Linux 3.3-rc6
[linux/fpc-iii.git] / drivers / dma / ste_dma40_ll.h
blob8d3d490968a3a8240b6f91e1631609a2425c3f4f
1 /*
2 * Copyright (C) ST-Ericsson SA 2007-2010
3 * Author: Per Friden <per.friden@stericsson.com> for ST-Ericsson SA
4 * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson SA
5 * License terms: GNU General Public License (GPL) version 2
6 */
7 #ifndef STE_DMA40_LL_H
8 #define STE_DMA40_LL_H
10 #define D40_DREG_PCBASE 0x400
11 #define D40_DREG_PCDELTA (8 * 4)
12 #define D40_LLI_ALIGN 16 /* LLI alignment must be 16 bytes. */
14 #define D40_LCPA_CHAN_SIZE 32
15 #define D40_LCPA_CHAN_DST_DELTA 16
17 #define D40_TYPE_TO_GROUP(type) (type / 16)
18 #define D40_TYPE_TO_EVENT(type) (type % 16)
19 #define D40_GROUP_SIZE 8
20 #define D40_PHYS_TO_GROUP(phys) ((phys & (D40_GROUP_SIZE - 1)) / 2)
22 /* Most bits of the CFG register are the same in log as in phy mode */
23 #define D40_SREG_CFG_MST_POS 15
24 #define D40_SREG_CFG_TIM_POS 14
25 #define D40_SREG_CFG_EIM_POS 13
26 #define D40_SREG_CFG_LOG_INCR_POS 12
27 #define D40_SREG_CFG_PHY_PEN_POS 12
28 #define D40_SREG_CFG_PSIZE_POS 10
29 #define D40_SREG_CFG_ESIZE_POS 8
30 #define D40_SREG_CFG_PRI_POS 7
31 #define D40_SREG_CFG_LBE_POS 6
32 #define D40_SREG_CFG_LOG_GIM_POS 5
33 #define D40_SREG_CFG_LOG_MFU_POS 4
34 #define D40_SREG_CFG_PHY_TM_POS 4
35 #define D40_SREG_CFG_PHY_EVTL_POS 0
38 /* Standard channel parameters - basic mode (element register) */
39 #define D40_SREG_ELEM_PHY_ECNT_POS 16
40 #define D40_SREG_ELEM_PHY_EIDX_POS 0
42 #define D40_SREG_ELEM_PHY_ECNT_MASK (0xFFFF << D40_SREG_ELEM_PHY_ECNT_POS)
44 /* Standard channel parameters - basic mode (Link register) */
45 #define D40_SREG_LNK_PHY_TCP_POS 0
46 #define D40_SREG_LNK_PHY_LMP_POS 1
47 #define D40_SREG_LNK_PHY_PRE_POS 2
49 * Source destination link address. Contains the
50 * 29-bit byte word aligned address of the reload area.
52 #define D40_SREG_LNK_PHYS_LNK_MASK 0xFFFFFFF8UL
54 /* Standard basic channel logical mode */
56 /* Element register */
57 #define D40_SREG_ELEM_LOG_ECNT_POS 16
58 #define D40_SREG_ELEM_LOG_LIDX_POS 8
59 #define D40_SREG_ELEM_LOG_LOS_POS 1
60 #define D40_SREG_ELEM_LOG_TCP_POS 0
62 #define D40_SREG_ELEM_LOG_LIDX_MASK (0xFF << D40_SREG_ELEM_LOG_LIDX_POS)
64 /* Link register */
65 #define D40_DEACTIVATE_EVENTLINE 0x0
66 #define D40_ACTIVATE_EVENTLINE 0x1
67 #define D40_EVENTLINE_POS(i) (2 * i)
68 #define D40_EVENTLINE_MASK(i) (0x3 << D40_EVENTLINE_POS(i))
70 /* Standard basic channel logical params in memory */
72 /* LCSP0 */
73 #define D40_MEM_LCSP0_ECNT_POS 16
74 #define D40_MEM_LCSP0_SPTR_POS 0
76 #define D40_MEM_LCSP0_ECNT_MASK (0xFFFF << D40_MEM_LCSP0_ECNT_POS)
77 #define D40_MEM_LCSP0_SPTR_MASK (0xFFFF << D40_MEM_LCSP0_SPTR_POS)
79 /* LCSP1 */
80 #define D40_MEM_LCSP1_SPTR_POS 16
81 #define D40_MEM_LCSP1_SCFG_MST_POS 15
82 #define D40_MEM_LCSP1_SCFG_TIM_POS 14
83 #define D40_MEM_LCSP1_SCFG_EIM_POS 13
84 #define D40_MEM_LCSP1_SCFG_INCR_POS 12
85 #define D40_MEM_LCSP1_SCFG_PSIZE_POS 10
86 #define D40_MEM_LCSP1_SCFG_ESIZE_POS 8
87 #define D40_MEM_LCSP1_SLOS_POS 1
88 #define D40_MEM_LCSP1_STCP_POS 0
90 #define D40_MEM_LCSP1_SPTR_MASK (0xFFFF << D40_MEM_LCSP1_SPTR_POS)
91 #define D40_MEM_LCSP1_SCFG_TIM_MASK (0x1 << D40_MEM_LCSP1_SCFG_TIM_POS)
92 #define D40_MEM_LCSP1_SCFG_INCR_MASK (0x1 << D40_MEM_LCSP1_SCFG_INCR_POS)
93 #define D40_MEM_LCSP1_SCFG_PSIZE_MASK (0x3 << D40_MEM_LCSP1_SCFG_PSIZE_POS)
94 #define D40_MEM_LCSP1_SLOS_MASK (0x7F << D40_MEM_LCSP1_SLOS_POS)
95 #define D40_MEM_LCSP1_STCP_MASK (0x1 << D40_MEM_LCSP1_STCP_POS)
97 /* LCSP2 */
98 #define D40_MEM_LCSP2_ECNT_POS 16
100 #define D40_MEM_LCSP2_ECNT_MASK (0xFFFF << D40_MEM_LCSP2_ECNT_POS)
102 /* LCSP3 */
103 #define D40_MEM_LCSP3_DCFG_MST_POS 15
104 #define D40_MEM_LCSP3_DCFG_TIM_POS 14
105 #define D40_MEM_LCSP3_DCFG_EIM_POS 13
106 #define D40_MEM_LCSP3_DCFG_INCR_POS 12
107 #define D40_MEM_LCSP3_DCFG_PSIZE_POS 10
108 #define D40_MEM_LCSP3_DCFG_ESIZE_POS 8
109 #define D40_MEM_LCSP3_DLOS_POS 1
110 #define D40_MEM_LCSP3_DTCP_POS 0
112 #define D40_MEM_LCSP3_DLOS_MASK (0x7F << D40_MEM_LCSP3_DLOS_POS)
113 #define D40_MEM_LCSP3_DTCP_MASK (0x1 << D40_MEM_LCSP3_DTCP_POS)
116 /* Standard channel parameter register offsets */
117 #define D40_CHAN_REG_SSCFG 0x00
118 #define D40_CHAN_REG_SSELT 0x04
119 #define D40_CHAN_REG_SSPTR 0x08
120 #define D40_CHAN_REG_SSLNK 0x0C
121 #define D40_CHAN_REG_SDCFG 0x10
122 #define D40_CHAN_REG_SDELT 0x14
123 #define D40_CHAN_REG_SDPTR 0x18
124 #define D40_CHAN_REG_SDLNK 0x1C
126 /* DMA Register Offsets */
127 #define D40_DREG_GCC 0x000
128 #define D40_DREG_GCC_ENA 0x1
129 /* This assumes that there are only 4 event groups */
130 #define D40_DREG_GCC_ENABLE_ALL 0xff01
131 #define D40_DREG_GCC_EVTGRP_POS 8
132 #define D40_DREG_GCC_SRC 0
133 #define D40_DREG_GCC_DST 1
134 #define D40_DREG_GCC_EVTGRP_ENA(x, y) \
135 (1 << (D40_DREG_GCC_EVTGRP_POS + 2 * x + y))
137 #define D40_DREG_PRTYP 0x004
138 #define D40_DREG_PRSME 0x008
139 #define D40_DREG_PRSMO 0x00C
140 #define D40_DREG_PRMSE 0x010
141 #define D40_DREG_PRMSO 0x014
142 #define D40_DREG_PRMOE 0x018
143 #define D40_DREG_PRMOO 0x01C
144 #define D40_DREG_PRMO_PCHAN_BASIC 0x1
145 #define D40_DREG_PRMO_PCHAN_MODULO 0x2
146 #define D40_DREG_PRMO_PCHAN_DOUBLE_DST 0x3
147 #define D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG 0x1
148 #define D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY 0x2
149 #define D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG 0x3
151 #define D40_DREG_LCPA 0x020
152 #define D40_DREG_LCLA 0x024
153 #define D40_DREG_ACTIVE 0x050
154 #define D40_DREG_ACTIVO 0x054
155 #define D40_DREG_FSEB1 0x058
156 #define D40_DREG_FSEB2 0x05C
157 #define D40_DREG_PCMIS 0x060
158 #define D40_DREG_PCICR 0x064
159 #define D40_DREG_PCTIS 0x068
160 #define D40_DREG_PCEIS 0x06C
161 #define D40_DREG_LCMIS0 0x080
162 #define D40_DREG_LCMIS1 0x084
163 #define D40_DREG_LCMIS2 0x088
164 #define D40_DREG_LCMIS3 0x08C
165 #define D40_DREG_LCICR0 0x090
166 #define D40_DREG_LCICR1 0x094
167 #define D40_DREG_LCICR2 0x098
168 #define D40_DREG_LCICR3 0x09C
169 #define D40_DREG_LCTIS0 0x0A0
170 #define D40_DREG_LCTIS1 0x0A4
171 #define D40_DREG_LCTIS2 0x0A8
172 #define D40_DREG_LCTIS3 0x0AC
173 #define D40_DREG_LCEIS0 0x0B0
174 #define D40_DREG_LCEIS1 0x0B4
175 #define D40_DREG_LCEIS2 0x0B8
176 #define D40_DREG_LCEIS3 0x0BC
177 #define D40_DREG_PSEG1 0x110
178 #define D40_DREG_PSEG2 0x114
179 #define D40_DREG_PSEG3 0x118
180 #define D40_DREG_PSEG4 0x11C
181 #define D40_DREG_PCEG1 0x120
182 #define D40_DREG_PCEG2 0x124
183 #define D40_DREG_PCEG3 0x128
184 #define D40_DREG_PCEG4 0x12C
185 #define D40_DREG_RSEG1 0x130
186 #define D40_DREG_RSEG2 0x134
187 #define D40_DREG_RSEG3 0x138
188 #define D40_DREG_RSEG4 0x13C
189 #define D40_DREG_RCEG1 0x140
190 #define D40_DREG_RCEG2 0x144
191 #define D40_DREG_RCEG3 0x148
192 #define D40_DREG_RCEG4 0x14C
193 #define D40_DREG_STFU 0xFC8
194 #define D40_DREG_ICFG 0xFCC
195 #define D40_DREG_PERIPHID0 0xFE0
196 #define D40_DREG_PERIPHID1 0xFE4
197 #define D40_DREG_PERIPHID2 0xFE8
198 #define D40_DREG_PERIPHID3 0xFEC
199 #define D40_DREG_CELLID0 0xFF0
200 #define D40_DREG_CELLID1 0xFF4
201 #define D40_DREG_CELLID2 0xFF8
202 #define D40_DREG_CELLID3 0xFFC
204 /* LLI related structures */
207 * struct d40_phy_lli - The basic configration register for each physical
208 * channel.
210 * @reg_cfg: The configuration register.
211 * @reg_elt: The element register.
212 * @reg_ptr: The pointer register.
213 * @reg_lnk: The link register.
215 * These registers are set up for both physical and logical transfers
216 * Note that the bit in each register means differently in logical and
217 * physical(standard) mode.
219 * This struct must be 16 bytes aligned, and only contain physical registers
220 * since it will be directly accessed by the DMA.
222 struct d40_phy_lli {
223 u32 reg_cfg;
224 u32 reg_elt;
225 u32 reg_ptr;
226 u32 reg_lnk;
230 * struct d40_phy_lli_bidir - struct for a transfer.
232 * @src: Register settings for src channel.
233 * @dst: Register settings for dst channel.
235 * All DMA transfers have a source and a destination.
238 struct d40_phy_lli_bidir {
239 struct d40_phy_lli *src;
240 struct d40_phy_lli *dst;
245 * struct d40_log_lli - logical lli configuration
247 * @lcsp02: Either maps to register lcsp0 if src or lcsp2 if dst.
248 * @lcsp13: Either maps to register lcsp1 if src or lcsp3 if dst.
250 * This struct must be 8 bytes aligned since it will be accessed directy by
251 * the DMA. Never add any none hw mapped registers to this struct.
254 struct d40_log_lli {
255 u32 lcsp02;
256 u32 lcsp13;
260 * struct d40_log_lli_bidir - For both src and dst
262 * @src: pointer to src lli configuration.
263 * @dst: pointer to dst lli configuration.
265 * You always have a src and a dst when doing DMA transfers.
268 struct d40_log_lli_bidir {
269 struct d40_log_lli *src;
270 struct d40_log_lli *dst;
274 * struct d40_log_lli_full - LCPA layout
276 * @lcsp0: Logical Channel Standard Param 0 - Src.
277 * @lcsp1: Logical Channel Standard Param 1 - Src.
278 * @lcsp2: Logical Channel Standard Param 2 - Dst.
279 * @lcsp3: Logical Channel Standard Param 3 - Dst.
281 * This struct maps to LCPA physical memory layout. Must map to
282 * the hw.
284 struct d40_log_lli_full {
285 u32 lcsp0;
286 u32 lcsp1;
287 u32 lcsp2;
288 u32 lcsp3;
292 * struct d40_def_lcsp - Default LCSP1 and LCSP3 settings
294 * @lcsp3: The default configuration for dst.
295 * @lcsp1: The default configuration for src.
297 struct d40_def_lcsp {
298 u32 lcsp3;
299 u32 lcsp1;
302 /* Physical channels */
304 enum d40_lli_flags {
305 LLI_ADDR_INC = 1 << 0,
306 LLI_TERM_INT = 1 << 1,
307 LLI_CYCLIC = 1 << 2,
308 LLI_LAST_LINK = 1 << 3,
311 void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
312 u32 *src_cfg,
313 u32 *dst_cfg,
314 bool is_log);
316 void d40_log_cfg(struct stedma40_chan_cfg *cfg,
317 u32 *lcsp1,
318 u32 *lcsp2);
320 int d40_phy_sg_to_lli(struct scatterlist *sg,
321 int sg_len,
322 dma_addr_t target,
323 struct d40_phy_lli *lli,
324 dma_addr_t lli_phys,
325 u32 reg_cfg,
326 struct stedma40_half_channel_info *info,
327 struct stedma40_half_channel_info *otherinfo,
328 unsigned long flags);
330 /* Logical channels */
332 int d40_log_sg_to_lli(struct scatterlist *sg,
333 int sg_len,
334 dma_addr_t dev_addr,
335 struct d40_log_lli *lli_sg,
336 u32 lcsp13, /* src or dst*/
337 u32 data_width1, u32 data_width2);
339 void d40_log_lli_lcpa_write(struct d40_log_lli_full *lcpa,
340 struct d40_log_lli *lli_dst,
341 struct d40_log_lli *lli_src,
342 int next, unsigned int flags);
344 void d40_log_lli_lcla_write(struct d40_log_lli *lcla,
345 struct d40_log_lli *lli_dst,
346 struct d40_log_lli *lli_src,
347 int next, unsigned int flags);
349 #endif /* STE_DMA40_LLI_H */