1 /******************************************************************************
3 * Copyright(c) 2007-2008 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24 *****************************************************************************/
26 #include <linux/kernel.h>
27 #include <linux/module.h>
28 #include <linux/init.h>
29 #include <linux/pci.h>
30 #include <linux/dma-mapping.h>
31 #include <linux/delay.h>
32 #include <linux/skbuff.h>
33 #include <linux/netdevice.h>
34 #include <linux/wireless.h>
35 #include <net/mac80211.h>
36 #include <linux/etherdevice.h>
37 #include <asm/unaligned.h>
39 #include "iwl-eeprom.h"
44 #include "iwl-helpers.h"
45 #include "iwl-5000-hw.h"
47 #define IWL5000_UCODE_API "-1"
49 #define IWL5000_MODULE_FIRMWARE "iwlwifi-5000" IWL5000_UCODE_API ".ucode"
51 static const u16 iwl5000_default_queue_to_tx_fifo
[] = {
61 /* FIXME: same implementation as 4965 */
62 static int iwl5000_apm_stop_master(struct iwl_priv
*priv
)
67 spin_lock_irqsave(&priv
->lock
, flags
);
69 /* set stop master bit */
70 iwl_set_bit(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_STOP_MASTER
);
72 ret
= iwl_poll_bit(priv
, CSR_RESET
,
73 CSR_RESET_REG_FLAG_MASTER_DISABLED
,
74 CSR_RESET_REG_FLAG_MASTER_DISABLED
, 100);
79 spin_unlock_irqrestore(&priv
->lock
, flags
);
80 IWL_DEBUG_INFO("stop master\n");
86 static int iwl5000_apm_init(struct iwl_priv
*priv
)
90 iwl_set_bit(priv
, CSR_GIO_CHICKEN_BITS
,
91 CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER
);
93 /* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
94 iwl_set_bit(priv
, CSR_GIO_CHICKEN_BITS
,
95 CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX
);
97 /* Set FH wait threshold to maximum (HW error during stress W/A) */
98 iwl_set_bit(priv
, CSR_DBG_HPET_MEM_REG
, CSR_DBG_HPET_MEM_REG_VAL
);
100 /* enable HAP INTA to move device L1a -> L0s */
101 iwl_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
102 CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A
);
104 iwl_set_bit(priv
, CSR_ANA_PLL_CFG
, CSR50_ANA_PLL_CFG_VAL
);
106 /* set "initialization complete" bit to move adapter
107 * D0U* --> D0A* state */
108 iwl_set_bit(priv
, CSR_GP_CNTRL
, CSR_GP_CNTRL_REG_FLAG_INIT_DONE
);
110 /* wait for clock stabilization */
111 ret
= iwl_poll_bit(priv
, CSR_GP_CNTRL
,
112 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY
,
113 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY
, 25000);
115 IWL_DEBUG_INFO("Failed to init the card\n");
119 ret
= iwl_grab_nic_access(priv
);
124 iwl_write_prph(priv
, APMG_CLK_EN_REG
, APMG_CLK_VAL_DMA_CLK_RQT
);
128 /* disable L1-Active */
129 iwl_set_bits_prph(priv
, APMG_PCIDEV_STT_REG
,
130 APMG_PCIDEV_STT_VAL_L1_ACT_DIS
);
132 iwl_release_nic_access(priv
);
137 /* FIXME: this is identical to 4965 */
138 static void iwl5000_apm_stop(struct iwl_priv
*priv
)
142 iwl5000_apm_stop_master(priv
);
144 spin_lock_irqsave(&priv
->lock
, flags
);
146 iwl_set_bit(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_SW_RESET
);
150 /* clear "init complete" move adapter D0A* --> D0U state */
151 iwl_clear_bit(priv
, CSR_GP_CNTRL
, CSR_GP_CNTRL_REG_FLAG_INIT_DONE
);
153 spin_unlock_irqrestore(&priv
->lock
, flags
);
157 static int iwl5000_apm_reset(struct iwl_priv
*priv
)
162 iwl5000_apm_stop_master(priv
);
164 spin_lock_irqsave(&priv
->lock
, flags
);
166 iwl_set_bit(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_SW_RESET
);
171 /* FIXME: put here L1A -L0S w/a */
173 iwl_set_bit(priv
, CSR_ANA_PLL_CFG
, CSR50_ANA_PLL_CFG_VAL
);
175 /* set "initialization complete" bit to move adapter
176 * D0U* --> D0A* state */
177 iwl_set_bit(priv
, CSR_GP_CNTRL
, CSR_GP_CNTRL_REG_FLAG_INIT_DONE
);
179 /* wait for clock stabilization */
180 ret
= iwl_poll_bit(priv
, CSR_GP_CNTRL
,
181 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY
,
182 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY
, 25000);
184 IWL_DEBUG_INFO("Failed to init the card\n");
188 ret
= iwl_grab_nic_access(priv
);
193 iwl_write_prph(priv
, APMG_CLK_EN_REG
, APMG_CLK_VAL_DMA_CLK_RQT
);
197 /* disable L1-Active */
198 iwl_set_bits_prph(priv
, APMG_PCIDEV_STT_REG
,
199 APMG_PCIDEV_STT_VAL_L1_ACT_DIS
);
201 iwl_release_nic_access(priv
);
204 spin_unlock_irqrestore(&priv
->lock
, flags
);
210 static void iwl5000_nic_config(struct iwl_priv
*priv
)
216 spin_lock_irqsave(&priv
->lock
, flags
);
218 pci_read_config_word(priv
->pci_dev
, PCI_CFG_LINK_CTRL
, &link
);
220 /* L1 is enabled by BIOS */
221 if ((link
& PCI_CFG_LINK_CTRL_VAL_L1_EN
) == PCI_CFG_LINK_CTRL_VAL_L1_EN
)
222 /* disable L0S disabled L1A enabled */
223 iwl_set_bit(priv
, CSR_GIO_REG
, CSR_GIO_REG_VAL_L0S_ENABLED
);
225 /* L0S enabled L1A disabled */
226 iwl_clear_bit(priv
, CSR_GIO_REG
, CSR_GIO_REG_VAL_L0S_ENABLED
);
228 radio_cfg
= iwl_eeprom_query16(priv
, EEPROM_RADIO_CONFIG
);
230 /* write radio config values to register */
231 if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg
) < EEPROM_5000_RF_CFG_TYPE_MAX
)
232 iwl_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
233 EEPROM_RF_CFG_TYPE_MSK(radio_cfg
) |
234 EEPROM_RF_CFG_STEP_MSK(radio_cfg
) |
235 EEPROM_RF_CFG_DASH_MSK(radio_cfg
));
237 /* set CSR_HW_CONFIG_REG for uCode use */
238 iwl_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
239 CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI
|
240 CSR_HW_IF_CONFIG_REG_BIT_MAC_SI
);
242 /* W/A : NIC is stuck in a reset state after Early PCIe power off
243 * (PCIe power is lost before PERST# is asserted),
244 * causing ME FW to lose ownership and not being able to obtain it back.
246 iwl_grab_nic_access(priv
);
247 iwl_set_bits_mask_prph(priv
, APMG_PS_CTRL_REG
,
248 APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS
,
249 ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS
);
250 iwl_release_nic_access(priv
);
252 spin_unlock_irqrestore(&priv
->lock
, flags
);
260 static u32
eeprom_indirect_address(const struct iwl_priv
*priv
, u32 address
)
264 if ((address
& INDIRECT_ADDRESS
) == 0)
267 switch (address
& INDIRECT_TYPE_MSK
) {
269 offset
= iwl_eeprom_query16(priv
, EEPROM_5000_LINK_HOST
);
271 case INDIRECT_GENERAL
:
272 offset
= iwl_eeprom_query16(priv
, EEPROM_5000_LINK_GENERAL
);
274 case INDIRECT_REGULATORY
:
275 offset
= iwl_eeprom_query16(priv
, EEPROM_5000_LINK_REGULATORY
);
277 case INDIRECT_CALIBRATION
:
278 offset
= iwl_eeprom_query16(priv
, EEPROM_5000_LINK_CALIBRATION
);
280 case INDIRECT_PROCESS_ADJST
:
281 offset
= iwl_eeprom_query16(priv
, EEPROM_5000_LINK_PROCESS_ADJST
);
283 case INDIRECT_OTHERS
:
284 offset
= iwl_eeprom_query16(priv
, EEPROM_5000_LINK_OTHERS
);
287 IWL_ERROR("illegal indirect type: 0x%X\n",
288 address
& INDIRECT_TYPE_MSK
);
292 /* translate the offset from words to byte */
293 return (address
& ADDRESS_MSK
) + (offset
<< 1);
296 static u16
iwl5000_eeprom_calib_version(struct iwl_priv
*priv
)
298 struct iwl_eeprom_calib_hdr
{
304 hdr
= (struct iwl_eeprom_calib_hdr
*)iwl_eeprom_query_addr(priv
,
305 EEPROM_5000_CALIB_ALL
);
310 static void iwl5000_gain_computation(struct iwl_priv
*priv
,
311 u32 average_noise
[NUM_RX_CHAINS
],
312 u16 min_average_noise_antenna_i
,
313 u32 min_average_noise
)
317 struct iwl_chain_noise_data
*data
= &priv
->chain_noise_data
;
319 /* Find Gain Code for the antennas B and C */
320 for (i
= 1; i
< NUM_RX_CHAINS
; i
++) {
321 if ((data
->disconn_array
[i
])) {
322 data
->delta_gain_code
[i
] = 0;
325 delta_g
= (1000 * ((s32
)average_noise
[0] -
326 (s32
)average_noise
[i
])) / 1500;
327 /* bound gain by 2 bits value max, 3rd bit is sign */
328 data
->delta_gain_code
[i
] =
329 min(abs(delta_g
), CHAIN_NOISE_MAX_DELTA_GAIN_CODE
);
332 /* set negative sign */
333 data
->delta_gain_code
[i
] |= (1 << 2);
336 IWL_DEBUG_CALIB("Delta gains: ANT_B = %d ANT_C = %d\n",
337 data
->delta_gain_code
[1], data
->delta_gain_code
[2]);
339 if (!data
->radio_write
) {
340 struct iwl_calib_chain_noise_gain_cmd cmd
;
342 memset(&cmd
, 0, sizeof(cmd
));
344 cmd
.hdr
.op_code
= IWL_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD
;
345 cmd
.hdr
.first_group
= 0;
346 cmd
.hdr
.groups_num
= 1;
347 cmd
.hdr
.data_valid
= 1;
348 cmd
.delta_gain_1
= data
->delta_gain_code
[1];
349 cmd
.delta_gain_2
= data
->delta_gain_code
[2];
350 iwl_send_cmd_pdu_async(priv
, REPLY_PHY_CALIBRATION_CMD
,
351 sizeof(cmd
), &cmd
, NULL
);
353 data
->radio_write
= 1;
354 data
->state
= IWL_CHAIN_NOISE_CALIBRATED
;
357 data
->chain_noise_a
= 0;
358 data
->chain_noise_b
= 0;
359 data
->chain_noise_c
= 0;
360 data
->chain_signal_a
= 0;
361 data
->chain_signal_b
= 0;
362 data
->chain_signal_c
= 0;
363 data
->beacon_count
= 0;
366 static void iwl5000_chain_noise_reset(struct iwl_priv
*priv
)
368 struct iwl_chain_noise_data
*data
= &priv
->chain_noise_data
;
371 if ((data
->state
== IWL_CHAIN_NOISE_ALIVE
) && iwl_is_associated(priv
)) {
372 struct iwl_calib_chain_noise_reset_cmd cmd
;
373 memset(&cmd
, 0, sizeof(cmd
));
375 cmd
.hdr
.op_code
= IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD
;
376 cmd
.hdr
.first_group
= 0;
377 cmd
.hdr
.groups_num
= 1;
378 cmd
.hdr
.data_valid
= 1;
379 ret
= iwl_send_cmd_pdu(priv
, REPLY_PHY_CALIBRATION_CMD
,
382 IWL_ERROR("Could not send REPLY_PHY_CALIBRATION_CMD\n");
383 data
->state
= IWL_CHAIN_NOISE_ACCUMULATE
;
384 IWL_DEBUG_CALIB("Run chain_noise_calibrate\n");
388 static void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info
*info
,
391 if ((info
->control
.rates
[0].flags
& IEEE80211_TX_RC_USE_RTS_CTS
) ||
392 (info
->control
.rates
[0].flags
& IEEE80211_TX_RC_USE_CTS_PROTECT
))
393 *tx_flags
|= TX_CMD_FLG_RTS_CTS_MSK
;
395 *tx_flags
&= ~TX_CMD_FLG_RTS_CTS_MSK
;
398 static struct iwl_sensitivity_ranges iwl5000_sensitivity
= {
401 .auto_corr_min_ofdm
= 90,
402 .auto_corr_min_ofdm_mrc
= 170,
403 .auto_corr_min_ofdm_x1
= 120,
404 .auto_corr_min_ofdm_mrc_x1
= 240,
406 .auto_corr_max_ofdm
= 120,
407 .auto_corr_max_ofdm_mrc
= 210,
408 .auto_corr_max_ofdm_x1
= 155,
409 .auto_corr_max_ofdm_mrc_x1
= 290,
411 .auto_corr_min_cck
= 125,
412 .auto_corr_max_cck
= 200,
413 .auto_corr_min_cck_mrc
= 170,
414 .auto_corr_max_cck_mrc
= 400,
419 static const u8
*iwl5000_eeprom_query_addr(const struct iwl_priv
*priv
,
422 u32 address
= eeprom_indirect_address(priv
, offset
);
423 BUG_ON(address
>= priv
->cfg
->eeprom_size
);
424 return &priv
->eeprom
[address
];
430 static int iwl5000_set_Xtal_calib(struct iwl_priv
*priv
)
432 struct iwl_calib_xtal_freq_cmd cmd
;
433 u16
*xtal_calib
= (u16
*)iwl_eeprom_query_addr(priv
, EEPROM_5000_XTAL
);
435 cmd
.hdr
.op_code
= IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD
;
436 cmd
.hdr
.first_group
= 0;
437 cmd
.hdr
.groups_num
= 1;
438 cmd
.hdr
.data_valid
= 1;
439 cmd
.cap_pin1
= (u8
)xtal_calib
[0];
440 cmd
.cap_pin2
= (u8
)xtal_calib
[1];
441 return iwl_calib_set(&priv
->calib_results
[IWL_CALIB_XTAL
],
442 (u8
*)&cmd
, sizeof(cmd
));
445 static int iwl5000_send_calib_cfg(struct iwl_priv
*priv
)
447 struct iwl_calib_cfg_cmd calib_cfg_cmd
;
448 struct iwl_host_cmd cmd
= {
449 .id
= CALIBRATION_CFG_CMD
,
450 .len
= sizeof(struct iwl_calib_cfg_cmd
),
451 .data
= &calib_cfg_cmd
,
454 memset(&calib_cfg_cmd
, 0, sizeof(calib_cfg_cmd
));
455 calib_cfg_cmd
.ucd_calib_cfg
.once
.is_enable
= IWL_CALIB_INIT_CFG_ALL
;
456 calib_cfg_cmd
.ucd_calib_cfg
.once
.start
= IWL_CALIB_INIT_CFG_ALL
;
457 calib_cfg_cmd
.ucd_calib_cfg
.once
.send_res
= IWL_CALIB_INIT_CFG_ALL
;
458 calib_cfg_cmd
.ucd_calib_cfg
.flags
= IWL_CALIB_INIT_CFG_ALL
;
460 return iwl_send_cmd(priv
, &cmd
);
463 static void iwl5000_rx_calib_result(struct iwl_priv
*priv
,
464 struct iwl_rx_mem_buffer
*rxb
)
466 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
467 struct iwl_calib_hdr
*hdr
= (struct iwl_calib_hdr
*)pkt
->u
.raw
;
468 int len
= le32_to_cpu(pkt
->len
) & FH_RSCSR_FRAME_SIZE_MSK
;
471 /* reduce the size of the length field itself */
474 /* Define the order in which the results will be sent to the runtime
475 * uCode. iwl_send_calib_results sends them in a row according to their
476 * index. We sort them here */
477 switch (hdr
->op_code
) {
478 case IWL_PHY_CALIBRATE_LO_CMD
:
479 index
= IWL_CALIB_LO
;
481 case IWL_PHY_CALIBRATE_TX_IQ_CMD
:
482 index
= IWL_CALIB_TX_IQ
;
484 case IWL_PHY_CALIBRATE_TX_IQ_PERD_CMD
:
485 index
= IWL_CALIB_TX_IQ_PERD
;
487 case IWL_PHY_CALIBRATE_BASE_BAND_CMD
:
488 index
= IWL_CALIB_BASE_BAND
;
491 IWL_ERROR("Unknown calibration notification %d\n",
495 iwl_calib_set(&priv
->calib_results
[index
], pkt
->u
.raw
, len
);
498 static void iwl5000_rx_calib_complete(struct iwl_priv
*priv
,
499 struct iwl_rx_mem_buffer
*rxb
)
501 IWL_DEBUG_INFO("Init. calibration is completed, restarting fw.\n");
502 queue_work(priv
->workqueue
, &priv
->restart
);
508 static int iwl5000_load_section(struct iwl_priv
*priv
,
509 struct fw_desc
*image
,
515 dma_addr_t phy_addr
= image
->p_addr
;
516 u32 byte_cnt
= image
->len
;
518 spin_lock_irqsave(&priv
->lock
, flags
);
519 ret
= iwl_grab_nic_access(priv
);
521 spin_unlock_irqrestore(&priv
->lock
, flags
);
525 iwl_write_direct32(priv
,
526 FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL
),
527 FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE
);
529 iwl_write_direct32(priv
,
530 FH_SRVC_CHNL_SRAM_ADDR_REG(FH_SRVC_CHNL
), dst_addr
);
532 iwl_write_direct32(priv
,
533 FH_TFDIB_CTRL0_REG(FH_SRVC_CHNL
),
534 phy_addr
& FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK
);
536 iwl_write_direct32(priv
,
537 FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL
),
538 (iwl_get_dma_hi_addr(phy_addr
)
539 << FH_MEM_TFDIB_REG1_ADDR_BITSHIFT
) | byte_cnt
);
541 iwl_write_direct32(priv
,
542 FH_TCSR_CHNL_TX_BUF_STS_REG(FH_SRVC_CHNL
),
543 1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM
|
544 1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX
|
545 FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID
);
547 iwl_write_direct32(priv
,
548 FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL
),
549 FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE
|
550 FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE
|
551 FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD
);
553 iwl_release_nic_access(priv
);
554 spin_unlock_irqrestore(&priv
->lock
, flags
);
558 static int iwl5000_load_given_ucode(struct iwl_priv
*priv
,
559 struct fw_desc
*inst_image
,
560 struct fw_desc
*data_image
)
564 ret
= iwl5000_load_section(priv
, inst_image
, RTC_INST_LOWER_BOUND
);
568 IWL_DEBUG_INFO("INST uCode section being loaded...\n");
569 ret
= wait_event_interruptible_timeout(priv
->wait_command_queue
,
570 priv
->ucode_write_complete
, 5 * HZ
);
571 if (ret
== -ERESTARTSYS
) {
572 IWL_ERROR("Could not load the INST uCode section due "
577 IWL_ERROR("Could not load the INST uCode section\n");
581 priv
->ucode_write_complete
= 0;
583 ret
= iwl5000_load_section(
584 priv
, data_image
, RTC_DATA_LOWER_BOUND
);
588 IWL_DEBUG_INFO("DATA uCode section being loaded...\n");
590 ret
= wait_event_interruptible_timeout(priv
->wait_command_queue
,
591 priv
->ucode_write_complete
, 5 * HZ
);
592 if (ret
== -ERESTARTSYS
) {
593 IWL_ERROR("Could not load the INST uCode section due "
597 IWL_ERROR("Could not load the DATA uCode section\n");
602 priv
->ucode_write_complete
= 0;
607 static int iwl5000_load_ucode(struct iwl_priv
*priv
)
611 /* check whether init ucode should be loaded, or rather runtime ucode */
612 if (priv
->ucode_init
.len
&& (priv
->ucode_type
== UCODE_NONE
)) {
613 IWL_DEBUG_INFO("Init ucode found. Loading init ucode...\n");
614 ret
= iwl5000_load_given_ucode(priv
,
615 &priv
->ucode_init
, &priv
->ucode_init_data
);
617 IWL_DEBUG_INFO("Init ucode load complete.\n");
618 priv
->ucode_type
= UCODE_INIT
;
621 IWL_DEBUG_INFO("Init ucode not found, or already loaded. "
622 "Loading runtime ucode...\n");
623 ret
= iwl5000_load_given_ucode(priv
,
624 &priv
->ucode_code
, &priv
->ucode_data
);
626 IWL_DEBUG_INFO("Runtime ucode load complete.\n");
627 priv
->ucode_type
= UCODE_RT
;
634 static void iwl5000_init_alive_start(struct iwl_priv
*priv
)
638 /* Check alive response for "valid" sign from uCode */
639 if (priv
->card_alive_init
.is_valid
!= UCODE_VALID_OK
) {
640 /* We had an error bringing up the hardware, so take it
641 * all the way back down so we can try again */
642 IWL_DEBUG_INFO("Initialize Alive failed.\n");
646 /* initialize uCode was loaded... verify inst image.
647 * This is a paranoid check, because we would not have gotten the
648 * "initialize" alive if code weren't properly loaded. */
649 if (iwl_verify_ucode(priv
)) {
650 /* Runtime instruction load was bad;
651 * take it all the way back down so we can try again */
652 IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n");
656 iwl_clear_stations_table(priv
);
657 ret
= priv
->cfg
->ops
->lib
->alive_notify(priv
);
659 IWL_WARNING("Could not complete ALIVE transition: %d\n", ret
);
663 iwl5000_send_calib_cfg(priv
);
667 /* real restart (first load init_ucode) */
668 queue_work(priv
->workqueue
, &priv
->restart
);
671 static void iwl5000_set_wr_ptrs(struct iwl_priv
*priv
,
672 int txq_id
, u32 index
)
674 iwl_write_direct32(priv
, HBUS_TARG_WRPTR
,
675 (index
& 0xff) | (txq_id
<< 8));
676 iwl_write_prph(priv
, IWL50_SCD_QUEUE_RDPTR(txq_id
), index
);
679 static void iwl5000_tx_queue_set_status(struct iwl_priv
*priv
,
680 struct iwl_tx_queue
*txq
,
681 int tx_fifo_id
, int scd_retry
)
683 int txq_id
= txq
->q
.id
;
684 int active
= test_bit(txq_id
, &priv
->txq_ctx_active_msk
) ? 1 : 0;
686 iwl_write_prph(priv
, IWL50_SCD_QUEUE_STATUS_BITS(txq_id
),
687 (active
<< IWL50_SCD_QUEUE_STTS_REG_POS_ACTIVE
) |
688 (tx_fifo_id
<< IWL50_SCD_QUEUE_STTS_REG_POS_TXF
) |
689 (1 << IWL50_SCD_QUEUE_STTS_REG_POS_WSL
) |
690 IWL50_SCD_QUEUE_STTS_REG_MSK
);
692 txq
->sched_retry
= scd_retry
;
694 IWL_DEBUG_INFO("%s %s Queue %d on AC %d\n",
695 active
? "Activate" : "Deactivate",
696 scd_retry
? "BA" : "AC", txq_id
, tx_fifo_id
);
699 static int iwl5000_send_wimax_coex(struct iwl_priv
*priv
)
701 struct iwl_wimax_coex_cmd coex_cmd
;
703 memset(&coex_cmd
, 0, sizeof(coex_cmd
));
705 return iwl_send_cmd_pdu(priv
, COEX_PRIORITY_TABLE_CMD
,
706 sizeof(coex_cmd
), &coex_cmd
);
709 static int iwl5000_alive_notify(struct iwl_priv
*priv
)
717 spin_lock_irqsave(&priv
->lock
, flags
);
719 ret
= iwl_grab_nic_access(priv
);
721 spin_unlock_irqrestore(&priv
->lock
, flags
);
725 priv
->scd_base_addr
= iwl_read_prph(priv
, IWL50_SCD_SRAM_BASE_ADDR
);
726 a
= priv
->scd_base_addr
+ IWL50_SCD_CONTEXT_DATA_OFFSET
;
727 for (; a
< priv
->scd_base_addr
+ IWL50_SCD_TX_STTS_BITMAP_OFFSET
;
729 iwl_write_targ_mem(priv
, a
, 0);
730 for (; a
< priv
->scd_base_addr
+ IWL50_SCD_TRANSLATE_TBL_OFFSET
;
732 iwl_write_targ_mem(priv
, a
, 0);
733 for (; a
< sizeof(u16
) * priv
->hw_params
.max_txq_num
; a
+= 4)
734 iwl_write_targ_mem(priv
, a
, 0);
736 iwl_write_prph(priv
, IWL50_SCD_DRAM_BASE_ADDR
,
737 priv
->scd_bc_tbls
.dma
>> 10);
739 /* Enable DMA channel */
740 for (chan
= 0; chan
< FH50_TCSR_CHNL_NUM
; chan
++)
741 iwl_write_direct32(priv
, FH_TCSR_CHNL_TX_CONFIG_REG(chan
),
742 FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE
|
743 FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE
);
745 /* Update FH chicken bits */
746 reg_val
= iwl_read_direct32(priv
, FH_TX_CHICKEN_BITS_REG
);
747 iwl_write_direct32(priv
, FH_TX_CHICKEN_BITS_REG
,
748 reg_val
| FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN
);
750 iwl_write_prph(priv
, IWL50_SCD_QUEUECHAIN_SEL
,
751 IWL50_SCD_QUEUECHAIN_SEL_ALL(priv
->hw_params
.max_txq_num
));
752 iwl_write_prph(priv
, IWL50_SCD_AGGR_SEL
, 0);
754 /* initiate the queues */
755 for (i
= 0; i
< priv
->hw_params
.max_txq_num
; i
++) {
756 iwl_write_prph(priv
, IWL50_SCD_QUEUE_RDPTR(i
), 0);
757 iwl_write_direct32(priv
, HBUS_TARG_WRPTR
, 0 | (i
<< 8));
758 iwl_write_targ_mem(priv
, priv
->scd_base_addr
+
759 IWL50_SCD_CONTEXT_QUEUE_OFFSET(i
), 0);
760 iwl_write_targ_mem(priv
, priv
->scd_base_addr
+
761 IWL50_SCD_CONTEXT_QUEUE_OFFSET(i
) +
764 IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS
) &
765 IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK
) |
767 IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS
) &
768 IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK
));
771 iwl_write_prph(priv
, IWL50_SCD_INTERRUPT_MASK
,
772 IWL_MASK(0, priv
->hw_params
.max_txq_num
));
774 /* Activate all Tx DMA/FIFO channels */
775 priv
->cfg
->ops
->lib
->txq_set_sched(priv
, IWL_MASK(0, 7));
777 iwl5000_set_wr_ptrs(priv
, IWL_CMD_QUEUE_NUM
, 0);
779 /* map qos queues to fifos one-to-one */
780 for (i
= 0; i
< ARRAY_SIZE(iwl5000_default_queue_to_tx_fifo
); i
++) {
781 int ac
= iwl5000_default_queue_to_tx_fifo
[i
];
782 iwl_txq_ctx_activate(priv
, i
);
783 iwl5000_tx_queue_set_status(priv
, &priv
->txq
[i
], ac
, 0);
785 /* TODO - need to initialize those FIFOs inside the loop above,
786 * not only mark them as active */
787 iwl_txq_ctx_activate(priv
, 4);
788 iwl_txq_ctx_activate(priv
, 7);
789 iwl_txq_ctx_activate(priv
, 8);
790 iwl_txq_ctx_activate(priv
, 9);
792 iwl_release_nic_access(priv
);
793 spin_unlock_irqrestore(&priv
->lock
, flags
);
796 iwl5000_send_wimax_coex(priv
);
798 iwl5000_set_Xtal_calib(priv
);
799 iwl_send_calib_results(priv
);
804 static int iwl5000_hw_set_hw_params(struct iwl_priv
*priv
)
806 if ((priv
->cfg
->mod_params
->num_of_queues
> IWL50_NUM_QUEUES
) ||
807 (priv
->cfg
->mod_params
->num_of_queues
< IWL_MIN_NUM_QUEUES
)) {
808 IWL_ERROR("invalid queues_num, should be between %d and %d\n",
809 IWL_MIN_NUM_QUEUES
, IWL50_NUM_QUEUES
);
813 priv
->hw_params
.max_txq_num
= priv
->cfg
->mod_params
->num_of_queues
;
814 priv
->hw_params
.scd_bc_tbls_size
=
815 IWL50_NUM_QUEUES
* sizeof(struct iwl5000_scd_bc_tbl
);
816 priv
->hw_params
.max_stations
= IWL5000_STATION_COUNT
;
817 priv
->hw_params
.bcast_sta_id
= IWL5000_BROADCAST_ID
;
818 priv
->hw_params
.max_data_size
= IWL50_RTC_DATA_SIZE
;
819 priv
->hw_params
.max_inst_size
= IWL50_RTC_INST_SIZE
;
820 priv
->hw_params
.max_bsm_size
= 0;
821 priv
->hw_params
.fat_channel
= BIT(IEEE80211_BAND_2GHZ
) |
822 BIT(IEEE80211_BAND_5GHZ
);
823 priv
->hw_params
.sens
= &iwl5000_sensitivity
;
825 switch (priv
->hw_rev
& CSR_HW_REV_TYPE_MSK
) {
826 case CSR_HW_REV_TYPE_5100
:
827 priv
->hw_params
.tx_chains_num
= 1;
828 priv
->hw_params
.rx_chains_num
= 2;
829 priv
->hw_params
.valid_tx_ant
= ANT_B
;
830 priv
->hw_params
.valid_rx_ant
= ANT_AB
;
832 case CSR_HW_REV_TYPE_5150
:
833 priv
->hw_params
.tx_chains_num
= 1;
834 priv
->hw_params
.rx_chains_num
= 2;
835 priv
->hw_params
.valid_tx_ant
= ANT_A
;
836 priv
->hw_params
.valid_rx_ant
= ANT_AB
;
838 case CSR_HW_REV_TYPE_5300
:
839 case CSR_HW_REV_TYPE_5350
:
840 priv
->hw_params
.tx_chains_num
= 3;
841 priv
->hw_params
.rx_chains_num
= 3;
842 priv
->hw_params
.valid_tx_ant
= ANT_ABC
;
843 priv
->hw_params
.valid_rx_ant
= ANT_ABC
;
847 switch (priv
->hw_rev
& CSR_HW_REV_TYPE_MSK
) {
848 case CSR_HW_REV_TYPE_5100
:
849 case CSR_HW_REV_TYPE_5300
:
850 case CSR_HW_REV_TYPE_5350
:
851 /* 5X00 and 5350 wants in Celsius */
852 priv
->hw_params
.ct_kill_threshold
= CT_KILL_THRESHOLD
;
854 case CSR_HW_REV_TYPE_5150
:
855 /* 5150 wants in Kelvin */
856 priv
->hw_params
.ct_kill_threshold
=
857 CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD
);
861 /* Set initial calibration set */
862 switch (priv
->hw_rev
& CSR_HW_REV_TYPE_MSK
) {
863 case CSR_HW_REV_TYPE_5100
:
864 case CSR_HW_REV_TYPE_5300
:
865 case CSR_HW_REV_TYPE_5350
:
866 priv
->hw_params
.calib_init_cfg
=
867 BIT(IWL_CALIB_XTAL
) |
869 BIT(IWL_CALIB_TX_IQ
) |
870 BIT(IWL_CALIB_TX_IQ_PERD
) |
871 BIT(IWL_CALIB_BASE_BAND
);
873 case CSR_HW_REV_TYPE_5150
:
874 priv
->hw_params
.calib_init_cfg
= 0;
883 * iwl5000_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
885 static void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv
*priv
,
886 struct iwl_tx_queue
*txq
,
889 struct iwl5000_scd_bc_tbl
*scd_bc_tbl
= priv
->scd_bc_tbls
.addr
;
890 int write_ptr
= txq
->q
.write_ptr
;
891 int txq_id
= txq
->q
.id
;
894 u16 len
= byte_cnt
+ IWL_TX_CRC_SIZE
+ IWL_TX_DELIMITER_SIZE
;
897 WARN_ON(len
> 0xFFF || write_ptr
>= TFD_QUEUE_SIZE_MAX
);
899 if (txq_id
!= IWL_CMD_QUEUE_NUM
) {
900 sta_id
= txq
->cmd
[txq
->q
.write_ptr
]->cmd
.tx
.sta_id
;
901 sec_ctl
= txq
->cmd
[txq
->q
.write_ptr
]->cmd
.tx
.sec_ctl
;
903 switch (sec_ctl
& TX_CMD_SEC_MSK
) {
907 case TX_CMD_SEC_TKIP
:
911 len
+= WEP_IV_LEN
+ WEP_ICV_LEN
;
916 bc_ent
= cpu_to_le16((len
& 0xFFF) | (sta_id
<< 12));
918 scd_bc_tbl
[txq_id
].tfd_offset
[write_ptr
] = bc_ent
;
920 if (txq
->q
.write_ptr
< TFD_QUEUE_SIZE_BC_DUP
)
922 tfd_offset
[TFD_QUEUE_SIZE_MAX
+ write_ptr
] = bc_ent
;
925 static void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv
*priv
,
926 struct iwl_tx_queue
*txq
)
928 struct iwl5000_scd_bc_tbl
*scd_bc_tbl
= priv
->scd_bc_tbls
.addr
;
929 int txq_id
= txq
->q
.id
;
930 int read_ptr
= txq
->q
.read_ptr
;
934 WARN_ON(read_ptr
>= TFD_QUEUE_SIZE_MAX
);
936 if (txq_id
!= IWL_CMD_QUEUE_NUM
)
937 sta_id
= txq
->cmd
[read_ptr
]->cmd
.tx
.sta_id
;
939 bc_ent
= cpu_to_le16(1 | (sta_id
<< 12));
940 scd_bc_tbl
[txq_id
].tfd_offset
[read_ptr
] = bc_ent
;
942 if (txq
->q
.write_ptr
< TFD_QUEUE_SIZE_BC_DUP
)
944 tfd_offset
[TFD_QUEUE_SIZE_MAX
+ read_ptr
] = bc_ent
;
947 static int iwl5000_tx_queue_set_q2ratid(struct iwl_priv
*priv
, u16 ra_tid
,
954 scd_q2ratid
= ra_tid
& IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK
;
956 tbl_dw_addr
= priv
->scd_base_addr
+
957 IWL50_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id
);
959 tbl_dw
= iwl_read_targ_mem(priv
, tbl_dw_addr
);
962 tbl_dw
= (scd_q2ratid
<< 16) | (tbl_dw
& 0x0000FFFF);
964 tbl_dw
= scd_q2ratid
| (tbl_dw
& 0xFFFF0000);
966 iwl_write_targ_mem(priv
, tbl_dw_addr
, tbl_dw
);
970 static void iwl5000_tx_queue_stop_scheduler(struct iwl_priv
*priv
, u16 txq_id
)
972 /* Simply stop the queue, but don't change any configuration;
973 * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
975 IWL50_SCD_QUEUE_STATUS_BITS(txq_id
),
976 (0 << IWL50_SCD_QUEUE_STTS_REG_POS_ACTIVE
)|
977 (1 << IWL50_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN
));
980 static int iwl5000_txq_agg_enable(struct iwl_priv
*priv
, int txq_id
,
981 int tx_fifo
, int sta_id
, int tid
, u16 ssn_idx
)
987 if ((IWL50_FIRST_AMPDU_QUEUE
> txq_id
) ||
988 (IWL50_FIRST_AMPDU_QUEUE
+ IWL50_NUM_AMPDU_QUEUES
<= txq_id
)) {
989 IWL_WARNING("queue number out of range: %d, must be %d to %d\n",
990 txq_id
, IWL50_FIRST_AMPDU_QUEUE
,
991 IWL50_FIRST_AMPDU_QUEUE
+ IWL50_NUM_AMPDU_QUEUES
- 1);
995 ra_tid
= BUILD_RAxTID(sta_id
, tid
);
997 /* Modify device's station table to Tx this TID */
998 iwl_sta_tx_modify_enable_tid(priv
, sta_id
, tid
);
1000 spin_lock_irqsave(&priv
->lock
, flags
);
1001 ret
= iwl_grab_nic_access(priv
);
1003 spin_unlock_irqrestore(&priv
->lock
, flags
);
1007 /* Stop this Tx queue before configuring it */
1008 iwl5000_tx_queue_stop_scheduler(priv
, txq_id
);
1010 /* Map receiver-address / traffic-ID to this queue */
1011 iwl5000_tx_queue_set_q2ratid(priv
, ra_tid
, txq_id
);
1013 /* Set this queue as a chain-building queue */
1014 iwl_set_bits_prph(priv
, IWL50_SCD_QUEUECHAIN_SEL
, (1<<txq_id
));
1016 /* enable aggregations for the queue */
1017 iwl_set_bits_prph(priv
, IWL50_SCD_AGGR_SEL
, (1<<txq_id
));
1019 /* Place first TFD at index corresponding to start sequence number.
1020 * Assumes that ssn_idx is valid (!= 0xFFF) */
1021 priv
->txq
[txq_id
].q
.read_ptr
= (ssn_idx
& 0xff);
1022 priv
->txq
[txq_id
].q
.write_ptr
= (ssn_idx
& 0xff);
1023 iwl5000_set_wr_ptrs(priv
, txq_id
, ssn_idx
);
1025 /* Set up Tx window size and frame limit for this queue */
1026 iwl_write_targ_mem(priv
, priv
->scd_base_addr
+
1027 IWL50_SCD_CONTEXT_QUEUE_OFFSET(txq_id
) +
1030 IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS
) &
1031 IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK
) |
1032 ((SCD_FRAME_LIMIT
<<
1033 IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS
) &
1034 IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK
));
1036 iwl_set_bits_prph(priv
, IWL50_SCD_INTERRUPT_MASK
, (1 << txq_id
));
1038 /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
1039 iwl5000_tx_queue_set_status(priv
, &priv
->txq
[txq_id
], tx_fifo
, 1);
1041 iwl_release_nic_access(priv
);
1042 spin_unlock_irqrestore(&priv
->lock
, flags
);
1047 static int iwl5000_txq_agg_disable(struct iwl_priv
*priv
, u16 txq_id
,
1048 u16 ssn_idx
, u8 tx_fifo
)
1052 if ((IWL50_FIRST_AMPDU_QUEUE
> txq_id
) ||
1053 (IWL50_FIRST_AMPDU_QUEUE
+ IWL50_NUM_AMPDU_QUEUES
<= txq_id
)) {
1054 IWL_WARNING("queue number out of range: %d, must be %d to %d\n",
1055 txq_id
, IWL50_FIRST_AMPDU_QUEUE
,
1056 IWL50_FIRST_AMPDU_QUEUE
+ IWL50_NUM_AMPDU_QUEUES
- 1);
1060 ret
= iwl_grab_nic_access(priv
);
1064 iwl5000_tx_queue_stop_scheduler(priv
, txq_id
);
1066 iwl_clear_bits_prph(priv
, IWL50_SCD_AGGR_SEL
, (1 << txq_id
));
1068 priv
->txq
[txq_id
].q
.read_ptr
= (ssn_idx
& 0xff);
1069 priv
->txq
[txq_id
].q
.write_ptr
= (ssn_idx
& 0xff);
1070 /* supposes that ssn_idx is valid (!= 0xFFF) */
1071 iwl5000_set_wr_ptrs(priv
, txq_id
, ssn_idx
);
1073 iwl_clear_bits_prph(priv
, IWL50_SCD_INTERRUPT_MASK
, (1 << txq_id
));
1074 iwl_txq_ctx_deactivate(priv
, txq_id
);
1075 iwl5000_tx_queue_set_status(priv
, &priv
->txq
[txq_id
], tx_fifo
, 0);
1077 iwl_release_nic_access(priv
);
1082 static u16
iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd
*cmd
, u8
*data
)
1084 u16 size
= (u16
)sizeof(struct iwl_addsta_cmd
);
1085 memcpy(data
, cmd
, size
);
1091 * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
1092 * must be called under priv->lock and mac access
1094 static void iwl5000_txq_set_sched(struct iwl_priv
*priv
, u32 mask
)
1096 iwl_write_prph(priv
, IWL50_SCD_TXFACT
, mask
);
1100 static inline u32
iwl5000_get_scd_ssn(struct iwl5000_tx_resp
*tx_resp
)
1102 return le32_to_cpup((__le32
*)&tx_resp
->status
+
1103 tx_resp
->frame_count
) & MAX_SN
;
1106 static int iwl5000_tx_status_reply_tx(struct iwl_priv
*priv
,
1107 struct iwl_ht_agg
*agg
,
1108 struct iwl5000_tx_resp
*tx_resp
,
1109 int txq_id
, u16 start_idx
)
1112 struct agg_tx_status
*frame_status
= &tx_resp
->status
;
1113 struct ieee80211_tx_info
*info
= NULL
;
1114 struct ieee80211_hdr
*hdr
= NULL
;
1115 u32 rate_n_flags
= le32_to_cpu(tx_resp
->rate_n_flags
);
1119 if (agg
->wait_for_ba
)
1120 IWL_DEBUG_TX_REPLY("got tx response w/o block-ack\n");
1122 agg
->frame_count
= tx_resp
->frame_count
;
1123 agg
->start_idx
= start_idx
;
1124 agg
->rate_n_flags
= rate_n_flags
;
1127 /* # frames attempted by Tx command */
1128 if (agg
->frame_count
== 1) {
1129 /* Only one frame was attempted; no block-ack will arrive */
1130 status
= le16_to_cpu(frame_status
[0].status
);
1133 /* FIXME: code repetition */
1134 IWL_DEBUG_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n",
1135 agg
->frame_count
, agg
->start_idx
, idx
);
1137 info
= IEEE80211_SKB_CB(priv
->txq
[txq_id
].txb
[idx
].skb
[0]);
1138 info
->status
.rates
[0].count
= tx_resp
->failure_frame
+ 1;
1139 info
->flags
&= ~IEEE80211_TX_CTL_AMPDU
;
1140 info
->flags
|= iwl_is_tx_success(status
) ?
1141 IEEE80211_TX_STAT_ACK
: 0;
1142 iwl_hwrate_to_tx_control(priv
, rate_n_flags
, info
);
1144 /* FIXME: code repetition end */
1146 IWL_DEBUG_TX_REPLY("1 Frame 0x%x failure :%d\n",
1147 status
& 0xff, tx_resp
->failure_frame
);
1148 IWL_DEBUG_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags
);
1150 agg
->wait_for_ba
= 0;
1152 /* Two or more frames were attempted; expect block-ack */
1154 int start
= agg
->start_idx
;
1156 /* Construct bit-map of pending frames within Tx window */
1157 for (i
= 0; i
< agg
->frame_count
; i
++) {
1159 status
= le16_to_cpu(frame_status
[i
].status
);
1160 seq
= le16_to_cpu(frame_status
[i
].sequence
);
1161 idx
= SEQ_TO_INDEX(seq
);
1162 txq_id
= SEQ_TO_QUEUE(seq
);
1164 if (status
& (AGG_TX_STATE_FEW_BYTES_MSK
|
1165 AGG_TX_STATE_ABORT_MSK
))
1168 IWL_DEBUG_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n",
1169 agg
->frame_count
, txq_id
, idx
);
1171 hdr
= iwl_tx_queue_get_hdr(priv
, txq_id
, idx
);
1173 sc
= le16_to_cpu(hdr
->seq_ctrl
);
1174 if (idx
!= (SEQ_TO_SN(sc
) & 0xff)) {
1175 IWL_ERROR("BUG_ON idx doesn't match seq control"
1176 " idx=%d, seq_idx=%d, seq=%d\n",
1182 IWL_DEBUG_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n",
1183 i
, idx
, SEQ_TO_SN(sc
));
1187 sh
= (start
- idx
) + 0xff;
1188 bitmap
= bitmap
<< sh
;
1191 } else if (sh
< -64)
1192 sh
= 0xff - (start
- idx
);
1196 bitmap
= bitmap
<< sh
;
1199 bitmap
|= 1ULL << sh
;
1200 IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%llx\n",
1201 start
, (unsigned long long)bitmap
);
1204 agg
->bitmap
= bitmap
;
1205 agg
->start_idx
= start
;
1206 IWL_DEBUG_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n",
1207 agg
->frame_count
, agg
->start_idx
,
1208 (unsigned long long)agg
->bitmap
);
1211 agg
->wait_for_ba
= 1;
1216 static void iwl5000_rx_reply_tx(struct iwl_priv
*priv
,
1217 struct iwl_rx_mem_buffer
*rxb
)
1219 struct iwl_rx_packet
*pkt
= (struct iwl_rx_packet
*)rxb
->skb
->data
;
1220 u16 sequence
= le16_to_cpu(pkt
->hdr
.sequence
);
1221 int txq_id
= SEQ_TO_QUEUE(sequence
);
1222 int index
= SEQ_TO_INDEX(sequence
);
1223 struct iwl_tx_queue
*txq
= &priv
->txq
[txq_id
];
1224 struct ieee80211_tx_info
*info
;
1225 struct iwl5000_tx_resp
*tx_resp
= (void *)&pkt
->u
.raw
[0];
1226 u32 status
= le16_to_cpu(tx_resp
->status
.status
);
1231 if ((index
>= txq
->q
.n_bd
) || (iwl_queue_used(&txq
->q
, index
) == 0)) {
1232 IWL_ERROR("Read index for DMA queue txq_id (%d) index %d "
1233 "is out of range [0-%d] %d %d\n", txq_id
,
1234 index
, txq
->q
.n_bd
, txq
->q
.write_ptr
,
1239 info
= IEEE80211_SKB_CB(txq
->txb
[txq
->q
.read_ptr
].skb
[0]);
1240 memset(&info
->status
, 0, sizeof(info
->status
));
1242 tid
= (tx_resp
->ra_tid
& IWL50_TX_RES_TID_MSK
) >> IWL50_TX_RES_TID_POS
;
1243 sta_id
= (tx_resp
->ra_tid
& IWL50_TX_RES_RA_MSK
) >> IWL50_TX_RES_RA_POS
;
1245 if (txq
->sched_retry
) {
1246 const u32 scd_ssn
= iwl5000_get_scd_ssn(tx_resp
);
1247 struct iwl_ht_agg
*agg
= NULL
;
1249 agg
= &priv
->stations
[sta_id
].tid
[tid
].agg
;
1251 iwl5000_tx_status_reply_tx(priv
, agg
, tx_resp
, txq_id
, index
);
1253 /* check if BAR is needed */
1254 if ((tx_resp
->frame_count
== 1) && !iwl_is_tx_success(status
))
1255 info
->flags
|= IEEE80211_TX_STAT_AMPDU_NO_BACK
;
1257 if (txq
->q
.read_ptr
!= (scd_ssn
& 0xff)) {
1258 index
= iwl_queue_dec_wrap(scd_ssn
& 0xff, txq
->q
.n_bd
);
1259 IWL_DEBUG_TX_REPLY("Retry scheduler reclaim "
1260 "scd_ssn=%d idx=%d txq=%d swq=%d\n",
1261 scd_ssn
, index
, txq_id
, txq
->swq_id
);
1263 freed
= iwl_tx_queue_reclaim(priv
, txq_id
, index
);
1264 priv
->stations
[sta_id
].tid
[tid
].tfds_in_queue
-= freed
;
1266 if (priv
->mac80211_registered
&&
1267 (iwl_queue_space(&txq
->q
) > txq
->q
.low_mark
) &&
1268 (agg
->state
!= IWL_EMPTYING_HW_QUEUE_DELBA
)) {
1269 if (agg
->state
== IWL_AGG_OFF
)
1270 ieee80211_wake_queue(priv
->hw
, txq_id
);
1272 ieee80211_wake_queue(priv
->hw
,
1277 BUG_ON(txq_id
!= txq
->swq_id
);
1279 info
->status
.rates
[0].count
= tx_resp
->failure_frame
+ 1;
1280 info
->flags
|= iwl_is_tx_success(status
) ?
1281 IEEE80211_TX_STAT_ACK
: 0;
1282 iwl_hwrate_to_tx_control(priv
,
1283 le32_to_cpu(tx_resp
->rate_n_flags
),
1286 IWL_DEBUG_TX_REPLY("TXQ %d status %s (0x%08x) rate_n_flags "
1287 "0x%x retries %d\n",
1289 iwl_get_tx_fail_reason(status
), status
,
1290 le32_to_cpu(tx_resp
->rate_n_flags
),
1291 tx_resp
->failure_frame
);
1293 freed
= iwl_tx_queue_reclaim(priv
, txq_id
, index
);
1294 if (ieee80211_is_data_qos(tx_resp
->frame_ctrl
))
1295 priv
->stations
[sta_id
].tid
[tid
].tfds_in_queue
-= freed
;
1297 if (priv
->mac80211_registered
&&
1298 (iwl_queue_space(&txq
->q
) > txq
->q
.low_mark
))
1299 ieee80211_wake_queue(priv
->hw
, txq_id
);
1302 if (ieee80211_is_data_qos(tx_resp
->frame_ctrl
))
1303 iwl_txq_check_empty(priv
, sta_id
, tid
, txq_id
);
1305 if (iwl_check_bits(status
, TX_ABORT_REQUIRED_MSK
))
1306 IWL_ERROR("TODO: Implement Tx ABORT REQUIRED!!!\n");
1309 /* Currently 5000 is the superset of everything */
1310 static u16
iwl5000_get_hcmd_size(u8 cmd_id
, u16 len
)
1315 static void iwl5000_setup_deferred_work(struct iwl_priv
*priv
)
1317 /* in 5000 the tx power calibration is done in uCode */
1318 priv
->disable_tx_power_cal
= 1;
1321 static void iwl5000_rx_handler_setup(struct iwl_priv
*priv
)
1323 /* init calibration handlers */
1324 priv
->rx_handlers
[CALIBRATION_RES_NOTIFICATION
] =
1325 iwl5000_rx_calib_result
;
1326 priv
->rx_handlers
[CALIBRATION_COMPLETE_NOTIFICATION
] =
1327 iwl5000_rx_calib_complete
;
1328 priv
->rx_handlers
[REPLY_TX
] = iwl5000_rx_reply_tx
;
1332 static int iwl5000_hw_valid_rtc_data_addr(u32 addr
)
1334 return (addr
>= RTC_DATA_LOWER_BOUND
) &&
1335 (addr
< IWL50_RTC_DATA_UPPER_BOUND
);
1338 static int iwl5000_send_rxon_assoc(struct iwl_priv
*priv
)
1341 struct iwl5000_rxon_assoc_cmd rxon_assoc
;
1342 const struct iwl_rxon_cmd
*rxon1
= &priv
->staging_rxon
;
1343 const struct iwl_rxon_cmd
*rxon2
= &priv
->active_rxon
;
1345 if ((rxon1
->flags
== rxon2
->flags
) &&
1346 (rxon1
->filter_flags
== rxon2
->filter_flags
) &&
1347 (rxon1
->cck_basic_rates
== rxon2
->cck_basic_rates
) &&
1348 (rxon1
->ofdm_ht_single_stream_basic_rates
==
1349 rxon2
->ofdm_ht_single_stream_basic_rates
) &&
1350 (rxon1
->ofdm_ht_dual_stream_basic_rates
==
1351 rxon2
->ofdm_ht_dual_stream_basic_rates
) &&
1352 (rxon1
->ofdm_ht_triple_stream_basic_rates
==
1353 rxon2
->ofdm_ht_triple_stream_basic_rates
) &&
1354 (rxon1
->acquisition_data
== rxon2
->acquisition_data
) &&
1355 (rxon1
->rx_chain
== rxon2
->rx_chain
) &&
1356 (rxon1
->ofdm_basic_rates
== rxon2
->ofdm_basic_rates
)) {
1357 IWL_DEBUG_INFO("Using current RXON_ASSOC. Not resending.\n");
1361 rxon_assoc
.flags
= priv
->staging_rxon
.flags
;
1362 rxon_assoc
.filter_flags
= priv
->staging_rxon
.filter_flags
;
1363 rxon_assoc
.ofdm_basic_rates
= priv
->staging_rxon
.ofdm_basic_rates
;
1364 rxon_assoc
.cck_basic_rates
= priv
->staging_rxon
.cck_basic_rates
;
1365 rxon_assoc
.reserved1
= 0;
1366 rxon_assoc
.reserved2
= 0;
1367 rxon_assoc
.reserved3
= 0;
1368 rxon_assoc
.ofdm_ht_single_stream_basic_rates
=
1369 priv
->staging_rxon
.ofdm_ht_single_stream_basic_rates
;
1370 rxon_assoc
.ofdm_ht_dual_stream_basic_rates
=
1371 priv
->staging_rxon
.ofdm_ht_dual_stream_basic_rates
;
1372 rxon_assoc
.rx_chain_select_flags
= priv
->staging_rxon
.rx_chain
;
1373 rxon_assoc
.ofdm_ht_triple_stream_basic_rates
=
1374 priv
->staging_rxon
.ofdm_ht_triple_stream_basic_rates
;
1375 rxon_assoc
.acquisition_data
= priv
->staging_rxon
.acquisition_data
;
1377 ret
= iwl_send_cmd_pdu_async(priv
, REPLY_RXON_ASSOC
,
1378 sizeof(rxon_assoc
), &rxon_assoc
, NULL
);
1384 static int iwl5000_send_tx_power(struct iwl_priv
*priv
)
1386 struct iwl5000_tx_power_dbm_cmd tx_power_cmd
;
1388 /* half dBm need to multiply */
1389 tx_power_cmd
.global_lmt
= (s8
)(2 * priv
->tx_power_user_lmt
);
1390 tx_power_cmd
.flags
= IWL50_TX_POWER_NO_CLOSED
;
1391 tx_power_cmd
.srv_chan_lmt
= IWL50_TX_POWER_AUTO
;
1392 return iwl_send_cmd_pdu_async(priv
, REPLY_TX_POWER_DBM_CMD
,
1393 sizeof(tx_power_cmd
), &tx_power_cmd
,
1397 static void iwl5000_temperature(struct iwl_priv
*priv
)
1399 /* store temperature from statistics (in Celsius) */
1400 priv
->temperature
= le32_to_cpu(priv
->statistics
.general
.temperature
);
1403 /* Calc max signal level (dBm) among 3 possible receivers */
1404 static int iwl5000_calc_rssi(struct iwl_priv
*priv
,
1405 struct iwl_rx_phy_res
*rx_resp
)
1407 /* data from PHY/DSP regarding signal strength, etc.,
1408 * contents are always there, not configurable by host
1410 struct iwl5000_non_cfg_phy
*ncphy
=
1411 (struct iwl5000_non_cfg_phy
*)rx_resp
->non_cfg_phy_buf
;
1412 u32 val
, rssi_a
, rssi_b
, rssi_c
, max_rssi
;
1415 val
= le32_to_cpu(ncphy
->non_cfg_phy
[IWL50_RX_RES_AGC_IDX
]);
1416 agc
= (val
& IWL50_OFDM_AGC_MSK
) >> IWL50_OFDM_AGC_BIT_POS
;
1418 /* Find max rssi among 3 possible receivers.
1419 * These values are measured by the digital signal processor (DSP).
1420 * They should stay fairly constant even as the signal strength varies,
1421 * if the radio's automatic gain control (AGC) is working right.
1422 * AGC value (see below) will provide the "interesting" info.
1424 val
= le32_to_cpu(ncphy
->non_cfg_phy
[IWL50_RX_RES_RSSI_AB_IDX
]);
1425 rssi_a
= (val
& IWL50_OFDM_RSSI_A_MSK
) >> IWL50_OFDM_RSSI_A_BIT_POS
;
1426 rssi_b
= (val
& IWL50_OFDM_RSSI_B_MSK
) >> IWL50_OFDM_RSSI_B_BIT_POS
;
1427 val
= le32_to_cpu(ncphy
->non_cfg_phy
[IWL50_RX_RES_RSSI_C_IDX
]);
1428 rssi_c
= (val
& IWL50_OFDM_RSSI_C_MSK
) >> IWL50_OFDM_RSSI_C_BIT_POS
;
1430 max_rssi
= max_t(u32
, rssi_a
, rssi_b
);
1431 max_rssi
= max_t(u32
, max_rssi
, rssi_c
);
1433 IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
1434 rssi_a
, rssi_b
, rssi_c
, max_rssi
, agc
);
1436 /* dBm = max_rssi dB - agc dB - constant.
1437 * Higher AGC (higher radio gain) means lower signal. */
1438 return max_rssi
- agc
- IWL_RSSI_OFFSET
;
1441 static struct iwl_hcmd_ops iwl5000_hcmd
= {
1442 .rxon_assoc
= iwl5000_send_rxon_assoc
,
1445 static struct iwl_hcmd_utils_ops iwl5000_hcmd_utils
= {
1446 .get_hcmd_size
= iwl5000_get_hcmd_size
,
1447 .build_addsta_hcmd
= iwl5000_build_addsta_hcmd
,
1448 .gain_computation
= iwl5000_gain_computation
,
1449 .chain_noise_reset
= iwl5000_chain_noise_reset
,
1450 .rts_tx_cmd_flag
= iwl5000_rts_tx_cmd_flag
,
1451 .calc_rssi
= iwl5000_calc_rssi
,
1454 static struct iwl_lib_ops iwl5000_lib
= {
1455 .set_hw_params
= iwl5000_hw_set_hw_params
,
1456 .txq_update_byte_cnt_tbl
= iwl5000_txq_update_byte_cnt_tbl
,
1457 .txq_inval_byte_cnt_tbl
= iwl5000_txq_inval_byte_cnt_tbl
,
1458 .txq_set_sched
= iwl5000_txq_set_sched
,
1459 .txq_agg_enable
= iwl5000_txq_agg_enable
,
1460 .txq_agg_disable
= iwl5000_txq_agg_disable
,
1461 .rx_handler_setup
= iwl5000_rx_handler_setup
,
1462 .setup_deferred_work
= iwl5000_setup_deferred_work
,
1463 .is_valid_rtc_data_addr
= iwl5000_hw_valid_rtc_data_addr
,
1464 .load_ucode
= iwl5000_load_ucode
,
1465 .init_alive_start
= iwl5000_init_alive_start
,
1466 .alive_notify
= iwl5000_alive_notify
,
1467 .send_tx_power
= iwl5000_send_tx_power
,
1468 .temperature
= iwl5000_temperature
,
1469 .update_chain_flags
= iwl_update_chain_flags
,
1471 .init
= iwl5000_apm_init
,
1472 .reset
= iwl5000_apm_reset
,
1473 .stop
= iwl5000_apm_stop
,
1474 .config
= iwl5000_nic_config
,
1475 .set_pwr_src
= iwl_set_pwr_src
,
1478 .regulatory_bands
= {
1479 EEPROM_5000_REG_BAND_1_CHANNELS
,
1480 EEPROM_5000_REG_BAND_2_CHANNELS
,
1481 EEPROM_5000_REG_BAND_3_CHANNELS
,
1482 EEPROM_5000_REG_BAND_4_CHANNELS
,
1483 EEPROM_5000_REG_BAND_5_CHANNELS
,
1484 EEPROM_5000_REG_BAND_24_FAT_CHANNELS
,
1485 EEPROM_5000_REG_BAND_52_FAT_CHANNELS
1487 .verify_signature
= iwlcore_eeprom_verify_signature
,
1488 .acquire_semaphore
= iwlcore_eeprom_acquire_semaphore
,
1489 .release_semaphore
= iwlcore_eeprom_release_semaphore
,
1490 .calib_version
= iwl5000_eeprom_calib_version
,
1491 .query_addr
= iwl5000_eeprom_query_addr
,
1495 static struct iwl_ops iwl5000_ops
= {
1496 .lib
= &iwl5000_lib
,
1497 .hcmd
= &iwl5000_hcmd
,
1498 .utils
= &iwl5000_hcmd_utils
,
1501 static struct iwl_mod_params iwl50_mod_params
= {
1502 .num_of_queues
= IWL50_NUM_QUEUES
,
1503 .num_of_ampdu_queues
= IWL50_NUM_AMPDU_QUEUES
,
1507 /* the rest are 0 by default */
1511 struct iwl_cfg iwl5300_agn_cfg
= {
1513 .fw_name
= IWL5000_MODULE_FIRMWARE
,
1514 .sku
= IWL_SKU_A
|IWL_SKU_G
|IWL_SKU_N
,
1515 .ops
= &iwl5000_ops
,
1516 .eeprom_size
= IWL_5000_EEPROM_IMG_SIZE
,
1517 .eeprom_ver
= EEPROM_5000_EEPROM_VERSION
,
1518 .eeprom_calib_ver
= EEPROM_5000_TX_POWER_VERSION
,
1519 .mod_params
= &iwl50_mod_params
,
1522 struct iwl_cfg iwl5100_bg_cfg
= {
1524 .fw_name
= IWL5000_MODULE_FIRMWARE
,
1526 .ops
= &iwl5000_ops
,
1527 .eeprom_size
= IWL_5000_EEPROM_IMG_SIZE
,
1528 .eeprom_ver
= EEPROM_5000_EEPROM_VERSION
,
1529 .eeprom_calib_ver
= EEPROM_5000_TX_POWER_VERSION
,
1530 .mod_params
= &iwl50_mod_params
,
1533 struct iwl_cfg iwl5100_abg_cfg
= {
1535 .fw_name
= IWL5000_MODULE_FIRMWARE
,
1536 .sku
= IWL_SKU_A
|IWL_SKU_G
,
1537 .ops
= &iwl5000_ops
,
1538 .eeprom_size
= IWL_5000_EEPROM_IMG_SIZE
,
1539 .eeprom_ver
= EEPROM_5000_EEPROM_VERSION
,
1540 .eeprom_calib_ver
= EEPROM_5000_TX_POWER_VERSION
,
1541 .mod_params
= &iwl50_mod_params
,
1544 struct iwl_cfg iwl5100_agn_cfg
= {
1546 .fw_name
= IWL5000_MODULE_FIRMWARE
,
1547 .sku
= IWL_SKU_A
|IWL_SKU_G
|IWL_SKU_N
,
1548 .ops
= &iwl5000_ops
,
1549 .eeprom_size
= IWL_5000_EEPROM_IMG_SIZE
,
1550 .eeprom_ver
= EEPROM_5000_EEPROM_VERSION
,
1551 .eeprom_calib_ver
= EEPROM_5000_TX_POWER_VERSION
,
1552 .mod_params
= &iwl50_mod_params
,
1555 struct iwl_cfg iwl5350_agn_cfg
= {
1557 .fw_name
= IWL5000_MODULE_FIRMWARE
,
1558 .sku
= IWL_SKU_A
|IWL_SKU_G
|IWL_SKU_N
,
1559 .ops
= &iwl5000_ops
,
1560 .eeprom_size
= IWL_5000_EEPROM_IMG_SIZE
,
1561 .eeprom_ver
= EEPROM_5050_EEPROM_VERSION
,
1562 .eeprom_calib_ver
= EEPROM_5050_TX_POWER_VERSION
,
1563 .mod_params
= &iwl50_mod_params
,
1566 MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE
);
1568 module_param_named(disable50
, iwl50_mod_params
.disable
, int, 0444);
1569 MODULE_PARM_DESC(disable50
,
1570 "manually disable the 50XX radio (default 0 [radio on])");
1571 module_param_named(swcrypto50
, iwl50_mod_params
.sw_crypto
, bool, 0444);
1572 MODULE_PARM_DESC(swcrypto50
,
1573 "using software crypto engine (default 0 [hardware])\n");
1574 module_param_named(debug50
, iwl50_mod_params
.debug
, int, 0444);
1575 MODULE_PARM_DESC(debug50
, "50XX debug output mask");
1576 module_param_named(queues_num50
, iwl50_mod_params
.num_of_queues
, int, 0444);
1577 MODULE_PARM_DESC(queues_num50
, "number of hw queues in 50xx series");
1578 module_param_named(qos_enable50
, iwl50_mod_params
.enable_qos
, int, 0444);
1579 MODULE_PARM_DESC(qos_enable50
, "enable all 50XX QoS functionality");
1580 module_param_named(11n_disable50
, iwl50_mod_params
.disable_11n
, int, 0444);
1581 MODULE_PARM_DESC(11n_disable50
, "disable 50XX 11n functionality");
1582 module_param_named(amsdu_size_8K50
, iwl50_mod_params
.amsdu_size_8K
, int, 0444);
1583 MODULE_PARM_DESC(amsdu_size_8K50
, "enable 8K amsdu size in 50XX series");
1584 module_param_named(fw_restart50
, iwl50_mod_params
.restart_fw
, int, 0444);
1585 MODULE_PARM_DESC(fw_restart50
, "restart firmware in case of error");