include/asm-arm/arch-s3c2410/regs-gpio.h

   1 /* linux/include/asm-arm/arch-s3c2410/regs-gpio.h
   2  *
   3  * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
   4  *                         http://www.simtec.co.uk/products/SWLINUX/
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  *
  10  * S3C2410 GPIO register definitions
  11 */
  12
  13
  14 #ifndef __ASM_ARCH_REGS_GPIO_H
  15 #define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $"
  16
  17 #define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
  18
  19 #define S3C2410_GPIO_BANKA   (32*0)
  20 #define S3C2410_GPIO_BANKB   (32*1)
  21 #define S3C2410_GPIO_BANKC   (32*2)
  22 #define S3C2410_GPIO_BANKD   (32*3)
  23 #define S3C2410_GPIO_BANKE   (32*4)
  24 #define S3C2410_GPIO_BANKF   (32*5)
  25 #define S3C2410_GPIO_BANKG   (32*6)
  26 #define S3C2410_GPIO_BANKH   (32*7)
  27
  28 #ifdef CONFIG_CPU_S3C2400
  29 #define S3C24XX_GPIO_BASE(x)  S3C2400_GPIO_BASE(x)
  30 #define S3C24XX_MISCCR        S3C2400_MISCCR
  31 #else
  32 #define S3C24XX_GPIO_BASE(x)  S3C2410_GPIO_BASE(x)
  33 #define S3C24XX_MISCCR        S3C24XX_GPIOREG2(0x80)
  34 #endif /* CONFIG_CPU_S3C2400 */
  35
  36
  37 /* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */
  38
  39 #define S3C2400_BANKNUM(pin)     (((pin) & ~31) / 32)
  40 #define S3C2400_BASEA2B(pin)     ((((pin) & ~31) >> 2))
  41 #define S3C2400_BASEC2H(pin)     ((S3C2400_BANKNUM(pin) * 10) + \
  42                                  (2 * (S3C2400_BANKNUM(pin)-2)))
  43
  44 #define S3C2400_GPIO_BASE(pin)   (pin < S3C2410_GPIO_BANKC ? \
  45                                  S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \
  46                                  S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO)
  47
  48
  49 #define S3C2410_GPIO_BASE(pin)   ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
  50 #define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
  51
  52 /* general configuration options */
  53
  54 #define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
  55 #define S3C2410_GPIO_INPUT   (0xFFFFFFF0)       /* not available on A */
  56 #define S3C2410_GPIO_OUTPUT  (0xFFFFFFF1)
  57 #define S3C2410_GPIO_IRQ     (0xFFFFFFF2)       /* not available for all */
  58 #define S3C2410_GPIO_SFN2    (0xFFFFFFF2)       /* bank A => addr/cs/nand */
  59 #define S3C2410_GPIO_SFN3    (0xFFFFFFF3)       /* not available on A */
  60
  61 /* register address for the GPIO registers.
  62  * S3C24XX_GPIOREG2 is for the second set of registers in the
  63  * GPIO which move between s3c2410 and s3c2412 type systems */
  64
  65 #define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
  66 #define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
  67
  68
  69 /* configure GPIO ports A..G */
  70
  71 /* port A - S3C2410: 22bits, zero in bit X makes pin X output
  72  *          S3C2400: 18bits, zero in bit X makes pin X output
  73  * 1 makes port special function, this is default
  74 */
  75 #define S3C2410_GPACON     S3C2410_GPIOREG(0x00)
  76 #define S3C2410_GPADAT     S3C2410_GPIOREG(0x04)
  77
  78 #define S3C2400_GPACON     S3C2410_GPIOREG(0x00)
  79 #define S3C2400_GPADAT     S3C2410_GPIOREG(0x04)
  80
  81 #define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
  82 #define S3C2410_GPA0_OUT     (0<<0)
  83 #define S3C2410_GPA0_ADDR0   (1<<0)
  84
  85 #define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
  86 #define S3C2410_GPA1_OUT     (0<<1)
  87 #define S3C2410_GPA1_ADDR16  (1<<1)
  88
  89 #define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
  90 #define S3C2410_GPA2_OUT     (0<<2)
  91 #define S3C2410_GPA2_ADDR17  (1<<2)
  92
  93 #define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
  94 #define S3C2410_GPA3_OUT     (0<<3)
  95 #define S3C2410_GPA3_ADDR18  (1<<3)
  96
  97 #define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
  98 #define S3C2410_GPA4_OUT     (0<<4)
  99 #define S3C2410_GPA4_ADDR19  (1<<4)
 100
 101 #define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
 102 #define S3C2410_GPA5_OUT     (0<<5)
 103 #define S3C2410_GPA5_ADDR20  (1<<5)
 104
 105 #define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
 106 #define S3C2410_GPA6_OUT     (0<<6)
 107 #define S3C2410_GPA6_ADDR21  (1<<6)
 108
 109 #define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
 110 #define S3C2410_GPA7_OUT     (0<<7)
 111 #define S3C2410_GPA7_ADDR22  (1<<7)
 112
 113 #define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
 114 #define S3C2410_GPA8_OUT     (0<<8)
 115 #define S3C2410_GPA8_ADDR23  (1<<8)
 116
 117 #define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
 118 #define S3C2410_GPA9_OUT     (0<<9)
 119 #define S3C2410_GPA9_ADDR24  (1<<9)
 120
 121 #define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
 122 #define S3C2410_GPA10_OUT    (0<<10)
 123 #define S3C2410_GPA10_ADDR25 (1<<10)
 124 #define S3C2400_GPA10_SCKE   (1<<10)
 125
 126 #define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
 127 #define S3C2410_GPA11_OUT    (0<<11)
 128 #define S3C2410_GPA11_ADDR26 (1<<11)
 129 #define S3C2400_GPA11_nCAS0  (1<<11)
 130
 131 #define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
 132 #define S3C2410_GPA12_OUT    (0<<12)
 133 #define S3C2410_GPA12_nGCS1  (1<<12)
 134 #define S3C2400_GPA12_nCAS1  (1<<12)
 135
 136 #define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
 137 #define S3C2410_GPA13_OUT    (0<<13)
 138 #define S3C2410_GPA13_nGCS2  (1<<13)
 139 #define S3C2400_GPA13_nGCS1  (1<<13)
 140
 141 #define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
 142 #define S3C2410_GPA14_OUT    (0<<14)
 143 #define S3C2410_GPA14_nGCS3  (1<<14)
 144 #define S3C2400_GPA14_nGCS2  (1<<14)
 145
 146 #define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
 147 #define S3C2410_GPA15_OUT    (0<<15)
 148 #define S3C2410_GPA15_nGCS4  (1<<15)
 149 #define S3C2400_GPA15_nGCS3  (1<<15)
 150
 151 #define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
 152 #define S3C2410_GPA16_OUT    (0<<16)
 153 #define S3C2410_GPA16_nGCS5  (1<<16)
 154 #define S3C2400_GPA16_nGCS4  (1<<16)
 155
 156 #define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
 157 #define S3C2410_GPA17_OUT    (0<<17)
 158 #define S3C2410_GPA17_CLE    (1<<17)
 159 #define S3C2400_GPA17_nGCS5  (1<<17)
 160
 161 #define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
 162 #define S3C2410_GPA18_OUT    (0<<18)
 163 #define S3C2410_GPA18_ALE    (1<<18)
 164
 165 #define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
 166 #define S3C2410_GPA19_OUT    (0<<19)
 167 #define S3C2410_GPA19_nFWE   (1<<19)
 168
 169 #define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
 170 #define S3C2410_GPA20_OUT    (0<<20)
 171 #define S3C2410_GPA20_nFRE   (1<<20)
 172
 173 #define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
 174 #define S3C2410_GPA21_OUT    (0<<21)
 175 #define S3C2410_GPA21_nRSTOUT (1<<21)
 176
 177 #define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
 178 #define S3C2410_GPA22_OUT    (0<<22)
 179 #define S3C2410_GPA22_nFCE   (1<<22)
 180
 181 /* 0x08 and 0x0c are reserved on S3C2410 */
 182
 183 /* S3C2410:
 184  * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
 185  *   00 = input, 01 = output, 10=special function, 11=reserved
 186
 187  * S3C2400:
 188  * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
 189  *   00 = input, 01 = output, 10=data, 11=special function
 190
 191  * bit 0,1 = pin 0, 2,3= pin 1...
 192  *
 193  * CPBUP = pull up resistor control, 1=disabled, 0=enabled
 194 */
 195
 196 #define S3C2410_GPBCON     S3C2410_GPIOREG(0x10)
 197 #define S3C2410_GPBDAT     S3C2410_GPIOREG(0x14)
 198 #define S3C2410_GPBUP      S3C2410_GPIOREG(0x18)
 199
 200 #define S3C2400_GPBCON     S3C2410_GPIOREG(0x08)
 201 #define S3C2400_GPBDAT     S3C2410_GPIOREG(0x0C)
 202 #define S3C2400_GPBUP      S3C2410_GPIOREG(0x10)
 203
 204 /* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
 205
 206 #define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
 207 #define S3C2410_GPB0_INP     (0x00 << 0)
 208 #define S3C2410_GPB0_OUTP    (0x01 << 0)
 209 #define S3C2410_GPB0_TOUT0   (0x02 << 0)
 210 #define S3C2400_GPB0_DATA16  (0x02 << 0)
 211
 212 #define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
 213 #define S3C2410_GPB1_INP     (0x00 << 2)
 214 #define S3C2410_GPB1_OUTP    (0x01 << 2)
 215 #define S3C2410_GPB1_TOUT1   (0x02 << 2)
 216 #define S3C2400_GPB1_DATA17  (0x02 << 2)
 217
 218 #define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
 219 #define S3C2410_GPB2_INP     (0x00 << 4)
 220 #define S3C2410_GPB2_OUTP    (0x01 << 4)
 221 #define S3C2410_GPB2_TOUT2   (0x02 << 4)
 222 #define S3C2400_GPB2_DATA18  (0x02 << 4)
 223 #define S3C2400_GPB2_TCLK1   (0x03 << 4)
 224
 225 #define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
 226 #define S3C2410_GPB3_INP     (0x00 << 6)
 227 #define S3C2410_GPB3_OUTP    (0x01 << 6)
 228 #define S3C2410_GPB3_TOUT3   (0x02 << 6)
 229 #define S3C2400_GPB3_DATA19  (0x02 << 6)
 230 #define S3C2400_GPB3_TXD1    (0x03 << 6)
 231
 232 #define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
 233 #define S3C2410_GPB4_INP     (0x00 << 8)
 234 #define S3C2410_GPB4_OUTP    (0x01 << 8)
 235 #define S3C2410_GPB4_TCLK0   (0x02 << 8)
 236 #define S3C2400_GPB4_DATA20  (0x02 << 8)
 237 #define S3C2410_GPB4_MASK    (0x03 << 8)
 238 #define S3C2400_GPB4_RXD1    (0x03 << 8)
 239 #define S3C2400_GPB4_MASK    (0x03 << 8)
 240
 241 #define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
 242 #define S3C2410_GPB5_INP     (0x00 << 10)
 243 #define S3C2410_GPB5_OUTP    (0x01 << 10)
 244 #define S3C2410_GPB5_nXBACK  (0x02 << 10)
 245 #define S3C2443_GPB5_XBACK   (0x03 << 10)
 246 #define S3C2400_GPB5_DATA21  (0x02 << 10)
 247 #define S3C2400_GPB5_nCTS1   (0x03 << 10)
 248
 249 #define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
 250 #define S3C2410_GPB6_INP     (0x00 << 12)
 251 #define S3C2410_GPB6_OUTP    (0x01 << 12)
 252 #define S3C2410_GPB6_nXBREQ  (0x02 << 12)
 253 #define S3C2443_GPB6_XBREQ   (0x03 << 12)
 254 #define S3C2400_GPB6_DATA22  (0x02 << 12)
 255 #define S3C2400_GPB6_nRTS1   (0x03 << 12)
 256
 257 #define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
 258 #define S3C2410_GPB7_INP     (0x00 << 14)
 259 #define S3C2410_GPB7_OUTP    (0x01 << 14)
 260 #define S3C2410_GPB7_nXDACK1 (0x02 << 14)
 261 #define S3C2443_GPB7_XDACK1  (0x03 << 14)
 262 #define S3C2400_GPB7_DATA23  (0x02 << 14)
 263
 264 #define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
 265 #define S3C2410_GPB8_INP     (0x00 << 16)
 266 #define S3C2410_GPB8_OUTP    (0x01 << 16)
 267 #define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
 268 #define S3C2400_GPB8_DATA24  (0x02 << 16)
 269
 270 #define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
 271 #define S3C2410_GPB9_INP     (0x00 << 18)
 272 #define S3C2410_GPB9_OUTP    (0x01 << 18)
 273 #define S3C2410_GPB9_nXDACK0 (0x02 << 18)
 274 #define S3C2443_GPB9_XDACK0  (0x03 << 18)
 275 #define S3C2400_GPB9_DATA25  (0x02 << 18)
 276 #define S3C2400_GPB9_I2SSDI  (0x03 << 18)
 277
 278 #define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
 279 #define S3C2410_GPB10_INP    (0x00 << 20)
 280 #define S3C2410_GPB10_OUTP   (0x01 << 20)
 281 #define S3C2410_GPB10_nXDRE0 (0x02 << 20)
 282 #define S3C2443_GPB10_XDREQ0 (0x03 << 20)
 283 #define S3C2400_GPB10_DATA26 (0x02 << 20)
 284 #define S3C2400_GPB10_nSS    (0x03 << 20)
 285
 286 #define S3C2400_GPB11        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
 287 #define S3C2400_GPB11_INP    (0x00 << 22)
 288 #define S3C2400_GPB11_OUTP   (0x01 << 22)
 289 #define S3C2400_GPB11_DATA27 (0x02 << 22)
 290
 291 #define S3C2400_GPB12        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
 292 #define S3C2400_GPB12_INP    (0x00 << 24)
 293 #define S3C2400_GPB12_OUTP   (0x01 << 24)
 294 #define S3C2400_GPB12_DATA28 (0x02 << 24)
 295
 296 #define S3C2400_GPB13        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
 297 #define S3C2400_GPB13_INP    (0x00 << 26)
 298 #define S3C2400_GPB13_OUTP   (0x01 << 26)
 299 #define S3C2400_GPB13_DATA29 (0x02 << 26)
 300
 301 #define S3C2400_GPB14        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
 302 #define S3C2400_GPB14_INP    (0x00 << 28)
 303 #define S3C2400_GPB14_OUTP   (0x01 << 28)
 304 #define S3C2400_GPB14_DATA30 (0x02 << 28)
 305
 306 #define S3C2400_GPB15        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
 307 #define S3C2400_GPB15_INP    (0x00 << 30)
 308 #define S3C2400_GPB15_OUTP   (0x01 << 30)
 309 #define S3C2400_GPB15_DATA31 (0x02 << 30)
 310
 311 #define S3C2410_GPB_PUPDIS(x)  (1<<(x))
 312
 313 /* Port C consits of 16 GPIO/Special function
 314  *
 315  * almost identical setup to port b, but the special functions are mostly
 316  * to do with the video system's sync/etc.
 317 */
 318
 319 #define S3C2410_GPCCON     S3C2410_GPIOREG(0x20)
 320 #define S3C2410_GPCDAT     S3C2410_GPIOREG(0x24)
 321 #define S3C2410_GPCUP      S3C2410_GPIOREG(0x28)
 322
 323 #define S3C2400_GPCCON     S3C2410_GPIOREG(0x14)
 324 #define S3C2400_GPCDAT     S3C2410_GPIOREG(0x18)
 325 #define S3C2400_GPCUP      S3C2410_GPIOREG(0x1C)
 326
 327 #define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
 328 #define S3C2410_GPC0_INP        (0x00 << 0)
 329 #define S3C2410_GPC0_OUTP       (0x01 << 0)
 330 #define S3C2410_GPC0_LEND       (0x02 << 0)
 331 #define S3C2400_GPC0_VD0        (0x02 << 0)
 332
 333 #define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
 334 #define S3C2410_GPC1_INP        (0x00 << 2)
 335 #define S3C2410_GPC1_OUTP       (0x01 << 2)
 336 #define S3C2410_GPC1_VCLK       (0x02 << 2)
 337 #define S3C2400_GPC1_VD1        (0x02 << 2)
 338
 339 #define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
 340 #define S3C2410_GPC2_INP        (0x00 << 4)
 341 #define S3C2410_GPC2_OUTP       (0x01 << 4)
 342 #define S3C2410_GPC2_VLINE      (0x02 << 4)
 343 #define S3C2400_GPC2_VD2        (0x02 << 4)
 344
 345 #define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
 346 #define S3C2410_GPC3_INP        (0x00 << 6)
 347 #define S3C2410_GPC3_OUTP       (0x01 << 6)
 348 #define S3C2410_GPC3_VFRAME     (0x02 << 6)
 349 #define S3C2400_GPC3_VD3        (0x02 << 6)
 350
 351 #define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
 352 #define S3C2410_GPC4_INP        (0x00 << 8)
 353 #define S3C2410_GPC4_OUTP       (0x01 << 8)
 354 #define S3C2410_GPC4_VM         (0x02 << 8)
 355 #define S3C2400_GPC4_VD4        (0x02 << 8)
 356
 357 #define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
 358 #define S3C2410_GPC5_INP        (0x00 << 10)
 359 #define S3C2410_GPC5_OUTP       (0x01 << 10)
 360 #define S3C2410_GPC5_LCDVF0     (0x02 << 10)
 361 #define S3C2400_GPC5_VD5        (0x02 << 10)
 362
 363 #define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
 364 #define S3C2410_GPC6_INP        (0x00 << 12)
 365 #define S3C2410_GPC6_OUTP       (0x01 << 12)
 366 #define S3C2410_GPC6_LCDVF1     (0x02 << 12)
 367 #define S3C2400_GPC6_VD6        (0x02 << 12)
 368
 369 #define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
 370 #define S3C2410_GPC7_INP        (0x00 << 14)
 371 #define S3C2410_GPC7_OUTP       (0x01 << 14)
 372 #define S3C2410_GPC7_LCDVF2     (0x02 << 14)
 373 #define S3C2400_GPC7_VD7        (0x02 << 14)
 374
 375 #define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
 376 #define S3C2410_GPC8_INP        (0x00 << 16)
 377 #define S3C2410_GPC8_OUTP       (0x01 << 16)
 378 #define S3C2410_GPC8_VD0        (0x02 << 16)
 379 #define S3C2400_GPC8_VD8        (0x02 << 16)
 380
 381 #define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
 382 #define S3C2410_GPC9_INP        (0x00 << 18)
 383 #define S3C2410_GPC9_OUTP       (0x01 << 18)
 384 #define S3C2410_GPC9_VD1        (0x02 << 18)
 385 #define S3C2400_GPC9_VD9        (0x02 << 18)
 386
 387 #define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
 388 #define S3C2410_GPC10_INP       (0x00 << 20)
 389 #define S3C2410_GPC10_OUTP      (0x01 << 20)
 390 #define S3C2410_GPC10_VD2       (0x02 << 20)
 391 #define S3C2400_GPC10_VD10      (0x02 << 20)
 392
 393 #define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
 394 #define S3C2410_GPC11_INP       (0x00 << 22)
 395 #define S3C2410_GPC11_OUTP      (0x01 << 22)
 396 #define S3C2410_GPC11_VD3       (0x02 << 22)
 397 #define S3C2400_GPC11_VD11      (0x02 << 22)
 398
 399 #define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
 400 #define S3C2410_GPC12_INP       (0x00 << 24)
 401 #define S3C2410_GPC12_OUTP      (0x01 << 24)
 402 #define S3C2410_GPC12_VD4       (0x02 << 24)
 403 #define S3C2400_GPC12_VD12      (0x02 << 24)
 404
 405 #define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
 406 #define S3C2410_GPC13_INP       (0x00 << 26)
 407 #define S3C2410_GPC13_OUTP      (0x01 << 26)
 408 #define S3C2410_GPC13_VD5       (0x02 << 26)
 409 #define S3C2400_GPC13_VD13      (0x02 << 26)
 410
 411 #define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
 412 #define S3C2410_GPC14_INP       (0x00 << 28)
 413 #define S3C2410_GPC14_OUTP      (0x01 << 28)
 414 #define S3C2410_GPC14_VD6       (0x02 << 28)
 415 #define S3C2400_GPC14_VD14      (0x02 << 28)
 416
 417 #define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
 418 #define S3C2410_GPC15_INP       (0x00 << 30)
 419 #define S3C2410_GPC15_OUTP      (0x01 << 30)
 420 #define S3C2410_GPC15_VD7       (0x02 << 30)
 421 #define S3C2400_GPC15_VD15      (0x02 << 30)
 422
 423 #define S3C2410_GPC_PUPDIS(x)  (1<<(x))
 424
 425 /*
 426  * S3C2410: Port D consists of 16 GPIO/Special function
 427  *
 428  * almost identical setup to port b, but the special functions are mostly
 429  * to do with the video system's data.
 430  *
 431  * S3C2400: Port D consists of 11 GPIO/Special function
 432  *
 433  * almost identical setup to port c
 434 */
 435
 436 #define S3C2410_GPDCON     S3C2410_GPIOREG(0x30)
 437 #define S3C2410_GPDDAT     S3C2410_GPIOREG(0x34)
 438 #define S3C2410_GPDUP      S3C2410_GPIOREG(0x38)
 439
 440 #define S3C2400_GPDCON     S3C2410_GPIOREG(0x20)
 441 #define S3C2400_GPDDAT     S3C2410_GPIOREG(0x24)
 442 #define S3C2400_GPDUP      S3C2410_GPIOREG(0x28)
 443
 444 #define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
 445 #define S3C2410_GPD0_INP        (0x00 << 0)
 446 #define S3C2410_GPD0_OUTP       (0x01 << 0)
 447 #define S3C2410_GPD0_VD8        (0x02 << 0)
 448 #define S3C2400_GPD0_VFRAME     (0x02 << 0)
 449 #define S3C2442_GPD0_nSPICS1    (0x03 << 0)
 450
 451 #define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
 452 #define S3C2410_GPD1_INP        (0x00 << 2)
 453 #define S3C2410_GPD1_OUTP       (0x01 << 2)
 454 #define S3C2410_GPD1_VD9        (0x02 << 2)
 455 #define S3C2400_GPD1_VM         (0x02 << 2)
 456 #define S3C2442_GPD1_SPICLK1    (0x03 << 2)
 457
 458 #define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
 459 #define S3C2410_GPD2_INP        (0x00 << 4)
 460 #define S3C2410_GPD2_OUTP       (0x01 << 4)
 461 #define S3C2410_GPD2_VD10       (0x02 << 4)
 462 #define S3C2400_GPD2_VLINE      (0x02 << 4)
 463
 464 #define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
 465 #define S3C2410_GPD3_INP        (0x00 << 6)
 466 #define S3C2410_GPD3_OUTP       (0x01 << 6)
 467 #define S3C2410_GPD3_VD11       (0x02 << 6)
 468 #define S3C2400_GPD3_VCLK       (0x02 << 6)
 469
 470 #define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
 471 #define S3C2410_GPD4_INP        (0x00 << 8)
 472 #define S3C2410_GPD4_OUTP       (0x01 << 8)
 473 #define S3C2410_GPD4_VD12       (0x02 << 8)
 474 #define S3C2400_GPD4_LEND       (0x02 << 8)
 475
 476 #define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
 477 #define S3C2410_GPD5_INP        (0x00 << 10)
 478 #define S3C2410_GPD5_OUTP       (0x01 << 10)
 479 #define S3C2410_GPD5_VD13       (0x02 << 10)
 480 #define S3C2400_GPD5_TOUT0      (0x02 << 10)
 481
 482 #define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
 483 #define S3C2410_GPD6_INP        (0x00 << 12)
 484 #define S3C2410_GPD6_OUTP       (0x01 << 12)
 485 #define S3C2410_GPD6_VD14       (0x02 << 12)
 486 #define S3C2400_GPD6_TOUT1      (0x02 << 12)
 487
 488 #define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
 489 #define S3C2410_GPD7_INP        (0x00 << 14)
 490 #define S3C2410_GPD7_OUTP       (0x01 << 14)
 491 #define S3C2410_GPD7_VD15       (0x02 << 14)
 492 #define S3C2400_GPD7_TOUT2      (0x02 << 14)
 493
 494 #define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
 495 #define S3C2410_GPD8_INP        (0x00 << 16)
 496 #define S3C2410_GPD8_OUTP       (0x01 << 16)
 497 #define S3C2410_GPD8_VD16       (0x02 << 16)
 498 #define S3C2400_GPD8_TOUT3      (0x02 << 16)
 499
 500 #define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
 501 #define S3C2410_GPD9_INP        (0x00 << 18)
 502 #define S3C2410_GPD9_OUTP       (0x01 << 18)
 503 #define S3C2410_GPD9_VD17       (0x02 << 18)
 504 #define S3C2400_GPD9_TCLK0      (0x02 << 18)
 505 #define S3C2410_GPD9_MASK       (0x03 << 18)
 506
 507 #define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
 508 #define S3C2410_GPD10_INP       (0x00 << 20)
 509 #define S3C2410_GPD10_OUTP      (0x01 << 20)
 510 #define S3C2410_GPD10_VD18      (0x02 << 20)
 511 #define S3C2400_GPD10_nWAIT     (0x02 << 20)
 512
 513 #define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
 514 #define S3C2410_GPD11_INP       (0x00 << 22)
 515 #define S3C2410_GPD11_OUTP      (0x01 << 22)
 516 #define S3C2410_GPD11_VD19      (0x02 << 22)
 517
 518 #define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
 519 #define S3C2410_GPD12_INP       (0x00 << 24)
 520 #define S3C2410_GPD12_OUTP      (0x01 << 24)
 521 #define S3C2410_GPD12_VD20      (0x02 << 24)
 522
 523 #define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
 524 #define S3C2410_GPD13_INP       (0x00 << 26)
 525 #define S3C2410_GPD13_OUTP      (0x01 << 26)
 526 #define S3C2410_GPD13_VD21      (0x02 << 26)
 527
 528 #define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
 529 #define S3C2410_GPD14_INP       (0x00 << 28)
 530 #define S3C2410_GPD14_OUTP      (0x01 << 28)
 531 #define S3C2410_GPD14_VD22      (0x02 << 28)
 532
 533 #define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
 534 #define S3C2410_GPD15_INP       (0x00 << 30)
 535 #define S3C2410_GPD15_OUTP      (0x01 << 30)
 536 #define S3C2410_GPD15_VD23      (0x02 << 30)
 537
 538 #define S3C2410_GPD_PUPDIS(x)  (1<<(x))
 539
 540 /* S3C2410:
 541  * Port E consists of 16 GPIO/Special function
 542  *
 543  * again, the same as port B, but dealing with I2S, SDI, and
 544  * more miscellaneous functions
 545  *
 546  * S3C2400:
 547  * Port E consists of 12 GPIO/Special function
 548  *
 549  * GPIO / interrupt inputs
 550 */
 551
 552 #define S3C2410_GPECON     S3C2410_GPIOREG(0x40)
 553 #define S3C2410_GPEDAT     S3C2410_GPIOREG(0x44)
 554 #define S3C2410_GPEUP      S3C2410_GPIOREG(0x48)
 555
 556 #define S3C2400_GPECON     S3C2410_GPIOREG(0x2C)
 557 #define S3C2400_GPEDAT     S3C2410_GPIOREG(0x30)
 558 #define S3C2400_GPEUP      S3C2410_GPIOREG(0x34)
 559
 560 #define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
 561 #define S3C2410_GPE0_INP       (0x00 << 0)
 562 #define S3C2410_GPE0_OUTP      (0x01 << 0)
 563 #define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
 564 #define S3C2443_GPE0_AC_nRESET (0x03 << 0)
 565 #define S3C2400_GPE0_EINT0     (0x02 << 0)
 566 #define S3C2410_GPE0_MASK      (0x03 << 0)
 567
 568 #define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
 569 #define S3C2410_GPE1_INP       (0x00 << 2)
 570 #define S3C2410_GPE1_OUTP      (0x01 << 2)
 571 #define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
 572 #define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
 573 #define S3C2400_GPE1_EINT1     (0x02 << 2)
 574 #define S3C2400_GPE1_nSS       (0x03 << 2)
 575 #define S3C2410_GPE1_MASK      (0x03 << 2)
 576
 577 #define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
 578 #define S3C2410_GPE2_INP       (0x00 << 4)
 579 #define S3C2410_GPE2_OUTP      (0x01 << 4)
 580 #define S3C2410_GPE2_CDCLK     (0x02 << 4)
 581 #define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
 582 #define S3C2400_GPE2_EINT2     (0x02 << 4)
 583 #define S3C2400_GPE2_I2SSDI    (0x03 << 4)
 584
 585 #define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
 586 #define S3C2410_GPE3_INP       (0x00 << 6)
 587 #define S3C2410_GPE3_OUTP      (0x01 << 6)
 588 #define S3C2410_GPE3_I2SSDI    (0x02 << 6)
 589 #define S3C2443_GPE3_AC_SDI    (0x03 << 6)
 590 #define S3C2400_GPE3_EINT3     (0x02 << 6)
 591 #define S3C2400_GPE3_nCTS1     (0x03 << 6)
 592 #define S3C2410_GPE3_nSS0      (0x03 << 6)
 593 #define S3C2410_GPE3_MASK      (0x03 << 6)
 594
 595 #define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
 596 #define S3C2410_GPE4_INP       (0x00 << 8)
 597 #define S3C2410_GPE4_OUTP      (0x01 << 8)
 598 #define S3C2410_GPE4_I2SSDO    (0x02 << 8)
 599 #define S3C2443_GPE4_AC_SDO    (0x03 << 8)
 600 #define S3C2400_GPE4_EINT4     (0x02 << 8)
 601 #define S3C2400_GPE4_nRTS1     (0x03 << 8)
 602 #define S3C2410_GPE4_I2SSDI    (0x03 << 8)
 603 #define S3C2410_GPE4_MASK      (0x03 << 8)
 604
 605 #define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
 606 #define S3C2410_GPE5_INP       (0x00 << 10)
 607 #define S3C2410_GPE5_OUTP      (0x01 << 10)
 608 #define S3C2410_GPE5_SDCLK     (0x02 << 10)
 609 #define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
 610 #define S3C2400_GPE5_EINT5     (0x02 << 10)
 611 #define S3C2400_GPE5_TCLK1     (0x03 << 10)
 612
 613 #define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
 614 #define S3C2410_GPE6_INP       (0x00 << 12)
 615 #define S3C2410_GPE6_OUTP      (0x01 << 12)
 616 #define S3C2410_GPE6_SDCMD     (0x02 << 12)
 617 #define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
 618 #define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
 619 #define S3C2400_GPE6_EINT6     (0x02 << 12)
 620
 621 #define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
 622 #define S3C2410_GPE7_INP       (0x00 << 14)
 623 #define S3C2410_GPE7_OUTP      (0x01 << 14)
 624 #define S3C2410_GPE7_SDDAT0    (0x02 << 14)
 625 #define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
 626 #define S3C2443_GPE7_AC_SDI    (0x03 << 14)
 627 #define S3C2400_GPE7_EINT7     (0x02 << 14)
 628
 629 #define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
 630 #define S3C2410_GPE8_INP       (0x00 << 16)
 631 #define S3C2410_GPE8_OUTP      (0x01 << 16)
 632 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
 633 #define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
 634 #define S3C2443_GPE8_AC_SDO    (0x03 << 16)
 635 #define S3C2400_GPE8_nXDACK0   (0x02 << 16)
 636
 637 #define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
 638 #define S3C2410_GPE9_INP       (0x00 << 18)
 639 #define S3C2410_GPE9_OUTP      (0x01 << 18)
 640 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
 641 #define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
 642 #define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
 643 #define S3C2400_GPE9_nXDACK1   (0x02 << 18)
 644 #define S3C2400_GPE9_nXBACK    (0x03 << 18)
 645
 646 #define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
 647 #define S3C2410_GPE10_INP      (0x00 << 20)
 648 #define S3C2410_GPE10_OUTP     (0x01 << 20)
 649 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
 650 #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
 651 #define S3C2443_GPE10_AC_nRESET (0x03 << 20)
 652 #define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
 653
 654 #define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
 655 #define S3C2410_GPE11_INP      (0x00 << 22)
 656 #define S3C2410_GPE11_OUTP     (0x01 << 22)
 657 #define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
 658 #define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
 659 #define S3C2400_GPE11_nXBREQ   (0x03 << 22)
 660
 661 #define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
 662 #define S3C2410_GPE12_INP      (0x00 << 24)
 663 #define S3C2410_GPE12_OUTP     (0x01 << 24)
 664 #define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
 665
 666 #define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
 667 #define S3C2410_GPE13_INP      (0x00 << 26)
 668 #define S3C2410_GPE13_OUTP     (0x01 << 26)
 669 #define S3C2410_GPE13_SPICLK0  (0x02 << 26)
 670
 671 #define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
 672 #define S3C2410_GPE14_INP      (0x00 << 28)
 673 #define S3C2410_GPE14_OUTP     (0x01 << 28)
 674 #define S3C2410_GPE14_IICSCL   (0x02 << 28)
 675 #define S3C2410_GPE14_MASK     (0x03 << 28)
 676
 677 #define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
 678 #define S3C2410_GPE15_INP      (0x00 << 30)
 679 #define S3C2410_GPE15_OUTP     (0x01 << 30)
 680 #define S3C2410_GPE15_IICSDA   (0x02 << 30)
 681 #define S3C2410_GPE15_MASK     (0x03 << 30)
 682
 683 #define S3C2440_GPE0_ACSYNC    (0x03 << 0)
 684 #define S3C2440_GPE1_ACBITCLK  (0x03 << 2)
 685 #define S3C2440_GPE2_ACRESET   (0x03 << 4)
 686 #define S3C2440_GPE3_ACIN      (0x03 << 6)
 687 #define S3C2440_GPE4_ACOUT     (0x03 << 8)
 688
 689 #define S3C2410_GPE_PUPDIS(x)  (1<<(x))
 690
 691 /* S3C2410:
 692  * Port F consists of 8 GPIO/Special function
 693  *
 694  * GPIO / interrupt inputs
 695  *
 696  * GPFCON has 2 bits for each of the input pins on port F
 697  *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
 698  *
 699  * pull up works like all other ports.
 700  *
 701  * S3C2400:
 702  * Port F consists of 7 GPIO/Special function
 703  *
 704  * GPIO/serial/misc pins
 705 */
 706
 707 #define S3C2410_GPFCON     S3C2410_GPIOREG(0x50)
 708 #define S3C2410_GPFDAT     S3C2410_GPIOREG(0x54)
 709 #define S3C2410_GPFUP      S3C2410_GPIOREG(0x58)
 710
 711 #define S3C2400_GPFCON     S3C2410_GPIOREG(0x38)
 712 #define S3C2400_GPFDAT     S3C2410_GPIOREG(0x3C)
 713 #define S3C2400_GPFUP      S3C2410_GPIOREG(0x40)
 714
 715 #define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
 716 #define S3C2410_GPF0_INP    (0x00 << 0)
 717 #define S3C2410_GPF0_OUTP   (0x01 << 0)
 718 #define S3C2410_GPF0_EINT0  (0x02 << 0)
 719 #define S3C2400_GPF0_RXD0   (0x02 << 0)
 720
 721 #define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
 722 #define S3C2410_GPF1_INP    (0x00 << 2)
 723 #define S3C2410_GPF1_OUTP   (0x01 << 2)
 724 #define S3C2410_GPF1_EINT1  (0x02 << 2)
 725 #define S3C2400_GPF1_RXD1   (0x02 << 2)
 726 #define S3C2400_GPF1_IICSDA (0x03 << 2)
 727
 728 #define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
 729 #define S3C2410_GPF2_INP    (0x00 << 4)
 730 #define S3C2410_GPF2_OUTP   (0x01 << 4)
 731 #define S3C2410_GPF2_EINT2  (0x02 << 4)
 732 #define S3C2400_GPF2_TXD0   (0x02 << 4)
 733
 734 #define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
 735 #define S3C2410_GPF3_INP    (0x00 << 6)
 736 #define S3C2410_GPF3_OUTP   (0x01 << 6)
 737 #define S3C2410_GPF3_EINT3  (0x02 << 6)
 738 #define S3C2400_GPF3_TXD1   (0x02 << 6)
 739 #define S3C2400_GPF3_IICSCL (0x03 << 6)
 740
 741 #define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
 742 #define S3C2410_GPF4_INP    (0x00 << 8)
 743 #define S3C2410_GPF4_OUTP   (0x01 << 8)
 744 #define S3C2410_GPF4_EINT4  (0x02 << 8)
 745 #define S3C2400_GPF4_nRTS0  (0x02 << 8)
 746 #define S3C2400_GPF4_nXBACK (0x03 << 8)
 747
 748 #define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
 749 #define S3C2410_GPF5_INP    (0x00 << 10)
 750 #define S3C2410_GPF5_OUTP   (0x01 << 10)
 751 #define S3C2410_GPF5_EINT5  (0x02 << 10)
 752 #define S3C2400_GPF5_nCTS0  (0x02 << 10)
 753 #define S3C2400_GPF5_nXBREQ (0x03 << 10)
 754
 755 #define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
 756 #define S3C2410_GPF6_INP    (0x00 << 12)
 757 #define S3C2410_GPF6_OUTP   (0x01 << 12)
 758 #define S3C2410_GPF6_EINT6  (0x02 << 12)
 759 #define S3C2400_GPF6_CLKOUT (0x02 << 12)
 760
 761 #define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
 762 #define S3C2410_GPF7_INP    (0x00 << 14)
 763 #define S3C2410_GPF7_OUTP   (0x01 << 14)
 764 #define S3C2410_GPF7_EINT7  (0x02 << 14)
 765
 766 #define S3C2410_GPF_PUPDIS(x)  (1<<(x))
 767
 768 /* S3C2410:
 769  * Port G consists of 8 GPIO/IRQ/Special function
 770  *
 771  * GPGCON has 2 bits for each of the input pins on port F
 772  *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
 773  *
 774  * pull up works like all other ports.
 775  *
 776  * S3C2400:
 777  * Port G consists of 10 GPIO/Special function
 778 */
 779
 780 #define S3C2410_GPGCON     S3C2410_GPIOREG(0x60)
 781 #define S3C2410_GPGDAT     S3C2410_GPIOREG(0x64)
 782 #define S3C2410_GPGUP      S3C2410_GPIOREG(0x68)
 783
 784 #define S3C2400_GPGCON     S3C2410_GPIOREG(0x44)
 785 #define S3C2400_GPGDAT     S3C2410_GPIOREG(0x48)
 786 #define S3C2400_GPGUP      S3C2410_GPIOREG(0x4C)
 787
 788 #define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
 789 #define S3C2410_GPG0_INP      (0x00 << 0)
 790 #define S3C2410_GPG0_OUTP     (0x01 << 0)
 791 #define S3C2410_GPG0_EINT8    (0x02 << 0)
 792 #define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
 793
 794 #define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
 795 #define S3C2410_GPG1_INP      (0x00 << 2)
 796 #define S3C2410_GPG1_OUTP     (0x01 << 2)
 797 #define S3C2410_GPG1_EINT9    (0x02 << 2)
 798 #define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
 799
 800 #define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
 801 #define S3C2410_GPG2_INP      (0x00 << 4)
 802 #define S3C2410_GPG2_OUTP     (0x01 << 4)
 803 #define S3C2410_GPG2_EINT10   (0x02 << 4)
 804 #define S3C2400_GPG2_CDCLK    (0x02 << 4)
 805
 806 #define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
 807 #define S3C2410_GPG3_INP      (0x00 << 6)
 808 #define S3C2410_GPG3_OUTP     (0x01 << 6)
 809 #define S3C2410_GPG3_EINT11   (0x02 << 6)
 810 #define S3C2400_GPG3_I2SSDO   (0x02 << 6)
 811 #define S3C2400_GPG3_I2SSDI   (0x03 << 6)
 812
 813 #define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
 814 #define S3C2410_GPG4_INP      (0x00 << 8)
 815 #define S3C2410_GPG4_OUTP     (0x01 << 8)
 816 #define S3C2410_GPG4_EINT12   (0x02 << 8)
 817 #define S3C2400_GPG4_MMCCLK   (0x02 << 8)
 818 #define S3C2400_GPG4_I2SSDI   (0x03 << 8)
 819 #define S3C2410_GPG4_LCDPWREN (0x03 << 8)
 820 #define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
 821
 822 #define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
 823 #define S3C2410_GPG5_INP      (0x00 << 10)
 824 #define S3C2410_GPG5_OUTP     (0x01 << 10)
 825 #define S3C2410_GPG5_EINT13   (0x02 << 10)
 826 #define S3C2400_GPG5_MMCCMD   (0x02 << 10)
 827 #define S3C2400_GPG5_IICSDA   (0x03 << 10)
 828 #define S3C2410_GPG5_SPIMISO1 (0x03 << 10)      /* not s3c2443 */
 829
 830 #define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
 831 #define S3C2410_GPG6_INP      (0x00 << 12)
 832 #define S3C2410_GPG6_OUTP     (0x01 << 12)
 833 #define S3C2410_GPG6_EINT14   (0x02 << 12)
 834 #define S3C2400_GPG6_MMCDAT   (0x02 << 12)
 835 #define S3C2400_GPG6_IICSCL   (0x03 << 12)
 836 #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
 837
 838 #define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
 839 #define S3C2410_GPG7_INP      (0x00 << 14)
 840 #define S3C2410_GPG7_OUTP     (0x01 << 14)
 841 #define S3C2410_GPG7_EINT15   (0x02 << 14)
 842 #define S3C2410_GPG7_SPICLK1  (0x03 << 14)
 843 #define S3C2400_GPG7_SPIMISO  (0x02 << 14)
 844 #define S3C2400_GPG7_IICSDA   (0x03 << 14)
 845
 846 #define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
 847 #define S3C2410_GPG8_INP      (0x00 << 16)
 848 #define S3C2410_GPG8_OUTP     (0x01 << 16)
 849 #define S3C2410_GPG8_EINT16   (0x02 << 16)
 850 #define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
 851 #define S3C2400_GPG8_IICSCL   (0x03 << 16)
 852
 853 #define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
 854 #define S3C2410_GPG9_INP      (0x00 << 18)
 855 #define S3C2410_GPG9_OUTP     (0x01 << 18)
 856 #define S3C2410_GPG9_EINT17   (0x02 << 18)
 857 #define S3C2400_GPG9_SPICLK   (0x02 << 18)
 858 #define S3C2400_GPG9_MMCCLK   (0x03 << 18)
 859
 860 #define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
 861 #define S3C2410_GPG10_INP     (0x00 << 20)
 862 #define S3C2410_GPG10_OUTP    (0x01 << 20)
 863 #define S3C2410_GPG10_EINT18  (0x02 << 20)
 864
 865 #define S3C2410_GPG11         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
 866 #define S3C2410_GPG11_INP     (0x00 << 22)
 867 #define S3C2410_GPG11_OUTP    (0x01 << 22)
 868 #define S3C2410_GPG11_EINT19  (0x02 << 22)
 869 #define S3C2410_GPG11_TCLK1   (0x03 << 22)
 870 #define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
 871
 872 #define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
 873 #define S3C2410_GPG12_INP     (0x00 << 24)
 874 #define S3C2410_GPG12_OUTP    (0x01 << 24)
 875 #define S3C2410_GPG12_EINT20  (0x02 << 24)
 876 #define S3C2410_GPG12_XMON    (0x03 << 24)
 877 #define S3C2442_GPG12_nSPICS0 (0x03 << 24)
 878 #define S3C2443_GPG12_nINPACK (0x03 << 24)
 879
 880 #define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
 881 #define S3C2410_GPG13_INP     (0x00 << 26)
 882 #define S3C2410_GPG13_OUTP    (0x01 << 26)
 883 #define S3C2410_GPG13_EINT21  (0x02 << 26)
 884 #define S3C2410_GPG13_nXPON   (0x03 << 26)
 885 #define S3C2443_GPG13_CF_nREG (0x03 << 26)
 886
 887 #define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
 888 #define S3C2410_GPG14_INP     (0x00 << 28)
 889 #define S3C2410_GPG14_OUTP    (0x01 << 28)
 890 #define S3C2410_GPG14_EINT22  (0x02 << 28)
 891 #define S3C2410_GPG14_YMON    (0x03 << 28)
 892 #define S3C2443_GPG14_CF_RESET (0x03 << 28)
 893
 894 #define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
 895 #define S3C2410_GPG15_INP     (0x00 << 30)
 896 #define S3C2410_GPG15_OUTP    (0x01 << 30)
 897 #define S3C2410_GPG15_EINT23  (0x02 << 30)
 898 #define S3C2410_GPG15_nYPON   (0x03 << 30)
 899 #define S3C2443_GPG15_CF_PWR  (0x03 << 30)
 900
 901 #define S3C2410_GPG_PUPDIS(x)  (1<<(x))
 902
 903 /* Port H consists of11 GPIO/serial/Misc pins
 904  *
 905  * GPGCON has 2 bits for each of the input pins on port F
 906  *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
 907  *
 908  * pull up works like all other ports.
 909 */
 910
 911 #define S3C2410_GPHCON     S3C2410_GPIOREG(0x70)
 912 #define S3C2410_GPHDAT     S3C2410_GPIOREG(0x74)
 913 #define S3C2410_GPHUP      S3C2410_GPIOREG(0x78)
 914
 915 #define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
 916 #define S3C2410_GPH0_INP    (0x00 << 0)
 917 #define S3C2410_GPH0_OUTP   (0x01 << 0)
 918 #define S3C2410_GPH0_nCTS0  (0x02 << 0)
 919
 920 #define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
 921 #define S3C2410_GPH1_INP    (0x00 << 2)
 922 #define S3C2410_GPH1_OUTP   (0x01 << 2)
 923 #define S3C2410_GPH1_nRTS0  (0x02 << 2)
 924
 925 #define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
 926 #define S3C2410_GPH2_INP    (0x00 << 4)
 927 #define S3C2410_GPH2_OUTP   (0x01 << 4)
 928 #define S3C2410_GPH2_TXD0   (0x02 << 4)
 929
 930 #define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
 931 #define S3C2410_GPH3_INP    (0x00 << 6)
 932 #define S3C2410_GPH3_OUTP   (0x01 << 6)
 933 #define S3C2410_GPH3_RXD0   (0x02 << 6)
 934
 935 #define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
 936 #define S3C2410_GPH4_INP    (0x00 << 8)
 937 #define S3C2410_GPH4_OUTP   (0x01 << 8)
 938 #define S3C2410_GPH4_TXD1   (0x02 << 8)
 939
 940 #define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
 941 #define S3C2410_GPH5_INP    (0x00 << 10)
 942 #define S3C2410_GPH5_OUTP   (0x01 << 10)
 943 #define S3C2410_GPH5_RXD1   (0x02 << 10)
 944
 945 #define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
 946 #define S3C2410_GPH6_INP    (0x00 << 12)
 947 #define S3C2410_GPH6_OUTP   (0x01 << 12)
 948 #define S3C2410_GPH6_TXD2   (0x02 << 12)
 949 #define S3C2410_GPH6_nRTS1  (0x03 << 12)
 950
 951 #define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
 952 #define S3C2410_GPH7_INP    (0x00 << 14)
 953 #define S3C2410_GPH7_OUTP   (0x01 << 14)
 954 #define S3C2410_GPH7_RXD2   (0x02 << 14)
 955 #define S3C2410_GPH7_nCTS1  (0x03 << 14)
 956
 957 #define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
 958 #define S3C2410_GPH8_INP    (0x00 << 16)
 959 #define S3C2410_GPH8_OUTP   (0x01 << 16)
 960 #define S3C2410_GPH8_UCLK   (0x02 << 16)
 961
 962 #define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
 963 #define S3C2410_GPH9_INP      (0x00 << 18)
 964 #define S3C2410_GPH9_OUTP     (0x01 << 18)
 965 #define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
 966 #define S3C2442_GPH9_nSPICS0  (0x03 << 18)
 967
 968 #define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
 969 #define S3C2410_GPH10_INP     (0x00 << 20)
 970 #define S3C2410_GPH10_OUTP    (0x01 << 20)
 971 #define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
 972
 973 /* The S3C2412 and S3C2413 move the GPJ register set to after
 974  * GPH, which means all registers after 0x80 are now offset by 0x10
 975  * for the 2412/2413 from the 2410/2440/2442
 976 */
 977
 978 /* miscellaneous control */
 979 #define S3C2400_MISCCR     S3C2410_GPIOREG(0x54)
 980 #define S3C2410_MISCCR     S3C2410_GPIOREG(0x80)
 981 #define S3C2410_DCLKCON    S3C2410_GPIOREG(0x84)
 982
 983 #define S3C24XX_DCLKCON    S3C24XX_GPIOREG2(0x84)
 984
 985 /* see clock.h for dclk definitions */
 986
 987 /* pullup control on databus */
 988 #define S3C2410_MISCCR_SPUCR_HEN    (0<<0)
 989 #define S3C2410_MISCCR_SPUCR_HDIS   (1<<0)
 990 #define S3C2410_MISCCR_SPUCR_LEN    (0<<1)
 991 #define S3C2410_MISCCR_SPUCR_LDIS   (1<<1)
 992
 993 #define S3C2400_MISCCR_SPUCR_LEN    (0<<0)
 994 #define S3C2400_MISCCR_SPUCR_LDIS   (1<<0)
 995 #define S3C2400_MISCCR_SPUCR_HEN    (0<<1)
 996 #define S3C2400_MISCCR_SPUCR_HDIS   (1<<1)
 997
 998 #define S3C2400_MISCCR_HZ_STOPEN    (0<<2)
 999 #define S3C2400_MISCCR_HZ_STOPPREV  (1<<2)
1000
1001 #define S3C2410_MISCCR_USBDEV       (0<<3)
1002 #define S3C2410_MISCCR_USBHOST      (1<<3)
1003
1004 #define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
1005 #define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
1006 #define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
1007 #define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
1008 #define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
1009 #define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
1010 #define S3C2410_MISCCR_CLK0_MASK    (7<<4)
1011
1012 #define S3C2412_MISCCR_CLK0_RTC     (2<<4)
1013
1014 #define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
1015 #define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
1016 #define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
1017 #define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
1018 #define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
1019 #define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
1020 #define S3C2410_MISCCR_CLK1_MASK    (7<<8)
1021
1022 #define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
1023
1024 #define S3C2410_MISCCR_USBSUSPND0   (1<<12)
1025 #define S3C2410_MISCCR_USBSUSPND1   (1<<13)
1026
1027 #define S3C2410_MISCCR_nRSTCON      (1<<16)
1028
1029 #define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
1030 #define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
1031 #define S3C2410_MISCCR_nEN_SCLKE    (1<<19)     /* not 2412 */
1032 #define S3C2410_MISCCR_SDSLEEP      (7<<17)
1033
1034 /* external interrupt control... */
1035 /* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
1036  * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
1037  * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
1038  *
1039  * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
1040  *
1041  * Samsung datasheet p9-25
1042 */
1043 #define S3C2400_EXTINT0    S3C2410_GPIOREG(0x58)
1044 #define S3C2410_EXTINT0    S3C2410_GPIOREG(0x88)
1045 #define S3C2410_EXTINT1    S3C2410_GPIOREG(0x8C)
1046 #define S3C2410_EXTINT2    S3C2410_GPIOREG(0x90)
1047
1048 #define S3C24XX_EXTINT0    S3C24XX_GPIOREG2(0x88)
1049 #define S3C24XX_EXTINT1    S3C24XX_GPIOREG2(0x8C)
1050 #define S3C24XX_EXTINT2    S3C24XX_GPIOREG2(0x90)
1051
1052 /* values for S3C2410_EXTINT0/1/2 */
1053 #define S3C2410_EXTINT_LOWLEV    (0x00)
1054 #define S3C2410_EXTINT_HILEV     (0x01)
1055 #define S3C2410_EXTINT_FALLEDGE  (0x02)
1056 #define S3C2410_EXTINT_RISEEDGE  (0x04)
1057 #define S3C2410_EXTINT_BOTHEDGE  (0x06)
1058
1059 /* interrupt filtering conrrol for EINT16..EINT23 */
1060 #define S3C2410_EINFLT0    S3C2410_GPIOREG(0x94)
1061 #define S3C2410_EINFLT1    S3C2410_GPIOREG(0x98)
1062 #define S3C2410_EINFLT2    S3C2410_GPIOREG(0x9C)
1063 #define S3C2410_EINFLT3    S3C2410_GPIOREG(0xA0)
1064
1065 #define S3C24XX_EINFLT0    S3C24XX_GPIOREG2(0x94)
1066 #define S3C24XX_EINFLT1    S3C24XX_GPIOREG2(0x98)
1067 #define S3C24XX_EINFLT2    S3C24XX_GPIOREG2(0x9C)
1068 #define S3C24XX_EINFLT3    S3C24XX_GPIOREG2(0xA0)
1069
1070 /* values for interrupt filtering */
1071 #define S3C2410_EINTFLT_PCLK            (0x00)
1072 #define S3C2410_EINTFLT_EXTCLK          (1<<7)
1073 #define S3C2410_EINTFLT_WIDTHMSK(x)     ((x) & 0x3f)
1074
1075 /* removed EINTxxxx defs from here, not meant for this */
1076
1077 /* GSTATUS have miscellaneous information in them
1078  *
1079  * These move between s3c2410 and s3c2412 style systems.
1080  */
1081
1082 #define S3C2410_GSTATUS0   S3C2410_GPIOREG(0x0AC)
1083 #define S3C2410_GSTATUS1   S3C2410_GPIOREG(0x0B0)
1084 #define S3C2410_GSTATUS2   S3C2410_GPIOREG(0x0B4)
1085 #define S3C2410_GSTATUS3   S3C2410_GPIOREG(0x0B8)
1086 #define S3C2410_GSTATUS4   S3C2410_GPIOREG(0x0BC)
1087
1088 #define S3C2412_GSTATUS0   S3C2410_GPIOREG(0x0BC)
1089 #define S3C2412_GSTATUS1   S3C2410_GPIOREG(0x0C0)
1090 #define S3C2412_GSTATUS2   S3C2410_GPIOREG(0x0C4)
1091 #define S3C2412_GSTATUS3   S3C2410_GPIOREG(0x0C8)
1092 #define S3C2412_GSTATUS4   S3C2410_GPIOREG(0x0CC)
1093
1094 #define S3C24XX_GSTATUS0   S3C24XX_GPIOREG2(0x0AC)
1095 #define S3C24XX_GSTATUS1   S3C24XX_GPIOREG2(0x0B0)
1096 #define S3C24XX_GSTATUS2   S3C24XX_GPIOREG2(0x0B4)
1097 #define S3C24XX_GSTATUS3   S3C24XX_GPIOREG2(0x0B8)
1098 #define S3C24XX_GSTATUS4   S3C24XX_GPIOREG2(0x0BC)
1099
1100 #define S3C2410_GSTATUS0_nWAIT     (1<<3)
1101 #define S3C2410_GSTATUS0_NCON      (1<<2)
1102 #define S3C2410_GSTATUS0_RnB       (1<<1)
1103 #define S3C2410_GSTATUS0_nBATTFLT  (1<<0)
1104
1105 #define S3C2410_GSTATUS1_IDMASK    (0xffff0000)
1106 #define S3C2410_GSTATUS1_2410      (0x32410000)
1107 #define S3C2410_GSTATUS1_2412      (0x32412001)
1108 #define S3C2410_GSTATUS1_2440      (0x32440000)
1109 #define S3C2410_GSTATUS1_2442      (0x32440aaa)
1110
1111 #define S3C2410_GSTATUS2_WTRESET   (1<<2)
1112 #define S3C2410_GSTATUS2_OFFRESET  (1<<1)
1113 #define S3C2410_GSTATUS2_PONRESET  (1<<0)
1114
1115 /* open drain control register */
1116 #define S3C2400_OPENCR     S3C2410_GPIOREG(0x50)
1117
1118 #define S3C2400_OPENCR_OPC_RXD1DIS  (0<<0)
1119 #define S3C2400_OPENCR_OPC_RXD1EN   (1<<0)
1120 #define S3C2400_OPENCR_OPC_TXD1DIS  (0<<1)
1121 #define S3C2400_OPENCR_OPC_TXD1EN   (1<<1)
1122 #define S3C2400_OPENCR_OPC_CMDDIS   (0<<2)
1123 #define S3C2400_OPENCR_OPC_CMDEN    (1<<2)
1124 #define S3C2400_OPENCR_OPC_DATDIS   (0<<3)
1125 #define S3C2400_OPENCR_OPC_DATEN    (1<<3)
1126 #define S3C2400_OPENCR_OPC_MISODIS  (0<<4)
1127 #define S3C2400_OPENCR_OPC_MISOEN   (1<<4)
1128 #define S3C2400_OPENCR_OPC_MOSIDIS  (0<<5)
1129 #define S3C2400_OPENCR_OPC_MOSIEN   (1<<5)
1130
1131 /* 2412/2413 sleep configuration registers */
1132
1133 #define S3C2412_GPBSLPCON       S3C2410_GPIOREG(0x1C)
1134 #define S3C2412_GPCSLPCON       S3C2410_GPIOREG(0x2C)
1135 #define S3C2412_GPDSLPCON       S3C2410_GPIOREG(0x3C)
1136 #define S3C2412_GPFSLPCON       S3C2410_GPIOREG(0x5C)
1137 #define S3C2412_GPGSLPCON       S3C2410_GPIOREG(0x6C)
1138 #define S3C2412_GPHSLPCON       S3C2410_GPIOREG(0x7C)
1139
1140 /* definitions for each pin bit */
1141 #define S3C2412_GPIO_SLPCON_LOW  ( 0x00 )
1142 #define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
1143 #define S3C2412_GPIO_SLPCON_IN   ( 0x02 )
1144 #define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
1145
1146 #define S3C2412_SLPCON_LOW(x)   ( 0x00 << ((x) * 2))
1147 #define S3C2412_SLPCON_HIGH(x)  ( 0x01 << ((x) * 2))
1148 #define S3C2412_SLPCON_IN(x)    ( 0x02 << ((x) * 2))
1149 #define S3C2412_SLPCON_PULL(x)  ( 0x03 << ((x) * 2))
1150 #define S3C2412_SLPCON_EINT(x)  ( 0x02 << ((x) * 2))  /* only IRQ pins */
1151 #define S3C2412_SLPCON_MASK(x)  ( 0x03 << ((x) * 2))
1152
1153 #define S3C2412_SLPCON_ALL_LOW  (0x0)
1154 #define S3C2412_SLPCON_ALL_HIGH (0x11111111 | 0x44444444)
1155 #define S3C2412_SLPCON_ALL_IN   (0x22222222 | 0x88888888)
1156 #define S3C2412_SLPCON_ALL_PULL (0x33333333)
1157
1158 #endif  /* __ASM_ARCH_REGS_GPIO_H */
1159