gro: Allow tunnel stacking in the case of FOU/GUE
[linux/fpc-iii.git] / fs / jbd / recovery.c
bloba748fe21465abd1a6d8d478fc1fd93b4d9ce335a
1 /*
2 * linux/fs/jbd/recovery.c
4 * Written by Stephen C. Tweedie <sct@redhat.com>, 1999
6 * Copyright 1999-2000 Red Hat Software --- All Rights Reserved
8 * This file is part of the Linux kernel and is made available under
9 * the terms of the GNU General Public License, version 2, or at your
10 * option, any later version, incorporated herein by reference.
12 * Journal recovery routines for the generic filesystem journaling code;
13 * part of the ext2fs journaling system.
16 #ifndef __KERNEL__
17 #include "jfs_user.h"
18 #else
19 #include <linux/time.h>
20 #include <linux/fs.h>
21 #include <linux/jbd.h>
22 #include <linux/errno.h>
23 #include <linux/blkdev.h>
24 #endif
27 * Maintain information about the progress of the recovery job, so that
28 * the different passes can carry information between them.
30 struct recovery_info
32 tid_t start_transaction;
33 tid_t end_transaction;
35 int nr_replays;
36 int nr_revokes;
37 int nr_revoke_hits;
40 enum passtype {PASS_SCAN, PASS_REVOKE, PASS_REPLAY};
41 static int do_one_pass(journal_t *journal,
42 struct recovery_info *info, enum passtype pass);
43 static int scan_revoke_records(journal_t *, struct buffer_head *,
44 tid_t, struct recovery_info *);
46 #ifdef __KERNEL__
48 /* Release readahead buffers after use */
49 static void journal_brelse_array(struct buffer_head *b[], int n)
51 while (--n >= 0)
52 brelse (b[n]);
57 * When reading from the journal, we are going through the block device
58 * layer directly and so there is no readahead being done for us. We
59 * need to implement any readahead ourselves if we want it to happen at
60 * all. Recovery is basically one long sequential read, so make sure we
61 * do the IO in reasonably large chunks.
63 * This is not so critical that we need to be enormously clever about
64 * the readahead size, though. 128K is a purely arbitrary, good-enough
65 * fixed value.
68 #define MAXBUF 8
69 static int do_readahead(journal_t *journal, unsigned int start)
71 int err;
72 unsigned int max, nbufs, next;
73 unsigned int blocknr;
74 struct buffer_head *bh;
76 struct buffer_head * bufs[MAXBUF];
78 /* Do up to 128K of readahead */
79 max = start + (128 * 1024 / journal->j_blocksize);
80 if (max > journal->j_maxlen)
81 max = journal->j_maxlen;
83 /* Do the readahead itself. We'll submit MAXBUF buffer_heads at
84 * a time to the block device IO layer. */
86 nbufs = 0;
88 for (next = start; next < max; next++) {
89 err = journal_bmap(journal, next, &blocknr);
91 if (err) {
92 printk (KERN_ERR "JBD: bad block at offset %u\n",
93 next);
94 goto failed;
97 bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize);
98 if (!bh) {
99 err = -ENOMEM;
100 goto failed;
103 if (!buffer_uptodate(bh) && !buffer_locked(bh)) {
104 bufs[nbufs++] = bh;
105 if (nbufs == MAXBUF) {
106 ll_rw_block(READ, nbufs, bufs);
107 journal_brelse_array(bufs, nbufs);
108 nbufs = 0;
110 } else
111 brelse(bh);
114 if (nbufs)
115 ll_rw_block(READ, nbufs, bufs);
116 err = 0;
118 failed:
119 if (nbufs)
120 journal_brelse_array(bufs, nbufs);
121 return err;
124 #endif /* __KERNEL__ */
128 * Read a block from the journal
131 static int jread(struct buffer_head **bhp, journal_t *journal,
132 unsigned int offset)
134 int err;
135 unsigned int blocknr;
136 struct buffer_head *bh;
138 *bhp = NULL;
140 if (offset >= journal->j_maxlen) {
141 printk(KERN_ERR "JBD: corrupted journal superblock\n");
142 return -EIO;
145 err = journal_bmap(journal, offset, &blocknr);
147 if (err) {
148 printk (KERN_ERR "JBD: bad block at offset %u\n",
149 offset);
150 return err;
153 bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize);
154 if (!bh)
155 return -ENOMEM;
157 if (!buffer_uptodate(bh)) {
158 /* If this is a brand new buffer, start readahead.
159 Otherwise, we assume we are already reading it. */
160 if (!buffer_req(bh))
161 do_readahead(journal, offset);
162 wait_on_buffer(bh);
165 if (!buffer_uptodate(bh)) {
166 printk (KERN_ERR "JBD: Failed to read block at offset %u\n",
167 offset);
168 brelse(bh);
169 return -EIO;
172 *bhp = bh;
173 return 0;
178 * Count the number of in-use tags in a journal descriptor block.
181 static int count_tags(struct buffer_head *bh, int size)
183 char * tagp;
184 journal_block_tag_t * tag;
185 int nr = 0;
187 tagp = &bh->b_data[sizeof(journal_header_t)];
189 while ((tagp - bh->b_data + sizeof(journal_block_tag_t)) <= size) {
190 tag = (journal_block_tag_t *) tagp;
192 nr++;
193 tagp += sizeof(journal_block_tag_t);
194 if (!(tag->t_flags & cpu_to_be32(JFS_FLAG_SAME_UUID)))
195 tagp += 16;
197 if (tag->t_flags & cpu_to_be32(JFS_FLAG_LAST_TAG))
198 break;
201 return nr;
205 /* Make sure we wrap around the log correctly! */
206 #define wrap(journal, var) \
207 do { \
208 if (var >= (journal)->j_last) \
209 var -= ((journal)->j_last - (journal)->j_first); \
210 } while (0)
213 * journal_recover - recovers a on-disk journal
214 * @journal: the journal to recover
216 * The primary function for recovering the log contents when mounting a
217 * journaled device.
219 * Recovery is done in three passes. In the first pass, we look for the
220 * end of the log. In the second, we assemble the list of revoke
221 * blocks. In the third and final pass, we replay any un-revoked blocks
222 * in the log.
224 int journal_recover(journal_t *journal)
226 int err, err2;
227 journal_superblock_t * sb;
229 struct recovery_info info;
231 memset(&info, 0, sizeof(info));
232 sb = journal->j_superblock;
235 * The journal superblock's s_start field (the current log head)
236 * is always zero if, and only if, the journal was cleanly
237 * unmounted.
240 if (!sb->s_start) {
241 jbd_debug(1, "No recovery required, last transaction %d\n",
242 be32_to_cpu(sb->s_sequence));
243 journal->j_transaction_sequence = be32_to_cpu(sb->s_sequence) + 1;
244 return 0;
247 err = do_one_pass(journal, &info, PASS_SCAN);
248 if (!err)
249 err = do_one_pass(journal, &info, PASS_REVOKE);
250 if (!err)
251 err = do_one_pass(journal, &info, PASS_REPLAY);
253 jbd_debug(1, "JBD: recovery, exit status %d, "
254 "recovered transactions %u to %u\n",
255 err, info.start_transaction, info.end_transaction);
256 jbd_debug(1, "JBD: Replayed %d and revoked %d/%d blocks\n",
257 info.nr_replays, info.nr_revoke_hits, info.nr_revokes);
259 /* Restart the log at the next transaction ID, thus invalidating
260 * any existing commit records in the log. */
261 journal->j_transaction_sequence = ++info.end_transaction;
263 journal_clear_revoke(journal);
264 err2 = sync_blockdev(journal->j_fs_dev);
265 if (!err)
266 err = err2;
267 /* Flush disk caches to get replayed data on the permanent storage */
268 if (journal->j_flags & JFS_BARRIER) {
269 err2 = blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL);
270 if (!err)
271 err = err2;
274 return err;
278 * journal_skip_recovery - Start journal and wipe exiting records
279 * @journal: journal to startup
281 * Locate any valid recovery information from the journal and set up the
282 * journal structures in memory to ignore it (presumably because the
283 * caller has evidence that it is out of date).
284 * This function does'nt appear to be exorted..
286 * We perform one pass over the journal to allow us to tell the user how
287 * much recovery information is being erased, and to let us initialise
288 * the journal transaction sequence numbers to the next unused ID.
290 int journal_skip_recovery(journal_t *journal)
292 int err;
293 struct recovery_info info;
295 memset (&info, 0, sizeof(info));
297 err = do_one_pass(journal, &info, PASS_SCAN);
299 if (err) {
300 printk(KERN_ERR "JBD: error %d scanning journal\n", err);
301 ++journal->j_transaction_sequence;
302 } else {
303 #ifdef CONFIG_JBD_DEBUG
304 int dropped = info.end_transaction -
305 be32_to_cpu(journal->j_superblock->s_sequence);
306 jbd_debug(1,
307 "JBD: ignoring %d transaction%s from the journal.\n",
308 dropped, (dropped == 1) ? "" : "s");
309 #endif
310 journal->j_transaction_sequence = ++info.end_transaction;
313 journal->j_tail = 0;
314 return err;
317 static int do_one_pass(journal_t *journal,
318 struct recovery_info *info, enum passtype pass)
320 unsigned int first_commit_ID, next_commit_ID;
321 unsigned int next_log_block;
322 int err, success = 0;
323 journal_superblock_t * sb;
324 journal_header_t * tmp;
325 struct buffer_head * bh;
326 unsigned int sequence;
327 int blocktype;
330 * First thing is to establish what we expect to find in the log
331 * (in terms of transaction IDs), and where (in terms of log
332 * block offsets): query the superblock.
335 sb = journal->j_superblock;
336 next_commit_ID = be32_to_cpu(sb->s_sequence);
337 next_log_block = be32_to_cpu(sb->s_start);
339 first_commit_ID = next_commit_ID;
340 if (pass == PASS_SCAN)
341 info->start_transaction = first_commit_ID;
343 jbd_debug(1, "Starting recovery pass %d\n", pass);
346 * Now we walk through the log, transaction by transaction,
347 * making sure that each transaction has a commit block in the
348 * expected place. Each complete transaction gets replayed back
349 * into the main filesystem.
352 while (1) {
353 int flags;
354 char * tagp;
355 journal_block_tag_t * tag;
356 struct buffer_head * obh;
357 struct buffer_head * nbh;
359 cond_resched();
361 /* If we already know where to stop the log traversal,
362 * check right now that we haven't gone past the end of
363 * the log. */
365 if (pass != PASS_SCAN)
366 if (tid_geq(next_commit_ID, info->end_transaction))
367 break;
369 jbd_debug(2, "Scanning for sequence ID %u at %u/%u\n",
370 next_commit_ID, next_log_block, journal->j_last);
372 /* Skip over each chunk of the transaction looking
373 * either the next descriptor block or the final commit
374 * record. */
376 jbd_debug(3, "JBD: checking block %u\n", next_log_block);
377 err = jread(&bh, journal, next_log_block);
378 if (err)
379 goto failed;
381 next_log_block++;
382 wrap(journal, next_log_block);
384 /* What kind of buffer is it?
386 * If it is a descriptor block, check that it has the
387 * expected sequence number. Otherwise, we're all done
388 * here. */
390 tmp = (journal_header_t *)bh->b_data;
392 if (tmp->h_magic != cpu_to_be32(JFS_MAGIC_NUMBER)) {
393 brelse(bh);
394 break;
397 blocktype = be32_to_cpu(tmp->h_blocktype);
398 sequence = be32_to_cpu(tmp->h_sequence);
399 jbd_debug(3, "Found magic %d, sequence %d\n",
400 blocktype, sequence);
402 if (sequence != next_commit_ID) {
403 brelse(bh);
404 break;
407 /* OK, we have a valid descriptor block which matches
408 * all of the sequence number checks. What are we going
409 * to do with it? That depends on the pass... */
411 switch(blocktype) {
412 case JFS_DESCRIPTOR_BLOCK:
413 /* If it is a valid descriptor block, replay it
414 * in pass REPLAY; otherwise, just skip over the
415 * blocks it describes. */
416 if (pass != PASS_REPLAY) {
417 next_log_block +=
418 count_tags(bh, journal->j_blocksize);
419 wrap(journal, next_log_block);
420 brelse(bh);
421 continue;
424 /* A descriptor block: we can now write all of
425 * the data blocks. Yay, useful work is finally
426 * getting done here! */
428 tagp = &bh->b_data[sizeof(journal_header_t)];
429 while ((tagp - bh->b_data +sizeof(journal_block_tag_t))
430 <= journal->j_blocksize) {
431 unsigned int io_block;
433 tag = (journal_block_tag_t *) tagp;
434 flags = be32_to_cpu(tag->t_flags);
436 io_block = next_log_block++;
437 wrap(journal, next_log_block);
438 err = jread(&obh, journal, io_block);
439 if (err) {
440 /* Recover what we can, but
441 * report failure at the end. */
442 success = err;
443 printk (KERN_ERR
444 "JBD: IO error %d recovering "
445 "block %u in log\n",
446 err, io_block);
447 } else {
448 unsigned int blocknr;
450 J_ASSERT(obh != NULL);
451 blocknr = be32_to_cpu(tag->t_blocknr);
453 /* If the block has been
454 * revoked, then we're all done
455 * here. */
456 if (journal_test_revoke
457 (journal, blocknr,
458 next_commit_ID)) {
459 brelse(obh);
460 ++info->nr_revoke_hits;
461 goto skip_write;
464 /* Find a buffer for the new
465 * data being restored */
466 nbh = __getblk(journal->j_fs_dev,
467 blocknr,
468 journal->j_blocksize);
469 if (nbh == NULL) {
470 printk(KERN_ERR
471 "JBD: Out of memory "
472 "during recovery.\n");
473 err = -ENOMEM;
474 brelse(bh);
475 brelse(obh);
476 goto failed;
479 lock_buffer(nbh);
480 memcpy(nbh->b_data, obh->b_data,
481 journal->j_blocksize);
482 if (flags & JFS_FLAG_ESCAPE) {
483 *((__be32 *)nbh->b_data) =
484 cpu_to_be32(JFS_MAGIC_NUMBER);
487 BUFFER_TRACE(nbh, "marking dirty");
488 set_buffer_uptodate(nbh);
489 mark_buffer_dirty(nbh);
490 BUFFER_TRACE(nbh, "marking uptodate");
491 ++info->nr_replays;
492 /* ll_rw_block(WRITE, 1, &nbh); */
493 unlock_buffer(nbh);
494 brelse(obh);
495 brelse(nbh);
498 skip_write:
499 tagp += sizeof(journal_block_tag_t);
500 if (!(flags & JFS_FLAG_SAME_UUID))
501 tagp += 16;
503 if (flags & JFS_FLAG_LAST_TAG)
504 break;
507 brelse(bh);
508 continue;
510 case JFS_COMMIT_BLOCK:
511 /* Found an expected commit block: not much to
512 * do other than move on to the next sequence
513 * number. */
514 brelse(bh);
515 next_commit_ID++;
516 continue;
518 case JFS_REVOKE_BLOCK:
519 /* If we aren't in the REVOKE pass, then we can
520 * just skip over this block. */
521 if (pass != PASS_REVOKE) {
522 brelse(bh);
523 continue;
526 err = scan_revoke_records(journal, bh,
527 next_commit_ID, info);
528 brelse(bh);
529 if (err)
530 goto failed;
531 continue;
533 default:
534 jbd_debug(3, "Unrecognised magic %d, end of scan.\n",
535 blocktype);
536 brelse(bh);
537 goto done;
541 done:
543 * We broke out of the log scan loop: either we came to the
544 * known end of the log or we found an unexpected block in the
545 * log. If the latter happened, then we know that the "current"
546 * transaction marks the end of the valid log.
549 if (pass == PASS_SCAN)
550 info->end_transaction = next_commit_ID;
551 else {
552 /* It's really bad news if different passes end up at
553 * different places (but possible due to IO errors). */
554 if (info->end_transaction != next_commit_ID) {
555 printk (KERN_ERR "JBD: recovery pass %d ended at "
556 "transaction %u, expected %u\n",
557 pass, next_commit_ID, info->end_transaction);
558 if (!success)
559 success = -EIO;
563 return success;
565 failed:
566 return err;
570 /* Scan a revoke record, marking all blocks mentioned as revoked. */
572 static int scan_revoke_records(journal_t *journal, struct buffer_head *bh,
573 tid_t sequence, struct recovery_info *info)
575 journal_revoke_header_t *header;
576 int offset, max;
578 header = (journal_revoke_header_t *) bh->b_data;
579 offset = sizeof(journal_revoke_header_t);
580 max = be32_to_cpu(header->r_count);
582 while (offset < max) {
583 unsigned int blocknr;
584 int err;
586 blocknr = be32_to_cpu(* ((__be32 *) (bh->b_data+offset)));
587 offset += 4;
588 err = journal_set_revoke(journal, blocknr, sequence);
589 if (err)
590 return err;
591 ++info->nr_revokes;
593 return 0;