?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
gro: Allow tunnel stacking in the case of FOU/GUE
[linux/fpc-iii.git] / drivers / pinctrl / pinctrl-u300.c
blobf931e65aba3a47051df623a1c146fb5cf9a4c758
1 /*
2 * Driver for the U300 pin controller
3 *
4 * Based on the original U300 padmux functions
5 * Copyright (C) 2009-2011 ST-Ericsson AB
6 * Author: Martin Persson <martin.persson@stericsson.com>
7 * Author: Linus Walleij <linus.walleij@linaro.org>
8 *
9 * The DB3350 design and control registers are oriented around pads rather than
10 * pins, so we enumerate the pads we can mux rather than actual pins. The pads
11 * are connected to different pins in different packaging types, so it would
12 * be confusing.
13 */
14 #include <linux/init.h>
15 #include <linux/module.h>
16 #include <linux/platform_device.h>
17 #include <linux/io.h>
18 #include <linux/slab.h>
19 #include <linux/err.h>
20 #include <linux/pinctrl/pinctrl.h>
21 #include <linux/pinctrl/pinmux.h>
22 #include <linux/pinctrl/pinconf.h>
23 #include <linux/pinctrl/pinconf-generic.h>
24 #include "pinctrl-coh901.h"
25
26 /*
27 * Register definitions for the U300 Padmux control registers in the
28 * system controller
29 */
30
31 /* PAD MUX Control register 1 (LOW) 16bit (R/W) */
32 #define U300_SYSCON_PMC1LR 0x007C
33 #define U300_SYSCON_PMC1LR_MASK 0xFFFF
34 #define U300_SYSCON_PMC1LR_CDI_MASK 0xC000
35 #define U300_SYSCON_PMC1LR_CDI_CDI 0x0000
36 #define U300_SYSCON_PMC1LR_CDI_EMIF 0x4000
37 /* For BS335 */
38 #define U300_SYSCON_PMC1LR_CDI_CDI2 0x8000
39 #define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO 0xC000
40 /* For BS365 */
41 #define U300_SYSCON_PMC1LR_CDI_GPIO 0x8000
42 #define U300_SYSCON_PMC1LR_CDI_WCDMA 0xC000
43 /* Common defs */
44 #define U300_SYSCON_PMC1LR_PDI_MASK 0x3000
45 #define U300_SYSCON_PMC1LR_PDI_PDI 0x0000
46 #define U300_SYSCON_PMC1LR_PDI_EGG 0x1000
47 #define U300_SYSCON_PMC1LR_PDI_WCDMA 0x3000
48 #define U300_SYSCON_PMC1LR_MMCSD_MASK 0x0C00
49 #define U300_SYSCON_PMC1LR_MMCSD_MMCSD 0x0000
50 #define U300_SYSCON_PMC1LR_MMCSD_MSPRO 0x0400
51 #define U300_SYSCON_PMC1LR_MMCSD_DSP 0x0800
52 #define U300_SYSCON_PMC1LR_MMCSD_WCDMA 0x0C00
53 #define U300_SYSCON_PMC1LR_ETM_MASK 0x0300
54 #define U300_SYSCON_PMC1LR_ETM_ACC 0x0000
55 #define U300_SYSCON_PMC1LR_ETM_APP 0x0100
56 #define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK 0x00C0
57 #define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC 0x0000
58 #define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF 0x0040
59 #define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM 0x0080
60 #define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB 0x00C0
61 #define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK 0x0030
62 #define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC 0x0000
63 #define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF 0x0010
64 #define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM 0x0020
65 #define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI 0x0030
66 #define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK 0x000C
67 #define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC 0x0000
68 #define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF 0x0004
69 #define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM 0x0008
70 #define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI 0x000C
71 #define U300_SYSCON_PMC1LR_EMIF_1_MASK 0x0003
72 #define U300_SYSCON_PMC1LR_EMIF_1_STATIC 0x0000
73 #define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0 0x0001
74 #define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1 0x0002
75 #define U300_SYSCON_PMC1LR_EMIF_1 0x0003
76 /* PAD MUX Control register 2 (HIGH) 16bit (R/W) */
77 #define U300_SYSCON_PMC1HR 0x007E
78 #define U300_SYSCON_PMC1HR_MASK 0xFFFF
79 #define U300_SYSCON_PMC1HR_MISC_2_MASK 0xC000
80 #define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO 0x0000
81 #define U300_SYSCON_PMC1HR_MISC_2_MSPRO 0x4000
82 #define U300_SYSCON_PMC1HR_MISC_2_DSP 0x8000
83 #define U300_SYSCON_PMC1HR_MISC_2_AAIF 0xC000
84 #define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK 0x3000
85 #define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO 0x0000
86 #define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF 0x1000
87 #define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP 0x2000
88 #define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF 0x3000
89 #define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK 0x0C00
90 #define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO 0x0000
91 #define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC 0x0400
92 #define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP 0x0800
93 #define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF 0x0C00
94 #define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK 0x0300
95 #define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO 0x0000
96 #define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI 0x0100
97 #define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF 0x0300
98 #define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK 0x00C0
99 #define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO 0x0000
100 #define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI 0x0040
101 #define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF 0x00C0
102 #define U300_SYSCON_PMC1HR_APP_SPI_2_MASK 0x0030
103 #define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO 0x0000
104 #define U300_SYSCON_PMC1HR_APP_SPI_2_SPI 0x0010
105 #define U300_SYSCON_PMC1HR_APP_SPI_2_DSP 0x0020
106 #define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF 0x0030
107 #define U300_SYSCON_PMC1HR_APP_UART0_2_MASK 0x000C
108 #define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO 0x0000
109 #define U300_SYSCON_PMC1HR_APP_UART0_2_UART0 0x0004
110 #define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS 0x0008
111 #define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF 0x000C
112 #define U300_SYSCON_PMC1HR_APP_UART0_1_MASK 0x0003
113 #define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO 0x0000
114 #define U300_SYSCON_PMC1HR_APP_UART0_1_UART0 0x0001
115 #define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF 0x0003
116 /* Padmux 2 control */
117 #define U300_SYSCON_PMC2R 0x100
118 #define U300_SYSCON_PMC2R_APP_MISC_0_MASK 0x00C0
119 #define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO 0x0000
120 #define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM 0x0040
121 #define U300_SYSCON_PMC2R_APP_MISC_0_MMC 0x0080
122 #define U300_SYSCON_PMC2R_APP_MISC_0_CDI2 0x00C0
123 #define U300_SYSCON_PMC2R_APP_MISC_1_MASK 0x0300
124 #define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO 0x0000
125 #define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM 0x0100
126 #define U300_SYSCON_PMC2R_APP_MISC_1_MMC 0x0200
127 #define U300_SYSCON_PMC2R_APP_MISC_1_CDI2 0x0300
128 #define U300_SYSCON_PMC2R_APP_MISC_2_MASK 0x0C00
129 #define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO 0x0000
130 #define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM 0x0400
131 #define U300_SYSCON_PMC2R_APP_MISC_2_MMC 0x0800
132 #define U300_SYSCON_PMC2R_APP_MISC_2_CDI2 0x0C00
133 #define U300_SYSCON_PMC2R_APP_MISC_3_MASK 0x3000
134 #define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO 0x0000
135 #define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM 0x1000
136 #define U300_SYSCON_PMC2R_APP_MISC_3_MMC 0x2000
137 #define U300_SYSCON_PMC2R_APP_MISC_3_CDI2 0x3000
138 #define U300_SYSCON_PMC2R_APP_MISC_4_MASK 0xC000
139 #define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO 0x0000
140 #define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM 0x4000
141 #define U300_SYSCON_PMC2R_APP_MISC_4_MMC 0x8000
142 #define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO 0xC000
143 /* TODO: More SYSCON registers missing */
144 #define U300_SYSCON_PMC3R 0x10C
145 #define U300_SYSCON_PMC3R_APP_MISC_11_MASK 0xC000
146 #define U300_SYSCON_PMC3R_APP_MISC_11_SPI 0x4000
147 #define U300_SYSCON_PMC3R_APP_MISC_10_MASK 0x3000
148 #define U300_SYSCON_PMC3R_APP_MISC_10_SPI 0x1000
149 /* TODO: Missing other configs */
150 #define U300_SYSCON_PMC4R 0x168
151 #define U300_SYSCON_PMC4R_APP_MISC_12_MASK 0x0003
152 #define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO 0x0000
153 #define U300_SYSCON_PMC4R_APP_MISC_13_MASK 0x000C
154 #define U300_SYSCON_PMC4R_APP_MISC_13_CDI 0x0000
155 #define U300_SYSCON_PMC4R_APP_MISC_13_SMIA 0x0004
156 #define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2 0x0008
157 #define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO 0x000C
158 #define U300_SYSCON_PMC4R_APP_MISC_14_MASK 0x0030
159 #define U300_SYSCON_PMC4R_APP_MISC_14_CDI 0x0000
160 #define U300_SYSCON_PMC4R_APP_MISC_14_SMIA 0x0010
161 #define U300_SYSCON_PMC4R_APP_MISC_14_CDI2 0x0020
162 #define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO 0x0030
163 #define U300_SYSCON_PMC4R_APP_MISC_16_MASK 0x0300
164 #define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13 0x0000
165 #define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS 0x0100
166 #define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N 0x0200
167
168 #define DRIVER_NAME "pinctrl-u300"
169
170 /*
171 * The DB3350 has 467 pads, I have enumerated the pads clockwise around the
172 * edges of the silicon, finger by finger. LTCORNER upper left is pad 0.
173 * Data taken from the PadRing chart, arranged like this:
174 *
175 * 0 ..... 104
176 * 466 105
177 * . .
178 * . .
179 * 358 224
180 * 357 .... 225
181 */
182 #define U300_NUM_PADS 467
183
184 /* Pad names for the pinmux subsystem */
185 static const struct pinctrl_pin_desc u300_pads[] = {
186 /* Pads along the top edge of the chip */
187 PINCTRL_PIN(0, "P PAD VDD 28"),
188 PINCTRL_PIN(1, "P PAD GND 28"),
189 PINCTRL_PIN(2, "PO SIM RST N"),
190 PINCTRL_PIN(3, "VSSIO 25"),
191 PINCTRL_PIN(4, "VSSA ADDA ESDSUB"),
192 PINCTRL_PIN(5, "PWR VSSCOMMON"),
193 PINCTRL_PIN(6, "PI ADC I1 POS"),
194 PINCTRL_PIN(7, "PI ADC I1 NEG"),
195 PINCTRL_PIN(8, "PWR VSSAD0"),
196 PINCTRL_PIN(9, "PWR VCCAD0"),
197 PINCTRL_PIN(10, "PI ADC Q1 NEG"),
198 PINCTRL_PIN(11, "PI ADC Q1 POS"),
199 PINCTRL_PIN(12, "PWR VDDAD"),
200 PINCTRL_PIN(13, "PWR GNDAD"),
201 PINCTRL_PIN(14, "PI ADC I2 POS"),
202 PINCTRL_PIN(15, "PI ADC I2 NEG"),
203 PINCTRL_PIN(16, "PWR VSSAD1"),
204 PINCTRL_PIN(17, "PWR VCCAD1"),
205 PINCTRL_PIN(18, "PI ADC Q2 NEG"),
206 PINCTRL_PIN(19, "PI ADC Q2 POS"),
207 PINCTRL_PIN(20, "VSSA ADDA ESDSUB"),
208 PINCTRL_PIN(21, "PWR VCCGPAD"),
209 PINCTRL_PIN(22, "PI TX POW"),
210 PINCTRL_PIN(23, "PWR VSSGPAD"),
211 PINCTRL_PIN(24, "PO DAC I POS"),
212 PINCTRL_PIN(25, "PO DAC I NEG"),
213 PINCTRL_PIN(26, "PO DAC Q POS"),
214 PINCTRL_PIN(27, "PO DAC Q NEG"),
215 PINCTRL_PIN(28, "PWR VSSDA"),
216 PINCTRL_PIN(29, "PWR VCCDA"),
217 PINCTRL_PIN(30, "VSSA ADDA ESDSUB"),
218 PINCTRL_PIN(31, "P PAD VDDIO 11"),
219 PINCTRL_PIN(32, "PI PLL 26 FILTVDD"),
220 PINCTRL_PIN(33, "PI PLL 26 VCONT"),
221 PINCTRL_PIN(34, "PWR AGNDPLL2V5 32 13"),
222 PINCTRL_PIN(35, "PWR AVDDPLL2V5 32 13"),
223 PINCTRL_PIN(36, "VDDA PLL ESD"),
224 PINCTRL_PIN(37, "VSSA PLL ESD"),
225 PINCTRL_PIN(38, "VSS PLL"),
226 PINCTRL_PIN(39, "VDDC PLL"),
227 PINCTRL_PIN(40, "PWR AGNDPLL2V5 26 60"),
228 PINCTRL_PIN(41, "PWR AVDDPLL2V5 26 60"),
229 PINCTRL_PIN(42, "PWR AVDDPLL2V5 26 208"),
230 PINCTRL_PIN(43, "PWR AGNDPLL2V5 26 208"),
231 PINCTRL_PIN(44, "PWR AVDDPLL2V5 13 208"),
232 PINCTRL_PIN(45, "PWR AGNDPLL2V5 13 208"),
233 PINCTRL_PIN(46, "P PAD VSSIO 11"),
234 PINCTRL_PIN(47, "P PAD VSSIO 12"),
235 PINCTRL_PIN(48, "PI POW RST N"),
236 PINCTRL_PIN(49, "VDDC IO"),
237 PINCTRL_PIN(50, "P PAD VDDIO 16"),
238 PINCTRL_PIN(51, "PO RF WCDMA EN 4"),
239 PINCTRL_PIN(52, "PO RF WCDMA EN 3"),
240 PINCTRL_PIN(53, "PO RF WCDMA EN 2"),
241 PINCTRL_PIN(54, "PO RF WCDMA EN 1"),
242 PINCTRL_PIN(55, "PO RF WCDMA EN 0"),
243 PINCTRL_PIN(56, "PO GSM PA ENABLE"),
244 PINCTRL_PIN(57, "PO RF DATA STRB"),
245 PINCTRL_PIN(58, "PO RF DATA2"),
246 PINCTRL_PIN(59, "PIO RF DATA1"),
247 PINCTRL_PIN(60, "PIO RF DATA0"),
248 PINCTRL_PIN(61, "P PAD VDD 11"),
249 PINCTRL_PIN(62, "P PAD GND 11"),
250 PINCTRL_PIN(63, "P PAD VSSIO 16"),
251 PINCTRL_PIN(64, "P PAD VDDIO 18"),
252 PINCTRL_PIN(65, "PO RF CTRL STRB2"),
253 PINCTRL_PIN(66, "PO RF CTRL STRB1"),
254 PINCTRL_PIN(67, "PO RF CTRL STRB0"),
255 PINCTRL_PIN(68, "PIO RF CTRL DATA"),
256 PINCTRL_PIN(69, "PO RF CTRL CLK"),
257 PINCTRL_PIN(70, "PO TX ADC STRB"),
258 PINCTRL_PIN(71, "PO ANT SW 2"),
259 PINCTRL_PIN(72, "PO ANT SW 3"),
260 PINCTRL_PIN(73, "PO ANT SW 0"),
261 PINCTRL_PIN(74, "PO ANT SW 1"),
262 PINCTRL_PIN(75, "PO M CLKRQ"),
263 PINCTRL_PIN(76, "PI M CLK"),
264 PINCTRL_PIN(77, "PI RTC CLK"),
265 PINCTRL_PIN(78, "P PAD VDD 8"),
266 PINCTRL_PIN(79, "P PAD GND 8"),
267 PINCTRL_PIN(80, "P PAD VSSIO 13"),
268 PINCTRL_PIN(81, "P PAD VDDIO 13"),
269 PINCTRL_PIN(82, "PO SYS 1 CLK"),
270 PINCTRL_PIN(83, "PO SYS 2 CLK"),
271 PINCTRL_PIN(84, "PO SYS 0 CLK"),
272 PINCTRL_PIN(85, "PI SYS 0 CLKRQ"),
273 PINCTRL_PIN(86, "PO PWR MNGT CTRL 1"),
274 PINCTRL_PIN(87, "PO PWR MNGT CTRL 0"),
275 PINCTRL_PIN(88, "PO RESOUT2 RST N"),
276 PINCTRL_PIN(89, "PO RESOUT1 RST N"),
277 PINCTRL_PIN(90, "PO RESOUT0 RST N"),
278 PINCTRL_PIN(91, "PI SERVICE N"),
279 PINCTRL_PIN(92, "P PAD VDD 29"),
280 PINCTRL_PIN(93, "P PAD GND 29"),
281 PINCTRL_PIN(94, "P PAD VSSIO 8"),
282 PINCTRL_PIN(95, "P PAD VDDIO 8"),
283 PINCTRL_PIN(96, "PI EXT IRQ1 N"),
284 PINCTRL_PIN(97, "PI EXT IRQ0 N"),
285 PINCTRL_PIN(98, "PIO DC ON"),
286 PINCTRL_PIN(99, "PIO ACC APP I2C DATA"),
287 PINCTRL_PIN(100, "PIO ACC APP I2C CLK"),
288 PINCTRL_PIN(101, "P PAD VDD 12"),
289 PINCTRL_PIN(102, "P PAD GND 12"),
290 PINCTRL_PIN(103, "P PAD VSSIO 14"),
291 PINCTRL_PIN(104, "P PAD VDDIO 14"),
292 /* Pads along the right edge of the chip */
293 PINCTRL_PIN(105, "PIO APP I2C1 DATA"),
294 PINCTRL_PIN(106, "PIO APP I2C1 CLK"),
295 PINCTRL_PIN(107, "PO KEY OUT0"),
296 PINCTRL_PIN(108, "PO KEY OUT1"),
297 PINCTRL_PIN(109, "PO KEY OUT2"),
298 PINCTRL_PIN(110, "PO KEY OUT3"),
299 PINCTRL_PIN(111, "PO KEY OUT4"),
300 PINCTRL_PIN(112, "PI KEY IN0"),
301 PINCTRL_PIN(113, "PI KEY IN1"),
302 PINCTRL_PIN(114, "PI KEY IN2"),
303 PINCTRL_PIN(115, "P PAD VDDIO 15"),
304 PINCTRL_PIN(116, "P PAD VSSIO 15"),
305 PINCTRL_PIN(117, "P PAD GND 13"),
306 PINCTRL_PIN(118, "P PAD VDD 13"),
307 PINCTRL_PIN(119, "PI KEY IN3"),
308 PINCTRL_PIN(120, "PI KEY IN4"),
309 PINCTRL_PIN(121, "PI KEY IN5"),
310 PINCTRL_PIN(122, "PIO APP PCM I2S1 DATA B"),
311 PINCTRL_PIN(123, "PIO APP PCM I2S1 DATA A"),
312 PINCTRL_PIN(124, "PIO APP PCM I2S1 WS"),
313 PINCTRL_PIN(125, "PIO APP PCM I2S1 CLK"),
314 PINCTRL_PIN(126, "PIO APP PCM I2S0 DATA B"),
315 PINCTRL_PIN(127, "PIO APP PCM I2S0 DATA A"),
316 PINCTRL_PIN(128, "PIO APP PCM I2S0 WS"),
317 PINCTRL_PIN(129, "PIO APP PCM I2S0 CLK"),
318 PINCTRL_PIN(130, "P PAD VDD 17"),
319 PINCTRL_PIN(131, "P PAD GND 17"),
320 PINCTRL_PIN(132, "P PAD VSSIO 19"),
321 PINCTRL_PIN(133, "P PAD VDDIO 19"),
322 PINCTRL_PIN(134, "UART0 RTS"),
323 PINCTRL_PIN(135, "UART0 CTS"),
324 PINCTRL_PIN(136, "UART0 TX"),
325 PINCTRL_PIN(137, "UART0 RX"),
326 PINCTRL_PIN(138, "PIO ACC SPI DO"),
327 PINCTRL_PIN(139, "PIO ACC SPI DI"),
328 PINCTRL_PIN(140, "PIO ACC SPI CS0 N"),
329 PINCTRL_PIN(141, "PIO ACC SPI CS1 N"),
330 PINCTRL_PIN(142, "PIO ACC SPI CS2 N"),
331 PINCTRL_PIN(143, "PIO ACC SPI CLK"),
332 PINCTRL_PIN(144, "PO PDI EXT RST N"),
333 PINCTRL_PIN(145, "P PAD VDDIO 22"),
334 PINCTRL_PIN(146, "P PAD VSSIO 22"),
335 PINCTRL_PIN(147, "P PAD GND 18"),
336 PINCTRL_PIN(148, "P PAD VDD 18"),
337 PINCTRL_PIN(149, "PIO PDI C0"),
338 PINCTRL_PIN(150, "PIO PDI C1"),
339 PINCTRL_PIN(151, "PIO PDI C2"),
340 PINCTRL_PIN(152, "PIO PDI C3"),
341 PINCTRL_PIN(153, "PIO PDI C4"),
342 PINCTRL_PIN(154, "PIO PDI C5"),
343 PINCTRL_PIN(155, "PIO PDI D0"),
344 PINCTRL_PIN(156, "PIO PDI D1"),
345 PINCTRL_PIN(157, "PIO PDI D2"),
346 PINCTRL_PIN(158, "PIO PDI D3"),
347 PINCTRL_PIN(159, "P PAD VDDIO 21"),
348 PINCTRL_PIN(160, "P PAD VSSIO 21"),
349 PINCTRL_PIN(161, "PIO PDI D4"),
350 PINCTRL_PIN(162, "PIO PDI D5"),
351 PINCTRL_PIN(163, "PIO PDI D6"),
352 PINCTRL_PIN(164, "PIO PDI D7"),
353 PINCTRL_PIN(165, "PIO MS INS"),
354 PINCTRL_PIN(166, "MMC DATA DIR LS"),
355 PINCTRL_PIN(167, "MMC DATA 3"),
356 PINCTRL_PIN(168, "MMC DATA 2"),
357 PINCTRL_PIN(169, "MMC DATA 1"),
358 PINCTRL_PIN(170, "MMC DATA 0"),
359 PINCTRL_PIN(171, "MMC CMD DIR LS"),
360 PINCTRL_PIN(172, "P PAD VDD 27"),
361 PINCTRL_PIN(173, "P PAD GND 27"),
362 PINCTRL_PIN(174, "P PAD VSSIO 20"),
363 PINCTRL_PIN(175, "P PAD VDDIO 20"),
364 PINCTRL_PIN(176, "MMC CMD"),
365 PINCTRL_PIN(177, "MMC CLK"),
366 PINCTRL_PIN(178, "PIO APP GPIO 14"),
367 PINCTRL_PIN(179, "PIO APP GPIO 13"),
368 PINCTRL_PIN(180, "PIO APP GPIO 11"),
369 PINCTRL_PIN(181, "PIO APP GPIO 25"),
370 PINCTRL_PIN(182, "PIO APP GPIO 24"),
371 PINCTRL_PIN(183, "PIO APP GPIO 23"),
372 PINCTRL_PIN(184, "PIO APP GPIO 22"),
373 PINCTRL_PIN(185, "PIO APP GPIO 21"),
374 PINCTRL_PIN(186, "PIO APP GPIO 20"),
375 PINCTRL_PIN(187, "P PAD VDD 19"),
376 PINCTRL_PIN(188, "P PAD GND 19"),
377 PINCTRL_PIN(189, "P PAD VSSIO 23"),
378 PINCTRL_PIN(190, "P PAD VDDIO 23"),
379 PINCTRL_PIN(191, "PIO APP GPIO 19"),
380 PINCTRL_PIN(192, "PIO APP GPIO 18"),
381 PINCTRL_PIN(193, "PIO APP GPIO 17"),
382 PINCTRL_PIN(194, "PIO APP GPIO 16"),
383 PINCTRL_PIN(195, "PI CI D1"),
384 PINCTRL_PIN(196, "PI CI D0"),
385 PINCTRL_PIN(197, "PI CI HSYNC"),
386 PINCTRL_PIN(198, "PI CI VSYNC"),
387 PINCTRL_PIN(199, "PI CI EXT CLK"),
388 PINCTRL_PIN(200, "PO CI EXT RST N"),
389 PINCTRL_PIN(201, "P PAD VSSIO 43"),
390 PINCTRL_PIN(202, "P PAD VDDIO 43"),
391 PINCTRL_PIN(203, "PI CI D6"),
392 PINCTRL_PIN(204, "PI CI D7"),
393 PINCTRL_PIN(205, "PI CI D2"),
394 PINCTRL_PIN(206, "PI CI D3"),
395 PINCTRL_PIN(207, "PI CI D4"),
396 PINCTRL_PIN(208, "PI CI D5"),
397 PINCTRL_PIN(209, "PI CI D8"),
398 PINCTRL_PIN(210, "PI CI D9"),
399 PINCTRL_PIN(211, "P PAD VDD 20"),
400 PINCTRL_PIN(212, "P PAD GND 20"),
401 PINCTRL_PIN(213, "P PAD VSSIO 24"),
402 PINCTRL_PIN(214, "P PAD VDDIO 24"),
403 PINCTRL_PIN(215, "P PAD VDDIO 26"),
404 PINCTRL_PIN(216, "PO EMIF 1 A26"),
405 PINCTRL_PIN(217, "PO EMIF 1 A25"),
406 PINCTRL_PIN(218, "P PAD VSSIO 26"),
407 PINCTRL_PIN(219, "PO EMIF 1 A24"),
408 PINCTRL_PIN(220, "PO EMIF 1 A23"),
409 /* Pads along the bottom edge of the chip */
410 PINCTRL_PIN(221, "PO EMIF 1 A22"),
411 PINCTRL_PIN(222, "PO EMIF 1 A21"),
412 PINCTRL_PIN(223, "P PAD VDD 21"),
413 PINCTRL_PIN(224, "P PAD GND 21"),
414 PINCTRL_PIN(225, "P PAD VSSIO 27"),
415 PINCTRL_PIN(226, "P PAD VDDIO 27"),
416 PINCTRL_PIN(227, "PO EMIF 1 A20"),
417 PINCTRL_PIN(228, "PO EMIF 1 A19"),
418 PINCTRL_PIN(229, "PO EMIF 1 A18"),
419 PINCTRL_PIN(230, "PO EMIF 1 A17"),
420 PINCTRL_PIN(231, "P PAD VDDIO 28"),
421 PINCTRL_PIN(232, "P PAD VSSIO 28"),
422 PINCTRL_PIN(233, "PO EMIF 1 A16"),
423 PINCTRL_PIN(234, "PIO EMIF 1 D15"),
424 PINCTRL_PIN(235, "PO EMIF 1 A15"),
425 PINCTRL_PIN(236, "PIO EMIF 1 D14"),
426 PINCTRL_PIN(237, "P PAD VDD 22"),
427 PINCTRL_PIN(238, "P PAD GND 22"),
428 PINCTRL_PIN(239, "P PAD VSSIO 29"),
429 PINCTRL_PIN(240, "P PAD VDDIO 29"),
430 PINCTRL_PIN(241, "PO EMIF 1 A14"),
431 PINCTRL_PIN(242, "PIO EMIF 1 D13"),
432 PINCTRL_PIN(243, "PO EMIF 1 A13"),
433 PINCTRL_PIN(244, "PIO EMIF 1 D12"),
434 PINCTRL_PIN(245, "P PAD VSSIO 30"),
435 PINCTRL_PIN(246, "P PAD VDDIO 30"),
436 PINCTRL_PIN(247, "PO EMIF 1 A12"),
437 PINCTRL_PIN(248, "PIO EMIF 1 D11"),
438 PINCTRL_PIN(249, "PO EMIF 1 A11"),
439 PINCTRL_PIN(250, "PIO EMIF 1 D10"),
440 PINCTRL_PIN(251, "P PAD VSSIO 31"),
441 PINCTRL_PIN(252, "P PAD VDDIO 31"),
442 PINCTRL_PIN(253, "PO EMIF 1 A10"),
443 PINCTRL_PIN(254, "PIO EMIF 1 D09"),
444 PINCTRL_PIN(255, "PO EMIF 1 A09"),
445 PINCTRL_PIN(256, "P PAD VDDIO 32"),
446 PINCTRL_PIN(257, "P PAD VSSIO 32"),
447 PINCTRL_PIN(258, "P PAD GND 24"),
448 PINCTRL_PIN(259, "P PAD VDD 24"),
449 PINCTRL_PIN(260, "PIO EMIF 1 D08"),
450 PINCTRL_PIN(261, "PO EMIF 1 A08"),
451 PINCTRL_PIN(262, "PIO EMIF 1 D07"),
452 PINCTRL_PIN(263, "PO EMIF 1 A07"),
453 PINCTRL_PIN(264, "P PAD VDDIO 33"),
454 PINCTRL_PIN(265, "P PAD VSSIO 33"),
455 PINCTRL_PIN(266, "PIO EMIF 1 D06"),
456 PINCTRL_PIN(267, "PO EMIF 1 A06"),
457 PINCTRL_PIN(268, "PIO EMIF 1 D05"),
458 PINCTRL_PIN(269, "PO EMIF 1 A05"),
459 PINCTRL_PIN(270, "P PAD VDDIO 34"),
460 PINCTRL_PIN(271, "P PAD VSSIO 34"),
461 PINCTRL_PIN(272, "PIO EMIF 1 D04"),
462 PINCTRL_PIN(273, "PO EMIF 1 A04"),
463 PINCTRL_PIN(274, "PIO EMIF 1 D03"),
464 PINCTRL_PIN(275, "PO EMIF 1 A03"),
465 PINCTRL_PIN(276, "P PAD VDDIO 35"),
466 PINCTRL_PIN(277, "P PAD VSSIO 35"),
467 PINCTRL_PIN(278, "P PAD GND 23"),
468 PINCTRL_PIN(279, "P PAD VDD 23"),
469 PINCTRL_PIN(280, "PIO EMIF 1 D02"),
470 PINCTRL_PIN(281, "PO EMIF 1 A02"),
471 PINCTRL_PIN(282, "PIO EMIF 1 D01"),
472 PINCTRL_PIN(283, "PO EMIF 1 A01"),
473 PINCTRL_PIN(284, "P PAD VDDIO 36"),
474 PINCTRL_PIN(285, "P PAD VSSIO 36"),
475 PINCTRL_PIN(286, "PIO EMIF 1 D00"),
476 PINCTRL_PIN(287, "PO EMIF 1 BE1 N"),
477 PINCTRL_PIN(288, "PO EMIF 1 BE0 N"),
478 PINCTRL_PIN(289, "PO EMIF 1 ADV N"),
479 PINCTRL_PIN(290, "P PAD VDDIO 37"),
480 PINCTRL_PIN(291, "P PAD VSSIO 37"),
481 PINCTRL_PIN(292, "PO EMIF 1 SD CKE0"),
482 PINCTRL_PIN(293, "PO EMIF 1 OE N"),
483 PINCTRL_PIN(294, "PO EMIF 1 WE N"),
484 PINCTRL_PIN(295, "P PAD VDDIO 38"),
485 PINCTRL_PIN(296, "P PAD VSSIO 38"),
486 PINCTRL_PIN(297, "PO EMIF 1 CLK"),
487 PINCTRL_PIN(298, "PIO EMIF 1 SD CLK"),
488 PINCTRL_PIN(299, "P PAD VSSIO 45 (not bonded)"),
489 PINCTRL_PIN(300, "P PAD VDDIO 42"),
490 PINCTRL_PIN(301, "P PAD VSSIO 42"),
491 PINCTRL_PIN(302, "P PAD GND 31"),
492 PINCTRL_PIN(303, "P PAD VDD 31"),
493 PINCTRL_PIN(304, "PI EMIF 1 RET CLK"),
494 PINCTRL_PIN(305, "PI EMIF 1 WAIT N"),
495 PINCTRL_PIN(306, "PI EMIF 1 NFIF READY"),
496 PINCTRL_PIN(307, "PO EMIF 1 SD CKE1"),
497 PINCTRL_PIN(308, "PO EMIF 1 CS3 N"),
498 PINCTRL_PIN(309, "P PAD VDD 25"),
499 PINCTRL_PIN(310, "P PAD GND 25"),
500 PINCTRL_PIN(311, "P PAD VSSIO 39"),
501 PINCTRL_PIN(312, "P PAD VDDIO 39"),
502 PINCTRL_PIN(313, "PO EMIF 1 CS2 N"),
503 PINCTRL_PIN(314, "PO EMIF 1 CS1 N"),
504 PINCTRL_PIN(315, "PO EMIF 1 CS0 N"),
505 PINCTRL_PIN(316, "PO ETM TRACE PKT0"),
506 PINCTRL_PIN(317, "PO ETM TRACE PKT1"),
507 PINCTRL_PIN(318, "PO ETM TRACE PKT2"),
508 PINCTRL_PIN(319, "P PAD VDD 30"),
509 PINCTRL_PIN(320, "P PAD GND 30"),
510 PINCTRL_PIN(321, "P PAD VSSIO 44"),
511 PINCTRL_PIN(322, "P PAD VDDIO 44"),
512 PINCTRL_PIN(323, "PO ETM TRACE PKT3"),
513 PINCTRL_PIN(324, "PO ETM TRACE PKT4"),
514 PINCTRL_PIN(325, "PO ETM TRACE PKT5"),
515 PINCTRL_PIN(326, "PO ETM TRACE PKT6"),
516 PINCTRL_PIN(327, "PO ETM TRACE PKT7"),
517 PINCTRL_PIN(328, "PO ETM PIPE STAT0"),
518 PINCTRL_PIN(329, "P PAD VDD 26"),
519 PINCTRL_PIN(330, "P PAD GND 26"),
520 PINCTRL_PIN(331, "P PAD VSSIO 40"),
521 PINCTRL_PIN(332, "P PAD VDDIO 40"),
522 PINCTRL_PIN(333, "PO ETM PIPE STAT1"),
523 PINCTRL_PIN(334, "PO ETM PIPE STAT2"),
524 PINCTRL_PIN(335, "PO ETM TRACE CLK"),
525 PINCTRL_PIN(336, "PO ETM TRACE SYNC"),
526 PINCTRL_PIN(337, "PIO ACC GPIO 33"),
527 PINCTRL_PIN(338, "PIO ACC GPIO 32"),
528 PINCTRL_PIN(339, "PIO ACC GPIO 30"),
529 PINCTRL_PIN(340, "PIO ACC GPIO 29"),
530 PINCTRL_PIN(341, "P PAD VDDIO 17"),
531 PINCTRL_PIN(342, "P PAD VSSIO 17"),
532 PINCTRL_PIN(343, "P PAD GND 15"),
533 PINCTRL_PIN(344, "P PAD VDD 15"),
534 PINCTRL_PIN(345, "PIO ACC GPIO 28"),
535 PINCTRL_PIN(346, "PIO ACC GPIO 27"),
536 PINCTRL_PIN(347, "PIO ACC GPIO 16"),
537 PINCTRL_PIN(348, "PI TAP TMS"),
538 PINCTRL_PIN(349, "PI TAP TDI"),
539 PINCTRL_PIN(350, "PO TAP TDO"),
540 PINCTRL_PIN(351, "PI TAP RST N"),
541 /* Pads along the left edge of the chip */
542 PINCTRL_PIN(352, "PI EMU MODE 0"),
543 PINCTRL_PIN(353, "PO TAP RET CLK"),
544 PINCTRL_PIN(354, "PI TAP CLK"),
545 PINCTRL_PIN(355, "PO EMIF 0 SD CS N"),
546 PINCTRL_PIN(356, "PO EMIF 0 SD CAS N"),
547 PINCTRL_PIN(357, "PO EMIF 0 SD WE N"),
548 PINCTRL_PIN(358, "P PAD VDDIO 1"),
549 PINCTRL_PIN(359, "P PAD VSSIO 1"),
550 PINCTRL_PIN(360, "P PAD GND 1"),
551 PINCTRL_PIN(361, "P PAD VDD 1"),
552 PINCTRL_PIN(362, "PO EMIF 0 SD CKE"),
553 PINCTRL_PIN(363, "PO EMIF 0 SD DQML"),
554 PINCTRL_PIN(364, "PO EMIF 0 SD DQMU"),
555 PINCTRL_PIN(365, "PO EMIF 0 SD RAS N"),
556 PINCTRL_PIN(366, "PIO EMIF 0 D15"),
557 PINCTRL_PIN(367, "PO EMIF 0 A15"),
558 PINCTRL_PIN(368, "PIO EMIF 0 D14"),
559 PINCTRL_PIN(369, "PO EMIF 0 A14"),
560 PINCTRL_PIN(370, "PIO EMIF 0 D13"),
561 PINCTRL_PIN(371, "PO EMIF 0 A13"),
562 PINCTRL_PIN(372, "P PAD VDDIO 2"),
563 PINCTRL_PIN(373, "P PAD VSSIO 2"),
564 PINCTRL_PIN(374, "P PAD GND 2"),
565 PINCTRL_PIN(375, "P PAD VDD 2"),
566 PINCTRL_PIN(376, "PIO EMIF 0 D12"),
567 PINCTRL_PIN(377, "PO EMIF 0 A12"),
568 PINCTRL_PIN(378, "PIO EMIF 0 D11"),
569 PINCTRL_PIN(379, "PO EMIF 0 A11"),
570 PINCTRL_PIN(380, "PIO EMIF 0 D10"),
571 PINCTRL_PIN(381, "PO EMIF 0 A10"),
572 PINCTRL_PIN(382, "PIO EMIF 0 D09"),
573 PINCTRL_PIN(383, "PO EMIF 0 A09"),
574 PINCTRL_PIN(384, "PIO EMIF 0 D08"),
575 PINCTRL_PIN(385, "PO EMIF 0 A08"),
576 PINCTRL_PIN(386, "PIO EMIF 0 D07"),
577 PINCTRL_PIN(387, "PO EMIF 0 A07"),
578 PINCTRL_PIN(388, "P PAD VDDIO 3"),
579 PINCTRL_PIN(389, "P PAD VSSIO 3"),
580 PINCTRL_PIN(390, "P PAD GND 3"),
581 PINCTRL_PIN(391, "P PAD VDD 3"),
582 PINCTRL_PIN(392, "PO EFUSE RDOUT1"),
583 PINCTRL_PIN(393, "PIO EMIF 0 D06"),
584 PINCTRL_PIN(394, "PO EMIF 0 A06"),
585 PINCTRL_PIN(395, "PIO EMIF 0 D05"),
586 PINCTRL_PIN(396, "PO EMIF 0 A05"),
587 PINCTRL_PIN(397, "PIO EMIF 0 D04"),
588 PINCTRL_PIN(398, "PO EMIF 0 A04"),
589 PINCTRL_PIN(399, "A PADS/A VDDCO1v82v5 GND 80U SF LIN VDDCO AF"),
590 PINCTRL_PIN(400, "PWR VDDCO AF"),
591 PINCTRL_PIN(401, "PWR EFUSE HV1"),
592 PINCTRL_PIN(402, "P PAD VSSIO 4"),
593 PINCTRL_PIN(403, "P PAD VDDIO 4"),
594 PINCTRL_PIN(404, "P PAD GND 4"),
595 PINCTRL_PIN(405, "P PAD VDD 4"),
596 PINCTRL_PIN(406, "PIO EMIF 0 D03"),
597 PINCTRL_PIN(407, "PO EMIF 0 A03"),
598 PINCTRL_PIN(408, "PWR EFUSE HV2"),
599 PINCTRL_PIN(409, "PWR EFUSE HV3"),
600 PINCTRL_PIN(410, "PIO EMIF 0 D02"),
601 PINCTRL_PIN(411, "PO EMIF 0 A02"),
602 PINCTRL_PIN(412, "PIO EMIF 0 D01"),
603 PINCTRL_PIN(413, "P PAD VDDIO 5"),
604 PINCTRL_PIN(414, "P PAD VSSIO 5"),
605 PINCTRL_PIN(415, "P PAD GND 5"),
606 PINCTRL_PIN(416, "P PAD VDD 5"),
607 PINCTRL_PIN(417, "PO EMIF 0 A01"),
608 PINCTRL_PIN(418, "PIO EMIF 0 D00"),
609 PINCTRL_PIN(419, "IF 0 SD CLK"),
610 PINCTRL_PIN(420, "APP SPI CLK"),
611 PINCTRL_PIN(421, "APP SPI DO"),
612 PINCTRL_PIN(422, "APP SPI DI"),
613 PINCTRL_PIN(423, "APP SPI CS0"),
614 PINCTRL_PIN(424, "APP SPI CS1"),
615 PINCTRL_PIN(425, "APP SPI CS2"),
616 PINCTRL_PIN(426, "PIO APP GPIO 10"),
617 PINCTRL_PIN(427, "P PAD VDDIO 41"),
618 PINCTRL_PIN(428, "P PAD VSSIO 41"),
619 PINCTRL_PIN(429, "P PAD GND 6"),
620 PINCTRL_PIN(430, "P PAD VDD 6"),
621 PINCTRL_PIN(431, "PIO ACC SDIO0 CMD"),
622 PINCTRL_PIN(432, "PIO ACC SDIO0 CK"),
623 PINCTRL_PIN(433, "PIO ACC SDIO0 D3"),
624 PINCTRL_PIN(434, "PIO ACC SDIO0 D2"),
625 PINCTRL_PIN(435, "PIO ACC SDIO0 D1"),
626 PINCTRL_PIN(436, "PIO ACC SDIO0 D0"),
627 PINCTRL_PIN(437, "PIO USB PU"),
628 PINCTRL_PIN(438, "PIO USB SP"),
629 PINCTRL_PIN(439, "PIO USB DAT VP"),
630 PINCTRL_PIN(440, "PIO USB SE0 VM"),
631 PINCTRL_PIN(441, "PIO USB OE"),
632 PINCTRL_PIN(442, "PIO USB SUSP"),
633 PINCTRL_PIN(443, "P PAD VSSIO 6"),
634 PINCTRL_PIN(444, "P PAD VDDIO 6"),
635 PINCTRL_PIN(445, "PIO USB PUEN"),
636 PINCTRL_PIN(446, "PIO ACC UART0 RX"),
637 PINCTRL_PIN(447, "PIO ACC UART0 TX"),
638 PINCTRL_PIN(448, "PIO ACC UART0 CTS"),
639 PINCTRL_PIN(449, "PIO ACC UART0 RTS"),
640 PINCTRL_PIN(450, "PIO ACC UART3 RX"),
641 PINCTRL_PIN(451, "PIO ACC UART3 TX"),
642 PINCTRL_PIN(452, "PIO ACC UART3 CTS"),
643 PINCTRL_PIN(453, "PIO ACC UART3 RTS"),
644 PINCTRL_PIN(454, "PIO ACC IRDA TX"),
645 PINCTRL_PIN(455, "P PAD VDDIO 7"),
646 PINCTRL_PIN(456, "P PAD VSSIO 7"),
647 PINCTRL_PIN(457, "P PAD GND 7"),
648 PINCTRL_PIN(458, "P PAD VDD 7"),
649 PINCTRL_PIN(459, "PIO ACC IRDA RX"),
650 PINCTRL_PIN(460, "PIO ACC PCM I2S CLK"),
651 PINCTRL_PIN(461, "PIO ACC PCM I2S WS"),
652 PINCTRL_PIN(462, "PIO ACC PCM I2S DATA A"),
653 PINCTRL_PIN(463, "PIO ACC PCM I2S DATA B"),
654 PINCTRL_PIN(464, "PO SIM CLK"),
655 PINCTRL_PIN(465, "PIO ACC IRDA SD"),
656 PINCTRL_PIN(466, "PIO SIM DATA"),
657 };
658
659 /**
660 * @dev: a pointer back to containing device
661 * @virtbase: the offset to the controller in virtual memory
662 */
663 struct u300_pmx {
664 struct device *dev;
665 struct pinctrl_dev *pctl;
666 void __iomem *virtbase;
667 };
668
669 /**
670 * u300_pmx_registers - the array of registers read/written for each pinmux
671 * shunt setting
672 */
673 const u32 u300_pmx_registers[] = {
674 U300_SYSCON_PMC1LR,
675 U300_SYSCON_PMC1HR,
676 U300_SYSCON_PMC2R,
677 U300_SYSCON_PMC3R,
678 U300_SYSCON_PMC4R,
679 };
680
681 /**
682 * struct u300_pin_group - describes a U300 pin group
683 * @name: the name of this specific pin group
684 * @pins: an array of discrete physical pins used in this group, taken
685 * from the driver-local pin enumeration space
686 * @num_pins: the number of pins in this group array, i.e. the number of
687 * elements in .pins so we can iterate over that array
688 */
689 struct u300_pin_group {
690 const char *name;
691 const unsigned int *pins;
692 const unsigned num_pins;
693 };
694
695 /**
696 * struct pmx_onmask - mask bits to enable/disable padmux
697 * @mask: mask bits to disable
698 * @val: mask bits to enable
699 *
700 * onmask lazy dog:
701 * onmask = {
702 * {"PMC1LR" mask, "PMC1LR" value},
703 * {"PMC1HR" mask, "PMC1HR" value},
704 * {"PMC2R" mask, "PMC2R" value},
705 * {"PMC3R" mask, "PMC3R" value},
706 * {"PMC4R" mask, "PMC4R" value}
707 * }
708 */
709 struct u300_pmx_mask {
710 u16 mask;
711 u16 bits;
712 };
713
714 /* The chip power pins are VDD, GND, VDDIO and VSSIO */
715 static const unsigned power_pins[] = { 0, 1, 3, 31, 46, 47, 49, 50, 61, 62, 63,
716 64, 78, 79, 80, 81, 92, 93, 94, 95, 101, 102, 103, 104, 115, 116, 117,
717 118, 130, 131, 132, 133, 145, 146, 147, 148, 159, 160, 172, 173, 174,
718 175, 187, 188, 189, 190, 201, 202, 211, 212, 213, 214, 215, 218, 223,
719 224, 225, 226, 231, 232, 237, 238, 239, 240, 245, 246, 251, 252, 256,
720 257, 258, 259, 264, 265, 270, 271, 276, 277, 278, 279, 284, 285, 290,
721 291, 295, 296, 299, 300, 301, 302, 303, 309, 310, 311, 312, 319, 320,
722 321, 322, 329, 330, 331, 332, 341, 342, 343, 344, 358, 359, 360, 361,
723 372, 373, 374, 375, 388, 389, 390, 391, 402, 403, 404, 405, 413, 414,
724 415, 416, 427, 428, 429, 430, 443, 444, 455, 456, 457, 458 };
725 static const unsigned emif0_pins[] = { 355, 356, 357, 362, 363, 364, 365, 366,
726 367, 368, 369, 370, 371, 376, 377, 378, 379, 380, 381, 382, 383, 384,
727 385, 386, 387, 393, 394, 395, 396, 397, 398, 406, 407, 410, 411, 412,
728 417, 418 };
729 static const unsigned emif1_pins[] = { 216, 217, 219, 220, 221, 222, 227, 228,
730 229, 230, 233, 234, 235, 236, 241, 242, 243, 244, 247, 248, 249, 250,
731 253, 254, 255, 260, 261, 262, 263, 266, 267, 268, 269, 272, 273, 274,
732 275, 280, 281, 282, 283, 286, 287, 288, 289, 292, 293, 294, 297, 298,
733 304, 305, 306, 307, 308, 313, 314, 315 };
734 static const unsigned uart0_pins[] = { 134, 135, 136, 137 };
735 static const unsigned mmc0_pins[] = { 166, 167, 168, 169, 170, 171, 176, 177 };
736 static const unsigned spi0_pins[] = { 420, 421, 422, 423, 424, 425 };
737
738 static const struct u300_pmx_mask emif0_mask[] = {
739 {0, 0},
740 {0, 0},
741 {0, 0},
742 {0, 0},
743 {0, 0},
744 };
745
746 static const struct u300_pmx_mask emif1_mask[] = {
747 /*
748 * This connects the SDRAM to CS2 and a NAND flash to
749 * CS0 on the EMIF.
750 */
751 {
752 U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK |
753 U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK |
754 U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK |
755 U300_SYSCON_PMC1LR_EMIF_1_MASK,
756 U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM |
757 U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC |
758 U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF |
759 U300_SYSCON_PMC1LR_EMIF_1_SDRAM0
760 },
761 {0, 0},
762 {0, 0},
763 {0, 0},
764 {0, 0},
765 };
766
767 static const struct u300_pmx_mask uart0_mask[] = {
768 {0, 0},
769 {
770 U300_SYSCON_PMC1HR_APP_UART0_1_MASK |
771 U300_SYSCON_PMC1HR_APP_UART0_2_MASK,
772 U300_SYSCON_PMC1HR_APP_UART0_1_UART0 |
773 U300_SYSCON_PMC1HR_APP_UART0_2_UART0
774 },
775 {0, 0},
776 {0, 0},
777 {0, 0},
778 };
779
780 static const struct u300_pmx_mask mmc0_mask[] = {
781 { U300_SYSCON_PMC1LR_MMCSD_MASK, U300_SYSCON_PMC1LR_MMCSD_MMCSD},
782 {0, 0},
783 {0, 0},
784 {0, 0},
785 { U300_SYSCON_PMC4R_APP_MISC_12_MASK,
786 U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO }
787 };
788
789 static const struct u300_pmx_mask spi0_mask[] = {
790 {0, 0},
791 {
792 U300_SYSCON_PMC1HR_APP_SPI_2_MASK |
793 U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK |
794 U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK,
795 U300_SYSCON_PMC1HR_APP_SPI_2_SPI |
796 U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI |
797 U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI
798 },
799 {0, 0},
800 {0, 0},
801 {0, 0}
802 };
803
804 static const struct u300_pin_group u300_pin_groups[] = {
805 {
806 .name = "powergrp",
807 .pins = power_pins,
808 .num_pins = ARRAY_SIZE(power_pins),
809 },
810 {
811 .name = "emif0grp",
812 .pins = emif0_pins,
813 .num_pins = ARRAY_SIZE(emif0_pins),
814 },
815 {
816 .name = "emif1grp",
817 .pins = emif1_pins,
818 .num_pins = ARRAY_SIZE(emif1_pins),
819 },
820 {
821 .name = "uart0grp",
822 .pins = uart0_pins,
823 .num_pins = ARRAY_SIZE(uart0_pins),
824 },
825 {
826 .name = "mmc0grp",
827 .pins = mmc0_pins,
828 .num_pins = ARRAY_SIZE(mmc0_pins),
829 },
830 {
831 .name = "spi0grp",
832 .pins = spi0_pins,
833 .num_pins = ARRAY_SIZE(spi0_pins),
834 },
835 };
836
837 static int u300_get_groups_count(struct pinctrl_dev *pctldev)
838 {
839 return ARRAY_SIZE(u300_pin_groups);
840 }
841
842 static const char *u300_get_group_name(struct pinctrl_dev *pctldev,
843 unsigned selector)
844 {
845 return u300_pin_groups[selector].name;
846 }
847
848 static int u300_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
849 const unsigned **pins,
850 unsigned *num_pins)
851 {
852 *pins = u300_pin_groups[selector].pins;
853 *num_pins = u300_pin_groups[selector].num_pins;
854 return 0;
855 }
856
857 static void u300_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
858 unsigned offset)
859 {
860 seq_printf(s, " " DRIVER_NAME);
861 }
862
863 static const struct pinctrl_ops u300_pctrl_ops = {
864 .get_groups_count = u300_get_groups_count,
865 .get_group_name = u300_get_group_name,
866 .get_group_pins = u300_get_group_pins,
867 .pin_dbg_show = u300_pin_dbg_show,
868 };
869
870 /*
871 * Here we define the available functions and their corresponding pin groups
872 */
873
874 /**
875 * struct u300_pmx_func - describes U300 pinmux functions
876 * @name: the name of this specific function
877 * @groups: corresponding pin groups
878 * @onmask: bits to set to enable this when doing pin muxing
879 */
880 struct u300_pmx_func {
881 const char *name;
882 const char * const *groups;
883 const unsigned num_groups;
884 const struct u300_pmx_mask *mask;
885 };
886
887 static const char * const powergrps[] = { "powergrp" };
888 static const char * const emif0grps[] = { "emif0grp" };
889 static const char * const emif1grps[] = { "emif1grp" };
890 static const char * const uart0grps[] = { "uart0grp" };
891 static const char * const mmc0grps[] = { "mmc0grp" };
892 static const char * const spi0grps[] = { "spi0grp" };
893
894 static const struct u300_pmx_func u300_pmx_functions[] = {
895 {
896 .name = "power",
897 .groups = powergrps,
898 .num_groups = ARRAY_SIZE(powergrps),
899 /* Mask is N/A */
900 },
901 {
902 .name = "emif0",
903 .groups = emif0grps,
904 .num_groups = ARRAY_SIZE(emif0grps),
905 .mask = emif0_mask,
906 },
907 {
908 .name = "emif1",
909 .groups = emif1grps,
910 .num_groups = ARRAY_SIZE(emif1grps),
911 .mask = emif1_mask,
912 },
913 {
914 .name = "uart0",
915 .groups = uart0grps,
916 .num_groups = ARRAY_SIZE(uart0grps),
917 .mask = uart0_mask,
918 },
919 {
920 .name = "mmc0",
921 .groups = mmc0grps,
922 .num_groups = ARRAY_SIZE(mmc0grps),
923 .mask = mmc0_mask,
924 },
925 {
926 .name = "spi0",
927 .groups = spi0grps,
928 .num_groups = ARRAY_SIZE(spi0grps),
929 .mask = spi0_mask,
930 },
931 };
932
933 static void u300_pmx_endisable(struct u300_pmx *upmx, unsigned selector,
934 bool enable)
935 {
936 u16 regval, val, mask;
937 int i;
938 const struct u300_pmx_mask *upmx_mask;
939
940 upmx_mask = u300_pmx_functions[selector].mask;
941 for (i = 0; i < ARRAY_SIZE(u300_pmx_registers); i++) {
942 if (enable)
943 val = upmx_mask->bits;
944 else
945 val = 0;
946
947 mask = upmx_mask->mask;
948 if (mask != 0) {
949 regval = readw(upmx->virtbase + u300_pmx_registers[i]);
950 regval &= ~mask;
951 regval |= val;
952 writew(regval, upmx->virtbase + u300_pmx_registers[i]);
953 }
954 upmx_mask++;
955 }
956 }
957
958 static int u300_pmx_set_mux(struct pinctrl_dev *pctldev, unsigned selector,
959 unsigned group)
960 {
961 struct u300_pmx *upmx;
962
963 /* There is nothing to do with the power pins */
964 if (selector == 0)
965 return 0;
966
967 upmx = pinctrl_dev_get_drvdata(pctldev);
968 u300_pmx_endisable(upmx, selector, true);
969
970 return 0;
971 }
972
973 static int u300_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
974 {
975 return ARRAY_SIZE(u300_pmx_functions);
976 }
977
978 static const char *u300_pmx_get_func_name(struct pinctrl_dev *pctldev,
979 unsigned selector)
980 {
981 return u300_pmx_functions[selector].name;
982 }
983
984 static int u300_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
985 const char * const **groups,
986 unsigned * const num_groups)
987 {
988 *groups = u300_pmx_functions[selector].groups;
989 *num_groups = u300_pmx_functions[selector].num_groups;
990 return 0;
991 }
992
993 static const struct pinmux_ops u300_pmx_ops = {
994 .get_functions_count = u300_pmx_get_funcs_count,
995 .get_function_name = u300_pmx_get_func_name,
996 .get_function_groups = u300_pmx_get_groups,
997 .set_mux = u300_pmx_set_mux,
998 };
999
1000 static int u300_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
1001 unsigned long *config)
1002 {
1003 struct pinctrl_gpio_range *range =
1004 pinctrl_find_gpio_range_from_pin(pctldev, pin);
1005
1006 /* We get config for those pins we CAN get it for and that's it */
1007 if (!range)
1008 return -ENOTSUPP;
1009
1010 return u300_gpio_config_get(range->gc,
1011 (pin - range->pin_base + range->base),
1012 config);
1013 }
1014
1015 static int u300_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
1016 unsigned long *configs, unsigned num_configs)
1017 {
1018 struct pinctrl_gpio_range *range =
1019 pinctrl_find_gpio_range_from_pin(pctldev, pin);
1020 int ret, i;
1021
1022 if (!range)
1023 return -EINVAL;
1024
1025 for (i = 0; i < num_configs; i++) {
1026 /* Note: none of these configurations take any argument */
1027 ret = u300_gpio_config_set(range->gc,
1028 (pin - range->pin_base + range->base),
1029 pinconf_to_config_param(configs[i]));
1030 if (ret)
1031 return ret;
1032 } /* for each config */
1033
1034 return 0;
1035 }
1036
1037 static const struct pinconf_ops u300_pconf_ops = {
1038 .is_generic = true,
1039 .pin_config_get = u300_pin_config_get,
1040 .pin_config_set = u300_pin_config_set,
1041 };
1042
1043 static struct pinctrl_desc u300_pmx_desc = {
1044 .name = DRIVER_NAME,
1045 .pins = u300_pads,
1046 .npins = ARRAY_SIZE(u300_pads),
1047 .pctlops = &u300_pctrl_ops,
1048 .pmxops = &u300_pmx_ops,
1049 .confops = &u300_pconf_ops,
1050 .owner = THIS_MODULE,
1051 };
1052
1053 static int u300_pmx_probe(struct platform_device *pdev)
1054 {
1055 struct u300_pmx *upmx;
1056 struct resource *res;
1057
1058 /* Create state holders etc for this driver */
1059 upmx = devm_kzalloc(&pdev->dev, sizeof(*upmx), GFP_KERNEL);
1060 if (!upmx)
1061 return -ENOMEM;
1062
1063 upmx->dev = &pdev->dev;
1064
1065 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1066 upmx->virtbase = devm_ioremap_resource(&pdev->dev, res);
1067 if (IS_ERR(upmx->virtbase))
1068 return PTR_ERR(upmx->virtbase);
1069
1070 upmx->pctl = pinctrl_register(&u300_pmx_desc, &pdev->dev, upmx);
1071 if (!upmx->pctl) {
1072 dev_err(&pdev->dev, "could not register U300 pinmux driver\n");
1073 return -EINVAL;
1074 }
1075
1076 platform_set_drvdata(pdev, upmx);
1077
1078 dev_info(&pdev->dev, "initialized U300 pin control driver\n");
1079
1080 return 0;
1081 }
1082
1083 static int u300_pmx_remove(struct platform_device *pdev)
1084 {
1085 struct u300_pmx *upmx = platform_get_drvdata(pdev);
1086
1087 pinctrl_unregister(upmx->pctl);
1088
1089 return 0;
1090 }
1091
1092 static const struct of_device_id u300_pinctrl_match[] = {
1093 { .compatible = "stericsson,pinctrl-u300" },
1094 {},
1095 };
1096
1097
1098 static struct platform_driver u300_pmx_driver = {
1099 .driver = {
1100 .name = DRIVER_NAME,
1101 .of_match_table = u300_pinctrl_match,
1102 },
1103 .probe = u300_pmx_probe,
1104 .remove = u300_pmx_remove,
1105 };
1106
1107 static int __init u300_pmx_init(void)
1108 {
1109 return platform_driver_register(&u300_pmx_driver);
1110 }
1111 arch_initcall(u300_pmx_init);
1112
1113 static void __exit u300_pmx_exit(void)
1114 {
1115 platform_driver_unregister(&u300_pmx_driver);
1116 }
1117 module_exit(u300_pmx_exit);
1118
1119 MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
1120 MODULE_DESCRIPTION("U300 pin control driver");
1121 MODULE_LICENSE("GPL v2");
Linux with added FPC-III support