58/78
 528          * Connect    => f8/58/70
 529          */
 530         if ((s1 == 0xb8) && (s2 == 0x18) && (s3 == 0x30))
 531                 return 1;       /* Connected */
 532         if ((s1 == 0xb8) && (s2 == 0x18) && (s3 == 0x38))
 533                 return 0;       /* Disconnected */
 534
 535         return -1;              /* No device present */
 536 }
 537
 538 static inline int imm_connect(imm_struct *dev, int flag)
 539 {
 540         unsigned short ppb = dev->base;
 541
 542         imm_cpp(ppb, 0xe0);     /* Select device 0 in compatible mode */
 543         imm_cpp(ppb, 0x30);     /* Disconnect all devices */
 544
 545         if ((dev->mode == IMM_EPP_8) ||
 546             (dev->mode == IMM_EPP_16) ||
 547             (dev->mode == IMM_EPP_32))
 548                 return imm_cpp(ppb, 0x28);      /* Select device 0 in EPP mode */
 549         return imm_cpp(ppb, 0xe0);      /* Select device 0 in compatible mode */
 550 }
 551
 552 static void imm_disconnect(imm_struct *dev)
 553 {
 554         imm_cpp(dev->base, 0x30);       /* Disconnect all devices */
 555 }
 556
 557 static int imm_select(imm_struct *dev, int target)
 558 {
 559         int k;
 560         unsigned short ppb = dev->base;
 561
 562         /*
 563          * Firstly we want to make sure there is nothing
 564          * holding onto the SCSI bus.
 565          */
 566         w_ctr(ppb, 0xc);
 567
 568         k = IMM_SELECT_TMO;
 569         do {
 570                 k--;
 571         } while ((r_str(ppb) & 0x08) && (k));
 572
 573         if (!k)
 574                 return 0;
 575
 576         /*
 577          * Now assert the SCSI ID (HOST and TARGET) on the data bus
 578          */
 579         w_ctr(ppb, 0x4);
 580         w_dtr(ppb, 0x80 | (1 << target));
 581         udelay(1);
 582
 583         /*
 584          * Deassert SELIN first followed by STROBE
 585          */
 586         w_ctr(ppb, 0xc);
 587         w_ctr(ppb, 0xd);
 588
 589         /*
 590          * ACK should drop low while SELIN is deasserted.
 591          * FAULT should drop low when the SCSI device latches the bus.
 592          */
 593         k = IMM_SELECT_TMO;
 594         do {
 595                 k--;
 596         }
 597         while (!(r_str(ppb) & 0x08) && (k));
 598
 599         /*
 600          * Place the interface back into a sane state (status mode)
 601          */
 602         w_ctr(ppb, 0xc);
 603         return (k) ? 1 : 0;
 604 }
 605
 606 static int imm_init(imm_struct *dev)
 607 {
 608         if (imm_connect(dev, 0) != 1)
 609                 return -EIO;
 610         imm_reset_pulse(dev->base);
 611         mdelay(1);      /* Delay to allow devices to settle */
 612         imm_disconnect(dev);
 613         mdelay(1);      /* Another delay to allow devices to settle */
 614         return device_check(dev);
 615 }
 616
 617 static inline int imm_send_command(struct scsi_cmnd *cmd)
 618 {
 619         imm_struct *dev = imm_dev(cmd->device->host);
 620         int k;
 621
 622         /* NOTE: IMM uses byte pairs */
 623         for (k = 0; k < cmd->cmd_len; k += 2)
 624                 if (!imm_out(dev, &cmd->cmnd[k], 2))
 625                         return 0;
 626         return 1;
 627 }
 628
 629 /*
 630  * The bulk flag enables some optimisations in the data transfer loops,
 631  * it should be true for any command that transfers data in integral
 632  * numbers of sectors.
 633  *
 634  * The driver appears to remain stable if we speed up the parallel port
 635  * i/o in this function, but not elsewhere.
 636  */
 637 static int imm_completion(struct scsi_cmnd *cmd)
 638 {
 639         /* Return codes:
 640          * -1     Error
 641          *  0     Told to schedule
 642          *  1     Finished data transfer
 643          */
 644         imm_struct *dev = imm_dev(cmd->device->host);
 645         unsigned short ppb = dev->base;
 646         unsigned long start_jiffies = jiffies;
 647
 648         unsigned char r, v;
 649         int fast, bulk, status;
 650
 651         v = cmd->cmnd[0];
 652         bulk = ((v == READ_6) ||
 653                 (v == READ_10) || (v == WRITE_6) || (v == WRITE_10));
 654
 655         /*
 656          * We only get here if the drive is ready to comunicate,
 657          * hence no need for a full imm_wait.
 658          */
 659         w_ctr(ppb, 0x0c);
 660         r = (r_str(ppb) & 0xb8);
 661
 662         /*
 663          * while (device is not ready to send status byte)
 664          *     loop;
 665          */
 666         while (r != (unsigned char) 0xb8) {
 667                 /*
 668                  * If we have been running for more than a full timer tick
 669                  * then take a rest.
 670                  */
 671                 if (time_after(jiffies, start_jiffies + 1))
 672                         return 0;
 673
 674                 /*
 675                  * FAIL if:
 676                  * a) Drive status is screwy (!ready && !present)
 677                  * b) Drive is requesting/sending more data than expected
 678                  */
 679                 if (((r & 0x88) != 0x88) || (cmd->SCp.this_residual <= 0)) {
 680                         imm_fail(dev, DID_ERROR);
 681                         return -1;      /* ERROR_RETURN */
 682                 }
 683                 /* determine if we should use burst I/O */
 684                 if (dev->rd == 0) {
 685                         fast = (bulk
 686                                 && (cmd->SCp.this_residual >=
 687                                     IMM_BURST_SIZE)) ? IMM_BURST_SIZE : 2;
 688                         status = imm_out(dev, cmd->SCp.ptr, fast);
 689                 } else {
 690                         fast = (bulk
 691                                 && (cmd->SCp.this_residual >=
 692                                     IMM_BURST_SIZE)) ? IMM_BURST_SIZE : 1;
 693                         status = imm_in(dev, cmd->SCp.ptr, fast);
 694                 }
 695
 696                 cmd->SCp.ptr += fast;
 697                 cmd->SCp.this_residual -= fast;
 698
 699                 if (!status) {
 700                         imm_fail(dev, DID_BUS_BUSY);
 701                         return -1;      /* ERROR_RETURN */
 702                 }
 703                 if (cmd->SCp.buffer && !cmd->SCp.this_residual) {
 704                         /* if scatter/gather, advance to the next segment */
 705                         if (cmd->SCp.buffers_residual--) {
 706                                 cmd->SCp.buffer++;
 707                                 cmd->SCp.this_residual =
 708                                     cmd->SCp.buffer->length;
 709                                 cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
 710
 711                                 /*
 712                                  * Make sure that we transfer even number of bytes
 713                                  * otherwise it makes imm_byte_out() messy.
 714                                  */
 715                                 if (cmd->SCp.this_residual & 0x01)
 716                                         cmd->SCp.this_residual++;
 717                         }
 718                 }
 719                 /* Now check to see if the drive is ready to comunicate */
 720                 w_ctr(ppb, 0x0c);
 721                 r = (r_str(ppb) & 0xb8);
 722
 723                 /* If not, drop back down to the scheduler and wait a timer tick */
 724                 if (!(r & 0x80))
 725                         return 0;
 726         }
 727         return 1;               /* FINISH_RETURN */
 728 }
 729
 730 /*
 731  * Since the IMM itself doesn't generate interrupts, we use
 732  * the scheduler's task queue to generate a stream of call-backs and
 733  * complete the request when the drive is ready.
 734  */
 735 static void imm_interrupt(struct work_struct *work)
 736 {
 737         imm_struct *dev = container_of(work, imm_struct, imm_tq.work);
 738         struct scsi_cmnd *cmd = dev->cur_cmd;
 739         struct Scsi_Host *host = cmd->device->host;
 740         unsigned long flags;
 741
 742         if (imm_engine(dev, cmd)) {
 743                 schedule_delayed_work(&dev->imm_tq, 1);
 744                 return;
 745         }
 746         /* Command must of completed hence it is safe to let go... */
 747 #if IMM_DEBUG > 0
 748         switch ((cmd->result >> 16) & 0xff) {
 749         case DID_OK:
 750                 break;
 751         case DID_NO_CONNECT:
 752                 printk("imm: no device at SCSI ID %i\n", cmd->device->id);
 753                 break;
 754         case DID_BUS_BUSY:
 755                 printk("imm: BUS BUSY - EPP timeout detected\n");
 756                 break;
 757         case DID_TIME_OUT:
 758                 printk("imm: unknown timeout\n");
 759                 break;
 760         case DID_ABORT:
 761                 printk("imm: told to abort\n");
 762                 break;
 763         case DID_PARITY:
 764                 printk("imm: parity error (???)\n");
 765                 break;
 766         case DID_ERROR:
 767                 printk("imm: internal driver error\n");
 768                 break;
 769         case DID_RESET:
 770                 printk("imm: told to reset device\n");
 771                 break;
 772         case DID_BAD_INTR:
 773                 printk("imm: bad interrupt (???)\n");
 774                 break;
 775         default:
 776                 printk("imm: bad return code (%02x)\n",
 777                        (cmd->result >> 16) & 0xff);
 778         }
 779 #endif
 780
 781         if (cmd->SCp.phase > 1)
 782                 imm_disconnect(dev);
 783
 784         imm_pb_dismiss(dev);
 785
 786         spin_lock_irqsave(host->host_lock, flags);
 787         dev->cur_cmd = NULL;
 788         cmd->scsi_done(cmd);
 789         spin_unlock_irqrestore(host->host_lock, flags);
 790         return;
 791 }
 792
 793 static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
 794 {
 795         unsigned short ppb = dev->base;
 796         unsigned char l = 0, h = 0;
 797         int retv, x;
 798
 799         /* First check for any errors that may have occurred
 800          * Here we check for internal errors
 801          */
 802         if (dev->failed)
 803                 return 0;
 804
 805         switch (cmd->SCp.phase) {
 806         case 0:         /* Phase 0 - Waiting for parport */
 807                 if (time_after(jiffies, dev->jstart + HZ)) {
 808                         /*
 809                          * We waited more than a second
 810                          * for parport to call us
 811                          */
 812                         imm_fail(dev, DID_BUS_BUSY);
 813                         return 0;
 814                 }
 815                 return 1;       /* wait until imm_wakeup claims parport */
 816                 /* Phase 1 - Connected */
 817         case 1:
 818                 imm_connect(dev, CONNECT_EPP_MAYBE);
 819                 cmd->SCp.phase++;
 820
 821                 /* Phase 2 - We are now talking to the scsi bus */
 822         case 2:
 823                 if (!imm_select(dev, scmd_id(cmd))) {
 824                         imm_fail(dev, DID_NO_CONNECT);
 825                         return 0;
 826                 }
 827                 cmd->SCp.phase++;
 828
 829                 /* Phase 3 - Ready to accept a command */
 830         case 3:
 831                 w_ctr(ppb, 0x0c);
 832                 if (!(r_str(ppb) & 0x80))
 833                         return 1;
 834
 835                 if (!imm_send_command(cmd))
 836                         return 0;
 837                 cmd->SCp.phase++;
 838
 839                 /* Phase 4 - Setup scatter/gather buffers */
 840         case 4:
 841                 if (scsi_bufflen(cmd)) {
 842                         cmd->SCp.buffer = scsi_sglist(cmd);
 843                         cmd->SCp.this_residual = cmd->SCp.buffer->length;
 844                         cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
 845                 } else {
 846                         cmd->SCp.buffer = NULL;
 847                         cmd->SCp.this_residual = 0;
 848                         cmd->SCp.ptr = NULL;
 849                 }
 850                 cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1;
 851                 cmd->SCp.phase++;
 852                 if (cmd->SCp.this_residual & 0x01)
 853                         cmd->SCp.this_residual++;
 854                 /* Phase 5 - Pre-Data transfer stage */
 855         case 5:
 856                 /* Spin lock for BUSY */
 857                 w_ctr(ppb, 0x0c);
 858                 if (!(r_str(ppb) & 0x80))
 859                         return 1;
 860
 861                 /* Require negotiation for read requests */
 862                 x = (r_str(ppb) & 0xb8);
 863                 dev->rd = (x & 0x10) ? 1 : 0;
 864                 dev->dp = (x & 0x20) ? 0 : 1;
 865
 866                 if ((dev->dp) && (dev->rd))
 867                         if (imm_negotiate(dev))
 868                                 return 0;
 869                 cmd->SCp.phase++;
 870
 871                 /* Phase 6 - Data transfer stage */
 872         case 6:
 873                 /* Spin lock for BUSY */
 874                 w_ctr(ppb, 0x0c);
 875                 if (!(r_str(ppb) & 0x80))
 876                         return 1;
 877
 878                 if (dev->dp) {
 879                         retv = imm_completion(cmd);
 880                         if (retv == -1)
 881                                 return 0;
 882                         if (retv == 0)
 883                                 return 1;
 884                 }
 885                 cmd->SCp.phase++;
 886
 887                 /* Phase 7 - Post data transfer stage */
 888         case 7:
 889                 if ((dev->dp) && (dev->rd)) {
 890                         if ((dev->mode == IMM_NIBBLE) || (dev->mode == IMM_PS2)) {
 891                                 w_ctr(ppb, 0x4);
 892                                 w_ctr(ppb, 0xc);
 893                                 w_ctr(ppb, 0xe);
 894                                 w_ctr(ppb, 0x4);
 895                         }
 896                 }
 897                 cmd->SCp.phase++;
 898
 899                 /* Phase 8 - Read status/message */
 900         case 8:
 901                 /* Check for data overrun */
 902                 if (imm_wait(dev) != (unsigned char) 0xb8) {
 903                         imm_fail(dev, DID_ERROR);
 904                         return 0;
 905                 }
 906                 if (imm_negotiate(dev))
 907                         return 0;
 908                 if (imm_in(dev, &l, 1)) {       /* read status byte */
 909                         /* Check for optional message byte */
 910                         if (imm_wait(dev) == (unsigned char) 0xb8)
 911                                 imm_in(dev, &h, 1);
 912                         cmd->result = (DID_OK << 16) + (l & STATUS_MASK);
 913                 }
 914                 if ((dev->mode == IMM_NIBBLE) || (dev->mode == IMM_PS2)) {
 915                         w_ctr(ppb, 0x4);
 916                         w_ctr(ppb, 0xc);
 917                         w_ctr(ppb, 0xe);
 918                         w_ctr(ppb, 0x4);
 919                 }
 920                 return 0;       /* Finished */
 921                 break;
 922
 923         default:
 924                 printk("imm: Invalid scsi phase\n");
 925         }
 926         return 0;
 927 }
 928
 929 static int imm_queuecommand_lck(struct scsi_cmnd *cmd,
 930                 void (*done)(struct scsi_cmnd *))
 931 {
 932         imm_struct *dev = imm_dev(cmd->device->host);
 933
 934         if (dev->cur_cmd) {
 935                 printk("IMM: bug in imm_queuecommand\n");
 936                 return 0;
 937         }
 938         dev->failed = 0;
 939         dev->jstart = jiffies;
 940         dev->cur_cmd = cmd;
 941         cmd->scsi_done = done;
 942         cmd->result = DID_ERROR << 16;  /* default return code */
 943         cmd->SCp.phase = 0;     /* bus free */
 944
 945         schedule_delayed_work(&dev->imm_tq, 0);
 946
 947         imm_pb_claim(dev);
 948
 949         return 0;
 950 }
 951
 952 static DEF_SCSI_QCMD(imm_queuecommand)
 953
 954 /*
 955  * Apparently the disk->capacity attribute is off by 1 sector
 956  * for all disk drives.  We add the one here, but it should really
 957  * be done in sd.c.  Even if it gets fixed there, this will still
 958  * work.
 959  */
 960 static int imm_biosparam(struct scsi_device *sdev, struct block_device *dev,
 961                          sector_t capacity, int ip[])
 962 {
 963         ip[0] = 0x40;
 964         ip[1] = 0x20;
 965         ip[2] = ((unsigned long) capacity + 1) / (ip[0] * ip[1]);
 966         if (ip[2] > 1024) {
 967                 ip[0] = 0xff;
 968                 ip[1] = 0x3f;
 969                 ip[2] = ((unsigned long) capacity + 1) / (ip[0] * ip[1]);
 970         }
 971         return 0;
 972 }
 973
 974 static int imm_abort(struct scsi_cmnd *cmd)
 975 {
 976         imm_struct *dev = imm_dev(cmd->device->host);
 977         /*
 978          * There is no method for aborting commands since Iomega
 979          * have tied the SCSI_MESSAGE line high in the interface
 980          */
 981
 982         switch (cmd->SCp.phase) {
 983         case 0:         /* Do not have access to parport */
 984         case 1:         /* Have not connected to interface */
 985                 dev->cur_cmd = NULL;    /* Forget the problem */
 986                 return SUCCESS;
 987                 break;
 988         default:                /* SCSI command sent, can not abort */
 989                 return FAILED;
 990                 break;
 991         }
 992 }
 993
 994 static void imm_reset_pulse(unsigned int base)
 995 {
 996         w_ctr(base, 0x04);
 997         w_dtr(base, 0x40);
 998         udelay(1);
 999         w_ctr(base, 0x0c);
1000         w_ctr(base, 0x0d);
1001         udelay(50);
1002         w_ctr(base, 0x0c);
1003         w_ctr(base, 0x04);
1004 }
1005
1006 static int imm_reset(struct scsi_cmnd *cmd)
1007 {
1008         imm_struct *dev = imm_dev(cmd->device->host);
1009
1010         if (cmd->SCp.phase)
1011                 imm_disconnect(dev);
1012         dev->cur_cmd = NULL;    /* Forget the problem */
1013
1014         imm_connect(dev, CONNECT_NORMAL);
1015         imm_reset_pulse(dev->base);
1016         mdelay(1);              /* device settle delay */
1017         imm_disconnect(dev);
1018         mdelay(1);              /* device settle delay */
1019         return SUCCESS;
1020 }
1021
1022 static int device_check(imm_struct *dev)
1023 {
1024         /* This routine looks for a device and then attempts to use EPP
1025            to send a command. If all goes as planned then EPP is available. */
1026
1027         static char cmd[6] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
1028         int loop, old_mode, status, k, ppb = dev->base;
1029         unsigned char l;
1030
1031         old_mode = dev->mode;
1032         for (loop = 0; loop < 8; loop++) {
1033                 /* Attempt to use EPP for Test Unit Ready */
1034                 if ((ppb & 0x0007) == 0x0000)
1035                         dev->mode = IMM_EPP_32;
1036
1037               second_pass:
1038                 imm_connect(dev, CONNECT_EPP_MAYBE);
1039                 /* Select SCSI device */
1040                 if (!imm_select(dev, loop)) {
1041                         imm_disconnect(dev);
1042                         continue;
1043                 }
1044                 printk("imm: Found device at ID %i, Attempting to use %s\n",
1045                        loop, IMM_MODE_STRING[dev->mode]);
1046
1047                 /* Send SCSI command */
1048                 status = 1;
1049                 w_ctr(ppb, 0x0c);
1050                 for (l = 0; (l < 3) && (status); l++)
1051                         status = imm_out(dev, &cmd[l << 1], 2);
1052
1053                 if (!status) {
1054                         imm_disconnect(dev);
1055                         imm_connect(dev, CONNECT_EPP_MAYBE);
1056                         imm_reset_pulse(dev->base);
1057                         udelay(1000);
1058                         imm_disconnect(dev);
1059                         udelay(1000);
1060                         if (dev->mode == IMM_EPP_32) {
1061                                 dev->mode = old_mode;
1062                                 goto second_pass;
1063                         }
1064                         printk("imm: Unable to establish communication\n");
1065                         return -EIO;
1066                 }
1067                 w_ctr(ppb, 0x0c);
1068
1069                 k = 1000000;    /* 1 Second */
1070                 do {
1071                         l = r_str(ppb);
1072                         k--;
1073                         udelay(1);
1074                 } while (!(l & 0x80) && (k));
1075
1076                 l &= 0xb8;
1077
1078                 if (l != 0xb8) {
1079                         imm_disconnect(dev);
1080                         imm_connect(dev, CONNECT_EPP_MAYBE);
1081                         imm_reset_pulse(dev->base);
1082                         udelay(1000);
1083                         imm_disconnect(dev);
1084                         udelay(1000);
1085                         if (dev->mode == IMM_EPP_32) {
1086                                 dev->mode = old_mode;
1087                                 goto second_pass;
1088                         }
1089                         printk
1090                             ("imm: Unable to establish communication\n");
1091                         return -EIO;
1092                 }
1093                 imm_disconnect(dev);
1094                 printk
1095                     ("imm: Communication established at 0x%x with ID %i using %s\n",
1096                      ppb, loop, IMM_MODE_STRING[dev->mode]);
1097                 imm_connect(dev, CONNECT_EPP_MAYBE);
1098                 imm_reset_pulse(dev->base);
1099                 udelay(1000);
1100                 imm_disconnect(dev);
1101                 udelay(1000);
1102                 return 0;
1103         }
1104         printk("imm: No devices found\n");
1105         return -ENODEV;
1106 }
1107
1108 /*
1109  * imm cannot deal with highmem, so this causes all IO pages for this host
1110  * to reside in low memory (hence mapped)
1111  */
1112 static int imm_adjust_queue(struct scsi_device *device)
1113 {
1114         blk_queue_bounce_limit(device->request_queue, BLK_BOUNCE_HIGH);
1115         return 0;
1116 }
1117
1118 static struct scsi_host_template imm_template = {
1119         .module                 = THIS_MODULE,
1120         .proc_name              = "imm",
1121         .proc_info              = imm_proc_info,
1122         .name                   = "Iomega VPI2 (imm) interface",
1123         .queuecommand           = imm_queuecommand,
1124         .eh_abort_handler       = imm_abort,
1125         .eh_bus_reset_handler   = imm_reset,
1126         .eh_host_reset_handler  = imm_reset,
1127         .bios_param             = imm_biosparam,
1128         .this_id                = 7,
1129         .sg_tablesize           = SG_ALL,
1130         .cmd_per_lun            = 1,
1131         .use_clustering         = ENABLE_CLUSTERING,
1132         .can_queue              = 1,
1133         .slave_alloc            = imm_adjust_queue,
1134 };
1135
1136 /***************************************************************************
1137  *                   Parallel port probing routines                        *
1138  ***************************************************************************/
1139
1140 static LIST_HEAD(imm_hosts);
1141
1142 static int __imm_attach(struct parport *pb)
1143 {
1144         struct Scsi_Host *host;
1145         imm_struct *dev;
1146         DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waiting);
1147         DEFINE_WAIT(wait);
1148         int ports;
1149         int modes, ppb;
1150         int err = -ENOMEM;
1151
1152         init_waitqueue_head(&waiting);
1153
1154         dev = kzalloc(sizeof(imm_struct), GFP_KERNEL);
1155         if (!dev)
1156                 return -ENOMEM;
1157
1158
1159         dev->base = -1;
1160         dev->mode = IMM_AUTODETECT;
1161         INIT_LIST_HEAD(&dev->list);
1162
1163         dev->dev = parport_register_device(pb, "imm", NULL, imm_wakeup,
1164                                                 NULL, 0, dev);
1165
1166         if (!dev->dev)
1167                 goto out;
1168
1169
1170         /* Claim the bus so it remembers what we do to the control
1171          * registers. [ CTR and ECP ]
1172          */
1173         err = -EBUSY;
1174         dev->waiting = &waiting;
1175         prepare_to_wait(&waiting, &wait, TASK_UNINTERRUPTIBLE);
1176         if (imm_pb_claim(dev))
1177                 schedule_timeout(3 * HZ);
1178         if (dev->wanted) {
1179                 printk(KERN_ERR "imm%d: failed to claim parport because "
1180                         "a pardevice is owning the port for too long "
1181                         "time!\n", pb->number);
1182                 imm_pb_dismiss(dev);
1183                 dev->waiting = NULL;
1184                 finish_wait(&waiting, &wait);
1185                 goto out1;
1186         }
1187         dev->waiting = NULL;
1188         finish_wait(&waiting, &wait);
1189         ppb = dev->base = dev->dev->port->base;
1190         dev->base_hi = dev->dev->port->base_hi;
1191         w_ctr(ppb, 0x0c);
1192         modes = dev->dev->port->modes;
1193
1194         /* Mode detection works up the chain of speed
1195          * This avoids a nasty if-then-else-if-... tree
1196          */
1197         dev->mode = IMM_NIBBLE;
1198
1199         if (modes & PARPORT_MODE_TRISTATE)
1200                 dev->mode = IMM_PS2;
1201
1202         /* Done configuration */
1203
1204         err = imm_init(dev);
1205
1206         imm_pb_release(dev);
1207
1208         if (err)
1209                 goto out1;
1210
1211         /* now the glue ... */
1212         if (dev->mode == IMM_NIBBLE || dev->mode == IMM_PS2)
1213                 ports = 3;
1214         else
1215                 ports = 8;
1216
1217         INIT_DELAYED_WORK(&dev->imm_tq, imm_interrupt);
1218
1219         err = -ENOMEM;
1220         host = scsi_host_alloc(&imm_template, sizeof(imm_struct *));
1221         if (!host)
1222                 goto out1;
1223         host->io_port = pb->base;
1224         host->n_io_port = ports;
1225         host->dma_channel = -1;
1226         host->unique_id = pb->number;
1227         *(imm_struct **)&host->hostdata = dev;
1228         dev->host = host;
1229         list_add_tail(&dev->list, &imm_hosts);
1230         err = scsi_add_host(host, NULL);
1231         if (err)
1232                 goto out2;
1233         scsi_scan_host(host);
1234         return 0;
1235
1236 out2:
1237         list_del_init(&dev->list);
1238         scsi_host_put(host);
1239 out1:
1240         parport_unregister_device(dev->dev);
1241 out:
1242         kfree(dev);
1243         return err;
1244 }
1245
1246 static void imm_attach(struct parport *pb)
1247 {
1248         __imm_attach(pb);
1249 }
1250
1251 static void imm_detach(struct parport *pb)
1252 {
1253         imm_struct *dev;
1254         list_for_each_entry(dev, &imm_hosts, list) {
1255                 if (dev->dev->port == pb) {
1256                         list_del_init(&dev->list);
1257                         scsi_remove_host(dev->host);
1258                         scsi_host_put(dev->host);
1259                         parport_unregister_device(dev->dev);
1260                         kfree(dev);
1261                         break;
1262                 }
1263         }
1264 }
1265
1266 static struct parport_driver imm_driver = {
1267         .name   = "imm",
1268         .attach = imm_attach,
1269         .detach = imm_detach,
1270 };
1271
1272 static int __init imm_driver_init(void)
1273 {
1274         printk("imm: Version %s\n", IMM_VERSION);
1275         return parport_register_driver(&imm_driver);
1276 }
1277
1278 static void __exit imm_driver_exit(void)
1279 {
1280         parport_unregister_driver(&imm_driver);
1281 }
1282
1283 module_init(imm_driver_init);
1284 module_exit(imm_driver_exit);
1285
1286 MODULE_LICENSE("GPL");