?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 3.3-rc6
[linux/fpc-iii.git] / drivers / spi / spi-pxa2xx.c
blobdc25bee8d33f1d6f93deea0030712a681579b1d0
1 /*
2 * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17 */
18
19 #include <linux/init.h>
20 #include <linux/module.h>
21 #include <linux/device.h>
22 #include <linux/ioport.h>
23 #include <linux/errno.h>
24 #include <linux/interrupt.h>
25 #include <linux/platform_device.h>
26 #include <linux/spi/pxa2xx_spi.h>
27 #include <linux/dma-mapping.h>
28 #include <linux/spi/spi.h>
29 #include <linux/workqueue.h>
30 #include <linux/delay.h>
31 #include <linux/gpio.h>
32 #include <linux/slab.h>
33
34 #include <asm/io.h>
35 #include <asm/irq.h>
36 #include <asm/delay.h>
37
38
39 MODULE_AUTHOR("Stephen Street");
40 MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
41 MODULE_LICENSE("GPL");
42 MODULE_ALIAS("platform:pxa2xx-spi");
43
44 #define MAX_BUSES 3
45
46 #define TIMOUT_DFLT 1000
47
48 #define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
49 #define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
50 #define IS_DMA_ALIGNED(x) ((((u32)(x)) & 0x07) == 0)
51 #define MAX_DMA_LEN 8191
52 #define DMA_ALIGNMENT 8
53
54 /*
55 * for testing SSCR1 changes that require SSP restart, basically
56 * everything except the service and interrupt enables, the pxa270 developer
57 * manual says only SSCR1_SCFR, SSCR1_SPH, SSCR1_SPO need to be in this
58 * list, but the PXA255 dev man says all bits without really meaning the
59 * service and interrupt enables
60 */
61 #define SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \
62 | SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \
63 | SSCR1_SFRMDIR | SSCR1_RWOT | SSCR1_TRAIL \
64 | SSCR1_IFS | SSCR1_STRF | SSCR1_EFWR \
65 | SSCR1_RFT | SSCR1_TFT | SSCR1_MWDS \
66 | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
67
68 #define DEFINE_SSP_REG(reg, off) \
69 static inline u32 read_##reg(void const __iomem *p) \
70 { return __raw_readl(p + (off)); } \
71 \
72 static inline void write_##reg(u32 v, void __iomem *p) \
73 { __raw_writel(v, p + (off)); }
74
75 DEFINE_SSP_REG(SSCR0, 0x00)
76 DEFINE_SSP_REG(SSCR1, 0x04)
77 DEFINE_SSP_REG(SSSR, 0x08)
78 DEFINE_SSP_REG(SSITR, 0x0c)
79 DEFINE_SSP_REG(SSDR, 0x10)
80 DEFINE_SSP_REG(SSTO, 0x28)
81 DEFINE_SSP_REG(SSPSP, 0x2c)
82
83 #define START_STATE ((void*)0)
84 #define RUNNING_STATE ((void*)1)
85 #define DONE_STATE ((void*)2)
86 #define ERROR_STATE ((void*)-1)
87
88 #define QUEUE_RUNNING 0
89 #define QUEUE_STOPPED 1
90
91 struct driver_data {
92 /* Driver model hookup */
93 struct platform_device *pdev;
94
95 /* SSP Info */
96 struct ssp_device *ssp;
97
98 /* SPI framework hookup */
99 enum pxa_ssp_type ssp_type;
100 struct spi_master *master;
101
102 /* PXA hookup */
103 struct pxa2xx_spi_master *master_info;
104
105 /* DMA setup stuff */
106 int rx_channel;
107 int tx_channel;
108 u32 *null_dma_buf;
109
110 /* SSP register addresses */
111 void __iomem *ioaddr;
112 u32 ssdr_physical;
113
114 /* SSP masks*/
115 u32 dma_cr1;
116 u32 int_cr1;
117 u32 clear_sr;
118 u32 mask_sr;
119
120 /* Driver message queue */
121 struct workqueue_struct *workqueue;
122 struct work_struct pump_messages;
123 spinlock_t lock;
124 struct list_head queue;
125 int busy;
126 int run;
127
128 /* Message Transfer pump */
129 struct tasklet_struct pump_transfers;
130
131 /* Current message transfer state info */
132 struct spi_message* cur_msg;
133 struct spi_transfer* cur_transfer;
134 struct chip_data *cur_chip;
135 size_t len;
136 void *tx;
137 void *tx_end;
138 void *rx;
139 void *rx_end;
140 int dma_mapped;
141 dma_addr_t rx_dma;
142 dma_addr_t tx_dma;
143 size_t rx_map_len;
144 size_t tx_map_len;
145 u8 n_bytes;
146 u32 dma_width;
147 int (*write)(struct driver_data *drv_data);
148 int (*read)(struct driver_data *drv_data);
149 irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
150 void (*cs_control)(u32 command);
151 };
152
153 struct chip_data {
154 u32 cr0;
155 u32 cr1;
156 u32 psp;
157 u32 timeout;
158 u8 n_bytes;
159 u32 dma_width;
160 u32 dma_burst_size;
161 u32 threshold;
162 u32 dma_threshold;
163 u8 enable_dma;
164 u8 bits_per_word;
165 u32 speed_hz;
166 union {
167 int gpio_cs;
168 unsigned int frm;
169 };
170 int gpio_cs_inverted;
171 int (*write)(struct driver_data *drv_data);
172 int (*read)(struct driver_data *drv_data);
173 void (*cs_control)(u32 command);
174 };
175
176 static void pump_messages(struct work_struct *work);
177
178 static void cs_assert(struct driver_data *drv_data)
179 {
180 struct chip_data *chip = drv_data->cur_chip;
181
182 if (drv_data->ssp_type == CE4100_SSP) {
183 write_SSSR(drv_data->cur_chip->frm, drv_data->ioaddr);
184 return;
185 }
186
187 if (chip->cs_control) {
188 chip->cs_control(PXA2XX_CS_ASSERT);
189 return;
190 }
191
192 if (gpio_is_valid(chip->gpio_cs))
193 gpio_set_value(chip->gpio_cs, chip->gpio_cs_inverted);
194 }
195
196 static void cs_deassert(struct driver_data *drv_data)
197 {
198 struct chip_data *chip = drv_data->cur_chip;
199
200 if (drv_data->ssp_type == CE4100_SSP)
201 return;
202
203 if (chip->cs_control) {
204 chip->cs_control(PXA2XX_CS_DEASSERT);
205 return;
206 }
207
208 if (gpio_is_valid(chip->gpio_cs))
209 gpio_set_value(chip->gpio_cs, !chip->gpio_cs_inverted);
210 }
211
212 static void write_SSSR_CS(struct driver_data *drv_data, u32 val)
213 {
214 void __iomem *reg = drv_data->ioaddr;
215
216 if (drv_data->ssp_type == CE4100_SSP)
217 val |= read_SSSR(reg) & SSSR_ALT_FRM_MASK;
218
219 write_SSSR(val, reg);
220 }
221
222 static int pxa25x_ssp_comp(struct driver_data *drv_data)
223 {
224 if (drv_data->ssp_type == PXA25x_SSP)
225 return 1;
226 if (drv_data->ssp_type == CE4100_SSP)
227 return 1;
228 return 0;
229 }
230
231 static int flush(struct driver_data *drv_data)
232 {
233 unsigned long limit = loops_per_jiffy << 1;
234
235 void __iomem *reg = drv_data->ioaddr;
236
237 do {
238 while (read_SSSR(reg) & SSSR_RNE) {
239 read_SSDR(reg);
240 }
241 } while ((read_SSSR(reg) & SSSR_BSY) && --limit);
242 write_SSSR_CS(drv_data, SSSR_ROR);
243
244 return limit;
245 }
246
247 static int null_writer(struct driver_data *drv_data)
248 {
249 void __iomem *reg = drv_data->ioaddr;
250 u8 n_bytes = drv_data->n_bytes;
251
252 if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK)
253 || (drv_data->tx == drv_data->tx_end))
254 return 0;
255
256 write_SSDR(0, reg);
257 drv_data->tx += n_bytes;
258
259 return 1;
260 }
261
262 static int null_reader(struct driver_data *drv_data)
263 {
264 void __iomem *reg = drv_data->ioaddr;
265 u8 n_bytes = drv_data->n_bytes;
266
267 while ((read_SSSR(reg) & SSSR_RNE)
268 && (drv_data->rx < drv_data->rx_end)) {
269 read_SSDR(reg);
270 drv_data->rx += n_bytes;
271 }
272
273 return drv_data->rx == drv_data->rx_end;
274 }
275
276 static int u8_writer(struct driver_data *drv_data)
277 {
278 void __iomem *reg = drv_data->ioaddr;
279
280 if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK)
281 || (drv_data->tx == drv_data->tx_end))
282 return 0;
283
284 write_SSDR(*(u8 *)(drv_data->tx), reg);
285 ++drv_data->tx;
286
287 return 1;
288 }
289
290 static int u8_reader(struct driver_data *drv_data)
291 {
292 void __iomem *reg = drv_data->ioaddr;
293
294 while ((read_SSSR(reg) & SSSR_RNE)
295 && (drv_data->rx < drv_data->rx_end)) {
296 *(u8 *)(drv_data->rx) = read_SSDR(reg);
297 ++drv_data->rx;
298 }
299
300 return drv_data->rx == drv_data->rx_end;
301 }
302
303 static int u16_writer(struct driver_data *drv_data)
304 {
305 void __iomem *reg = drv_data->ioaddr;
306
307 if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK)
308 || (drv_data->tx == drv_data->tx_end))
309 return 0;
310
311 write_SSDR(*(u16 *)(drv_data->tx), reg);
312 drv_data->tx += 2;
313
314 return 1;
315 }
316
317 static int u16_reader(struct driver_data *drv_data)
318 {
319 void __iomem *reg = drv_data->ioaddr;
320
321 while ((read_SSSR(reg) & SSSR_RNE)
322 && (drv_data->rx < drv_data->rx_end)) {
323 *(u16 *)(drv_data->rx) = read_SSDR(reg);
324 drv_data->rx += 2;
325 }
326
327 return drv_data->rx == drv_data->rx_end;
328 }
329
330 static int u32_writer(struct driver_data *drv_data)
331 {
332 void __iomem *reg = drv_data->ioaddr;
333
334 if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK)
335 || (drv_data->tx == drv_data->tx_end))
336 return 0;
337
338 write_SSDR(*(u32 *)(drv_data->tx), reg);
339 drv_data->tx += 4;
340
341 return 1;
342 }
343
344 static int u32_reader(struct driver_data *drv_data)
345 {
346 void __iomem *reg = drv_data->ioaddr;
347
348 while ((read_SSSR(reg) & SSSR_RNE)
349 && (drv_data->rx < drv_data->rx_end)) {
350 *(u32 *)(drv_data->rx) = read_SSDR(reg);
351 drv_data->rx += 4;
352 }
353
354 return drv_data->rx == drv_data->rx_end;
355 }
356
357 static void *next_transfer(struct driver_data *drv_data)
358 {
359 struct spi_message *msg = drv_data->cur_msg;
360 struct spi_transfer *trans = drv_data->cur_transfer;
361
362 /* Move to next transfer */
363 if (trans->transfer_list.next != &msg->transfers) {
364 drv_data->cur_transfer =
365 list_entry(trans->transfer_list.next,
366 struct spi_transfer,
367 transfer_list);
368 return RUNNING_STATE;
369 } else
370 return DONE_STATE;
371 }
372
373 static int map_dma_buffers(struct driver_data *drv_data)
374 {
375 struct spi_message *msg = drv_data->cur_msg;
376 struct device *dev = &msg->spi->dev;
377
378 if (!drv_data->cur_chip->enable_dma)
379 return 0;
380
381 if (msg->is_dma_mapped)
382 return drv_data->rx_dma && drv_data->tx_dma;
383
384 if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
385 return 0;
386
387 /* Modify setup if rx buffer is null */
388 if (drv_data->rx == NULL) {
389 *drv_data->null_dma_buf = 0;
390 drv_data->rx = drv_data->null_dma_buf;
391 drv_data->rx_map_len = 4;
392 } else
393 drv_data->rx_map_len = drv_data->len;
394
395
396 /* Modify setup if tx buffer is null */
397 if (drv_data->tx == NULL) {
398 *drv_data->null_dma_buf = 0;
399 drv_data->tx = drv_data->null_dma_buf;
400 drv_data->tx_map_len = 4;
401 } else
402 drv_data->tx_map_len = drv_data->len;
403
404 /* Stream map the tx buffer. Always do DMA_TO_DEVICE first
405 * so we flush the cache *before* invalidating it, in case
406 * the tx and rx buffers overlap.
407 */
408 drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
409 drv_data->tx_map_len, DMA_TO_DEVICE);
410 if (dma_mapping_error(dev, drv_data->tx_dma))
411 return 0;
412
413 /* Stream map the rx buffer */
414 drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
415 drv_data->rx_map_len, DMA_FROM_DEVICE);
416 if (dma_mapping_error(dev, drv_data->rx_dma)) {
417 dma_unmap_single(dev, drv_data->tx_dma,
418 drv_data->tx_map_len, DMA_TO_DEVICE);
419 return 0;
420 }
421
422 return 1;
423 }
424
425 static void unmap_dma_buffers(struct driver_data *drv_data)
426 {
427 struct device *dev;
428
429 if (!drv_data->dma_mapped)
430 return;
431
432 if (!drv_data->cur_msg->is_dma_mapped) {
433 dev = &drv_data->cur_msg->spi->dev;
434 dma_unmap_single(dev, drv_data->rx_dma,
435 drv_data->rx_map_len, DMA_FROM_DEVICE);
436 dma_unmap_single(dev, drv_data->tx_dma,
437 drv_data->tx_map_len, DMA_TO_DEVICE);
438 }
439
440 drv_data->dma_mapped = 0;
441 }
442
443 /* caller already set message->status; dma and pio irqs are blocked */
444 static void giveback(struct driver_data *drv_data)
445 {
446 struct spi_transfer* last_transfer;
447 unsigned long flags;
448 struct spi_message *msg;
449
450 spin_lock_irqsave(&drv_data->lock, flags);
451 msg = drv_data->cur_msg;
452 drv_data->cur_msg = NULL;
453 drv_data->cur_transfer = NULL;
454 queue_work(drv_data->workqueue, &drv_data->pump_messages);
455 spin_unlock_irqrestore(&drv_data->lock, flags);
456
457 last_transfer = list_entry(msg->transfers.prev,
458 struct spi_transfer,
459 transfer_list);
460
461 /* Delay if requested before any change in chip select */
462 if (last_transfer->delay_usecs)
463 udelay(last_transfer->delay_usecs);
464
465 /* Drop chip select UNLESS cs_change is true or we are returning
466 * a message with an error, or next message is for another chip
467 */
468 if (!last_transfer->cs_change)
469 cs_deassert(drv_data);
470 else {
471 struct spi_message *next_msg;
472
473 /* Holding of cs was hinted, but we need to make sure
474 * the next message is for the same chip. Don't waste
475 * time with the following tests unless this was hinted.
476 *
477 * We cannot postpone this until pump_messages, because
478 * after calling msg->complete (below) the driver that
479 * sent the current message could be unloaded, which
480 * could invalidate the cs_control() callback...
481 */
482
483 /* get a pointer to the next message, if any */
484 spin_lock_irqsave(&drv_data->lock, flags);
485 if (list_empty(&drv_data->queue))
486 next_msg = NULL;
487 else
488 next_msg = list_entry(drv_data->queue.next,
489 struct spi_message, queue);
490 spin_unlock_irqrestore(&drv_data->lock, flags);
491
492 /* see if the next and current messages point
493 * to the same chip
494 */
495 if (next_msg && next_msg->spi != msg->spi)
496 next_msg = NULL;
497 if (!next_msg || msg->state == ERROR_STATE)
498 cs_deassert(drv_data);
499 }
500
501 msg->state = NULL;
502 if (msg->complete)
503 msg->complete(msg->context);
504
505 drv_data->cur_chip = NULL;
506 }
507
508 static int wait_ssp_rx_stall(void const __iomem *ioaddr)
509 {
510 unsigned long limit = loops_per_jiffy << 1;
511
512 while ((read_SSSR(ioaddr) & SSSR_BSY) && --limit)
513 cpu_relax();
514
515 return limit;
516 }
517
518 static int wait_dma_channel_stop(int channel)
519 {
520 unsigned long limit = loops_per_jiffy << 1;
521
522 while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit)
523 cpu_relax();
524
525 return limit;
526 }
527
528 static void dma_error_stop(struct driver_data *drv_data, const char *msg)
529 {
530 void __iomem *reg = drv_data->ioaddr;
531
532 /* Stop and reset */
533 DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
534 DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
535 write_SSSR_CS(drv_data, drv_data->clear_sr);
536 write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
537 if (!pxa25x_ssp_comp(drv_data))
538 write_SSTO(0, reg);
539 flush(drv_data);
540 write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
541
542 unmap_dma_buffers(drv_data);
543
544 dev_err(&drv_data->pdev->dev, "%s\n", msg);
545
546 drv_data->cur_msg->state = ERROR_STATE;
547 tasklet_schedule(&drv_data->pump_transfers);
548 }
549
550 static void dma_transfer_complete(struct driver_data *drv_data)
551 {
552 void __iomem *reg = drv_data->ioaddr;
553 struct spi_message *msg = drv_data->cur_msg;
554
555 /* Clear and disable interrupts on SSP and DMA channels*/
556 write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
557 write_SSSR_CS(drv_data, drv_data->clear_sr);
558 DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
559 DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
560
561 if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
562 dev_err(&drv_data->pdev->dev,
563 "dma_handler: dma rx channel stop failed\n");
564
565 if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
566 dev_err(&drv_data->pdev->dev,
567 "dma_transfer: ssp rx stall failed\n");
568
569 unmap_dma_buffers(drv_data);
570
571 /* update the buffer pointer for the amount completed in dma */
572 drv_data->rx += drv_data->len -
573 (DCMD(drv_data->rx_channel) & DCMD_LENGTH);
574
575 /* read trailing data from fifo, it does not matter how many
576 * bytes are in the fifo just read until buffer is full
577 * or fifo is empty, which ever occurs first */
578 drv_data->read(drv_data);
579
580 /* return count of what was actually read */
581 msg->actual_length += drv_data->len -
582 (drv_data->rx_end - drv_data->rx);
583
584 /* Transfer delays and chip select release are
585 * handled in pump_transfers or giveback
586 */
587
588 /* Move to next transfer */
589 msg->state = next_transfer(drv_data);
590
591 /* Schedule transfer tasklet */
592 tasklet_schedule(&drv_data->pump_transfers);
593 }
594
595 static void dma_handler(int channel, void *data)
596 {
597 struct driver_data *drv_data = data;
598 u32 irq_status = DCSR(channel) & DMA_INT_MASK;
599
600 if (irq_status & DCSR_BUSERR) {
601
602 if (channel == drv_data->tx_channel)
603 dma_error_stop(drv_data,
604 "dma_handler: "
605 "bad bus address on tx channel");
606 else
607 dma_error_stop(drv_data,
608 "dma_handler: "
609 "bad bus address on rx channel");
610 return;
611 }
612
613 /* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */
614 if ((channel == drv_data->tx_channel)
615 && (irq_status & DCSR_ENDINTR)
616 && (drv_data->ssp_type == PXA25x_SSP)) {
617
618 /* Wait for rx to stall */
619 if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
620 dev_err(&drv_data->pdev->dev,
621 "dma_handler: ssp rx stall failed\n");
622
623 /* finish this transfer, start the next */
624 dma_transfer_complete(drv_data);
625 }
626 }
627
628 static irqreturn_t dma_transfer(struct driver_data *drv_data)
629 {
630 u32 irq_status;
631 void __iomem *reg = drv_data->ioaddr;
632
633 irq_status = read_SSSR(reg) & drv_data->mask_sr;
634 if (irq_status & SSSR_ROR) {
635 dma_error_stop(drv_data, "dma_transfer: fifo overrun");
636 return IRQ_HANDLED;
637 }
638
639 /* Check for false positive timeout */
640 if ((irq_status & SSSR_TINT)
641 && (DCSR(drv_data->tx_channel) & DCSR_RUN)) {
642 write_SSSR(SSSR_TINT, reg);
643 return IRQ_HANDLED;
644 }
645
646 if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
647
648 /* Clear and disable timeout interrupt, do the rest in
649 * dma_transfer_complete */
650 if (!pxa25x_ssp_comp(drv_data))
651 write_SSTO(0, reg);
652
653 /* finish this transfer, start the next */
654 dma_transfer_complete(drv_data);
655
656 return IRQ_HANDLED;
657 }
658
659 /* Opps problem detected */
660 return IRQ_NONE;
661 }
662
663 static void reset_sccr1(struct driver_data *drv_data)
664 {
665 void __iomem *reg = drv_data->ioaddr;
666 struct chip_data *chip = drv_data->cur_chip;
667 u32 sccr1_reg;
668
669 sccr1_reg = read_SSCR1(reg) & ~drv_data->int_cr1;
670 sccr1_reg &= ~SSCR1_RFT;
671 sccr1_reg |= chip->threshold;
672 write_SSCR1(sccr1_reg, reg);
673 }
674
675 static void int_error_stop(struct driver_data *drv_data, const char* msg)
676 {
677 void __iomem *reg = drv_data->ioaddr;
678
679 /* Stop and reset SSP */
680 write_SSSR_CS(drv_data, drv_data->clear_sr);
681 reset_sccr1(drv_data);
682 if (!pxa25x_ssp_comp(drv_data))
683 write_SSTO(0, reg);
684 flush(drv_data);
685 write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
686
687 dev_err(&drv_data->pdev->dev, "%s\n", msg);
688
689 drv_data->cur_msg->state = ERROR_STATE;
690 tasklet_schedule(&drv_data->pump_transfers);
691 }
692
693 static void int_transfer_complete(struct driver_data *drv_data)
694 {
695 void __iomem *reg = drv_data->ioaddr;
696
697 /* Stop SSP */
698 write_SSSR_CS(drv_data, drv_data->clear_sr);
699 reset_sccr1(drv_data);
700 if (!pxa25x_ssp_comp(drv_data))
701 write_SSTO(0, reg);
702
703 /* Update total byte transferred return count actual bytes read */
704 drv_data->cur_msg->actual_length += drv_data->len -
705 (drv_data->rx_end - drv_data->rx);
706
707 /* Transfer delays and chip select release are
708 * handled in pump_transfers or giveback
709 */
710
711 /* Move to next transfer */
712 drv_data->cur_msg->state = next_transfer(drv_data);
713
714 /* Schedule transfer tasklet */
715 tasklet_schedule(&drv_data->pump_transfers);
716 }
717
718 static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
719 {
720 void __iomem *reg = drv_data->ioaddr;
721
722 u32 irq_mask = (read_SSCR1(reg) & SSCR1_TIE) ?
723 drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS;
724
725 u32 irq_status = read_SSSR(reg) & irq_mask;
726
727 if (irq_status & SSSR_ROR) {
728 int_error_stop(drv_data, "interrupt_transfer: fifo overrun");
729 return IRQ_HANDLED;
730 }
731
732 if (irq_status & SSSR_TINT) {
733 write_SSSR(SSSR_TINT, reg);
734 if (drv_data->read(drv_data)) {
735 int_transfer_complete(drv_data);
736 return IRQ_HANDLED;
737 }
738 }
739
740 /* Drain rx fifo, Fill tx fifo and prevent overruns */
741 do {
742 if (drv_data->read(drv_data)) {
743 int_transfer_complete(drv_data);
744 return IRQ_HANDLED;
745 }
746 } while (drv_data->write(drv_data));
747
748 if (drv_data->read(drv_data)) {
749 int_transfer_complete(drv_data);
750 return IRQ_HANDLED;
751 }
752
753 if (drv_data->tx == drv_data->tx_end) {
754 u32 bytes_left;
755 u32 sccr1_reg;
756
757 sccr1_reg = read_SSCR1(reg);
758 sccr1_reg &= ~SSCR1_TIE;
759
760 /*
761 * PXA25x_SSP has no timeout, set up rx threshould for the
762 * remaining RX bytes.
763 */
764 if (pxa25x_ssp_comp(drv_data)) {
765
766 sccr1_reg &= ~SSCR1_RFT;
767
768 bytes_left = drv_data->rx_end - drv_data->rx;
769 switch (drv_data->n_bytes) {
770 case 4:
771 bytes_left >>= 1;
772 case 2:
773 bytes_left >>= 1;
774 }
775
776 if (bytes_left > RX_THRESH_DFLT)
777 bytes_left = RX_THRESH_DFLT;
778
779 sccr1_reg |= SSCR1_RxTresh(bytes_left);
780 }
781 write_SSCR1(sccr1_reg, reg);
782 }
783
784 /* We did something */
785 return IRQ_HANDLED;
786 }
787
788 static irqreturn_t ssp_int(int irq, void *dev_id)
789 {
790 struct driver_data *drv_data = dev_id;
791 void __iomem *reg = drv_data->ioaddr;
792 u32 sccr1_reg = read_SSCR1(reg);
793 u32 mask = drv_data->mask_sr;
794 u32 status;
795
796 status = read_SSSR(reg);
797
798 /* Ignore possible writes if we don't need to write */
799 if (!(sccr1_reg & SSCR1_TIE))
800 mask &= ~SSSR_TFS;
801
802 if (!(status & mask))
803 return IRQ_NONE;
804
805 if (!drv_data->cur_msg) {
806
807 write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
808 write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
809 if (!pxa25x_ssp_comp(drv_data))
810 write_SSTO(0, reg);
811 write_SSSR_CS(drv_data, drv_data->clear_sr);
812
813 dev_err(&drv_data->pdev->dev, "bad message state "
814 "in interrupt handler\n");
815
816 /* Never fail */
817 return IRQ_HANDLED;
818 }
819
820 return drv_data->transfer_handler(drv_data);
821 }
822
823 static int set_dma_burst_and_threshold(struct chip_data *chip,
824 struct spi_device *spi,
825 u8 bits_per_word, u32 *burst_code,
826 u32 *threshold)
827 {
828 struct pxa2xx_spi_chip *chip_info =
829 (struct pxa2xx_spi_chip *)spi->controller_data;
830 int bytes_per_word;
831 int burst_bytes;
832 int thresh_words;
833 int req_burst_size;
834 int retval = 0;
835
836 /* Set the threshold (in registers) to equal the same amount of data
837 * as represented by burst size (in bytes). The computation below
838 * is (burst_size rounded up to nearest 8 byte, word or long word)
839 * divided by (bytes/register); the tx threshold is the inverse of
840 * the rx, so that there will always be enough data in the rx fifo
841 * to satisfy a burst, and there will always be enough space in the
842 * tx fifo to accept a burst (a tx burst will overwrite the fifo if
843 * there is not enough space), there must always remain enough empty
844 * space in the rx fifo for any data loaded to the tx fifo.
845 * Whenever burst_size (in bytes) equals bits/word, the fifo threshold
846 * will be 8, or half the fifo;
847 * The threshold can only be set to 2, 4 or 8, but not 16, because
848 * to burst 16 to the tx fifo, the fifo would have to be empty;
849 * however, the minimum fifo trigger level is 1, and the tx will
850 * request service when the fifo is at this level, with only 15 spaces.
851 */
852
853 /* find bytes/word */
854 if (bits_per_word <= 8)
855 bytes_per_word = 1;
856 else if (bits_per_word <= 16)
857 bytes_per_word = 2;
858 else
859 bytes_per_word = 4;
860
861 /* use struct pxa2xx_spi_chip->dma_burst_size if available */
862 if (chip_info)
863 req_burst_size = chip_info->dma_burst_size;
864 else {
865 switch (chip->dma_burst_size) {
866 default:
867 /* if the default burst size is not set,
868 * do it now */
869 chip->dma_burst_size = DCMD_BURST8;
870 case DCMD_BURST8:
871 req_burst_size = 8;
872 break;
873 case DCMD_BURST16:
874 req_burst_size = 16;
875 break;
876 case DCMD_BURST32:
877 req_burst_size = 32;
878 break;
879 }
880 }
881 if (req_burst_size <= 8) {
882 *burst_code = DCMD_BURST8;
883 burst_bytes = 8;
884 } else if (req_burst_size <= 16) {
885 if (bytes_per_word == 1) {
886 /* don't burst more than 1/2 the fifo */
887 *burst_code = DCMD_BURST8;
888 burst_bytes = 8;
889 retval = 1;
890 } else {
891 *burst_code = DCMD_BURST16;
892 burst_bytes = 16;
893 }
894 } else {
895 if (bytes_per_word == 1) {
896 /* don't burst more than 1/2 the fifo */
897 *burst_code = DCMD_BURST8;
898 burst_bytes = 8;
899 retval = 1;
900 } else if (bytes_per_word == 2) {
901 /* don't burst more than 1/2 the fifo */
902 *burst_code = DCMD_BURST16;
903 burst_bytes = 16;
904 retval = 1;
905 } else {
906 *burst_code = DCMD_BURST32;
907 burst_bytes = 32;
908 }
909 }
910
911 thresh_words = burst_bytes / bytes_per_word;
912
913 /* thresh_words will be between 2 and 8 */
914 *threshold = (SSCR1_RxTresh(thresh_words) & SSCR1_RFT)
915 | (SSCR1_TxTresh(16-thresh_words) & SSCR1_TFT);
916
917 return retval;
918 }
919
920 static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate)
921 {
922 unsigned long ssp_clk = clk_get_rate(ssp->clk);
923
924 if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
925 return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8;
926 else
927 return ((ssp_clk / rate - 1) & 0xfff) << 8;
928 }
929
930 static void pump_transfers(unsigned long data)
931 {
932 struct driver_data *drv_data = (struct driver_data *)data;
933 struct spi_message *message = NULL;
934 struct spi_transfer *transfer = NULL;
935 struct spi_transfer *previous = NULL;
936 struct chip_data *chip = NULL;
937 struct ssp_device *ssp = drv_data->ssp;
938 void __iomem *reg = drv_data->ioaddr;
939 u32 clk_div = 0;
940 u8 bits = 0;
941 u32 speed = 0;
942 u32 cr0;
943 u32 cr1;
944 u32 dma_thresh = drv_data->cur_chip->dma_threshold;
945 u32 dma_burst = drv_data->cur_chip->dma_burst_size;
946
947 /* Get current state information */
948 message = drv_data->cur_msg;
949 transfer = drv_data->cur_transfer;
950 chip = drv_data->cur_chip;
951
952 /* Handle for abort */
953 if (message->state == ERROR_STATE) {
954 message->status = -EIO;
955 giveback(drv_data);
956 return;
957 }
958
959 /* Handle end of message */
960 if (message->state == DONE_STATE) {
961 message->status = 0;
962 giveback(drv_data);
963 return;
964 }
965
966 /* Delay if requested at end of transfer before CS change */
967 if (message->state == RUNNING_STATE) {
968 previous = list_entry(transfer->transfer_list.prev,
969 struct spi_transfer,
970 transfer_list);
971 if (previous->delay_usecs)
972 udelay(previous->delay_usecs);
973
974 /* Drop chip select only if cs_change is requested */
975 if (previous->cs_change)
976 cs_deassert(drv_data);
977 }
978
979 /* Check for transfers that need multiple DMA segments */
980 if (transfer->len > MAX_DMA_LEN && chip->enable_dma) {
981
982 /* reject already-mapped transfers; PIO won't always work */
983 if (message->is_dma_mapped
984 || transfer->rx_dma || transfer->tx_dma) {
985 dev_err(&drv_data->pdev->dev,
986 "pump_transfers: mapped transfer length "
987 "of %u is greater than %d\n",
988 transfer->len, MAX_DMA_LEN);
989 message->status = -EINVAL;
990 giveback(drv_data);
991 return;
992 }
993
994 /* warn ... we force this to PIO mode */
995 if (printk_ratelimit())
996 dev_warn(&message->spi->dev, "pump_transfers: "
997 "DMA disabled for transfer length %ld "
998 "greater than %d\n",
999 (long)drv_data->len, MAX_DMA_LEN);
1000 }
1001
1002 /* Setup the transfer state based on the type of transfer */
1003 if (flush(drv_data) == 0) {
1004 dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
1005 message->status = -EIO;
1006 giveback(drv_data);
1007 return;
1008 }
1009 drv_data->n_bytes = chip->n_bytes;
1010 drv_data->dma_width = chip->dma_width;
1011 drv_data->tx = (void *)transfer->tx_buf;
1012 drv_data->tx_end = drv_data->tx + transfer->len;
1013 drv_data->rx = transfer->rx_buf;
1014 drv_data->rx_end = drv_data->rx + transfer->len;
1015 drv_data->rx_dma = transfer->rx_dma;
1016 drv_data->tx_dma = transfer->tx_dma;
1017 drv_data->len = transfer->len & DCMD_LENGTH;
1018 drv_data->write = drv_data->tx ? chip->write : null_writer;
1019 drv_data->read = drv_data->rx ? chip->read : null_reader;
1020
1021 /* Change speed and bit per word on a per transfer */
1022 cr0 = chip->cr0;
1023 if (transfer->speed_hz || transfer->bits_per_word) {
1024
1025 bits = chip->bits_per_word;
1026 speed = chip->speed_hz;
1027
1028 if (transfer->speed_hz)
1029 speed = transfer->speed_hz;
1030
1031 if (transfer->bits_per_word)
1032 bits = transfer->bits_per_word;
1033
1034 clk_div = ssp_get_clk_div(ssp, speed);
1035
1036 if (bits <= 8) {
1037 drv_data->n_bytes = 1;
1038 drv_data->dma_width = DCMD_WIDTH1;
1039 drv_data->read = drv_data->read != null_reader ?
1040 u8_reader : null_reader;
1041 drv_data->write = drv_data->write != null_writer ?
1042 u8_writer : null_writer;
1043 } else if (bits <= 16) {
1044 drv_data->n_bytes = 2;
1045 drv_data->dma_width = DCMD_WIDTH2;
1046 drv_data->read = drv_data->read != null_reader ?
1047 u16_reader : null_reader;
1048 drv_data->write = drv_data->write != null_writer ?
1049 u16_writer : null_writer;
1050 } else if (bits <= 32) {
1051 drv_data->n_bytes = 4;
1052 drv_data->dma_width = DCMD_WIDTH4;
1053 drv_data->read = drv_data->read != null_reader ?
1054 u32_reader : null_reader;
1055 drv_data->write = drv_data->write != null_writer ?
1056 u32_writer : null_writer;
1057 }
1058 /* if bits/word is changed in dma mode, then must check the
1059 * thresholds and burst also */
1060 if (chip->enable_dma) {
1061 if (set_dma_burst_and_threshold(chip, message->spi,
1062 bits, &dma_burst,
1063 &dma_thresh))
1064 if (printk_ratelimit())
1065 dev_warn(&message->spi->dev,
1066 "pump_transfers: "
1067 "DMA burst size reduced to "
1068 "match bits_per_word\n");
1069 }
1070
1071 cr0 = clk_div
1072 | SSCR0_Motorola
1073 | SSCR0_DataSize(bits > 16 ? bits - 16 : bits)
1074 | SSCR0_SSE
1075 | (bits > 16 ? SSCR0_EDSS : 0);
1076 }
1077
1078 message->state = RUNNING_STATE;
1079
1080 /* Try to map dma buffer and do a dma transfer if successful, but
1081 * only if the length is non-zero and less than MAX_DMA_LEN.
1082 *
1083 * Zero-length non-descriptor DMA is illegal on PXA2xx; force use
1084 * of PIO instead. Care is needed above because the transfer may
1085 * have have been passed with buffers that are already dma mapped.
1086 * A zero-length transfer in PIO mode will not try to write/read
1087 * to/from the buffers
1088 *
1089 * REVISIT large transfers are exactly where we most want to be
1090 * using DMA. If this happens much, split those transfers into
1091 * multiple DMA segments rather than forcing PIO.
1092 */
1093 drv_data->dma_mapped = 0;
1094 if (drv_data->len > 0 && drv_data->len <= MAX_DMA_LEN)
1095 drv_data->dma_mapped = map_dma_buffers(drv_data);
1096 if (drv_data->dma_mapped) {
1097
1098 /* Ensure we have the correct interrupt handler */
1099 drv_data->transfer_handler = dma_transfer;
1100
1101 /* Setup rx DMA Channel */
1102 DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
1103 DSADR(drv_data->rx_channel) = drv_data->ssdr_physical;
1104 DTADR(drv_data->rx_channel) = drv_data->rx_dma;
1105 if (drv_data->rx == drv_data->null_dma_buf)
1106 /* No target address increment */
1107 DCMD(drv_data->rx_channel) = DCMD_FLOWSRC
1108 | drv_data->dma_width
1109 | dma_burst
1110 | drv_data->len;
1111 else
1112 DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR
1113 | DCMD_FLOWSRC
1114 | drv_data->dma_width
1115 | dma_burst
1116 | drv_data->len;
1117
1118 /* Setup tx DMA Channel */
1119 DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
1120 DSADR(drv_data->tx_channel) = drv_data->tx_dma;
1121 DTADR(drv_data->tx_channel) = drv_data->ssdr_physical;
1122 if (drv_data->tx == drv_data->null_dma_buf)
1123 /* No source address increment */
1124 DCMD(drv_data->tx_channel) = DCMD_FLOWTRG
1125 | drv_data->dma_width
1126 | dma_burst
1127 | drv_data->len;
1128 else
1129 DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR
1130 | DCMD_FLOWTRG
1131 | drv_data->dma_width
1132 | dma_burst
1133 | drv_data->len;
1134
1135 /* Enable dma end irqs on SSP to detect end of transfer */
1136 if (drv_data->ssp_type == PXA25x_SSP)
1137 DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN;
1138
1139 /* Clear status and start DMA engine */
1140 cr1 = chip->cr1 | dma_thresh | drv_data->dma_cr1;
1141 write_SSSR(drv_data->clear_sr, reg);
1142 DCSR(drv_data->rx_channel) |= DCSR_RUN;
1143 DCSR(drv_data->tx_channel) |= DCSR_RUN;
1144 } else {
1145 /* Ensure we have the correct interrupt handler */
1146 drv_data->transfer_handler = interrupt_transfer;
1147
1148 /* Clear status */
1149 cr1 = chip->cr1 | chip->threshold | drv_data->int_cr1;
1150 write_SSSR_CS(drv_data, drv_data->clear_sr);
1151 }
1152
1153 /* see if we need to reload the config registers */
1154 if ((read_SSCR0(reg) != cr0)
1155 || (read_SSCR1(reg) & SSCR1_CHANGE_MASK) !=
1156 (cr1 & SSCR1_CHANGE_MASK)) {
1157
1158 /* stop the SSP, and update the other bits */
1159 write_SSCR0(cr0 & ~SSCR0_SSE, reg);
1160 if (!pxa25x_ssp_comp(drv_data))
1161 write_SSTO(chip->timeout, reg);
1162 /* first set CR1 without interrupt and service enables */
1163 write_SSCR1(cr1 & SSCR1_CHANGE_MASK, reg);
1164 /* restart the SSP */
1165 write_SSCR0(cr0, reg);
1166
1167 } else {
1168 if (!pxa25x_ssp_comp(drv_data))
1169 write_SSTO(chip->timeout, reg);
1170 }
1171
1172 cs_assert(drv_data);
1173
1174 /* after chip select, release the data by enabling service
1175 * requests and interrupts, without changing any mode bits */
1176 write_SSCR1(cr1, reg);
1177 }
1178
1179 static void pump_messages(struct work_struct *work)
1180 {
1181 struct driver_data *drv_data =
1182 container_of(work, struct driver_data, pump_messages);
1183 unsigned long flags;
1184
1185 /* Lock queue and check for queue work */
1186 spin_lock_irqsave(&drv_data->lock, flags);
1187 if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
1188 drv_data->busy = 0;
1189 spin_unlock_irqrestore(&drv_data->lock, flags);
1190 return;
1191 }
1192
1193 /* Make sure we are not already running a message */
1194 if (drv_data->cur_msg) {
1195 spin_unlock_irqrestore(&drv_data->lock, flags);
1196 return;
1197 }
1198
1199 /* Extract head of queue */
1200 drv_data->cur_msg = list_entry(drv_data->queue.next,
1201 struct spi_message, queue);
1202 list_del_init(&drv_data->cur_msg->queue);
1203
1204 /* Initial message state*/
1205 drv_data->cur_msg->state = START_STATE;
1206 drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
1207 struct spi_transfer,
1208 transfer_list);
1209
1210 /* prepare to setup the SSP, in pump_transfers, using the per
1211 * chip configuration */
1212 drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
1213
1214 /* Mark as busy and launch transfers */
1215 tasklet_schedule(&drv_data->pump_transfers);
1216
1217 drv_data->busy = 1;
1218 spin_unlock_irqrestore(&drv_data->lock, flags);
1219 }
1220
1221 static int transfer(struct spi_device *spi, struct spi_message *msg)
1222 {
1223 struct driver_data *drv_data = spi_master_get_devdata(spi->master);
1224 unsigned long flags;
1225
1226 spin_lock_irqsave(&drv_data->lock, flags);
1227
1228 if (drv_data->run == QUEUE_STOPPED) {
1229 spin_unlock_irqrestore(&drv_data->lock, flags);
1230 return -ESHUTDOWN;
1231 }
1232
1233 msg->actual_length = 0;
1234 msg->status = -EINPROGRESS;
1235 msg->state = START_STATE;
1236
1237 list_add_tail(&msg->queue, &drv_data->queue);
1238
1239 if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
1240 queue_work(drv_data->workqueue, &drv_data->pump_messages);
1241
1242 spin_unlock_irqrestore(&drv_data->lock, flags);
1243
1244 return 0;
1245 }
1246
1247 static int setup_cs(struct spi_device *spi, struct chip_data *chip,
1248 struct pxa2xx_spi_chip *chip_info)
1249 {
1250 int err = 0;
1251
1252 if (chip == NULL || chip_info == NULL)
1253 return 0;
1254
1255 /* NOTE: setup() can be called multiple times, possibly with
1256 * different chip_info, release previously requested GPIO
1257 */
1258 if (gpio_is_valid(chip->gpio_cs))
1259 gpio_free(chip->gpio_cs);
1260
1261 /* If (*cs_control) is provided, ignore GPIO chip select */
1262 if (chip_info->cs_control) {
1263 chip->cs_control = chip_info->cs_control;
1264 return 0;
1265 }
1266
1267 if (gpio_is_valid(chip_info->gpio_cs)) {
1268 err = gpio_request(chip_info->gpio_cs, "SPI_CS");
1269 if (err) {
1270 dev_err(&spi->dev, "failed to request chip select "
1271 "GPIO%d\n", chip_info->gpio_cs);
1272 return err;
1273 }
1274
1275 chip->gpio_cs = chip_info->gpio_cs;
1276 chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH;
1277
1278 err = gpio_direction_output(chip->gpio_cs,
1279 !chip->gpio_cs_inverted);
1280 }
1281
1282 return err;
1283 }
1284
1285 static int setup(struct spi_device *spi)
1286 {
1287 struct pxa2xx_spi_chip *chip_info = NULL;
1288 struct chip_data *chip;
1289 struct driver_data *drv_data = spi_master_get_devdata(spi->master);
1290 struct ssp_device *ssp = drv_data->ssp;
1291 unsigned int clk_div;
1292 uint tx_thres = TX_THRESH_DFLT;
1293 uint rx_thres = RX_THRESH_DFLT;
1294
1295 if (!pxa25x_ssp_comp(drv_data)
1296 && (spi->bits_per_word < 4 || spi->bits_per_word > 32)) {
1297 dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d "
1298 "b/w not 4-32 for type non-PXA25x_SSP\n",
1299 drv_data->ssp_type, spi->bits_per_word);
1300 return -EINVAL;
1301 } else if (pxa25x_ssp_comp(drv_data)
1302 && (spi->bits_per_word < 4
1303 || spi->bits_per_word > 16)) {
1304 dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d "
1305 "b/w not 4-16 for type PXA25x_SSP\n",
1306 drv_data->ssp_type, spi->bits_per_word);
1307 return -EINVAL;
1308 }
1309
1310 /* Only alloc on first setup */
1311 chip = spi_get_ctldata(spi);
1312 if (!chip) {
1313 chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
1314 if (!chip) {
1315 dev_err(&spi->dev,
1316 "failed setup: can't allocate chip data\n");
1317 return -ENOMEM;
1318 }
1319
1320 if (drv_data->ssp_type == CE4100_SSP) {
1321 if (spi->chip_select > 4) {
1322 dev_err(&spi->dev, "failed setup: "
1323 "cs number must not be > 4.\n");
1324 kfree(chip);
1325 return -EINVAL;
1326 }
1327
1328 chip->frm = spi->chip_select;
1329 } else
1330 chip->gpio_cs = -1;
1331 chip->enable_dma = 0;
1332 chip->timeout = TIMOUT_DFLT;
1333 chip->dma_burst_size = drv_data->master_info->enable_dma ?
1334 DCMD_BURST8 : 0;
1335 }
1336
1337 /* protocol drivers may change the chip settings, so...
1338 * if chip_info exists, use it */
1339 chip_info = spi->controller_data;
1340
1341 /* chip_info isn't always needed */
1342 chip->cr1 = 0;
1343 if (chip_info) {
1344 if (chip_info->timeout)
1345 chip->timeout = chip_info->timeout;
1346 if (chip_info->tx_threshold)
1347 tx_thres = chip_info->tx_threshold;
1348 if (chip_info->rx_threshold)
1349 rx_thres = chip_info->rx_threshold;
1350 chip->enable_dma = drv_data->master_info->enable_dma;
1351 chip->dma_threshold = 0;
1352 if (chip_info->enable_loopback)
1353 chip->cr1 = SSCR1_LBM;
1354 }
1355
1356 chip->threshold = (SSCR1_RxTresh(rx_thres) & SSCR1_RFT) |
1357 (SSCR1_TxTresh(tx_thres) & SSCR1_TFT);
1358
1359 /* set dma burst and threshold outside of chip_info path so that if
1360 * chip_info goes away after setting chip->enable_dma, the
1361 * burst and threshold can still respond to changes in bits_per_word */
1362 if (chip->enable_dma) {
1363 /* set up legal burst and threshold for dma */
1364 if (set_dma_burst_and_threshold(chip, spi, spi->bits_per_word,
1365 &chip->dma_burst_size,
1366 &chip->dma_threshold)) {
1367 dev_warn(&spi->dev, "in setup: DMA burst size reduced "
1368 "to match bits_per_word\n");
1369 }
1370 }
1371
1372 clk_div = ssp_get_clk_div(ssp, spi->max_speed_hz);
1373 chip->speed_hz = spi->max_speed_hz;
1374
1375 chip->cr0 = clk_div
1376 | SSCR0_Motorola
1377 | SSCR0_DataSize(spi->bits_per_word > 16 ?
1378 spi->bits_per_word - 16 : spi->bits_per_word)
1379 | SSCR0_SSE
1380 | (spi->bits_per_word > 16 ? SSCR0_EDSS : 0);
1381 chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH);
1382 chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0)
1383 | (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0);
1384
1385 /* NOTE: PXA25x_SSP _could_ use external clocking ... */
1386 if (!pxa25x_ssp_comp(drv_data))
1387 dev_dbg(&spi->dev, "%ld Hz actual, %s\n",
1388 clk_get_rate(ssp->clk)
1389 / (1 + ((chip->cr0 & SSCR0_SCR(0xfff)) >> 8)),
1390 chip->enable_dma ? "DMA" : "PIO");
1391 else
1392 dev_dbg(&spi->dev, "%ld Hz actual, %s\n",
1393 clk_get_rate(ssp->clk) / 2
1394 / (1 + ((chip->cr0 & SSCR0_SCR(0x0ff)) >> 8)),
1395 chip->enable_dma ? "DMA" : "PIO");
1396
1397 if (spi->bits_per_word <= 8) {
1398 chip->n_bytes = 1;
1399 chip->dma_width = DCMD_WIDTH1;
1400 chip->read = u8_reader;
1401 chip->write = u8_writer;
1402 } else if (spi->bits_per_word <= 16) {
1403 chip->n_bytes = 2;
1404 chip->dma_width = DCMD_WIDTH2;
1405 chip->read = u16_reader;
1406 chip->write = u16_writer;
1407 } else if (spi->bits_per_word <= 32) {
1408 chip->cr0 |= SSCR0_EDSS;
1409 chip->n_bytes = 4;
1410 chip->dma_width = DCMD_WIDTH4;
1411 chip->read = u32_reader;
1412 chip->write = u32_writer;
1413 } else {
1414 dev_err(&spi->dev, "invalid wordsize\n");
1415 return -ENODEV;
1416 }
1417 chip->bits_per_word = spi->bits_per_word;
1418
1419 spi_set_ctldata(spi, chip);
1420
1421 if (drv_data->ssp_type == CE4100_SSP)
1422 return 0;
1423
1424 return setup_cs(spi, chip, chip_info);
1425 }
1426
1427 static void cleanup(struct spi_device *spi)
1428 {
1429 struct chip_data *chip = spi_get_ctldata(spi);
1430 struct driver_data *drv_data = spi_master_get_devdata(spi->master);
1431
1432 if (!chip)
1433 return;
1434
1435 if (drv_data->ssp_type != CE4100_SSP && gpio_is_valid(chip->gpio_cs))
1436 gpio_free(chip->gpio_cs);
1437
1438 kfree(chip);
1439 }
1440
1441 static int __devinit init_queue(struct driver_data *drv_data)
1442 {
1443 INIT_LIST_HEAD(&drv_data->queue);
1444 spin_lock_init(&drv_data->lock);
1445
1446 drv_data->run = QUEUE_STOPPED;
1447 drv_data->busy = 0;
1448
1449 tasklet_init(&drv_data->pump_transfers,
1450 pump_transfers, (unsigned long)drv_data);
1451
1452 INIT_WORK(&drv_data->pump_messages, pump_messages);
1453 drv_data->workqueue = create_singlethread_workqueue(
1454 dev_name(drv_data->master->dev.parent));
1455 if (drv_data->workqueue == NULL)
1456 return -EBUSY;
1457
1458 return 0;
1459 }
1460
1461 static int start_queue(struct driver_data *drv_data)
1462 {
1463 unsigned long flags;
1464
1465 spin_lock_irqsave(&drv_data->lock, flags);
1466
1467 if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
1468 spin_unlock_irqrestore(&drv_data->lock, flags);
1469 return -EBUSY;
1470 }
1471
1472 drv_data->run = QUEUE_RUNNING;
1473 drv_data->cur_msg = NULL;
1474 drv_data->cur_transfer = NULL;
1475 drv_data->cur_chip = NULL;
1476 spin_unlock_irqrestore(&drv_data->lock, flags);
1477
1478 queue_work(drv_data->workqueue, &drv_data->pump_messages);
1479
1480 return 0;
1481 }
1482
1483 static int stop_queue(struct driver_data *drv_data)
1484 {
1485 unsigned long flags;
1486 unsigned limit = 500;
1487 int status = 0;
1488
1489 spin_lock_irqsave(&drv_data->lock, flags);
1490
1491 /* This is a bit lame, but is optimized for the common execution path.
1492 * A wait_queue on the drv_data->busy could be used, but then the common
1493 * execution path (pump_messages) would be required to call wake_up or
1494 * friends on every SPI message. Do this instead */
1495 drv_data->run = QUEUE_STOPPED;
1496 while ((!list_empty(&drv_data->queue) || drv_data->busy) && limit--) {
1497 spin_unlock_irqrestore(&drv_data->lock, flags);
1498 msleep(10);
1499 spin_lock_irqsave(&drv_data->lock, flags);
1500 }
1501
1502 if (!list_empty(&drv_data->queue) || drv_data->busy)
1503 status = -EBUSY;
1504
1505 spin_unlock_irqrestore(&drv_data->lock, flags);
1506
1507 return status;
1508 }
1509
1510 static int destroy_queue(struct driver_data *drv_data)
1511 {
1512 int status;
1513
1514 status = stop_queue(drv_data);
1515 /* we are unloading the module or failing to load (only two calls
1516 * to this routine), and neither call can handle a return value.
1517 * However, destroy_workqueue calls flush_workqueue, and that will
1518 * block until all work is done. If the reason that stop_queue
1519 * timed out is that the work will never finish, then it does no
1520 * good to call destroy_workqueue, so return anyway. */
1521 if (status != 0)
1522 return status;
1523
1524 destroy_workqueue(drv_data->workqueue);
1525
1526 return 0;
1527 }
1528
1529 static int __devinit pxa2xx_spi_probe(struct platform_device *pdev)
1530 {
1531 struct device *dev = &pdev->dev;
1532 struct pxa2xx_spi_master *platform_info;
1533 struct spi_master *master;
1534 struct driver_data *drv_data;
1535 struct ssp_device *ssp;
1536 int status;
1537
1538 platform_info = dev->platform_data;
1539
1540 ssp = pxa_ssp_request(pdev->id, pdev->name);
1541 if (ssp == NULL) {
1542 dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id);
1543 return -ENODEV;
1544 }
1545
1546 /* Allocate master with space for drv_data and null dma buffer */
1547 master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
1548 if (!master) {
1549 dev_err(&pdev->dev, "cannot alloc spi_master\n");
1550 pxa_ssp_free(ssp);
1551 return -ENOMEM;
1552 }
1553 drv_data = spi_master_get_devdata(master);
1554 drv_data->master = master;
1555 drv_data->master_info = platform_info;
1556 drv_data->pdev = pdev;
1557 drv_data->ssp = ssp;
1558
1559 master->dev.parent = &pdev->dev;
1560 master->dev.of_node = pdev->dev.of_node;
1561 /* the spi->mode bits understood by this driver: */
1562 master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
1563
1564 master->bus_num = pdev->id;
1565 master->num_chipselect = platform_info->num_chipselect;
1566 master->dma_alignment = DMA_ALIGNMENT;
1567 master->cleanup = cleanup;
1568 master->setup = setup;
1569 master->transfer = transfer;
1570
1571 drv_data->ssp_type = ssp->type;
1572 drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
1573 sizeof(struct driver_data)), 8);
1574
1575 drv_data->ioaddr = ssp->mmio_base;
1576 drv_data->ssdr_physical = ssp->phys_base + SSDR;
1577 if (pxa25x_ssp_comp(drv_data)) {
1578 drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
1579 drv_data->dma_cr1 = 0;
1580 drv_data->clear_sr = SSSR_ROR;
1581 drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR;
1582 } else {
1583 drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE;
1584 drv_data->dma_cr1 = SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE;
1585 drv_data->clear_sr = SSSR_ROR | SSSR_TINT;
1586 drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
1587 }
1588
1589 status = request_irq(ssp->irq, ssp_int, IRQF_SHARED, dev_name(dev),
1590 drv_data);
1591 if (status < 0) {
1592 dev_err(&pdev->dev, "cannot get IRQ %d\n", ssp->irq);
1593 goto out_error_master_alloc;
1594 }
1595
1596 /* Setup DMA if requested */
1597 drv_data->tx_channel = -1;
1598 drv_data->rx_channel = -1;
1599 if (platform_info->enable_dma) {
1600
1601 /* Get two DMA channels (rx and tx) */
1602 drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx",
1603 DMA_PRIO_HIGH,
1604 dma_handler,
1605 drv_data);
1606 if (drv_data->rx_channel < 0) {
1607 dev_err(dev, "problem (%d) requesting rx channel\n",
1608 drv_data->rx_channel);
1609 status = -ENODEV;
1610 goto out_error_irq_alloc;
1611 }
1612 drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx",
1613 DMA_PRIO_MEDIUM,
1614 dma_handler,
1615 drv_data);
1616 if (drv_data->tx_channel < 0) {
1617 dev_err(dev, "problem (%d) requesting tx channel\n",
1618 drv_data->tx_channel);
1619 status = -ENODEV;
1620 goto out_error_dma_alloc;
1621 }
1622
1623 DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel;
1624 DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel;
1625 }
1626
1627 /* Enable SOC clock */
1628 clk_enable(ssp->clk);
1629
1630 /* Load default SSP configuration */
1631 write_SSCR0(0, drv_data->ioaddr);
1632 write_SSCR1(SSCR1_RxTresh(RX_THRESH_DFLT) |
1633 SSCR1_TxTresh(TX_THRESH_DFLT),
1634 drv_data->ioaddr);
1635 write_SSCR0(SSCR0_SCR(2)
1636 | SSCR0_Motorola
1637 | SSCR0_DataSize(8),
1638 drv_data->ioaddr);
1639 if (!pxa25x_ssp_comp(drv_data))
1640 write_SSTO(0, drv_data->ioaddr);
1641 write_SSPSP(0, drv_data->ioaddr);
1642
1643 /* Initial and start queue */
1644 status = init_queue(drv_data);
1645 if (status != 0) {
1646 dev_err(&pdev->dev, "problem initializing queue\n");
1647 goto out_error_clock_enabled;
1648 }
1649 status = start_queue(drv_data);
1650 if (status != 0) {
1651 dev_err(&pdev->dev, "problem starting queue\n");
1652 goto out_error_clock_enabled;
1653 }
1654
1655 /* Register with the SPI framework */
1656 platform_set_drvdata(pdev, drv_data);
1657 status = spi_register_master(master);
1658 if (status != 0) {
1659 dev_err(&pdev->dev, "problem registering spi master\n");
1660 goto out_error_queue_alloc;
1661 }
1662
1663 return status;
1664
1665 out_error_queue_alloc:
1666 destroy_queue(drv_data);
1667
1668 out_error_clock_enabled:
1669 clk_disable(ssp->clk);
1670
1671 out_error_dma_alloc:
1672 if (drv_data->tx_channel != -1)
1673 pxa_free_dma(drv_data->tx_channel);
1674 if (drv_data->rx_channel != -1)
1675 pxa_free_dma(drv_data->rx_channel);
1676
1677 out_error_irq_alloc:
1678 free_irq(ssp->irq, drv_data);
1679
1680 out_error_master_alloc:
1681 spi_master_put(master);
1682 pxa_ssp_free(ssp);
1683 return status;
1684 }
1685
1686 static int pxa2xx_spi_remove(struct platform_device *pdev)
1687 {
1688 struct driver_data *drv_data = platform_get_drvdata(pdev);
1689 struct ssp_device *ssp;
1690 int status = 0;
1691
1692 if (!drv_data)
1693 return 0;
1694 ssp = drv_data->ssp;
1695
1696 /* Remove the queue */
1697 status = destroy_queue(drv_data);
1698 if (status != 0)
1699 /* the kernel does not check the return status of this
1700 * this routine (mod->exit, within the kernel). Therefore
1701 * nothing is gained by returning from here, the module is
1702 * going away regardless, and we should not leave any more
1703 * resources allocated than necessary. We cannot free the
1704 * message memory in drv_data->queue, but we can release the
1705 * resources below. I think the kernel should honor -EBUSY
1706 * returns but... */
1707 dev_err(&pdev->dev, "pxa2xx_spi_remove: workqueue will not "
1708 "complete, message memory not freed\n");
1709
1710 /* Disable the SSP at the peripheral and SOC level */
1711 write_SSCR0(0, drv_data->ioaddr);
1712 clk_disable(ssp->clk);
1713
1714 /* Release DMA */
1715 if (drv_data->master_info->enable_dma) {
1716 DRCMR(ssp->drcmr_rx) = 0;
1717 DRCMR(ssp->drcmr_tx) = 0;
1718 pxa_free_dma(drv_data->tx_channel);
1719 pxa_free_dma(drv_data->rx_channel);
1720 }
1721
1722 /* Release IRQ */
1723 free_irq(ssp->irq, drv_data);
1724
1725 /* Release SSP */
1726 pxa_ssp_free(ssp);
1727
1728 /* Disconnect from the SPI framework */
1729 spi_unregister_master(drv_data->master);
1730
1731 /* Prevent double remove */
1732 platform_set_drvdata(pdev, NULL);
1733
1734 return 0;
1735 }
1736
1737 static void pxa2xx_spi_shutdown(struct platform_device *pdev)
1738 {
1739 int status = 0;
1740
1741 if ((status = pxa2xx_spi_remove(pdev)) != 0)
1742 dev_err(&pdev->dev, "shutdown failed with %d\n", status);
1743 }
1744
1745 #ifdef CONFIG_PM
1746 static int pxa2xx_spi_suspend(struct device *dev)
1747 {
1748 struct driver_data *drv_data = dev_get_drvdata(dev);
1749 struct ssp_device *ssp = drv_data->ssp;
1750 int status = 0;
1751
1752 status = stop_queue(drv_data);
1753 if (status != 0)
1754 return status;
1755 write_SSCR0(0, drv_data->ioaddr);
1756 clk_disable(ssp->clk);
1757
1758 return 0;
1759 }
1760
1761 static int pxa2xx_spi_resume(struct device *dev)
1762 {
1763 struct driver_data *drv_data = dev_get_drvdata(dev);
1764 struct ssp_device *ssp = drv_data->ssp;
1765 int status = 0;
1766
1767 if (drv_data->rx_channel != -1)
1768 DRCMR(drv_data->ssp->drcmr_rx) =
1769 DRCMR_MAPVLD | drv_data->rx_channel;
1770 if (drv_data->tx_channel != -1)
1771 DRCMR(drv_data->ssp->drcmr_tx) =
1772 DRCMR_MAPVLD | drv_data->tx_channel;
1773
1774 /* Enable the SSP clock */
1775 clk_enable(ssp->clk);
1776
1777 /* Start the queue running */
1778 status = start_queue(drv_data);
1779 if (status != 0) {
1780 dev_err(dev, "problem starting queue (%d)\n", status);
1781 return status;
1782 }
1783
1784 return 0;
1785 }
1786
1787 static const struct dev_pm_ops pxa2xx_spi_pm_ops = {
1788 .suspend = pxa2xx_spi_suspend,
1789 .resume = pxa2xx_spi_resume,
1790 };
1791 #endif
1792
1793 static struct platform_driver driver = {
1794 .driver = {
1795 .name = "pxa2xx-spi",
1796 .owner = THIS_MODULE,
1797 #ifdef CONFIG_PM
1798 .pm = &pxa2xx_spi_pm_ops,
1799 #endif
1800 },
1801 .probe = pxa2xx_spi_probe,
1802 .remove = pxa2xx_spi_remove,
1803 .shutdown = pxa2xx_spi_shutdown,
1804 };
1805
1806 static int __init pxa2xx_spi_init(void)
1807 {
1808 return platform_driver_register(&driver);
1809 }
1810 subsys_initcall(pxa2xx_spi_init);
1811
1812 static void __exit pxa2xx_spi_exit(void)
1813 {
1814 platform_driver_unregister(&driver);
1815 }
1816 module_exit(pxa2xx_spi_exit);
Linux with added FPC-III support