gro: Allow tunnel stacking in the case of FOU/GUE
[linux/fpc-iii.git] / drivers / misc / mei / hbm.c
blob58da92565c5ed332aca5101d7930722a759f4f31
1 /*
3 * Intel Management Engine Interface (Intel MEI) Linux driver
4 * Copyright (c) 2003-2012, Intel Corporation.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 * more details.
17 #include <linux/export.h>
18 #include <linux/sched.h>
19 #include <linux/wait.h>
20 #include <linux/pm_runtime.h>
21 #include <linux/slab.h>
23 #include <linux/mei.h>
25 #include "mei_dev.h"
26 #include "hbm.h"
27 #include "client.h"
29 static const char *mei_hbm_status_str(enum mei_hbm_status status)
31 #define MEI_HBM_STATUS(status) case MEI_HBMS_##status: return #status
32 switch (status) {
33 MEI_HBM_STATUS(SUCCESS);
34 MEI_HBM_STATUS(CLIENT_NOT_FOUND);
35 MEI_HBM_STATUS(ALREADY_EXISTS);
36 MEI_HBM_STATUS(REJECTED);
37 MEI_HBM_STATUS(INVALID_PARAMETER);
38 MEI_HBM_STATUS(NOT_ALLOWED);
39 MEI_HBM_STATUS(ALREADY_STARTED);
40 MEI_HBM_STATUS(NOT_STARTED);
41 default: return "unknown";
43 #undef MEI_HBM_STATUS
46 static const char *mei_cl_conn_status_str(enum mei_cl_connect_status status)
48 #define MEI_CL_CS(status) case MEI_CL_CONN_##status: return #status
49 switch (status) {
50 MEI_CL_CS(SUCCESS);
51 MEI_CL_CS(NOT_FOUND);
52 MEI_CL_CS(ALREADY_STARTED);
53 MEI_CL_CS(OUT_OF_RESOURCES);
54 MEI_CL_CS(MESSAGE_SMALL);
55 default: return "unknown";
57 #undef MEI_CL_CCS
60 const char *mei_hbm_state_str(enum mei_hbm_state state)
62 #define MEI_HBM_STATE(state) case MEI_HBM_##state: return #state
63 switch (state) {
64 MEI_HBM_STATE(IDLE);
65 MEI_HBM_STATE(STARTING);
66 MEI_HBM_STATE(STARTED);
67 MEI_HBM_STATE(ENUM_CLIENTS);
68 MEI_HBM_STATE(CLIENT_PROPERTIES);
69 MEI_HBM_STATE(STOPPED);
70 default:
71 return "unknown";
73 #undef MEI_HBM_STATE
76 /**
77 * mei_cl_conn_status_to_errno - convert client connect response
78 * status to error code
80 * @status: client connect response status
82 * Return: corresponding error code
84 static int mei_cl_conn_status_to_errno(enum mei_cl_connect_status status)
86 switch (status) {
87 case MEI_CL_CONN_SUCCESS: return 0;
88 case MEI_CL_CONN_NOT_FOUND: return -ENOTTY;
89 case MEI_CL_CONN_ALREADY_STARTED: return -EBUSY;
90 case MEI_CL_CONN_OUT_OF_RESOURCES: return -EBUSY;
91 case MEI_CL_CONN_MESSAGE_SMALL: return -EINVAL;
92 default: return -EINVAL;
96 /**
97 * mei_hbm_idle - set hbm to idle state
99 * @dev: the device structure
101 void mei_hbm_idle(struct mei_device *dev)
103 dev->init_clients_timer = 0;
104 dev->hbm_state = MEI_HBM_IDLE;
108 * mei_hbm_reset - reset hbm counters and book keeping data structurs
110 * @dev: the device structure
112 void mei_hbm_reset(struct mei_device *dev)
114 dev->me_client_index = 0;
116 mei_me_cl_rm_all(dev);
118 mei_hbm_idle(dev);
122 * mei_hbm_hdr - construct hbm header
124 * @hdr: hbm header
125 * @length: payload length
128 static inline void mei_hbm_hdr(struct mei_msg_hdr *hdr, size_t length)
130 hdr->host_addr = 0;
131 hdr->me_addr = 0;
132 hdr->length = length;
133 hdr->msg_complete = 1;
134 hdr->reserved = 0;
138 * mei_hbm_cl_hdr - construct client hbm header
140 * @cl: client
141 * @hbm_cmd: host bus message command
142 * @buf: buffer for cl header
143 * @len: buffer length
145 static inline
146 void mei_hbm_cl_hdr(struct mei_cl *cl, u8 hbm_cmd, void *buf, size_t len)
148 struct mei_hbm_cl_cmd *cmd = buf;
150 memset(cmd, 0, len);
152 cmd->hbm_cmd = hbm_cmd;
153 cmd->host_addr = cl->host_client_id;
154 cmd->me_addr = cl->me_client_id;
158 * mei_hbm_cl_write - write simple hbm client message
160 * @dev: the device structure
161 * @cl: client
162 * @hbm_cmd: host bus message command
163 * @len: buffer length
165 * Return: 0 on success, <0 on failure.
167 static inline
168 int mei_hbm_cl_write(struct mei_device *dev,
169 struct mei_cl *cl, u8 hbm_cmd, size_t len)
171 struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr;
173 mei_hbm_hdr(mei_hdr, len);
174 mei_hbm_cl_hdr(cl, hbm_cmd, dev->wr_msg.data, len);
176 return mei_write_message(dev, mei_hdr, dev->wr_msg.data);
180 * mei_hbm_cl_addr_equal - check if the client's and
181 * the message address match
183 * @cl: client
184 * @cmd: hbm client message
186 * Return: true if addresses are the same
188 static inline
189 bool mei_hbm_cl_addr_equal(struct mei_cl *cl, struct mei_hbm_cl_cmd *cmd)
191 return cl->host_client_id == cmd->host_addr &&
192 cl->me_client_id == cmd->me_addr;
196 * mei_hbm_cl_find_by_cmd - find recipient client
198 * @dev: the device structure
199 * @buf: a buffer with hbm cl command
201 * Return: the recipient client or NULL if not found
203 static inline
204 struct mei_cl *mei_hbm_cl_find_by_cmd(struct mei_device *dev, void *buf)
206 struct mei_hbm_cl_cmd *cmd = (struct mei_hbm_cl_cmd *)buf;
207 struct mei_cl *cl;
209 list_for_each_entry(cl, &dev->file_list, link)
210 if (mei_hbm_cl_addr_equal(cl, cmd))
211 return cl;
212 return NULL;
217 * mei_hbm_start_wait - wait for start response message.
219 * @dev: the device structure
221 * Return: 0 on success and < 0 on failure
223 int mei_hbm_start_wait(struct mei_device *dev)
225 int ret;
227 if (dev->hbm_state > MEI_HBM_STARTING)
228 return 0;
230 mutex_unlock(&dev->device_lock);
231 ret = wait_event_timeout(dev->wait_hbm_start,
232 dev->hbm_state != MEI_HBM_STARTING,
233 mei_secs_to_jiffies(MEI_HBM_TIMEOUT));
234 mutex_lock(&dev->device_lock);
236 if (ret == 0 && (dev->hbm_state <= MEI_HBM_STARTING)) {
237 dev->hbm_state = MEI_HBM_IDLE;
238 dev_err(dev->dev, "waiting for mei start failed\n");
239 return -ETIME;
241 return 0;
245 * mei_hbm_start_req - sends start request message.
247 * @dev: the device structure
249 * Return: 0 on success and < 0 on failure
251 int mei_hbm_start_req(struct mei_device *dev)
253 struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr;
254 struct hbm_host_version_request *start_req;
255 const size_t len = sizeof(struct hbm_host_version_request);
256 int ret;
258 mei_hbm_reset(dev);
260 mei_hbm_hdr(mei_hdr, len);
262 /* host start message */
263 start_req = (struct hbm_host_version_request *)dev->wr_msg.data;
264 memset(start_req, 0, len);
265 start_req->hbm_cmd = HOST_START_REQ_CMD;
266 start_req->host_version.major_version = HBM_MAJOR_VERSION;
267 start_req->host_version.minor_version = HBM_MINOR_VERSION;
269 dev->hbm_state = MEI_HBM_IDLE;
270 ret = mei_write_message(dev, mei_hdr, dev->wr_msg.data);
271 if (ret) {
272 dev_err(dev->dev, "version message write failed: ret = %d\n",
273 ret);
274 return ret;
277 dev->hbm_state = MEI_HBM_STARTING;
278 dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
279 return 0;
283 * mei_hbm_enum_clients_req - sends enumeration client request message.
285 * @dev: the device structure
287 * Return: 0 on success and < 0 on failure
289 static int mei_hbm_enum_clients_req(struct mei_device *dev)
291 struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr;
292 struct hbm_host_enum_request *enum_req;
293 const size_t len = sizeof(struct hbm_host_enum_request);
294 int ret;
296 /* enumerate clients */
297 mei_hbm_hdr(mei_hdr, len);
299 enum_req = (struct hbm_host_enum_request *)dev->wr_msg.data;
300 memset(enum_req, 0, len);
301 enum_req->hbm_cmd = HOST_ENUM_REQ_CMD;
303 ret = mei_write_message(dev, mei_hdr, dev->wr_msg.data);
304 if (ret) {
305 dev_err(dev->dev, "enumeration request write failed: ret = %d.\n",
306 ret);
307 return ret;
309 dev->hbm_state = MEI_HBM_ENUM_CLIENTS;
310 dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
311 return 0;
315 * mei_hbm_me_cl_add - add new me client to the list
317 * @dev: the device structure
318 * @res: hbm property response
320 * Return: 0 on success and -ENOMEM on allocation failure
323 static int mei_hbm_me_cl_add(struct mei_device *dev,
324 struct hbm_props_response *res)
326 struct mei_me_client *me_cl;
327 const uuid_le *uuid = &res->client_properties.protocol_name;
329 mei_me_cl_rm_by_uuid(dev, uuid);
331 me_cl = kzalloc(sizeof(struct mei_me_client), GFP_KERNEL);
332 if (!me_cl)
333 return -ENOMEM;
335 mei_me_cl_init(me_cl);
337 me_cl->props = res->client_properties;
338 me_cl->client_id = res->me_addr;
339 me_cl->mei_flow_ctrl_creds = 0;
341 mei_me_cl_add(dev, me_cl);
343 return 0;
347 * mei_hbm_prop_req - request property for a single client
349 * @dev: the device structure
351 * Return: 0 on success and < 0 on failure
354 static int mei_hbm_prop_req(struct mei_device *dev)
357 struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr;
358 struct hbm_props_request *prop_req;
359 const size_t len = sizeof(struct hbm_props_request);
360 unsigned long next_client_index;
361 int ret;
363 next_client_index = find_next_bit(dev->me_clients_map, MEI_CLIENTS_MAX,
364 dev->me_client_index);
366 /* We got all client properties */
367 if (next_client_index == MEI_CLIENTS_MAX) {
368 dev->hbm_state = MEI_HBM_STARTED;
369 schedule_work(&dev->init_work);
371 return 0;
374 mei_hbm_hdr(mei_hdr, len);
375 prop_req = (struct hbm_props_request *)dev->wr_msg.data;
377 memset(prop_req, 0, sizeof(struct hbm_props_request));
379 prop_req->hbm_cmd = HOST_CLIENT_PROPERTIES_REQ_CMD;
380 prop_req->me_addr = next_client_index;
382 ret = mei_write_message(dev, mei_hdr, dev->wr_msg.data);
383 if (ret) {
384 dev_err(dev->dev, "properties request write failed: ret = %d\n",
385 ret);
386 return ret;
389 dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
390 dev->me_client_index = next_client_index;
392 return 0;
396 * mei_hbm_pg - sends pg command
398 * @dev: the device structure
399 * @pg_cmd: the pg command code
401 * Return: -EIO on write failure
402 * -EOPNOTSUPP if the operation is not supported by the protocol
404 int mei_hbm_pg(struct mei_device *dev, u8 pg_cmd)
406 struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr;
407 struct hbm_power_gate *req;
408 const size_t len = sizeof(struct hbm_power_gate);
409 int ret;
411 if (!dev->hbm_f_pg_supported)
412 return -EOPNOTSUPP;
414 mei_hbm_hdr(mei_hdr, len);
416 req = (struct hbm_power_gate *)dev->wr_msg.data;
417 memset(req, 0, len);
418 req->hbm_cmd = pg_cmd;
420 ret = mei_write_message(dev, mei_hdr, dev->wr_msg.data);
421 if (ret)
422 dev_err(dev->dev, "power gate command write failed.\n");
423 return ret;
425 EXPORT_SYMBOL_GPL(mei_hbm_pg);
428 * mei_hbm_stop_req - send stop request message
430 * @dev: mei device
432 * Return: -EIO on write failure
434 static int mei_hbm_stop_req(struct mei_device *dev)
436 struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr;
437 struct hbm_host_stop_request *req =
438 (struct hbm_host_stop_request *)dev->wr_msg.data;
439 const size_t len = sizeof(struct hbm_host_stop_request);
441 mei_hbm_hdr(mei_hdr, len);
443 memset(req, 0, len);
444 req->hbm_cmd = HOST_STOP_REQ_CMD;
445 req->reason = DRIVER_STOP_REQUEST;
447 return mei_write_message(dev, mei_hdr, dev->wr_msg.data);
451 * mei_hbm_cl_flow_control_req - sends flow control request.
453 * @dev: the device structure
454 * @cl: client info
456 * Return: -EIO on write failure
458 int mei_hbm_cl_flow_control_req(struct mei_device *dev, struct mei_cl *cl)
460 const size_t len = sizeof(struct hbm_flow_control);
462 cl_dbg(dev, cl, "sending flow control\n");
463 return mei_hbm_cl_write(dev, cl, MEI_FLOW_CONTROL_CMD, len);
467 * mei_hbm_add_single_flow_creds - adds single buffer credentials.
469 * @dev: the device structure
470 * @flow: flow control.
472 * Return: 0 on success, < 0 otherwise
474 static int mei_hbm_add_single_flow_creds(struct mei_device *dev,
475 struct hbm_flow_control *flow)
477 struct mei_me_client *me_cl;
478 int rets;
480 me_cl = mei_me_cl_by_id(dev, flow->me_addr);
481 if (!me_cl) {
482 dev_err(dev->dev, "no such me client %d\n",
483 flow->me_addr);
484 return -ENOENT;
487 if (WARN_ON(me_cl->props.single_recv_buf == 0)) {
488 rets = -EINVAL;
489 goto out;
492 me_cl->mei_flow_ctrl_creds++;
493 dev_dbg(dev->dev, "recv flow ctrl msg ME %d (single) creds = %d.\n",
494 flow->me_addr, me_cl->mei_flow_ctrl_creds);
496 rets = 0;
497 out:
498 mei_me_cl_put(me_cl);
499 return rets;
503 * mei_hbm_cl_flow_control_res - flow control response from me
505 * @dev: the device structure
506 * @flow_control: flow control response bus message
508 static void mei_hbm_cl_flow_control_res(struct mei_device *dev,
509 struct hbm_flow_control *flow_control)
511 struct mei_cl *cl;
513 if (!flow_control->host_addr) {
514 /* single receive buffer */
515 mei_hbm_add_single_flow_creds(dev, flow_control);
516 return;
519 cl = mei_hbm_cl_find_by_cmd(dev, flow_control);
520 if (cl) {
521 cl->mei_flow_ctrl_creds++;
522 cl_dbg(dev, cl, "flow control creds = %d.\n",
523 cl->mei_flow_ctrl_creds);
529 * mei_hbm_cl_disconnect_req - sends disconnect message to fw.
531 * @dev: the device structure
532 * @cl: a client to disconnect from
534 * Return: -EIO on write failure
536 int mei_hbm_cl_disconnect_req(struct mei_device *dev, struct mei_cl *cl)
538 const size_t len = sizeof(struct hbm_client_connect_request);
540 return mei_hbm_cl_write(dev, cl, CLIENT_DISCONNECT_REQ_CMD, len);
544 * mei_hbm_cl_disconnect_rsp - sends disconnect respose to the FW
546 * @dev: the device structure
547 * @cl: a client to disconnect from
549 * Return: -EIO on write failure
551 int mei_hbm_cl_disconnect_rsp(struct mei_device *dev, struct mei_cl *cl)
553 const size_t len = sizeof(struct hbm_client_connect_response);
555 return mei_hbm_cl_write(dev, cl, CLIENT_DISCONNECT_RES_CMD, len);
559 * mei_hbm_cl_disconnect_res - update the client state according
560 * disconnect response
562 * @dev: the device structure
563 * @cl: mei host client
564 * @cmd: disconnect client response host bus message
566 static void mei_hbm_cl_disconnect_res(struct mei_device *dev, struct mei_cl *cl,
567 struct mei_hbm_cl_cmd *cmd)
569 struct hbm_client_connect_response *rs =
570 (struct hbm_client_connect_response *)cmd;
572 cl_dbg(dev, cl, "hbm: disconnect response status=%d\n", rs->status);
574 if (rs->status == MEI_CL_DISCONN_SUCCESS)
575 cl->state = MEI_FILE_DISCONNECTED;
576 cl->status = 0;
580 * mei_hbm_cl_connect_req - send connection request to specific me client
582 * @dev: the device structure
583 * @cl: a client to connect to
585 * Return: -EIO on write failure
587 int mei_hbm_cl_connect_req(struct mei_device *dev, struct mei_cl *cl)
589 const size_t len = sizeof(struct hbm_client_connect_request);
591 return mei_hbm_cl_write(dev, cl, CLIENT_CONNECT_REQ_CMD, len);
595 * mei_hbm_cl_connect_res - update the client state according
596 * connection response
598 * @dev: the device structure
599 * @cl: mei host client
600 * @cmd: connect client response host bus message
602 static void mei_hbm_cl_connect_res(struct mei_device *dev, struct mei_cl *cl,
603 struct mei_hbm_cl_cmd *cmd)
605 struct hbm_client_connect_response *rs =
606 (struct hbm_client_connect_response *)cmd;
608 cl_dbg(dev, cl, "hbm: connect response status=%s\n",
609 mei_cl_conn_status_str(rs->status));
611 if (rs->status == MEI_CL_CONN_SUCCESS)
612 cl->state = MEI_FILE_CONNECTED;
613 else
614 cl->state = MEI_FILE_DISCONNECTED;
615 cl->status = mei_cl_conn_status_to_errno(rs->status);
619 * mei_hbm_cl_res - process hbm response received on behalf
620 * an client
622 * @dev: the device structure
623 * @rs: hbm client message
624 * @fop_type: file operation type
626 static void mei_hbm_cl_res(struct mei_device *dev,
627 struct mei_hbm_cl_cmd *rs,
628 enum mei_cb_file_ops fop_type)
630 struct mei_cl *cl;
631 struct mei_cl_cb *cb, *next;
633 cl = NULL;
634 list_for_each_entry_safe(cb, next, &dev->ctrl_rd_list.list, list) {
636 cl = cb->cl;
638 if (cb->fop_type != fop_type)
639 continue;
641 if (mei_hbm_cl_addr_equal(cl, rs)) {
642 list_del_init(&cb->list);
643 break;
647 if (!cl)
648 return;
650 switch (fop_type) {
651 case MEI_FOP_CONNECT:
652 mei_hbm_cl_connect_res(dev, cl, rs);
653 break;
654 case MEI_FOP_DISCONNECT:
655 mei_hbm_cl_disconnect_res(dev, cl, rs);
656 break;
657 default:
658 return;
661 cl->timer_count = 0;
662 wake_up(&cl->wait);
667 * mei_hbm_fw_disconnect_req - disconnect request initiated by ME firmware
668 * host sends disconnect response
670 * @dev: the device structure.
671 * @disconnect_req: disconnect request bus message from the me
673 * Return: -ENOMEM on allocation failure
675 static int mei_hbm_fw_disconnect_req(struct mei_device *dev,
676 struct hbm_client_connect_request *disconnect_req)
678 struct mei_cl *cl;
679 struct mei_cl_cb *cb;
681 cl = mei_hbm_cl_find_by_cmd(dev, disconnect_req);
682 if (cl) {
683 cl_dbg(dev, cl, "disconnect request received\n");
684 cl->state = MEI_FILE_DISCONNECTED;
685 cl->timer_count = 0;
687 cb = mei_io_cb_init(cl, MEI_FOP_DISCONNECT_RSP, NULL);
688 if (!cb)
689 return -ENOMEM;
690 cl_dbg(dev, cl, "add disconnect response as first\n");
691 list_add(&cb->list, &dev->ctrl_wr_list.list);
693 return 0;
697 * mei_hbm_config_features - check what hbm features and commands
698 * are supported by the fw
700 * @dev: the device structure
702 static void mei_hbm_config_features(struct mei_device *dev)
704 /* Power Gating Isolation Support */
705 dev->hbm_f_pg_supported = 0;
706 if (dev->version.major_version > HBM_MAJOR_VERSION_PGI)
707 dev->hbm_f_pg_supported = 1;
709 if (dev->version.major_version == HBM_MAJOR_VERSION_PGI &&
710 dev->version.minor_version >= HBM_MINOR_VERSION_PGI)
711 dev->hbm_f_pg_supported = 1;
715 * mei_hbm_version_is_supported - checks whether the driver can
716 * support the hbm version of the device
718 * @dev: the device structure
719 * Return: true if driver can support hbm version of the device
721 bool mei_hbm_version_is_supported(struct mei_device *dev)
723 return (dev->version.major_version < HBM_MAJOR_VERSION) ||
724 (dev->version.major_version == HBM_MAJOR_VERSION &&
725 dev->version.minor_version <= HBM_MINOR_VERSION);
729 * mei_hbm_dispatch - bottom half read routine after ISR to
730 * handle the read bus message cmd processing.
732 * @dev: the device structure
733 * @hdr: header of bus message
735 * Return: 0 on success and < 0 on failure
737 int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr)
739 struct mei_bus_message *mei_msg;
740 struct hbm_host_version_response *version_res;
741 struct hbm_props_response *props_res;
742 struct hbm_host_enum_response *enum_res;
744 struct mei_hbm_cl_cmd *cl_cmd;
745 struct hbm_client_connect_request *disconnect_req;
746 struct hbm_flow_control *flow_control;
748 /* read the message to our buffer */
749 BUG_ON(hdr->length >= sizeof(dev->rd_msg_buf));
750 mei_read_slots(dev, dev->rd_msg_buf, hdr->length);
751 mei_msg = (struct mei_bus_message *)dev->rd_msg_buf;
752 cl_cmd = (struct mei_hbm_cl_cmd *)mei_msg;
754 /* ignore spurious message and prevent reset nesting
755 * hbm is put to idle during system reset
757 if (dev->hbm_state == MEI_HBM_IDLE) {
758 dev_dbg(dev->dev, "hbm: state is idle ignore spurious messages\n");
759 return 0;
762 switch (mei_msg->hbm_cmd) {
763 case HOST_START_RES_CMD:
764 dev_dbg(dev->dev, "hbm: start: response message received.\n");
766 dev->init_clients_timer = 0;
768 version_res = (struct hbm_host_version_response *)mei_msg;
770 dev_dbg(dev->dev, "HBM VERSION: DRIVER=%02d:%02d DEVICE=%02d:%02d\n",
771 HBM_MAJOR_VERSION, HBM_MINOR_VERSION,
772 version_res->me_max_version.major_version,
773 version_res->me_max_version.minor_version);
775 if (version_res->host_version_supported) {
776 dev->version.major_version = HBM_MAJOR_VERSION;
777 dev->version.minor_version = HBM_MINOR_VERSION;
778 } else {
779 dev->version.major_version =
780 version_res->me_max_version.major_version;
781 dev->version.minor_version =
782 version_res->me_max_version.minor_version;
785 if (!mei_hbm_version_is_supported(dev)) {
786 dev_warn(dev->dev, "hbm: start: version mismatch - stopping the driver.\n");
788 dev->hbm_state = MEI_HBM_STOPPED;
789 if (mei_hbm_stop_req(dev)) {
790 dev_err(dev->dev, "hbm: start: failed to send stop request\n");
791 return -EIO;
793 break;
796 mei_hbm_config_features(dev);
798 if (dev->dev_state != MEI_DEV_INIT_CLIENTS ||
799 dev->hbm_state != MEI_HBM_STARTING) {
800 dev_err(dev->dev, "hbm: start: state mismatch, [%d, %d]\n",
801 dev->dev_state, dev->hbm_state);
802 return -EPROTO;
805 if (mei_hbm_enum_clients_req(dev)) {
806 dev_err(dev->dev, "hbm: start: failed to send enumeration request\n");
807 return -EIO;
810 wake_up(&dev->wait_hbm_start);
811 break;
813 case CLIENT_CONNECT_RES_CMD:
814 dev_dbg(dev->dev, "hbm: client connect response: message received.\n");
815 mei_hbm_cl_res(dev, cl_cmd, MEI_FOP_CONNECT);
816 break;
818 case CLIENT_DISCONNECT_RES_CMD:
819 dev_dbg(dev->dev, "hbm: client disconnect response: message received.\n");
820 mei_hbm_cl_res(dev, cl_cmd, MEI_FOP_DISCONNECT);
821 break;
823 case MEI_FLOW_CONTROL_CMD:
824 dev_dbg(dev->dev, "hbm: client flow control response: message received.\n");
826 flow_control = (struct hbm_flow_control *) mei_msg;
827 mei_hbm_cl_flow_control_res(dev, flow_control);
828 break;
830 case MEI_PG_ISOLATION_ENTRY_RES_CMD:
831 dev_dbg(dev->dev, "power gate isolation entry response received\n");
832 dev->pg_event = MEI_PG_EVENT_RECEIVED;
833 if (waitqueue_active(&dev->wait_pg))
834 wake_up(&dev->wait_pg);
835 break;
837 case MEI_PG_ISOLATION_EXIT_REQ_CMD:
838 dev_dbg(dev->dev, "power gate isolation exit request received\n");
839 dev->pg_event = MEI_PG_EVENT_RECEIVED;
840 if (waitqueue_active(&dev->wait_pg))
841 wake_up(&dev->wait_pg);
842 else
844 * If the driver is not waiting on this then
845 * this is HW initiated exit from PG.
846 * Start runtime pm resume sequence to exit from PG.
848 pm_request_resume(dev->dev);
849 break;
851 case HOST_CLIENT_PROPERTIES_RES_CMD:
852 dev_dbg(dev->dev, "hbm: properties response: message received.\n");
854 dev->init_clients_timer = 0;
856 if (dev->dev_state != MEI_DEV_INIT_CLIENTS ||
857 dev->hbm_state != MEI_HBM_CLIENT_PROPERTIES) {
858 dev_err(dev->dev, "hbm: properties response: state mismatch, [%d, %d]\n",
859 dev->dev_state, dev->hbm_state);
860 return -EPROTO;
863 props_res = (struct hbm_props_response *)mei_msg;
865 if (props_res->status) {
866 dev_err(dev->dev, "hbm: properties response: wrong status = %d %s\n",
867 props_res->status,
868 mei_hbm_status_str(props_res->status));
869 return -EPROTO;
872 mei_hbm_me_cl_add(dev, props_res);
874 dev->me_client_index++;
876 /* request property for the next client */
877 if (mei_hbm_prop_req(dev))
878 return -EIO;
880 break;
882 case HOST_ENUM_RES_CMD:
883 dev_dbg(dev->dev, "hbm: enumeration response: message received\n");
885 dev->init_clients_timer = 0;
887 enum_res = (struct hbm_host_enum_response *) mei_msg;
888 BUILD_BUG_ON(sizeof(dev->me_clients_map)
889 < sizeof(enum_res->valid_addresses));
890 memcpy(dev->me_clients_map, enum_res->valid_addresses,
891 sizeof(enum_res->valid_addresses));
893 if (dev->dev_state != MEI_DEV_INIT_CLIENTS ||
894 dev->hbm_state != MEI_HBM_ENUM_CLIENTS) {
895 dev_err(dev->dev, "hbm: enumeration response: state mismatch, [%d, %d]\n",
896 dev->dev_state, dev->hbm_state);
897 return -EPROTO;
900 dev->hbm_state = MEI_HBM_CLIENT_PROPERTIES;
902 /* first property request */
903 if (mei_hbm_prop_req(dev))
904 return -EIO;
906 break;
908 case HOST_STOP_RES_CMD:
909 dev_dbg(dev->dev, "hbm: stop response: message received\n");
911 dev->init_clients_timer = 0;
913 if (dev->hbm_state != MEI_HBM_STOPPED) {
914 dev_err(dev->dev, "hbm: stop response: state mismatch, [%d, %d]\n",
915 dev->dev_state, dev->hbm_state);
916 return -EPROTO;
919 dev->dev_state = MEI_DEV_POWER_DOWN;
920 dev_info(dev->dev, "hbm: stop response: resetting.\n");
921 /* force the reset */
922 return -EPROTO;
923 break;
925 case CLIENT_DISCONNECT_REQ_CMD:
926 dev_dbg(dev->dev, "hbm: disconnect request: message received\n");
928 disconnect_req = (struct hbm_client_connect_request *)mei_msg;
929 mei_hbm_fw_disconnect_req(dev, disconnect_req);
930 break;
932 case ME_STOP_REQ_CMD:
933 dev_dbg(dev->dev, "hbm: stop request: message received\n");
934 dev->hbm_state = MEI_HBM_STOPPED;
935 if (mei_hbm_stop_req(dev)) {
936 dev_err(dev->dev, "hbm: stop request: failed to send stop request\n");
937 return -EIO;
939 break;
940 default:
941 BUG();
942 break;
945 return 0;