gro: Allow tunnel stacking in the case of FOU/GUE
[linux/fpc-iii.git] / drivers / uio / uio_netx.c
blob4c345db8b016e8adab57c49e2f19992113ec41b8
1 /*
2 * UIO driver for Hilscher NetX based fieldbus cards (cifX, comX).
3 * See http://www.hilscher.com for details.
5 * (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
6 * (C) 2008 Manuel Traut <manut@linutronix.de>
8 * Licensed under GPL version 2 only.
12 #include <linux/device.h>
13 #include <linux/io.h>
14 #include <linux/module.h>
15 #include <linux/pci.h>
16 #include <linux/slab.h>
17 #include <linux/uio_driver.h>
19 #define PCI_VENDOR_ID_HILSCHER 0x15CF
20 #define PCI_DEVICE_ID_HILSCHER_NETX 0x0000
21 #define PCI_DEVICE_ID_HILSCHER_NETPLC 0x0010
22 #define PCI_SUBDEVICE_ID_NETPLC_RAM 0x0000
23 #define PCI_SUBDEVICE_ID_NETPLC_FLASH 0x0001
24 #define PCI_SUBDEVICE_ID_NXSB_PCA 0x3235
25 #define PCI_SUBDEVICE_ID_NXPCA 0x3335
27 #define DPM_HOST_INT_EN0 0xfff0
28 #define DPM_HOST_INT_STAT0 0xffe0
30 #define DPM_HOST_INT_MASK 0xe600ffff
31 #define DPM_HOST_INT_GLOBAL_EN 0x80000000
33 static irqreturn_t netx_handler(int irq, struct uio_info *dev_info)
35 void __iomem *int_enable_reg = dev_info->mem[0].internal_addr
36 + DPM_HOST_INT_EN0;
37 void __iomem *int_status_reg = dev_info->mem[0].internal_addr
38 + DPM_HOST_INT_STAT0;
40 /* Is one of our interrupts enabled and active ? */
41 if (!(ioread32(int_enable_reg) & ioread32(int_status_reg)
42 & DPM_HOST_INT_MASK))
43 return IRQ_NONE;
45 /* Disable interrupt */
46 iowrite32(ioread32(int_enable_reg) & ~DPM_HOST_INT_GLOBAL_EN,
47 int_enable_reg);
48 return IRQ_HANDLED;
51 static int netx_pci_probe(struct pci_dev *dev,
52 const struct pci_device_id *id)
54 struct uio_info *info;
55 int bar;
57 info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
58 if (!info)
59 return -ENOMEM;
61 if (pci_enable_device(dev))
62 goto out_free;
64 if (pci_request_regions(dev, "netx"))
65 goto out_disable;
67 switch (id->device) {
68 case PCI_DEVICE_ID_HILSCHER_NETX:
69 bar = 0;
70 info->name = "netx";
71 break;
72 case PCI_DEVICE_ID_HILSCHER_NETPLC:
73 bar = 0;
74 info->name = "netplc";
75 break;
76 default:
77 bar = 2;
78 info->name = "netx_plx";
81 /* BAR0 or 2 points to the card's dual port memory */
82 info->mem[0].addr = pci_resource_start(dev, bar);
83 if (!info->mem[0].addr)
84 goto out_release;
85 info->mem[0].internal_addr = ioremap(pci_resource_start(dev, bar),
86 pci_resource_len(dev, bar));
88 if (!info->mem[0].internal_addr)
89 goto out_release;
91 info->mem[0].size = pci_resource_len(dev, bar);
92 info->mem[0].memtype = UIO_MEM_PHYS;
93 info->irq = dev->irq;
94 info->irq_flags = IRQF_SHARED;
95 info->handler = netx_handler;
96 info->version = "0.0.1";
98 /* Make sure all interrupts are disabled */
99 iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
101 if (uio_register_device(&dev->dev, info))
102 goto out_unmap;
104 pci_set_drvdata(dev, info);
105 dev_info(&dev->dev, "Found %s card, registered UIO device.\n",
106 info->name);
108 return 0;
110 out_unmap:
111 iounmap(info->mem[0].internal_addr);
112 out_release:
113 pci_release_regions(dev);
114 out_disable:
115 pci_disable_device(dev);
116 out_free:
117 kfree(info);
118 return -ENODEV;
121 static void netx_pci_remove(struct pci_dev *dev)
123 struct uio_info *info = pci_get_drvdata(dev);
125 /* Disable all interrupts */
126 iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
127 uio_unregister_device(info);
128 pci_release_regions(dev);
129 pci_disable_device(dev);
130 iounmap(info->mem[0].internal_addr);
132 kfree(info);
135 static struct pci_device_id netx_pci_ids[] = {
137 .vendor = PCI_VENDOR_ID_HILSCHER,
138 .device = PCI_DEVICE_ID_HILSCHER_NETX,
139 .subvendor = 0,
140 .subdevice = 0,
143 .vendor = PCI_VENDOR_ID_HILSCHER,
144 .device = PCI_DEVICE_ID_HILSCHER_NETPLC,
145 .subvendor = PCI_VENDOR_ID_HILSCHER,
146 .subdevice = PCI_SUBDEVICE_ID_NETPLC_RAM,
149 .vendor = PCI_VENDOR_ID_HILSCHER,
150 .device = PCI_DEVICE_ID_HILSCHER_NETPLC,
151 .subvendor = PCI_VENDOR_ID_HILSCHER,
152 .subdevice = PCI_SUBDEVICE_ID_NETPLC_FLASH,
155 .vendor = PCI_VENDOR_ID_PLX,
156 .device = PCI_DEVICE_ID_PLX_9030,
157 .subvendor = PCI_VENDOR_ID_PLX,
158 .subdevice = PCI_SUBDEVICE_ID_NXSB_PCA,
161 .vendor = PCI_VENDOR_ID_PLX,
162 .device = PCI_DEVICE_ID_PLX_9030,
163 .subvendor = PCI_VENDOR_ID_PLX,
164 .subdevice = PCI_SUBDEVICE_ID_NXPCA,
166 { 0, }
169 static struct pci_driver netx_pci_driver = {
170 .name = "netx",
171 .id_table = netx_pci_ids,
172 .probe = netx_pci_probe,
173 .remove = netx_pci_remove,
176 module_pci_driver(netx_pci_driver);
177 MODULE_DEVICE_TABLE(pci, netx_pci_ids);
178 MODULE_LICENSE("GPL v2");
179 MODULE_AUTHOR("Hans J. Koch, Manuel Traut");