arch/mips/au1000/pb1200/board_setup.c

   1 /*
   2  *
   3  * BRIEF MODULE DESCRIPTION
   4  *      Alchemy Pb1200/Db1200 board setup.
   5  *
   6  *  This program is free software; you can redistribute  it and/or modify it
   7  *  under  the terms of  the GNU General  Public License as published by the
   8  *  Free Software Foundation;  either version 2 of the  License, or (at your
   9  *  option) any later version.
  10  *
  11  *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
  12  *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
  13  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  14  *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
  15  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  16  *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
  17  *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  18  *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
  19  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  20  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  21  *
  22  *  You should have received a copy of the  GNU General Public License along
  23  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  24  *  675 Mass Ave, Cambridge, MA 02139, USA.
  25  */
  26 #include <linux/init.h>
  27 #include <linux/sched.h>
  28 #include <linux/ioport.h>
  29 #include <linux/mm.h>
  30 #include <linux/console.h>
  31 #include <linux/mc146818rtc.h>
  32 #include <linux/delay.h>
  33
  34 #if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
  35 #include <linux/ide.h>
  36 #endif
  37
  38 #include <asm/cpu.h>
  39 #include <asm/bootinfo.h>
  40 #include <asm/irq.h>
  41 #include <asm/mipsregs.h>
  42 #include <asm/reboot.h>
  43 #include <asm/pgtable.h>
  44
  45 #include <au1000.h>
  46 #include <au1xxx_dbdma.h>
  47 #include <prom.h>
  48
  49 #ifdef CONFIG_MIPS_PB1200
  50 #include <asm/mach-pb1x00/pb1200.h>
  51 #endif
  52
  53 #ifdef CONFIG_MIPS_DB1200
  54 #include <asm/mach-db1x00/db1200.h>
  55 #define PB1200_ETH_INT DB1200_ETH_INT
  56 #define PB1200_IDE_INT DB1200_IDE_INT
  57 #endif
  58
  59 extern void _board_init_irq(void);
  60 extern void (*board_init_irq)(void);
  61
  62 void board_reset(void)
  63 {
  64         bcsr->resets = 0;
  65         bcsr->system = 0;
  66 }
  67
  68 void __init board_setup(void)
  69 {
  70         char *argptr = NULL;
  71
  72 #if 0
  73         {
  74         u32 pin_func;
  75
  76         /* Enable PSC1 SYNC for AC97.  Normaly done in audio driver,
  77          * but it is board specific code, so put it here.
  78          */
  79         pin_func = au_readl(SYS_PINFUNC);
  80         au_sync();
  81         pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
  82         au_writel(pin_func, SYS_PINFUNC);
  83
  84         au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
  85         au_sync();
  86         }
  87 #endif
  88
  89 #if defined(CONFIG_I2C_AU1550)
  90         {
  91         u32 freq0, clksrc;
  92         u32 pin_func;
  93
  94         /* Select SMBUS in CPLD */
  95         bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
  96
  97         pin_func = au_readl(SYS_PINFUNC);
  98         au_sync();
  99         pin_func &= ~(3<<17 | 1<<4);
 100         /* Set GPIOs correctly */
 101         pin_func |= 2<<17;
 102         au_writel(pin_func, SYS_PINFUNC);
 103         au_sync();
 104
 105         /* The i2c driver depends on 50Mhz clock */
 106         freq0 = au_readl(SYS_FREQCTRL0);
 107         au_sync();
 108         freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
 109         freq0 |= (3<<SYS_FC_FRDIV1_BIT);
 110         /* 396Mhz / (3+1)*2 == 49.5Mhz */
 111         au_writel(freq0, SYS_FREQCTRL0);
 112         au_sync();
 113         freq0 |= SYS_FC_FE1;
 114         au_writel(freq0, SYS_FREQCTRL0);
 115         au_sync();
 116
 117         clksrc = au_readl(SYS_CLKSRC);
 118         au_sync();
 119         clksrc &= ~0x01f00000;
 120         /* bit 22 is EXTCLK0 for PSC0 */
 121         clksrc |= (0x3 << 22);
 122         au_writel(clksrc, SYS_CLKSRC);
 123         au_sync();
 124         }
 125 #endif
 126
 127 #ifdef CONFIG_FB_AU1200
 128         argptr = prom_getcmdline();
 129 #ifdef CONFIG_MIPS_PB1200
 130         strcat(argptr, " video=au1200fb:panel:bs");
 131 #endif
 132 #ifdef CONFIG_MIPS_DB1200
 133         strcat(argptr, " video=au1200fb:panel:bs");
 134 #endif
 135 #endif
 136
 137         /* The Pb1200 development board uses external MUX for PSC0 to
 138         support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
 139         */
 140 #ifdef CONFIG_I2C_AU1550
 141         bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
 142 #endif
 143         au_sync();
 144
 145 #ifdef CONFIG_MIPS_PB1200
 146         printk("AMD Alchemy Pb1200 Board\n");
 147 #endif
 148 #ifdef CONFIG_MIPS_DB1200
 149         printk("AMD Alchemy Db1200 Board\n");
 150 #endif
 151
 152         /* Setup Pb1200 External Interrupt Controller */
 153         board_init_irq = _board_init_irq;
 154 }
 155
 156 int
 157 board_au1200fb_panel(void)
 158 {
 159         BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
 160         int p;
 161
 162         p = bcsr->switches;
 163         p >>= 8;
 164         p &= 0x0F;
 165         return p;
 166 }
 167
 168 int
 169 board_au1200fb_panel_init(void)
 170 {
 171         /* Apply power */
 172     BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
 173         bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
 174         /*printk("board_au1200fb_panel_init()\n"); */
 175         return 0;
 176 }
 177
 178 int
 179 board_au1200fb_panel_shutdown(void)
 180 {
 181         /* Remove power */
 182     BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
 183         bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
 184         /*printk("board_au1200fb_panel_shutdown()\n"); */
 185         return 0;
 186 }
 187