gro: Allow tunnel stacking in the case of FOU/GUE
[linux/fpc-iii.git] / drivers / clocksource / mips-gic-timer.c
blobb81ed1a5342d90ca7481dd48c0bf928da5bcc6e7
1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
6 * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
7 */
8 #include <linux/clk.h>
9 #include <linux/clockchips.h>
10 #include <linux/cpu.h>
11 #include <linux/init.h>
12 #include <linux/interrupt.h>
13 #include <linux/irqchip/mips-gic.h>
14 #include <linux/notifier.h>
15 #include <linux/of_irq.h>
16 #include <linux/percpu.h>
17 #include <linux/smp.h>
18 #include <linux/time.h>
20 static DEFINE_PER_CPU(struct clock_event_device, gic_clockevent_device);
21 static int gic_timer_irq;
22 static unsigned int gic_frequency;
24 static int gic_next_event(unsigned long delta, struct clock_event_device *evt)
26 u64 cnt;
27 int res;
29 cnt = gic_read_count();
30 cnt += (u64)delta;
31 gic_write_cpu_compare(cnt, cpumask_first(evt->cpumask));
32 res = ((int)(gic_read_count() - cnt) >= 0) ? -ETIME : 0;
33 return res;
36 static void gic_set_clock_mode(enum clock_event_mode mode,
37 struct clock_event_device *evt)
39 /* Nothing to do ... */
42 static irqreturn_t gic_compare_interrupt(int irq, void *dev_id)
44 struct clock_event_device *cd = dev_id;
46 gic_write_compare(gic_read_compare());
47 cd->event_handler(cd);
48 return IRQ_HANDLED;
51 struct irqaction gic_compare_irqaction = {
52 .handler = gic_compare_interrupt,
53 .percpu_dev_id = &gic_clockevent_device,
54 .flags = IRQF_PERCPU | IRQF_TIMER,
55 .name = "timer",
58 static void gic_clockevent_cpu_init(struct clock_event_device *cd)
60 unsigned int cpu = smp_processor_id();
62 cd->name = "MIPS GIC";
63 cd->features = CLOCK_EVT_FEAT_ONESHOT |
64 CLOCK_EVT_FEAT_C3STOP;
66 cd->rating = 350;
67 cd->irq = gic_timer_irq;
68 cd->cpumask = cpumask_of(cpu);
69 cd->set_next_event = gic_next_event;
70 cd->set_mode = gic_set_clock_mode;
72 clockevents_config_and_register(cd, gic_frequency, 0x300, 0x7fffffff);
74 enable_percpu_irq(gic_timer_irq, IRQ_TYPE_NONE);
77 static void gic_clockevent_cpu_exit(struct clock_event_device *cd)
79 disable_percpu_irq(gic_timer_irq);
82 static int gic_cpu_notifier(struct notifier_block *nb, unsigned long action,
83 void *data)
85 switch (action & ~CPU_TASKS_FROZEN) {
86 case CPU_STARTING:
87 gic_clockevent_cpu_init(this_cpu_ptr(&gic_clockevent_device));
88 break;
89 case CPU_DYING:
90 gic_clockevent_cpu_exit(this_cpu_ptr(&gic_clockevent_device));
91 break;
94 return NOTIFY_OK;
97 static struct notifier_block gic_cpu_nb = {
98 .notifier_call = gic_cpu_notifier,
101 static int gic_clockevent_init(void)
103 if (!cpu_has_counter || !gic_frequency)
104 return -ENXIO;
106 setup_percpu_irq(gic_timer_irq, &gic_compare_irqaction);
108 register_cpu_notifier(&gic_cpu_nb);
110 gic_clockevent_cpu_init(this_cpu_ptr(&gic_clockevent_device));
112 return 0;
115 static cycle_t gic_hpt_read(struct clocksource *cs)
117 return gic_read_count();
120 static struct clocksource gic_clocksource = {
121 .name = "GIC",
122 .read = gic_hpt_read,
123 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
126 static void __init __gic_clocksource_init(void)
128 /* Set clocksource mask. */
129 gic_clocksource.mask = CLOCKSOURCE_MASK(gic_get_count_width());
131 /* Calculate a somewhat reasonable rating value. */
132 gic_clocksource.rating = 200 + gic_frequency / 10000000;
134 clocksource_register_hz(&gic_clocksource, gic_frequency);
136 gic_clockevent_init();
138 /* And finally start the counter */
139 gic_start_count();
142 void __init gic_clocksource_init(unsigned int frequency)
144 gic_frequency = frequency;
145 gic_timer_irq = MIPS_GIC_IRQ_BASE +
146 GIC_LOCAL_TO_HWIRQ(GIC_LOCAL_INT_COMPARE);
148 __gic_clocksource_init();
151 static void __init gic_clocksource_of_init(struct device_node *node)
153 struct clk *clk;
155 if (WARN_ON(!gic_present || !node->parent ||
156 !of_device_is_compatible(node->parent, "mti,gic")))
157 return;
159 clk = of_clk_get(node, 0);
160 if (!IS_ERR(clk)) {
161 gic_frequency = clk_get_rate(clk);
162 clk_put(clk);
163 } else if (of_property_read_u32(node, "clock-frequency",
164 &gic_frequency)) {
165 pr_err("GIC frequency not specified.\n");
166 return;
168 gic_timer_irq = irq_of_parse_and_map(node, 0);
169 if (!gic_timer_irq) {
170 pr_err("GIC timer IRQ not specified.\n");
171 return;
174 __gic_clocksource_init();
176 CLOCKSOURCE_OF_DECLARE(mips_gic_timer, "mti,gic-timer",
177 gic_clocksource_of_init);