gro: Allow tunnel stacking in the case of FOU/GUE
[linux/fpc-iii.git] / drivers / power / rx51_battery.c
blobac6206951d5842235cdf167a69bca0f93c6b5bd3
1 /*
2 * Nokia RX-51 battery driver
4 * Copyright (C) 2012 Pali Rohár <pali.rohar@gmail.com>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License along
17 * with this program; if not, write to the Free Software Foundation, Inc.,
18 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
21 #include <linux/module.h>
22 #include <linux/param.h>
23 #include <linux/platform_device.h>
24 #include <linux/power_supply.h>
25 #include <linux/slab.h>
26 #include <linux/i2c/twl4030-madc.h>
27 #include <linux/iio/consumer.h>
28 #include <linux/of.h>
30 struct rx51_device_info {
31 struct device *dev;
32 struct power_supply *bat;
33 struct power_supply_desc bat_desc;
34 struct iio_channel *channel_temp;
35 struct iio_channel *channel_bsi;
36 struct iio_channel *channel_vbat;
40 * Read ADCIN channel value, code copied from maemo kernel
42 static int rx51_battery_read_adc(struct iio_channel *channel)
44 int val, err;
45 err = iio_read_channel_average_raw(channel, &val);
46 if (err < 0)
47 return err;
48 return val;
52 * Read ADCIN channel 12 (voltage) and convert RAW value to micro voltage
53 * This conversion formula was extracted from maemo program bsi-read
55 static int rx51_battery_read_voltage(struct rx51_device_info *di)
57 int voltage = rx51_battery_read_adc(di->channel_vbat);
59 if (voltage < 0) {
60 dev_err(di->dev, "Could not read ADC: %d\n", voltage);
61 return voltage;
64 return 1000 * (10000 * voltage / 1705);
68 * Temperature look-up tables
69 * TEMP = (1/(t1 + 1/298) - 273.15)
70 * Where t1 = (1/B) * ln((RAW_ADC_U * 2.5)/(R * I * 255))
71 * Formula is based on experimental data, RX-51 CAL data, maemo program bme
72 * and formula from da9052 driver with values R = 100, B = 3380, I = 0.00671
76 * Table1 (temperature for first 25 RAW values)
77 * Usage: TEMP = rx51_temp_table1[RAW]
78 * RAW is between 1 and 24
79 * TEMP is between 201 C and 55 C
81 static u8 rx51_temp_table1[] = {
82 255, 201, 159, 138, 124, 114, 106, 99, 94, 89, 85, 82, 78, 75,
83 73, 70, 68, 66, 64, 62, 61, 59, 57, 56, 55
87 * Table2 (lowest RAW value for temperature)
88 * Usage: RAW = rx51_temp_table2[TEMP-rx51_temp_table2_first]
89 * TEMP is between 53 C and -32 C
90 * RAW is between 25 and 993
92 #define rx51_temp_table2_first 53
93 static u16 rx51_temp_table2[] = {
94 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 39,
95 40, 41, 43, 44, 46, 48, 49, 51, 53, 55, 57, 59, 61, 64,
96 66, 69, 71, 74, 77, 80, 83, 86, 90, 94, 97, 101, 106, 110,
97 115, 119, 125, 130, 136, 141, 148, 154, 161, 168, 176, 184, 202, 211,
98 221, 231, 242, 254, 266, 279, 293, 308, 323, 340, 357, 375, 395, 415,
99 437, 460, 485, 511, 539, 568, 600, 633, 669, 706, 747, 790, 836, 885,
100 937, 993, 1024
104 * Read ADCIN channel 0 (battery temp) and convert value to tenths of Celsius
105 * Use Temperature look-up tables for conversation
107 static int rx51_battery_read_temperature(struct rx51_device_info *di)
109 int min = 0;
110 int max = ARRAY_SIZE(rx51_temp_table2) - 1;
111 int raw = rx51_battery_read_adc(di->channel_temp);
113 if (raw < 0)
114 dev_err(di->dev, "Could not read ADC: %d\n", raw);
116 /* Zero and negative values are undefined */
117 if (raw <= 0)
118 return INT_MAX;
120 /* ADC channels are 10 bit, higher value are undefined */
121 if (raw >= (1 << 10))
122 return INT_MIN;
124 /* First check for temperature in first direct table */
125 if (raw < ARRAY_SIZE(rx51_temp_table1))
126 return rx51_temp_table1[raw] * 10;
128 /* Binary search RAW value in second inverse table */
129 while (max - min > 1) {
130 int mid = (max + min) / 2;
131 if (rx51_temp_table2[mid] <= raw)
132 min = mid;
133 else if (rx51_temp_table2[mid] > raw)
134 max = mid;
135 if (rx51_temp_table2[mid] == raw)
136 break;
139 return (rx51_temp_table2_first - min) * 10;
143 * Read ADCIN channel 4 (BSI) and convert RAW value to micro Ah
144 * This conversion formula was extracted from maemo program bsi-read
146 static int rx51_battery_read_capacity(struct rx51_device_info *di)
148 int capacity = rx51_battery_read_adc(di->channel_bsi);
150 if (capacity < 0) {
151 dev_err(di->dev, "Could not read ADC: %d\n", capacity);
152 return capacity;
155 return 1280 * (1200 * capacity)/(1024 - capacity);
159 * Return power_supply property
161 static int rx51_battery_get_property(struct power_supply *psy,
162 enum power_supply_property psp,
163 union power_supply_propval *val)
165 struct rx51_device_info *di = power_supply_get_drvdata(psy);
167 switch (psp) {
168 case POWER_SUPPLY_PROP_TECHNOLOGY:
169 val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
170 break;
171 case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
172 val->intval = 4200000;
173 break;
174 case POWER_SUPPLY_PROP_PRESENT:
175 val->intval = rx51_battery_read_voltage(di) ? 1 : 0;
176 break;
177 case POWER_SUPPLY_PROP_VOLTAGE_NOW:
178 val->intval = rx51_battery_read_voltage(di);
179 break;
180 case POWER_SUPPLY_PROP_TEMP:
181 val->intval = rx51_battery_read_temperature(di);
182 break;
183 case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
184 val->intval = rx51_battery_read_capacity(di);
185 break;
186 default:
187 return -EINVAL;
190 if (val->intval == INT_MAX || val->intval == INT_MIN)
191 return -EINVAL;
193 return 0;
196 static enum power_supply_property rx51_battery_props[] = {
197 POWER_SUPPLY_PROP_TECHNOLOGY,
198 POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
199 POWER_SUPPLY_PROP_PRESENT,
200 POWER_SUPPLY_PROP_VOLTAGE_NOW,
201 POWER_SUPPLY_PROP_TEMP,
202 POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
205 static int rx51_battery_probe(struct platform_device *pdev)
207 struct power_supply_config psy_cfg = {};
208 struct rx51_device_info *di;
209 int ret;
211 di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
212 if (!di)
213 return -ENOMEM;
215 platform_set_drvdata(pdev, di);
217 di->dev = &pdev->dev;
218 di->bat_desc.name = dev_name(&pdev->dev);
219 di->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
220 di->bat_desc.properties = rx51_battery_props;
221 di->bat_desc.num_properties = ARRAY_SIZE(rx51_battery_props);
222 di->bat_desc.get_property = rx51_battery_get_property;
224 psy_cfg.drv_data = di;
226 di->channel_temp = iio_channel_get(di->dev, "temp");
227 if (IS_ERR(di->channel_temp)) {
228 ret = PTR_ERR(di->channel_temp);
229 goto error;
232 di->channel_bsi = iio_channel_get(di->dev, "bsi");
233 if (IS_ERR(di->channel_bsi)) {
234 ret = PTR_ERR(di->channel_bsi);
235 goto error_channel_temp;
238 di->channel_vbat = iio_channel_get(di->dev, "vbat");
239 if (IS_ERR(di->channel_vbat)) {
240 ret = PTR_ERR(di->channel_vbat);
241 goto error_channel_bsi;
244 di->bat = power_supply_register(di->dev, &di->bat_desc, &psy_cfg);
245 if (IS_ERR(di->bat)) {
246 ret = PTR_ERR(di->bat);
247 goto error_channel_vbat;
250 return 0;
252 error_channel_vbat:
253 iio_channel_release(di->channel_vbat);
254 error_channel_bsi:
255 iio_channel_release(di->channel_bsi);
256 error_channel_temp:
257 iio_channel_release(di->channel_temp);
258 error:
260 return ret;
263 static int rx51_battery_remove(struct platform_device *pdev)
265 struct rx51_device_info *di = platform_get_drvdata(pdev);
267 power_supply_unregister(di->bat);
269 iio_channel_release(di->channel_vbat);
270 iio_channel_release(di->channel_bsi);
271 iio_channel_release(di->channel_temp);
273 return 0;
276 #ifdef CONFIG_OF
277 static const struct of_device_id n900_battery_of_match[] = {
278 {.compatible = "nokia,n900-battery", },
279 { },
281 MODULE_DEVICE_TABLE(of, n900_battery_of_match);
282 #endif
284 static struct platform_driver rx51_battery_driver = {
285 .probe = rx51_battery_probe,
286 .remove = rx51_battery_remove,
287 .driver = {
288 .name = "rx51-battery",
289 .of_match_table = of_match_ptr(n900_battery_of_match),
292 module_platform_driver(rx51_battery_driver);
294 MODULE_ALIAS("platform:rx51-battery");
295 MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
296 MODULE_DESCRIPTION("Nokia RX-51 battery driver");
297 MODULE_LICENSE("GPL");