2 * (C) Copyright 2003-2004
3 * Humboldt Solutions Ltd, adrian@humboldt.co.uk.
5 * This is a combined i2c adapter and algorithm driver for the
6 * MPC107/Tsi107 PowerPC northbridge and processors that include
7 * the same I2C unit (8240, 8245, 85xx).
11 * This file is licensed under the terms of the GNU General Public
12 * License version 2. This program is licensed "as is" without any
13 * warranty of any kind, whether express or implied.
16 #include <linux/kernel.h>
17 #include <linux/module.h>
18 #include <linux/sched.h>
19 #include <linux/init.h>
20 #include <linux/of_platform.h>
21 #include <linux/of_i2c.h>
22 #include <linux/slab.h>
25 #include <linux/fsl_devices.h>
26 #include <linux/i2c.h>
27 #include <linux/interrupt.h>
28 #include <linux/delay.h>
30 #include <asm/mpc52xx.h>
31 #include <sysdev/fsl_soc.h>
33 #define DRV_NAME "mpc-i2c"
35 #define MPC_I2C_CLOCK_LEGACY 0
36 #define MPC_I2C_CLOCK_PRESERVE (~0U)
38 #define MPC_I2C_FDR 0x04
39 #define MPC_I2C_CR 0x08
40 #define MPC_I2C_SR 0x0c
41 #define MPC_I2C_DR 0x10
42 #define MPC_I2C_DFSRR 0x14
63 wait_queue_head_t queue
;
64 struct i2c_adapter adap
;
69 struct mpc_i2c_divider
{
71 u16 fdr
; /* including dfsrr */
75 void (*setup
)(struct device_node
*node
, struct mpc_i2c
*i2c
,
76 u32 clock
, u32 prescaler
);
80 static inline void writeccr(struct mpc_i2c
*i2c
, u32 x
)
82 writeb(x
, i2c
->base
+ MPC_I2C_CR
);
85 static irqreturn_t
mpc_i2c_isr(int irq
, void *dev_id
)
87 struct mpc_i2c
*i2c
= dev_id
;
88 if (readb(i2c
->base
+ MPC_I2C_SR
) & CSR_MIF
) {
89 /* Read again to allow register to stabilise */
90 i2c
->interrupt
= readb(i2c
->base
+ MPC_I2C_SR
);
91 writeb(0, i2c
->base
+ MPC_I2C_SR
);
97 /* Sometimes 9th clock pulse isn't generated, and slave doesn't release
98 * the bus, because it wants to send ACK.
99 * Following sequence of enabling/disabling and sending start/stop generates
100 * the 9 pulses, so it's all OK.
102 static void mpc_i2c_fixup(struct mpc_i2c
*i2c
)
105 u32 delay_val
= 1000000 / i2c
->real_clk
+ 1;
110 for (k
= 9; k
; k
--) {
112 writeccr(i2c
, CCR_MSTA
| CCR_MTX
| CCR_MEN
);
114 writeccr(i2c
, CCR_MEN
);
115 udelay(delay_val
<< 1);
119 static int i2c_wait(struct mpc_i2c
*i2c
, unsigned timeout
, int writing
)
121 unsigned long orig_jiffies
= jiffies
;
126 while (!(readb(i2c
->base
+ MPC_I2C_SR
) & CSR_MIF
)) {
128 if (time_after(jiffies
, orig_jiffies
+ timeout
)) {
129 dev_dbg(i2c
->dev
, "timeout\n");
135 x
= readb(i2c
->base
+ MPC_I2C_SR
);
136 writeb(0, i2c
->base
+ MPC_I2C_SR
);
139 result
= wait_event_timeout(i2c
->queue
,
140 (i2c
->interrupt
& CSR_MIF
), timeout
);
142 if (unlikely(!(i2c
->interrupt
& CSR_MIF
))) {
143 dev_dbg(i2c
->dev
, "wait timeout\n");
155 if (!(x
& CSR_MCF
)) {
156 dev_dbg(i2c
->dev
, "unfinished\n");
161 dev_dbg(i2c
->dev
, "MAL\n");
165 if (writing
&& (x
& CSR_RXAK
)) {
166 dev_dbg(i2c
->dev
, "No RXAK\n");
168 writeccr(i2c
, CCR_MEN
);
174 #if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
175 static const struct mpc_i2c_divider mpc_i2c_dividers_52xx
[] __devinitconst
= {
176 {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
177 {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
178 {36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28},
179 {52, 0x63}, {56, 0x29}, {60, 0x41}, {64, 0x2a},
180 {68, 0x07}, {72, 0x2b}, {80, 0x2c}, {88, 0x09},
181 {96, 0x2d}, {104, 0x0a}, {112, 0x2e}, {120, 0x81},
182 {128, 0x2f}, {136, 0x47}, {144, 0x0c}, {160, 0x30},
183 {176, 0x49}, {192, 0x31}, {208, 0x4a}, {224, 0x32},
184 {240, 0x0f}, {256, 0x33}, {272, 0x87}, {288, 0x10},
185 {320, 0x34}, {352, 0x89}, {384, 0x35}, {416, 0x8a},
186 {448, 0x36}, {480, 0x13}, {512, 0x37}, {576, 0x14},
187 {640, 0x38}, {768, 0x39}, {896, 0x3a}, {960, 0x17},
188 {1024, 0x3b}, {1152, 0x18}, {1280, 0x3c}, {1536, 0x3d},
189 {1792, 0x3e}, {1920, 0x1b}, {2048, 0x3f}, {2304, 0x1c},
190 {2560, 0x1d}, {3072, 0x1e}, {3584, 0x7e}, {3840, 0x1f},
191 {4096, 0x7f}, {4608, 0x5c}, {5120, 0x5d}, {6144, 0x5e},
192 {7168, 0xbe}, {7680, 0x5f}, {8192, 0xbf}, {9216, 0x9c},
193 {10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f}
196 static int __devinit
mpc_i2c_get_fdr_52xx(struct device_node
*node
, u32 clock
,
197 int prescaler
, u32
*real_clk
)
199 const struct mpc_i2c_divider
*div
= NULL
;
200 unsigned int pvr
= mfspr(SPRN_PVR
);
204 if (clock
== MPC_I2C_CLOCK_LEGACY
) {
205 /* see below - default fdr = 0x3f -> div = 2048 */
206 *real_clk
= mpc5xxx_get_bus_frequency(node
) / 2048;
210 /* Determine divider value */
211 divider
= mpc5xxx_get_bus_frequency(node
) / clock
;
214 * We want to choose an FDR/DFSR that generates an I2C bus speed that
215 * is equal to or lower than the requested speed.
217 for (i
= 0; i
< ARRAY_SIZE(mpc_i2c_dividers_52xx
); i
++) {
218 div
= &mpc_i2c_dividers_52xx
[i
];
219 /* Old MPC5200 rev A CPUs do not support the high bits */
220 if (div
->fdr
& 0xc0 && pvr
== 0x80822011)
222 if (div
->divider
>= divider
)
226 *real_clk
= mpc5xxx_get_bus_frequency(node
) / div
->divider
;
227 return (int)div
->fdr
;
230 static void __devinit
mpc_i2c_setup_52xx(struct device_node
*node
,
232 u32 clock
, u32 prescaler
)
236 if (clock
== MPC_I2C_CLOCK_PRESERVE
) {
237 dev_dbg(i2c
->dev
, "using fdr %d\n",
238 readb(i2c
->base
+ MPC_I2C_FDR
));
242 ret
= mpc_i2c_get_fdr_52xx(node
, clock
, prescaler
, &i2c
->real_clk
);
243 fdr
= (ret
>= 0) ? ret
: 0x3f; /* backward compatibility */
245 writeb(fdr
& 0xff, i2c
->base
+ MPC_I2C_FDR
);
248 dev_info(i2c
->dev
, "clock %u Hz (fdr=%d)\n", i2c
->real_clk
,
251 #else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */
252 static void __devinit
mpc_i2c_setup_52xx(struct device_node
*node
,
254 u32 clock
, u32 prescaler
)
257 #endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */
259 #ifdef CONFIG_PPC_MPC512x
260 static void __devinit
mpc_i2c_setup_512x(struct device_node
*node
,
262 u32 clock
, u32 prescaler
)
264 struct device_node
*node_ctrl
;
269 /* Enable I2C interrupts for mpc5121 */
270 node_ctrl
= of_find_compatible_node(NULL
, NULL
,
271 "fsl,mpc5121-i2c-ctrl");
273 ctrl
= of_iomap(node_ctrl
, 0);
275 /* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */
276 pval
= of_get_property(node
, "reg", NULL
);
277 idx
= (*pval
& 0xff) / 0x20;
278 setbits32(ctrl
, 1 << (24 + idx
* 2));
281 of_node_put(node_ctrl
);
284 /* The clock setup for the 52xx works also fine for the 512x */
285 mpc_i2c_setup_52xx(node
, i2c
, clock
, prescaler
);
287 #else /* CONFIG_PPC_MPC512x */
288 static void __devinit
mpc_i2c_setup_512x(struct device_node
*node
,
290 u32 clock
, u32 prescaler
)
293 #endif /* CONFIG_PPC_MPC512x */
295 #ifdef CONFIG_FSL_SOC
296 static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx
[] __devinitconst
= {
297 {160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123},
298 {288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102},
299 {416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127},
300 {544, 0x0b03}, {576, 0x0104}, {608, 0x1603}, {640, 0x0105},
301 {672, 0x2003}, {704, 0x0b05}, {736, 0x2b03}, {768, 0x0106},
302 {800, 0x3603}, {832, 0x0b06}, {896, 0x012a}, {960, 0x0107},
303 {1024, 0x012b}, {1088, 0x1607}, {1152, 0x0108}, {1216, 0x2b07},
304 {1280, 0x0109}, {1408, 0x1609}, {1536, 0x010a}, {1664, 0x160a},
305 {1792, 0x012e}, {1920, 0x010b}, {2048, 0x012f}, {2176, 0x2b0b},
306 {2304, 0x010c}, {2560, 0x010d}, {2816, 0x2b0d}, {3072, 0x010e},
307 {3328, 0x2b0e}, {3584, 0x0132}, {3840, 0x010f}, {4096, 0x0133},
308 {4608, 0x0110}, {5120, 0x0111}, {6144, 0x0112}, {7168, 0x0136},
309 {7680, 0x0113}, {8192, 0x0137}, {9216, 0x0114}, {10240, 0x0115},
310 {12288, 0x0116}, {14336, 0x013a}, {15360, 0x0117}, {16384, 0x013b},
311 {18432, 0x0118}, {20480, 0x0119}, {24576, 0x011a}, {28672, 0x013e},
312 {30720, 0x011b}, {32768, 0x013f}, {36864, 0x011c}, {40960, 0x011d},
313 {49152, 0x011e}, {61440, 0x011f}
316 static u32 __devinit
mpc_i2c_get_sec_cfg_8xxx(void)
318 struct device_node
*node
= NULL
;
322 node
= of_find_node_by_name(NULL
, "global-utilities");
324 const u32
*prop
= of_get_property(node
, "reg", NULL
);
327 * Map and check POR Device Status Register 2
328 * (PORDEVSR2) at 0xE0014
330 reg
= ioremap(get_immrbase() + *prop
+ 0x14, 0x4);
333 "Error: couldn't map PORDEVSR2\n");
335 val
= in_be32(reg
) & 0x00000080; /* sec-cfg */
345 static int __devinit
mpc_i2c_get_fdr_8xxx(struct device_node
*node
, u32 clock
,
346 u32 prescaler
, u32
*real_clk
)
348 const struct mpc_i2c_divider
*div
= NULL
;
352 if (clock
== MPC_I2C_CLOCK_LEGACY
) {
353 /* see below - default fdr = 0x1031 -> div = 16 * 3072 */
354 *real_clk
= fsl_get_sys_freq() / prescaler
/ (16 * 3072);
358 /* Determine proper divider value */
359 if (of_device_is_compatible(node
, "fsl,mpc8544-i2c"))
360 prescaler
= mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2;
364 divider
= fsl_get_sys_freq() / clock
/ prescaler
;
366 pr_debug("I2C: src_clock=%d clock=%d divider=%d\n",
367 fsl_get_sys_freq(), clock
, divider
);
370 * We want to choose an FDR/DFSR that generates an I2C bus speed that
371 * is equal to or lower than the requested speed.
373 for (i
= 0; i
< ARRAY_SIZE(mpc_i2c_dividers_8xxx
); i
++) {
374 div
= &mpc_i2c_dividers_8xxx
[i
];
375 if (div
->divider
>= divider
)
379 *real_clk
= fsl_get_sys_freq() / prescaler
/ div
->divider
;
380 return div
? (int)div
->fdr
: -EINVAL
;
383 static void __devinit
mpc_i2c_setup_8xxx(struct device_node
*node
,
385 u32 clock
, u32 prescaler
)
389 if (clock
== MPC_I2C_CLOCK_PRESERVE
) {
390 dev_dbg(i2c
->dev
, "using dfsrr %d, fdr %d\n",
391 readb(i2c
->base
+ MPC_I2C_DFSRR
),
392 readb(i2c
->base
+ MPC_I2C_FDR
));
396 ret
= mpc_i2c_get_fdr_8xxx(node
, clock
, prescaler
, &i2c
->real_clk
);
397 fdr
= (ret
>= 0) ? ret
: 0x1031; /* backward compatibility */
399 writeb(fdr
& 0xff, i2c
->base
+ MPC_I2C_FDR
);
400 writeb((fdr
>> 8) & 0xff, i2c
->base
+ MPC_I2C_DFSRR
);
403 dev_info(i2c
->dev
, "clock %d Hz (dfsrr=%d fdr=%d)\n",
404 i2c
->real_clk
, fdr
>> 8, fdr
& 0xff);
407 #else /* !CONFIG_FSL_SOC */
408 static void __devinit
mpc_i2c_setup_8xxx(struct device_node
*node
,
410 u32 clock
, u32 prescaler
)
413 #endif /* CONFIG_FSL_SOC */
415 static void mpc_i2c_start(struct mpc_i2c
*i2c
)
417 /* Clear arbitration */
418 writeb(0, i2c
->base
+ MPC_I2C_SR
);
420 writeccr(i2c
, CCR_MEN
);
423 static void mpc_i2c_stop(struct mpc_i2c
*i2c
)
425 writeccr(i2c
, CCR_MEN
);
428 static int mpc_write(struct mpc_i2c
*i2c
, int target
,
429 const u8
*data
, int length
, int restart
)
432 unsigned timeout
= i2c
->adap
.timeout
;
433 u32 flags
= restart
? CCR_RSTA
: 0;
435 /* Start as master */
436 writeccr(i2c
, CCR_MIEN
| CCR_MEN
| CCR_MSTA
| CCR_MTX
| flags
);
437 /* Write target byte */
438 writeb((target
<< 1), i2c
->base
+ MPC_I2C_DR
);
440 result
= i2c_wait(i2c
, timeout
, 1);
444 for (i
= 0; i
< length
; i
++) {
445 /* Write data byte */
446 writeb(data
[i
], i2c
->base
+ MPC_I2C_DR
);
448 result
= i2c_wait(i2c
, timeout
, 1);
456 static int mpc_read(struct mpc_i2c
*i2c
, int target
,
457 u8
*data
, int length
, int restart
)
459 unsigned timeout
= i2c
->adap
.timeout
;
461 u32 flags
= restart
? CCR_RSTA
: 0;
463 /* Switch to read - restart */
464 writeccr(i2c
, CCR_MIEN
| CCR_MEN
| CCR_MSTA
| CCR_MTX
| flags
);
465 /* Write target address byte - this time with the read flag set */
466 writeb((target
<< 1) | 1, i2c
->base
+ MPC_I2C_DR
);
468 result
= i2c_wait(i2c
, timeout
, 1);
474 writeccr(i2c
, CCR_MIEN
| CCR_MEN
| CCR_MSTA
| CCR_TXAK
);
476 writeccr(i2c
, CCR_MIEN
| CCR_MEN
| CCR_MSTA
);
478 readb(i2c
->base
+ MPC_I2C_DR
);
481 for (i
= 0; i
< length
; i
++) {
482 result
= i2c_wait(i2c
, timeout
, 0);
486 /* Generate txack on next to last byte */
488 writeccr(i2c
, CCR_MIEN
| CCR_MEN
| CCR_MSTA
| CCR_TXAK
);
489 /* Do not generate stop on last byte */
491 writeccr(i2c
, CCR_MIEN
| CCR_MEN
| CCR_MSTA
| CCR_MTX
);
492 data
[i
] = readb(i2c
->base
+ MPC_I2C_DR
);
498 static int mpc_xfer(struct i2c_adapter
*adap
, struct i2c_msg
*msgs
, int num
)
500 struct i2c_msg
*pmsg
;
503 unsigned long orig_jiffies
= jiffies
;
504 struct mpc_i2c
*i2c
= i2c_get_adapdata(adap
);
508 /* Allow bus up to 1s to become not busy */
509 while (readb(i2c
->base
+ MPC_I2C_SR
) & CSR_MBB
) {
510 if (signal_pending(current
)) {
511 dev_dbg(i2c
->dev
, "Interrupted\n");
515 if (time_after(jiffies
, orig_jiffies
+ HZ
)) {
516 u8 status
= readb(i2c
->base
+ MPC_I2C_SR
);
518 dev_dbg(i2c
->dev
, "timeout\n");
519 if ((status
& (CSR_MCF
| CSR_MBB
| CSR_RXAK
)) != 0) {
520 writeb(status
& ~CSR_MAL
,
521 i2c
->base
+ MPC_I2C_SR
);
529 for (i
= 0; ret
>= 0 && i
< num
; i
++) {
532 "Doing %s %d bytes to 0x%02x - %d of %d messages\n",
533 pmsg
->flags
& I2C_M_RD
? "read" : "write",
534 pmsg
->len
, pmsg
->addr
, i
+ 1, num
);
535 if (pmsg
->flags
& I2C_M_RD
)
537 mpc_read(i2c
, pmsg
->addr
, pmsg
->buf
, pmsg
->len
, i
);
540 mpc_write(i2c
, pmsg
->addr
, pmsg
->buf
, pmsg
->len
, i
);
543 return (ret
< 0) ? ret
: num
;
546 static u32
mpc_functionality(struct i2c_adapter
*adap
)
548 return I2C_FUNC_I2C
| I2C_FUNC_SMBUS_EMUL
;
551 static const struct i2c_algorithm mpc_algo
= {
552 .master_xfer
= mpc_xfer
,
553 .functionality
= mpc_functionality
,
556 static struct i2c_adapter mpc_ops
= {
557 .owner
= THIS_MODULE
,
558 .name
= "MPC adapter",
563 static const struct of_device_id mpc_i2c_of_match
[];
564 static int __devinit
fsl_i2c_probe(struct platform_device
*op
)
566 const struct of_device_id
*match
;
569 u32 clock
= MPC_I2C_CLOCK_LEGACY
;
573 match
= of_match_device(mpc_i2c_of_match
, &op
->dev
);
577 i2c
= kzalloc(sizeof(*i2c
), GFP_KERNEL
);
581 i2c
->dev
= &op
->dev
; /* for debug and error output */
583 init_waitqueue_head(&i2c
->queue
);
585 i2c
->base
= of_iomap(op
->dev
.of_node
, 0);
587 dev_err(i2c
->dev
, "failed to map controller\n");
592 i2c
->irq
= irq_of_parse_and_map(op
->dev
.of_node
, 0);
593 if (i2c
->irq
) { /* no i2c->irq implies polling */
594 result
= request_irq(i2c
->irq
, mpc_i2c_isr
,
595 IRQF_SHARED
, "i2c-mpc", i2c
);
597 dev_err(i2c
->dev
, "failed to attach interrupt\n");
602 if (of_get_property(op
->dev
.of_node
, "fsl,preserve-clocking", NULL
)) {
603 clock
= MPC_I2C_CLOCK_PRESERVE
;
605 prop
= of_get_property(op
->dev
.of_node
, "clock-frequency",
607 if (prop
&& plen
== sizeof(u32
))
612 struct mpc_i2c_data
*data
= match
->data
;
613 data
->setup(op
->dev
.of_node
, i2c
, clock
, data
->prescaler
);
615 /* Backwards compatibility */
616 if (of_get_property(op
->dev
.of_node
, "dfsrr", NULL
))
617 mpc_i2c_setup_8xxx(op
->dev
.of_node
, i2c
, clock
, 0);
620 prop
= of_get_property(op
->dev
.of_node
, "fsl,timeout", &plen
);
621 if (prop
&& plen
== sizeof(u32
)) {
622 mpc_ops
.timeout
= *prop
* HZ
/ 1000000;
623 if (mpc_ops
.timeout
< 5)
626 dev_info(i2c
->dev
, "timeout %u us\n", mpc_ops
.timeout
* 1000000 / HZ
);
628 dev_set_drvdata(&op
->dev
, i2c
);
631 i2c_set_adapdata(&i2c
->adap
, i2c
);
632 i2c
->adap
.dev
.parent
= &op
->dev
;
633 i2c
->adap
.dev
.of_node
= of_node_get(op
->dev
.of_node
);
635 result
= i2c_add_adapter(&i2c
->adap
);
637 dev_err(i2c
->dev
, "failed to add adapter\n");
640 of_i2c_register_devices(&i2c
->adap
);
645 dev_set_drvdata(&op
->dev
, NULL
);
646 free_irq(i2c
->irq
, i2c
);
648 irq_dispose_mapping(i2c
->irq
);
655 static int __devexit
fsl_i2c_remove(struct platform_device
*op
)
657 struct mpc_i2c
*i2c
= dev_get_drvdata(&op
->dev
);
659 i2c_del_adapter(&i2c
->adap
);
660 dev_set_drvdata(&op
->dev
, NULL
);
663 free_irq(i2c
->irq
, i2c
);
665 irq_dispose_mapping(i2c
->irq
);
671 static struct mpc_i2c_data mpc_i2c_data_512x __devinitdata
= {
672 .setup
= mpc_i2c_setup_512x
,
675 static struct mpc_i2c_data mpc_i2c_data_52xx __devinitdata
= {
676 .setup
= mpc_i2c_setup_52xx
,
679 static struct mpc_i2c_data mpc_i2c_data_8313 __devinitdata
= {
680 .setup
= mpc_i2c_setup_8xxx
,
683 static struct mpc_i2c_data mpc_i2c_data_8543 __devinitdata
= {
684 .setup
= mpc_i2c_setup_8xxx
,
688 static struct mpc_i2c_data mpc_i2c_data_8544 __devinitdata
= {
689 .setup
= mpc_i2c_setup_8xxx
,
693 static const struct of_device_id mpc_i2c_of_match
[] = {
694 {.compatible
= "mpc5200-i2c", .data
= &mpc_i2c_data_52xx
, },
695 {.compatible
= "fsl,mpc5200b-i2c", .data
= &mpc_i2c_data_52xx
, },
696 {.compatible
= "fsl,mpc5200-i2c", .data
= &mpc_i2c_data_52xx
, },
697 {.compatible
= "fsl,mpc5121-i2c", .data
= &mpc_i2c_data_512x
, },
698 {.compatible
= "fsl,mpc8313-i2c", .data
= &mpc_i2c_data_8313
, },
699 {.compatible
= "fsl,mpc8543-i2c", .data
= &mpc_i2c_data_8543
, },
700 {.compatible
= "fsl,mpc8544-i2c", .data
= &mpc_i2c_data_8544
, },
701 /* Backward compatibility */
702 {.compatible
= "fsl-i2c", },
705 MODULE_DEVICE_TABLE(of
, mpc_i2c_of_match
);
707 /* Structure for a device driver */
708 static struct platform_driver mpc_i2c_driver
= {
709 .probe
= fsl_i2c_probe
,
710 .remove
= __devexit_p(fsl_i2c_remove
),
712 .owner
= THIS_MODULE
,
714 .of_match_table
= mpc_i2c_of_match
,
718 module_platform_driver(mpc_i2c_driver
);
720 MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
721 MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and "
722 "MPC824x/83xx/85xx/86xx/512x/52xx processors");
723 MODULE_LICENSE("GPL");