?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
gro: Allow tunnel stacking in the case of FOU/GUE
[linux/fpc-iii.git] / drivers / macintosh / adbhid.c
blob09d72bb00d12c7756b2ba8c09012f2860f91f128
1 /*
2 * drivers/macintosh/adbhid.c
3 *
4 * ADB HID driver for Power Macintosh computers.
5 *
6 * Adapted from drivers/macintosh/mac_keyb.c by Franz Sirl.
7 * drivers/macintosh/mac_keyb.c was Copyright (C) 1996 Paul Mackerras
8 * with considerable contributions from Ben Herrenschmidt and others.
9 *
10 * Copyright (C) 2000 Franz Sirl.
11 *
12 * Adapted to ADB changes and support for more devices by
13 * Benjamin Herrenschmidt. Adapted from code in MkLinux
14 * and reworked.
15 *
16 * Supported devices:
17 *
18 * - Standard 1 button mouse
19 * - All standard Apple Extended protocol (handler ID 4)
20 * - mouseman and trackman mice & trackballs
21 * - PowerBook Trackpad (default setup: enable tapping)
22 * - MicroSpeed mouse & trackball (needs testing)
23 * - CH Products Trackball Pro (needs testing)
24 * - Contour Design (Contour Mouse)
25 * - Hunter digital (NoHandsMouse)
26 * - Kensignton TurboMouse 5 (needs testing)
27 * - Mouse Systems A3 mice and trackballs <aidan@kublai.com>
28 * - MacAlly 2-buttons mouse (needs testing) <pochini@denise.shiny.it>
29 *
30 * To do:
31 *
32 * Improve Kensington support.
33 * Split mouse/kbd
34 * Move to syfs
35 */
36
37 #include <linux/module.h>
38 #include <linux/slab.h>
39 #include <linux/init.h>
40 #include <linux/notifier.h>
41 #include <linux/input.h>
42
43 #include <linux/adb.h>
44 #include <linux/cuda.h>
45 #include <linux/pmu.h>
46
47 #include <asm/machdep.h>
48 #ifdef CONFIG_PPC_PMAC
49 #include <asm/backlight.h>
50 #include <asm/pmac_feature.h>
51 #endif
52
53 MODULE_AUTHOR("Franz Sirl <Franz.Sirl-kernel@lauterbach.com>");
54
55 static int restore_capslock_events;
56 module_param(restore_capslock_events, int, 0644);
57 MODULE_PARM_DESC(restore_capslock_events,
58 "Produce keypress events for capslock on both keyup and keydown.");
59
60 #define KEYB_KEYREG 0 /* register # for key up/down data */
61 #define KEYB_LEDREG 2 /* register # for leds on ADB keyboard */
62 #define MOUSE_DATAREG 0 /* reg# for movement/button codes from mouse */
63
64 static int adb_message_handler(struct notifier_block *, unsigned long, void *);
65 static struct notifier_block adbhid_adb_notifier = {
66 .notifier_call = adb_message_handler,
67 };
68
69 /* Some special keys */
70 #define ADB_KEY_DEL 0x33
71 #define ADB_KEY_CMD 0x37
72 #define ADB_KEY_CAPSLOCK 0x39
73 #define ADB_KEY_FN 0x3f
74 #define ADB_KEY_FWDEL 0x75
75 #define ADB_KEY_POWER_OLD 0x7e
76 #define ADB_KEY_POWER 0x7f
77
78 static const u16 adb_to_linux_keycodes[128] = {
79 /* 0x00 */ KEY_A, /* 30 */
80 /* 0x01 */ KEY_S, /* 31 */
81 /* 0x02 */ KEY_D, /* 32 */
82 /* 0x03 */ KEY_F, /* 33 */
83 /* 0x04 */ KEY_H, /* 35 */
84 /* 0x05 */ KEY_G, /* 34 */
85 /* 0x06 */ KEY_Z, /* 44 */
86 /* 0x07 */ KEY_X, /* 45 */
87 /* 0x08 */ KEY_C, /* 46 */
88 /* 0x09 */ KEY_V, /* 47 */
89 /* 0x0a */ KEY_102ND, /* 86 */
90 /* 0x0b */ KEY_B, /* 48 */
91 /* 0x0c */ KEY_Q, /* 16 */
92 /* 0x0d */ KEY_W, /* 17 */
93 /* 0x0e */ KEY_E, /* 18 */
94 /* 0x0f */ KEY_R, /* 19 */
95 /* 0x10 */ KEY_Y, /* 21 */
96 /* 0x11 */ KEY_T, /* 20 */
97 /* 0x12 */ KEY_1, /* 2 */
98 /* 0x13 */ KEY_2, /* 3 */
99 /* 0x14 */ KEY_3, /* 4 */
100 /* 0x15 */ KEY_4, /* 5 */
101 /* 0x16 */ KEY_6, /* 7 */
102 /* 0x17 */ KEY_5, /* 6 */
103 /* 0x18 */ KEY_EQUAL, /* 13 */
104 /* 0x19 */ KEY_9, /* 10 */
105 /* 0x1a */ KEY_7, /* 8 */
106 /* 0x1b */ KEY_MINUS, /* 12 */
107 /* 0x1c */ KEY_8, /* 9 */
108 /* 0x1d */ KEY_0, /* 11 */
109 /* 0x1e */ KEY_RIGHTBRACE, /* 27 */
110 /* 0x1f */ KEY_O, /* 24 */
111 /* 0x20 */ KEY_U, /* 22 */
112 /* 0x21 */ KEY_LEFTBRACE, /* 26 */
113 /* 0x22 */ KEY_I, /* 23 */
114 /* 0x23 */ KEY_P, /* 25 */
115 /* 0x24 */ KEY_ENTER, /* 28 */
116 /* 0x25 */ KEY_L, /* 38 */
117 /* 0x26 */ KEY_J, /* 36 */
118 /* 0x27 */ KEY_APOSTROPHE, /* 40 */
119 /* 0x28 */ KEY_K, /* 37 */
120 /* 0x29 */ KEY_SEMICOLON, /* 39 */
121 /* 0x2a */ KEY_BACKSLASH, /* 43 */
122 /* 0x2b */ KEY_COMMA, /* 51 */
123 /* 0x2c */ KEY_SLASH, /* 53 */
124 /* 0x2d */ KEY_N, /* 49 */
125 /* 0x2e */ KEY_M, /* 50 */
126 /* 0x2f */ KEY_DOT, /* 52 */
127 /* 0x30 */ KEY_TAB, /* 15 */
128 /* 0x31 */ KEY_SPACE, /* 57 */
129 /* 0x32 */ KEY_GRAVE, /* 41 */
130 /* 0x33 */ KEY_BACKSPACE, /* 14 */
131 /* 0x34 */ KEY_KPENTER, /* 96 */
132 /* 0x35 */ KEY_ESC, /* 1 */
133 /* 0x36 */ KEY_LEFTCTRL, /* 29 */
134 /* 0x37 */ KEY_LEFTMETA, /* 125 */
135 /* 0x38 */ KEY_LEFTSHIFT, /* 42 */
136 /* 0x39 */ KEY_CAPSLOCK, /* 58 */
137 /* 0x3a */ KEY_LEFTALT, /* 56 */
138 /* 0x3b */ KEY_LEFT, /* 105 */
139 /* 0x3c */ KEY_RIGHT, /* 106 */
140 /* 0x3d */ KEY_DOWN, /* 108 */
141 /* 0x3e */ KEY_UP, /* 103 */
142 /* 0x3f */ KEY_FN, /* 0x1d0 */
143 /* 0x40 */ 0,
144 /* 0x41 */ KEY_KPDOT, /* 83 */
145 /* 0x42 */ 0,
146 /* 0x43 */ KEY_KPASTERISK, /* 55 */
147 /* 0x44 */ 0,
148 /* 0x45 */ KEY_KPPLUS, /* 78 */
149 /* 0x46 */ 0,
150 /* 0x47 */ KEY_NUMLOCK, /* 69 */
151 /* 0x48 */ 0,
152 /* 0x49 */ 0,
153 /* 0x4a */ 0,
154 /* 0x4b */ KEY_KPSLASH, /* 98 */
155 /* 0x4c */ KEY_KPENTER, /* 96 */
156 /* 0x4d */ 0,
157 /* 0x4e */ KEY_KPMINUS, /* 74 */
158 /* 0x4f */ 0,
159 /* 0x50 */ 0,
160 /* 0x51 */ KEY_KPEQUAL, /* 117 */
161 /* 0x52 */ KEY_KP0, /* 82 */
162 /* 0x53 */ KEY_KP1, /* 79 */
163 /* 0x54 */ KEY_KP2, /* 80 */
164 /* 0x55 */ KEY_KP3, /* 81 */
165 /* 0x56 */ KEY_KP4, /* 75 */
166 /* 0x57 */ KEY_KP5, /* 76 */
167 /* 0x58 */ KEY_KP6, /* 77 */
168 /* 0x59 */ KEY_KP7, /* 71 */
169 /* 0x5a */ 0,
170 /* 0x5b */ KEY_KP8, /* 72 */
171 /* 0x5c */ KEY_KP9, /* 73 */
172 /* 0x5d */ KEY_YEN, /* 124 */
173 /* 0x5e */ KEY_RO, /* 89 */
174 /* 0x5f */ KEY_KPCOMMA, /* 121 */
175 /* 0x60 */ KEY_F5, /* 63 */
176 /* 0x61 */ KEY_F6, /* 64 */
177 /* 0x62 */ KEY_F7, /* 65 */
178 /* 0x63 */ KEY_F3, /* 61 */
179 /* 0x64 */ KEY_F8, /* 66 */
180 /* 0x65 */ KEY_F9, /* 67 */
181 /* 0x66 */ KEY_HANJA, /* 123 */
182 /* 0x67 */ KEY_F11, /* 87 */
183 /* 0x68 */ KEY_HANGEUL, /* 122 */
184 /* 0x69 */ KEY_SYSRQ, /* 99 */
185 /* 0x6a */ 0,
186 /* 0x6b */ KEY_SCROLLLOCK, /* 70 */
187 /* 0x6c */ 0,
188 /* 0x6d */ KEY_F10, /* 68 */
189 /* 0x6e */ KEY_COMPOSE, /* 127 */
190 /* 0x6f */ KEY_F12, /* 88 */
191 /* 0x70 */ 0,
192 /* 0x71 */ KEY_PAUSE, /* 119 */
193 /* 0x72 */ KEY_INSERT, /* 110 */
194 /* 0x73 */ KEY_HOME, /* 102 */
195 /* 0x74 */ KEY_PAGEUP, /* 104 */
196 /* 0x75 */ KEY_DELETE, /* 111 */
197 /* 0x76 */ KEY_F4, /* 62 */
198 /* 0x77 */ KEY_END, /* 107 */
199 /* 0x78 */ KEY_F2, /* 60 */
200 /* 0x79 */ KEY_PAGEDOWN, /* 109 */
201 /* 0x7a */ KEY_F1, /* 59 */
202 /* 0x7b */ KEY_RIGHTSHIFT, /* 54 */
203 /* 0x7c */ KEY_RIGHTALT, /* 100 */
204 /* 0x7d */ KEY_RIGHTCTRL, /* 97 */
205 /* 0x7e */ KEY_RIGHTMETA, /* 126 */
206 /* 0x7f */ KEY_POWER, /* 116 */
207 };
208
209 struct adbhid {
210 struct input_dev *input;
211 int id;
212 int default_id;
213 int original_handler_id;
214 int current_handler_id;
215 int mouse_kind;
216 u16 *keycode;
217 char name[64];
218 char phys[32];
219 int flags;
220 };
221
222 #define FLAG_FN_KEY_PRESSED 0x00000001
223 #define FLAG_POWER_FROM_FN 0x00000002
224 #define FLAG_EMU_FWDEL_DOWN 0x00000004
225 #define FLAG_CAPSLOCK_TRANSLATE 0x00000008
226 #define FLAG_CAPSLOCK_DOWN 0x00000010
227 #define FLAG_CAPSLOCK_IGNORE_NEXT 0x00000020
228 #define FLAG_POWER_KEY_PRESSED 0x00000040
229
230 static struct adbhid *adbhid[16];
231
232 static void adbhid_probe(void);
233
234 static void adbhid_input_keycode(int, int, int);
235
236 static void init_trackpad(int id);
237 static void init_trackball(int id);
238 static void init_turbomouse(int id);
239 static void init_microspeed(int id);
240 static void init_ms_a3(int id);
241
242 static struct adb_ids keyboard_ids;
243 static struct adb_ids mouse_ids;
244 static struct adb_ids buttons_ids;
245
246 /* Kind of keyboard, see Apple technote 1152 */
247 #define ADB_KEYBOARD_UNKNOWN 0
248 #define ADB_KEYBOARD_ANSI 0x0100
249 #define ADB_KEYBOARD_ISO 0x0200
250 #define ADB_KEYBOARD_JIS 0x0300
251
252 /* Kind of mouse */
253 #define ADBMOUSE_STANDARD_100 0 /* Standard 100cpi mouse (handler 1) */
254 #define ADBMOUSE_STANDARD_200 1 /* Standard 200cpi mouse (handler 2) */
255 #define ADBMOUSE_EXTENDED 2 /* Apple Extended mouse (handler 4) */
256 #define ADBMOUSE_TRACKBALL 3 /* TrackBall (handler 4) */
257 #define ADBMOUSE_TRACKPAD 4 /* Apple's PowerBook trackpad (handler 4) */
258 #define ADBMOUSE_TURBOMOUSE5 5 /* Turbomouse 5 (previously req. mousehack) */
259 #define ADBMOUSE_MICROSPEED 6 /* Microspeed mouse (&trackball ?), MacPoint */
260 #define ADBMOUSE_TRACKBALLPRO 7 /* Trackball Pro (special buttons) */
261 #define ADBMOUSE_MS_A3 8 /* Mouse systems A3 trackball (handler 3) */
262 #define ADBMOUSE_MACALLY2 9 /* MacAlly 2-button mouse */
263
264 static void
265 adbhid_keyboard_input(unsigned char *data, int nb, int apoll)
266 {
267 int id = (data[0] >> 4) & 0x0f;
268
269 if (!adbhid[id]) {
270 printk(KERN_ERR "ADB HID on ID %d not yet registered, packet %#02x, %#02x, %#02x, %#02x\n",
271 id, data[0], data[1], data[2], data[3]);
272 return;
273 }
274
275 /* first check this is from register 0 */
276 if (nb != 3 || (data[0] & 3) != KEYB_KEYREG)
277 return; /* ignore it */
278 adbhid_input_keycode(id, data[1], 0);
279 if (!(data[2] == 0xff || (data[2] == 0x7f && data[1] == 0x7f)))
280 adbhid_input_keycode(id, data[2], 0);
281 }
282
283 static void
284 adbhid_input_keycode(int id, int scancode, int repeat)
285 {
286 struct adbhid *ahid = adbhid[id];
287 int keycode, up_flag, key;
288
289 keycode = scancode & 0x7f;
290 up_flag = scancode & 0x80;
291
292 if (restore_capslock_events) {
293 if (keycode == ADB_KEY_CAPSLOCK && !up_flag) {
294 /* Key pressed, turning on the CapsLock LED.
295 * The next 0xff will be interpreted as a release. */
296 if (ahid->flags & FLAG_CAPSLOCK_IGNORE_NEXT) {
297 /* Throw away this key event if it happens
298 * just after resume. */
299 ahid->flags &= ~FLAG_CAPSLOCK_IGNORE_NEXT;
300 return;
301 } else {
302 ahid->flags |= FLAG_CAPSLOCK_TRANSLATE
303 | FLAG_CAPSLOCK_DOWN;
304 }
305 } else if (scancode == 0xff &&
306 !(ahid->flags & FLAG_POWER_KEY_PRESSED)) {
307 /* Scancode 0xff usually signifies that the capslock
308 * key was either pressed or released, or that the
309 * power button was released. */
310 if (ahid->flags & FLAG_CAPSLOCK_TRANSLATE) {
311 keycode = ADB_KEY_CAPSLOCK;
312 if (ahid->flags & FLAG_CAPSLOCK_DOWN) {
313 /* Key released */
314 up_flag = 1;
315 ahid->flags &= ~FLAG_CAPSLOCK_DOWN;
316 } else {
317 /* Key pressed */
318 up_flag = 0;
319 ahid->flags &= ~FLAG_CAPSLOCK_TRANSLATE;
320 }
321 } else {
322 printk(KERN_INFO "Spurious caps lock event "
323 "(scancode 0xff).\n");
324 }
325 }
326 }
327
328 switch (keycode) {
329 case ADB_KEY_CAPSLOCK:
330 if (!restore_capslock_events) {
331 /* Generate down/up events for CapsLock every time. */
332 input_report_key(ahid->input, KEY_CAPSLOCK, 1);
333 input_sync(ahid->input);
334 input_report_key(ahid->input, KEY_CAPSLOCK, 0);
335 input_sync(ahid->input);
336 return;
337 }
338 break;
339 #ifdef CONFIG_PPC_PMAC
340 case ADB_KEY_POWER_OLD: /* Power key on PBook 3400 needs remapping */
341 switch(pmac_call_feature(PMAC_FTR_GET_MB_INFO,
342 NULL, PMAC_MB_INFO_MODEL, 0)) {
343 case PMAC_TYPE_COMET:
344 case PMAC_TYPE_HOOPER:
345 case PMAC_TYPE_KANGA:
346 keycode = ADB_KEY_POWER;
347 }
348 break;
349 case ADB_KEY_POWER:
350 /* Keep track of the power key state */
351 if (up_flag)
352 ahid->flags &= ~FLAG_POWER_KEY_PRESSED;
353 else
354 ahid->flags |= FLAG_POWER_KEY_PRESSED;
355
356 /* Fn + Command will produce a bogus "power" keycode */
357 if (ahid->flags & FLAG_FN_KEY_PRESSED) {
358 keycode = ADB_KEY_CMD;
359 if (up_flag)
360 ahid->flags &= ~FLAG_POWER_FROM_FN;
361 else
362 ahid->flags |= FLAG_POWER_FROM_FN;
363 } else if (ahid->flags & FLAG_POWER_FROM_FN) {
364 keycode = ADB_KEY_CMD;
365 ahid->flags &= ~FLAG_POWER_FROM_FN;
366 }
367 break;
368 case ADB_KEY_FN:
369 /* Keep track of the Fn key state */
370 if (up_flag) {
371 ahid->flags &= ~FLAG_FN_KEY_PRESSED;
372 /* Emulate Fn+delete = forward delete */
373 if (ahid->flags & FLAG_EMU_FWDEL_DOWN) {
374 ahid->flags &= ~FLAG_EMU_FWDEL_DOWN;
375 keycode = ADB_KEY_FWDEL;
376 break;
377 }
378 } else
379 ahid->flags |= FLAG_FN_KEY_PRESSED;
380 break;
381 case ADB_KEY_DEL:
382 /* Emulate Fn+delete = forward delete */
383 if (ahid->flags & FLAG_FN_KEY_PRESSED) {
384 keycode = ADB_KEY_FWDEL;
385 if (up_flag)
386 ahid->flags &= ~FLAG_EMU_FWDEL_DOWN;
387 else
388 ahid->flags |= FLAG_EMU_FWDEL_DOWN;
389 }
390 break;
391 #endif /* CONFIG_PPC_PMAC */
392 }
393
394 key = adbhid[id]->keycode[keycode];
395 if (key) {
396 input_report_key(adbhid[id]->input, key, !up_flag);
397 input_sync(adbhid[id]->input);
398 } else
399 printk(KERN_INFO "Unhandled ADB key (scancode %#02x) %s.\n", keycode,
400 up_flag ? "released" : "pressed");
401
402 }
403
404 static void
405 adbhid_mouse_input(unsigned char *data, int nb, int autopoll)
406 {
407 int id = (data[0] >> 4) & 0x0f;
408
409 if (!adbhid[id]) {
410 printk(KERN_ERR "ADB HID on ID %d not yet registered\n", id);
411 return;
412 }
413
414 /*
415 Handler 1 -- 100cpi original Apple mouse protocol.
416 Handler 2 -- 200cpi original Apple mouse protocol.
417
418 For Apple's standard one-button mouse protocol the data array will
419 contain the following values:
420
421 BITS COMMENTS
422 data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
423 data[1] = bxxx xxxx First button and x-axis motion.
424 data[2] = byyy yyyy Second button and y-axis motion.
425
426 Handler 4 -- Apple Extended mouse protocol.
427
428 For Apple's 3-button mouse protocol the data array will contain the
429 following values:
430
431 BITS COMMENTS
432 data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
433 data[1] = bxxx xxxx Left button and x-axis motion.
434 data[2] = byyy yyyy Second button and y-axis motion.
435 data[3] = byyy bxxx Third button and fourth button. Y is additional
436 high bits of y-axis motion. XY is additional
437 high bits of x-axis motion.
438
439 MacAlly 2-button mouse protocol.
440
441 For MacAlly 2-button mouse protocol the data array will contain the
442 following values:
443
444 BITS COMMENTS
445 data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
446 data[1] = bxxx xxxx Left button and x-axis motion.
447 data[2] = byyy yyyy Right button and y-axis motion.
448 data[3] = ???? ???? unknown
449 data[4] = ???? ???? unknown
450
451 */
452
453 /* If it's a trackpad, we alias the second button to the first.
454 NOTE: Apple sends an ADB flush command to the trackpad when
455 the first (the real) button is released. We could do
456 this here using async flush requests.
457 */
458 switch (adbhid[id]->mouse_kind)
459 {
460 case ADBMOUSE_TRACKPAD:
461 data[1] = (data[1] & 0x7f) | ((data[1] & data[2]) & 0x80);
462 data[2] = data[2] | 0x80;
463 break;
464 case ADBMOUSE_MICROSPEED:
465 data[1] = (data[1] & 0x7f) | ((data[3] & 0x01) << 7);
466 data[2] = (data[2] & 0x7f) | ((data[3] & 0x02) << 6);
467 data[3] = (data[3] & 0x77) | ((data[3] & 0x04) << 5)
468 | (data[3] & 0x08);
469 break;
470 case ADBMOUSE_TRACKBALLPRO:
471 data[1] = (data[1] & 0x7f) | (((data[3] & 0x04) << 5)
472 & ((data[3] & 0x08) << 4));
473 data[2] = (data[2] & 0x7f) | ((data[3] & 0x01) << 7);
474 data[3] = (data[3] & 0x77) | ((data[3] & 0x02) << 6);
475 break;
476 case ADBMOUSE_MS_A3:
477 data[1] = (data[1] & 0x7f) | ((data[3] & 0x01) << 7);
478 data[2] = (data[2] & 0x7f) | ((data[3] & 0x02) << 6);
479 data[3] = ((data[3] & 0x04) << 5);
480 break;
481 case ADBMOUSE_MACALLY2:
482 data[3] = (data[2] & 0x80) ? 0x80 : 0x00;
483 data[2] |= 0x80; /* Right button is mapped as button 3 */
484 nb=4;
485 break;
486 }
487
488 input_report_key(adbhid[id]->input, BTN_LEFT, !((data[1] >> 7) & 1));
489 input_report_key(adbhid[id]->input, BTN_MIDDLE, !((data[2] >> 7) & 1));
490
491 if (nb >= 4 && adbhid[id]->mouse_kind != ADBMOUSE_TRACKPAD)
492 input_report_key(adbhid[id]->input, BTN_RIGHT, !((data[3] >> 7) & 1));
493
494 input_report_rel(adbhid[id]->input, REL_X,
495 ((data[2]&0x7f) < 64 ? (data[2]&0x7f) : (data[2]&0x7f)-128 ));
496 input_report_rel(adbhid[id]->input, REL_Y,
497 ((data[1]&0x7f) < 64 ? (data[1]&0x7f) : (data[1]&0x7f)-128 ));
498
499 input_sync(adbhid[id]->input);
500 }
501
502 static void
503 adbhid_buttons_input(unsigned char *data, int nb, int autopoll)
504 {
505 int id = (data[0] >> 4) & 0x0f;
506
507 if (!adbhid[id]) {
508 printk(KERN_ERR "ADB HID on ID %d not yet registered\n", id);
509 return;
510 }
511
512 switch (adbhid[id]->original_handler_id) {
513 default:
514 case 0x02: /* Adjustable keyboard button device */
515 {
516 int down = (data[1] == (data[1] & 0xf));
517
518 switch (data[1] & 0x0f) {
519 case 0x0: /* microphone */
520 input_report_key(adbhid[id]->input, KEY_SOUND, down);
521 break;
522
523 case 0x1: /* mute */
524 input_report_key(adbhid[id]->input, KEY_MUTE, down);
525 break;
526
527 case 0x2: /* volume decrease */
528 input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down);
529 break;
530
531 case 0x3: /* volume increase */
532 input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down);
533 break;
534
535 default:
536 printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
537 data[0], data[1], data[2], data[3]);
538 break;
539 }
540 }
541 break;
542
543 case 0x1f: /* Powerbook button device */
544 {
545 int down = (data[1] == (data[1] & 0xf));
546
547 /*
548 * XXX: Where is the contrast control for the passive?
549 * -- Cort
550 */
551
552 switch (data[1] & 0x0f) {
553 case 0x8: /* mute */
554 input_report_key(adbhid[id]->input, KEY_MUTE, down);
555 break;
556
557 case 0x7: /* volume decrease */
558 input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down);
559 break;
560
561 case 0x6: /* volume increase */
562 input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down);
563 break;
564
565 case 0xb: /* eject */
566 input_report_key(adbhid[id]->input, KEY_EJECTCD, down);
567 break;
568
569 case 0xa: /* brightness decrease */
570 #ifdef CONFIG_PMAC_BACKLIGHT
571 if (down)
572 pmac_backlight_key_down();
573 #endif
574 input_report_key(adbhid[id]->input, KEY_BRIGHTNESSDOWN, down);
575 break;
576
577 case 0x9: /* brightness increase */
578 #ifdef CONFIG_PMAC_BACKLIGHT
579 if (down)
580 pmac_backlight_key_up();
581 #endif
582 input_report_key(adbhid[id]->input, KEY_BRIGHTNESSUP, down);
583 break;
584
585 case 0xc: /* videomode switch */
586 input_report_key(adbhid[id]->input, KEY_SWITCHVIDEOMODE, down);
587 break;
588
589 case 0xd: /* keyboard illumination toggle */
590 input_report_key(adbhid[id]->input, KEY_KBDILLUMTOGGLE, down);
591 break;
592
593 case 0xe: /* keyboard illumination decrease */
594 input_report_key(adbhid[id]->input, KEY_KBDILLUMDOWN, down);
595 break;
596
597 case 0xf:
598 switch (data[1]) {
599 case 0x8f:
600 case 0x0f:
601 /* keyboard illumination increase */
602 input_report_key(adbhid[id]->input, KEY_KBDILLUMUP, down);
603 break;
604
605 case 0x7f:
606 case 0xff:
607 /* keypad overlay toogle */
608 break;
609
610 default:
611 printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
612 data[0], data[1], data[2], data[3]);
613 break;
614 }
615 break;
616 default:
617 printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
618 data[0], data[1], data[2], data[3]);
619 break;
620 }
621 }
622 break;
623 }
624
625 input_sync(adbhid[id]->input);
626 }
627
628 static struct adb_request led_request;
629 static int leds_pending[16];
630 static int leds_req_pending;
631 static int pending_devs[16];
632 static int pending_led_start;
633 static int pending_led_end;
634 static DEFINE_SPINLOCK(leds_lock);
635
636 static void leds_done(struct adb_request *req)
637 {
638 int leds = 0, device = 0, pending = 0;
639 unsigned long flags;
640
641 spin_lock_irqsave(&leds_lock, flags);
642
643 if (pending_led_start != pending_led_end) {
644 device = pending_devs[pending_led_start];
645 leds = leds_pending[device] & 0xff;
646 leds_pending[device] = 0;
647 pending_led_start++;
648 pending_led_start = (pending_led_start < 16) ? pending_led_start : 0;
649 pending = leds_req_pending;
650 } else
651 leds_req_pending = 0;
652 spin_unlock_irqrestore(&leds_lock, flags);
653 if (pending)
654 adb_request(&led_request, leds_done, 0, 3,
655 ADB_WRITEREG(device, KEYB_LEDREG), 0xff, ~leds);
656 }
657
658 static void real_leds(unsigned char leds, int device)
659 {
660 unsigned long flags;
661
662 spin_lock_irqsave(&leds_lock, flags);
663 if (!leds_req_pending) {
664 leds_req_pending = 1;
665 spin_unlock_irqrestore(&leds_lock, flags);
666 adb_request(&led_request, leds_done, 0, 3,
667 ADB_WRITEREG(device, KEYB_LEDREG), 0xff, ~leds);
668 return;
669 } else {
670 if (!(leds_pending[device] & 0x100)) {
671 pending_devs[pending_led_end] = device;
672 pending_led_end++;
673 pending_led_end = (pending_led_end < 16) ? pending_led_end : 0;
674 }
675 leds_pending[device] = leds | 0x100;
676 }
677 spin_unlock_irqrestore(&leds_lock, flags);
678 }
679
680 /*
681 * Event callback from the input module. Events that change the state of
682 * the hardware are processed here.
683 */
684 static int adbhid_kbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
685 {
686 struct adbhid *adbhid = input_get_drvdata(dev);
687 unsigned char leds;
688
689 switch (type) {
690 case EV_LED:
691 leds = (test_bit(LED_SCROLLL, dev->led) ? 4 : 0) |
692 (test_bit(LED_NUML, dev->led) ? 1 : 0) |
693 (test_bit(LED_CAPSL, dev->led) ? 2 : 0);
694 real_leds(leds, adbhid->id);
695 return 0;
696 }
697
698 return -1;
699 }
700
701 static void
702 adbhid_kbd_capslock_remember(void)
703 {
704 struct adbhid *ahid;
705 int i;
706
707 for (i = 1; i < 16; i++) {
708 ahid = adbhid[i];
709
710 if (ahid && ahid->id == ADB_KEYBOARD)
711 if (ahid->flags & FLAG_CAPSLOCK_TRANSLATE)
712 ahid->flags |= FLAG_CAPSLOCK_IGNORE_NEXT;
713 }
714 }
715
716 static int
717 adb_message_handler(struct notifier_block *this, unsigned long code, void *x)
718 {
719 switch (code) {
720 case ADB_MSG_PRE_RESET:
721 case ADB_MSG_POWERDOWN:
722 /* Stop the repeat timer. Autopoll is already off at this point */
723 {
724 int i;
725 for (i = 1; i < 16; i++) {
726 if (adbhid[i])
727 del_timer_sync(&adbhid[i]->input->timer);
728 }
729 }
730
731 /* Stop pending led requests */
732 while (leds_req_pending)
733 adb_poll();
734
735 /* After resume, and if the capslock LED is on, the PMU will
736 * send a "capslock down" key event. This confuses the
737 * restore_capslock_events logic. Remember if the capslock
738 * LED was on before suspend so the unwanted key event can
739 * be ignored after resume. */
740 if (restore_capslock_events)
741 adbhid_kbd_capslock_remember();
742
743 break;
744
745 case ADB_MSG_POST_RESET:
746 adbhid_probe();
747 break;
748 }
749 return NOTIFY_DONE;
750 }
751
752 static int
753 adbhid_input_register(int id, int default_id, int original_handler_id,
754 int current_handler_id, int mouse_kind)
755 {
756 struct adbhid *hid;
757 struct input_dev *input_dev;
758 int err;
759 int i;
760
761 if (adbhid[id]) {
762 printk(KERN_ERR "Trying to reregister ADB HID on ID %d\n", id);
763 return -EEXIST;
764 }
765
766 adbhid[id] = hid = kzalloc(sizeof(struct adbhid), GFP_KERNEL);
767 input_dev = input_allocate_device();
768 if (!hid || !input_dev) {
769 err = -ENOMEM;
770 goto fail;
771 }
772
773 sprintf(hid->phys, "adb%d:%d.%02x/input", id, default_id, original_handler_id);
774
775 hid->input = input_dev;
776 hid->id = default_id;
777 hid->original_handler_id = original_handler_id;
778 hid->current_handler_id = current_handler_id;
779 hid->mouse_kind = mouse_kind;
780 hid->flags = 0;
781 input_set_drvdata(input_dev, hid);
782 input_dev->name = hid->name;
783 input_dev->phys = hid->phys;
784 input_dev->id.bustype = BUS_ADB;
785 input_dev->id.vendor = 0x0001;
786 input_dev->id.product = (id << 12) | (default_id << 8) | original_handler_id;
787 input_dev->id.version = 0x0100;
788
789 switch (default_id) {
790 case ADB_KEYBOARD:
791 hid->keycode = kmalloc(sizeof(adb_to_linux_keycodes), GFP_KERNEL);
792 if (!hid->keycode) {
793 err = -ENOMEM;
794 goto fail;
795 }
796
797 sprintf(hid->name, "ADB keyboard");
798
799 memcpy(hid->keycode, adb_to_linux_keycodes, sizeof(adb_to_linux_keycodes));
800
801 printk(KERN_INFO "Detected ADB keyboard, type ");
802 switch (original_handler_id) {
803 default:
804 printk("<unknown>.\n");
805 input_dev->id.version = ADB_KEYBOARD_UNKNOWN;
806 break;
807
808 case 0x01: case 0x02: case 0x03: case 0x06: case 0x08:
809 case 0x0C: case 0x10: case 0x18: case 0x1B: case 0x1C:
810 case 0xC0: case 0xC3: case 0xC6:
811 printk("ANSI.\n");
812 input_dev->id.version = ADB_KEYBOARD_ANSI;
813 break;
814
815 case 0x04: case 0x05: case 0x07: case 0x09: case 0x0D:
816 case 0x11: case 0x14: case 0x19: case 0x1D: case 0xC1:
817 case 0xC4: case 0xC7:
818 printk("ISO, swapping keys.\n");
819 input_dev->id.version = ADB_KEYBOARD_ISO;
820 i = hid->keycode[10];
821 hid->keycode[10] = hid->keycode[50];
822 hid->keycode[50] = i;
823 break;
824
825 case 0x12: case 0x15: case 0x16: case 0x17: case 0x1A:
826 case 0x1E: case 0xC2: case 0xC5: case 0xC8: case 0xC9:
827 printk("JIS.\n");
828 input_dev->id.version = ADB_KEYBOARD_JIS;
829 break;
830 }
831
832 for (i = 0; i < 128; i++)
833 if (hid->keycode[i])
834 set_bit(hid->keycode[i], input_dev->keybit);
835
836 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_LED) |
837 BIT_MASK(EV_REP);
838 input_dev->ledbit[0] = BIT_MASK(LED_SCROLLL) |
839 BIT_MASK(LED_CAPSL) | BIT_MASK(LED_NUML);
840 input_dev->event = adbhid_kbd_event;
841 input_dev->keycodemax = KEY_FN;
842 input_dev->keycodesize = sizeof(hid->keycode[0]);
843 break;
844
845 case ADB_MOUSE:
846 sprintf(hid->name, "ADB mouse");
847
848 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
849 input_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
850 BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
851 input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
852 break;
853
854 case ADB_MISC:
855 switch (original_handler_id) {
856 case 0x02: /* Adjustable keyboard button device */
857 sprintf(hid->name, "ADB adjustable keyboard buttons");
858 input_dev->evbit[0] = BIT_MASK(EV_KEY) |
859 BIT_MASK(EV_REP);
860 set_bit(KEY_SOUND, input_dev->keybit);
861 set_bit(KEY_MUTE, input_dev->keybit);
862 set_bit(KEY_VOLUMEUP, input_dev->keybit);
863 set_bit(KEY_VOLUMEDOWN, input_dev->keybit);
864 break;
865 case 0x1f: /* Powerbook button device */
866 sprintf(hid->name, "ADB Powerbook buttons");
867 input_dev->evbit[0] = BIT_MASK(EV_KEY) |
868 BIT_MASK(EV_REP);
869 set_bit(KEY_MUTE, input_dev->keybit);
870 set_bit(KEY_VOLUMEUP, input_dev->keybit);
871 set_bit(KEY_VOLUMEDOWN, input_dev->keybit);
872 set_bit(KEY_BRIGHTNESSUP, input_dev->keybit);
873 set_bit(KEY_BRIGHTNESSDOWN, input_dev->keybit);
874 set_bit(KEY_EJECTCD, input_dev->keybit);
875 set_bit(KEY_SWITCHVIDEOMODE, input_dev->keybit);
876 set_bit(KEY_KBDILLUMTOGGLE, input_dev->keybit);
877 set_bit(KEY_KBDILLUMDOWN, input_dev->keybit);
878 set_bit(KEY_KBDILLUMUP, input_dev->keybit);
879 break;
880 }
881 if (hid->name[0])
882 break;
883 /* else fall through */
884
885 default:
886 printk(KERN_INFO "Trying to register unknown ADB device to input layer.\n");
887 err = -ENODEV;
888 goto fail;
889 }
890
891 input_dev->keycode = hid->keycode;
892
893 err = input_register_device(input_dev);
894 if (err)
895 goto fail;
896
897 if (default_id == ADB_KEYBOARD) {
898 /* HACK WARNING!! This should go away as soon there is an utility
899 * to control that for event devices.
900 */
901 input_dev->rep[REP_DELAY] = 500; /* input layer default: 250 */
902 input_dev->rep[REP_PERIOD] = 66; /* input layer default: 33 */
903 }
904
905 return 0;
906
907 fail: input_free_device(input_dev);
908 if (hid) {
909 kfree(hid->keycode);
910 kfree(hid);
911 }
912 adbhid[id] = NULL;
913 return err;
914 }
915
916 static void adbhid_input_unregister(int id)
917 {
918 input_unregister_device(adbhid[id]->input);
919 kfree(adbhid[id]->keycode);
920 kfree(adbhid[id]);
921 adbhid[id] = NULL;
922 }
923
924
925 static u16
926 adbhid_input_reregister(int id, int default_id, int org_handler_id,
927 int cur_handler_id, int mk)
928 {
929 if (adbhid[id]) {
930 if (adbhid[id]->input->id.product !=
931 ((id << 12)|(default_id << 8)|org_handler_id)) {
932 adbhid_input_unregister(id);
933 adbhid_input_register(id, default_id, org_handler_id,
934 cur_handler_id, mk);
935 }
936 } else
937 adbhid_input_register(id, default_id, org_handler_id,
938 cur_handler_id, mk);
939 return 1<<id;
940 }
941
942 static void
943 adbhid_input_devcleanup(u16 exist)
944 {
945 int i;
946 for(i=1; i<16; i++)
947 if (adbhid[i] && !(exist&(1<<i)))
948 adbhid_input_unregister(i);
949 }
950
951 static void
952 adbhid_probe(void)
953 {
954 struct adb_request req;
955 int i, default_id, org_handler_id, cur_handler_id;
956 u16 reg = 0;
957
958 adb_register(ADB_MOUSE, 0, &mouse_ids, adbhid_mouse_input);
959 adb_register(ADB_KEYBOARD, 0, &keyboard_ids, adbhid_keyboard_input);
960 adb_register(ADB_MISC, 0, &buttons_ids, adbhid_buttons_input);
961
962 for (i = 0; i < keyboard_ids.nids; i++) {
963 int id = keyboard_ids.id[i];
964
965 adb_get_infos(id, &default_id, &org_handler_id);
966
967 /* turn off all leds */
968 adb_request(&req, NULL, ADBREQ_SYNC, 3,
969 ADB_WRITEREG(id, KEYB_LEDREG), 0xff, 0xff);
970
971 /* Enable full feature set of the keyboard
972 ->get it to send separate codes for left and right shift,
973 control, option keys */
974 #if 0 /* handler 5 doesn't send separate codes for R modifiers */
975 if (adb_try_handler_change(id, 5))
976 printk("ADB keyboard at %d, handler set to 5\n", id);
977 else
978 #endif
979 if (adb_try_handler_change(id, 3))
980 printk("ADB keyboard at %d, handler set to 3\n", id);
981 else
982 printk("ADB keyboard at %d, handler 1\n", id);
983
984 adb_get_infos(id, &default_id, &cur_handler_id);
985 reg |= adbhid_input_reregister(id, default_id, org_handler_id,
986 cur_handler_id, 0);
987 }
988
989 for (i = 0; i < buttons_ids.nids; i++) {
990 int id = buttons_ids.id[i];
991
992 adb_get_infos(id, &default_id, &org_handler_id);
993 reg |= adbhid_input_reregister(id, default_id, org_handler_id,
994 org_handler_id, 0);
995 }
996
997 /* Try to switch all mice to handler 4, or 2 for three-button
998 mode and full resolution. */
999 for (i = 0; i < mouse_ids.nids; i++) {
1000 int id = mouse_ids.id[i];
1001 int mouse_kind;
1002
1003 adb_get_infos(id, &default_id, &org_handler_id);
1004
1005 if (adb_try_handler_change(id, 4)) {
1006 printk("ADB mouse at %d, handler set to 4", id);
1007 mouse_kind = ADBMOUSE_EXTENDED;
1008 }
1009 else if (adb_try_handler_change(id, 0x2F)) {
1010 printk("ADB mouse at %d, handler set to 0x2F", id);
1011 mouse_kind = ADBMOUSE_MICROSPEED;
1012 }
1013 else if (adb_try_handler_change(id, 0x42)) {
1014 printk("ADB mouse at %d, handler set to 0x42", id);
1015 mouse_kind = ADBMOUSE_TRACKBALLPRO;
1016 }
1017 else if (adb_try_handler_change(id, 0x66)) {
1018 printk("ADB mouse at %d, handler set to 0x66", id);
1019 mouse_kind = ADBMOUSE_MICROSPEED;
1020 }
1021 else if (adb_try_handler_change(id, 0x5F)) {
1022 printk("ADB mouse at %d, handler set to 0x5F", id);
1023 mouse_kind = ADBMOUSE_MICROSPEED;
1024 }
1025 else if (adb_try_handler_change(id, 3)) {
1026 printk("ADB mouse at %d, handler set to 3", id);
1027 mouse_kind = ADBMOUSE_MS_A3;
1028 }
1029 else if (adb_try_handler_change(id, 2)) {
1030 printk("ADB mouse at %d, handler set to 2", id);
1031 mouse_kind = ADBMOUSE_STANDARD_200;
1032 }
1033 else {
1034 printk("ADB mouse at %d, handler 1", id);
1035 mouse_kind = ADBMOUSE_STANDARD_100;
1036 }
1037
1038 if ((mouse_kind == ADBMOUSE_TRACKBALLPRO)
1039 || (mouse_kind == ADBMOUSE_MICROSPEED)) {
1040 init_microspeed(id);
1041 } else if (mouse_kind == ADBMOUSE_MS_A3) {
1042 init_ms_a3(id);
1043 } else if (mouse_kind == ADBMOUSE_EXTENDED) {
1044 /*
1045 * Register 1 is usually used for device
1046 * identification. Here, we try to identify
1047 * a known device and call the appropriate
1048 * init function.
1049 */
1050 adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
1051 ADB_READREG(id, 1));
1052
1053 if ((req.reply_len) &&
1054 (req.reply[1] == 0x9a) && ((req.reply[2] == 0x21)
1055 || (req.reply[2] == 0x20))) {
1056 mouse_kind = ADBMOUSE_TRACKBALL;
1057 init_trackball(id);
1058 }
1059 else if ((req.reply_len >= 4) &&
1060 (req.reply[1] == 0x74) && (req.reply[2] == 0x70) &&
1061 (req.reply[3] == 0x61) && (req.reply[4] == 0x64)) {
1062 mouse_kind = ADBMOUSE_TRACKPAD;
1063 init_trackpad(id);
1064 }
1065 else if ((req.reply_len >= 4) &&
1066 (req.reply[1] == 0x4b) && (req.reply[2] == 0x4d) &&
1067 (req.reply[3] == 0x4c) && (req.reply[4] == 0x31)) {
1068 mouse_kind = ADBMOUSE_TURBOMOUSE5;
1069 init_turbomouse(id);
1070 }
1071 else if ((req.reply_len == 9) &&
1072 (req.reply[1] == 0x4b) && (req.reply[2] == 0x4f) &&
1073 (req.reply[3] == 0x49) && (req.reply[4] == 0x54)) {
1074 if (adb_try_handler_change(id, 0x42)) {
1075 printk("\nADB MacAlly 2-button mouse at %d, handler set to 0x42", id);
1076 mouse_kind = ADBMOUSE_MACALLY2;
1077 }
1078 }
1079 }
1080 printk("\n");
1081
1082 adb_get_infos(id, &default_id, &cur_handler_id);
1083 reg |= adbhid_input_reregister(id, default_id, org_handler_id,
1084 cur_handler_id, mouse_kind);
1085 }
1086 adbhid_input_devcleanup(reg);
1087 }
1088
1089 static void
1090 init_trackpad(int id)
1091 {
1092 struct adb_request req;
1093 unsigned char r1_buffer[8];
1094
1095 printk(" (trackpad)");
1096
1097 adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
1098 ADB_READREG(id,1));
1099 if (req.reply_len < 8)
1100 printk("bad length for reg. 1\n");
1101 else
1102 {
1103 memcpy(r1_buffer, &req.reply[1], 8);
1104
1105 adb_request(&req, NULL, ADBREQ_SYNC, 9,
1106 ADB_WRITEREG(id,1),
1107 r1_buffer[0],
1108 r1_buffer[1],
1109 r1_buffer[2],
1110 r1_buffer[3],
1111 r1_buffer[4],
1112 r1_buffer[5],
1113 0x0d,
1114 r1_buffer[7]);
1115
1116 adb_request(&req, NULL, ADBREQ_SYNC, 9,
1117 ADB_WRITEREG(id,2),
1118 0x99,
1119 0x94,
1120 0x19,
1121 0xff,
1122 0xb2,
1123 0x8a,
1124 0x1b,
1125 0x50);
1126
1127 adb_request(&req, NULL, ADBREQ_SYNC, 9,
1128 ADB_WRITEREG(id,1),
1129 r1_buffer[0],
1130 r1_buffer[1],
1131 r1_buffer[2],
1132 r1_buffer[3],
1133 r1_buffer[4],
1134 r1_buffer[5],
1135 0x03, /*r1_buffer[6],*/
1136 r1_buffer[7]);
1137
1138 /* Without this flush, the trackpad may be locked up */
1139 adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1140 }
1141 }
1142
1143 static void
1144 init_trackball(int id)
1145 {
1146 struct adb_request req;
1147
1148 printk(" (trackman/mouseman)");
1149
1150 adb_request(&req, NULL, ADBREQ_SYNC, 3,
1151 ADB_WRITEREG(id,1), 00,0x81);
1152
1153 adb_request(&req, NULL, ADBREQ_SYNC, 3,
1154 ADB_WRITEREG(id,1), 01,0x81);
1155
1156 adb_request(&req, NULL, ADBREQ_SYNC, 3,
1157 ADB_WRITEREG(id,1), 02,0x81);
1158
1159 adb_request(&req, NULL, ADBREQ_SYNC, 3,
1160 ADB_WRITEREG(id,1), 03,0x38);
1161
1162 adb_request(&req, NULL, ADBREQ_SYNC, 3,
1163 ADB_WRITEREG(id,1), 00,0x81);
1164
1165 adb_request(&req, NULL, ADBREQ_SYNC, 3,
1166 ADB_WRITEREG(id,1), 01,0x81);
1167
1168 adb_request(&req, NULL, ADBREQ_SYNC, 3,
1169 ADB_WRITEREG(id,1), 02,0x81);
1170
1171 adb_request(&req, NULL, ADBREQ_SYNC, 3,
1172 ADB_WRITEREG(id,1), 03,0x38);
1173 }
1174
1175 static void
1176 init_turbomouse(int id)
1177 {
1178 struct adb_request req;
1179
1180 printk(" (TurboMouse 5)");
1181
1182 adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1183
1184 adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(3));
1185
1186 adb_request(&req, NULL, ADBREQ_SYNC, 9,
1187 ADB_WRITEREG(3,2),
1188 0xe7,
1189 0x8c,
1190 0,
1191 0,
1192 0,
1193 0xff,
1194 0xff,
1195 0x94);
1196
1197 adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(3));
1198
1199 adb_request(&req, NULL, ADBREQ_SYNC, 9,
1200 ADB_WRITEREG(3,2),
1201 0xa5,
1202 0x14,
1203 0,
1204 0,
1205 0x69,
1206 0xff,
1207 0xff,
1208 0x27);
1209 }
1210
1211 static void
1212 init_microspeed(int id)
1213 {
1214 struct adb_request req;
1215
1216 printk(" (Microspeed/MacPoint or compatible)");
1217
1218 adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1219
1220 /* This will initialize mice using the Microspeed, MacPoint and
1221 other compatible firmware. Bit 12 enables extended protocol.
1222
1223 Register 1 Listen (4 Bytes)
1224 0 - 3 Button is mouse (set also for double clicking!!!)
1225 4 - 7 Button is locking (affects change speed also)
1226 8 - 11 Button changes speed
1227 12 1 = Extended mouse mode, 0 = normal mouse mode
1228 13 - 15 unused 0
1229 16 - 23 normal speed
1230 24 - 31 changed speed
1231
1232 Register 1 talk holds version and product identification information.
1233 Register 1 Talk (4 Bytes):
1234 0 - 7 Product code
1235 8 - 23 undefined, reserved
1236 24 - 31 Version number
1237
1238 Speed 0 is max. 1 to 255 set speed in increments of 1/256 of max.
1239 */
1240 adb_request(&req, NULL, ADBREQ_SYNC, 5,
1241 ADB_WRITEREG(id,1),
1242 0x20, /* alt speed = 0x20 (rather slow) */
1243 0x00, /* norm speed = 0x00 (fastest) */
1244 0x10, /* extended protocol, no speed change */
1245 0x07); /* all buttons enabled as mouse buttons, no locking */
1246
1247
1248 adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1249 }
1250
1251 static void
1252 init_ms_a3(int id)
1253 {
1254 struct adb_request req;
1255
1256 printk(" (Mouse Systems A3 Mouse, or compatible)");
1257 adb_request(&req, NULL, ADBREQ_SYNC, 3,
1258 ADB_WRITEREG(id, 0x2),
1259 0x00,
1260 0x07);
1261
1262 adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
1263 }
1264
1265 static int __init adbhid_init(void)
1266 {
1267 #ifndef CONFIG_MAC
1268 if (!machine_is(chrp) && !machine_is(powermac))
1269 return 0;
1270 #endif
1271
1272 led_request.complete = 1;
1273
1274 adbhid_probe();
1275
1276 blocking_notifier_chain_register(&adb_client_list,
1277 &adbhid_adb_notifier);
1278
1279 return 0;
1280 }
1281
1282 static void __exit adbhid_exit(void)
1283 {
1284 }
1285
1286 module_init(adbhid_init);
1287 module_exit(adbhid_exit);
Linux with added FPC-III support