1 /******************************************************************************
3 * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * James P. Ketrenos <ipw2100-admin@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
27 * Please use this file (iwl-dev.h) for driver implementation definitions.
28 * Please use iwl-commands.h for uCode API definitions.
29 * Please use iwl-4965-hw.h for hardware-related definitions.
35 #include <linux/pci.h> /* for struct pci_device_id */
36 #include <linux/kernel.h>
37 #include <net/ieee80211_radiotap.h>
39 #define DRV_NAME "iwlagn"
40 #include "iwl-rfkill.h"
41 #include "iwl-eeprom.h"
42 #include "iwl-4965-hw.h"
45 #include "iwl-debug.h"
47 #include "iwl-power.h"
48 #include "iwl-agn-rs.h"
50 /* configuration for the iwl4965 */
51 extern struct iwl_cfg iwl4965_agn_cfg
;
52 extern struct iwl_cfg iwl5300_agn_cfg
;
53 extern struct iwl_cfg iwl5100_agn_cfg
;
54 extern struct iwl_cfg iwl5350_agn_cfg
;
55 extern struct iwl_cfg iwl5100_bg_cfg
;
56 extern struct iwl_cfg iwl5100_abg_cfg
;
58 /* CT-KILL constants */
59 #define CT_KILL_THRESHOLD 110 /* in Celsius */
61 /* Default noise level to report when noise measurement is not available.
62 * This may be because we're:
63 * 1) Not associated (4965, no beacon statistics being sent to driver)
64 * 2) Scanning (noise measurement does not apply to associated channel)
65 * 3) Receiving CCK (3945 delivers noise info only for OFDM frames)
66 * Use default noise value of -127 ... this is below the range of measurable
67 * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
68 * Also, -127 works better than 0 when averaging frames with/without
69 * noise info (e.g. averaging might be done in app); measured dBm values are
70 * always negative ... using a negative value as the default keeps all
71 * averages within an s8's (used in some apps) range of negative values. */
72 #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
75 * RTS threshold here is total size [2347] minus 4 FCS bytes
77 * a value of 0 means RTS on all data/management packets
78 * a value > max MSDU size means no RTS
79 * else RTS for data/management frames where MPDU is larger
82 #define DEFAULT_RTS_THRESHOLD 2347U
83 #define MIN_RTS_THRESHOLD 0U
84 #define MAX_RTS_THRESHOLD 2347U
85 #define MAX_MSDU_SIZE 2304U
86 #define MAX_MPDU_SIZE 2346U
87 #define DEFAULT_BEACON_INTERVAL 100U
88 #define DEFAULT_SHORT_RETRY_LIMIT 7U
89 #define DEFAULT_LONG_RETRY_LIMIT 4U
91 struct iwl_rx_mem_buffer
{
92 dma_addr_t real_dma_addr
;
93 dma_addr_t aligned_dma_addr
;
95 struct list_head list
;
99 * Generic queue structure
101 * Contains common data for Rx and Tx queues
104 int n_bd
; /* number of BDs in this queue */
105 int write_ptr
; /* 1-st empty entry (index) host_w*/
106 int read_ptr
; /* last used entry (index) host_r*/
107 dma_addr_t dma_addr
; /* physical addr for BD's */
108 int n_window
; /* safe queue window */
110 int low_mark
; /* low watermark, resume queue if free
111 * space more than this */
112 int high_mark
; /* high watermark, stop queue if free
113 * space less than this */
114 } __attribute__ ((packed
));
116 /* One for each TFD */
118 struct sk_buff
*skb
[IWL_NUM_OF_TBS
- 1];
122 * struct iwl_tx_queue - Tx Queue for DMA
123 * @q: generic Rx/Tx queue descriptor
124 * @bd: base of circular buffer of TFDs
125 * @cmd: array of command/Tx buffers
126 * @dma_addr_cmd: physical address of cmd/tx buffer array
127 * @txb: array of per-TFD driver data
128 * @need_update: indicates need to update read/write index
129 * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
131 * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
132 * descriptors) and required locking structures.
134 struct iwl_tx_queue
{
136 struct iwl_tfd
*tfds
;
137 struct iwl_cmd
*cmd
[TFD_TX_CMD_SLOTS
];
138 struct iwl_tx_info
*txb
;
145 #define IWL_NUM_SCAN_RATES (2)
147 struct iwl4965_channel_tgd_info
{
152 struct iwl4965_channel_tgh_info
{
157 * One for each channel, holds all channel setup data
158 * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
161 struct iwl_channel_info
{
162 struct iwl4965_channel_tgd_info tgd
;
163 struct iwl4965_channel_tgh_info tgh
;
164 struct iwl_eeprom_channel eeprom
; /* EEPROM regulatory limit */
165 struct iwl_eeprom_channel fat_eeprom
; /* EEPROM regulatory limit for
168 u8 channel
; /* channel number */
169 u8 flags
; /* flags copied from EEPROM */
170 s8 max_power_avg
; /* (dBm) regul. eeprom, normal Tx, any rate */
171 s8 curr_txpow
; /* (dBm) regulatory/spectrum/user (not h/w) limit */
172 s8 min_power
; /* always 0 */
173 s8 scan_power
; /* (dBm) regul. eeprom, direct scans, any rate */
175 u8 group_index
; /* 0-4, maps channel to group1/2/3/4/5 */
176 u8 band_index
; /* 0-4, maps channel to band1/2/3/4/5 */
177 enum ieee80211_band band
;
179 /* FAT channel info */
180 s8 fat_max_power_avg
; /* (dBm) regul. eeprom, normal Tx, any rate */
181 s8 fat_curr_txpow
; /* (dBm) regulatory/spectrum/user (not h/w) */
182 s8 fat_min_power
; /* always 0 */
183 s8 fat_scan_power
; /* (dBm) eeprom, direct scans, any rate */
184 u8 fat_flags
; /* flags copied from EEPROM */
185 u8 fat_extension_channel
; /* HT_IE_EXT_CHANNEL_* */
188 struct iwl4965_clip_group
{
189 /* maximum power level to prevent clipping for each rate, derived by
190 * us from this band's saturation power in EEPROM */
191 const s8 clip_powers
[IWL_MAX_RATES
];
195 #define IWL_TX_FIFO_AC0 0
196 #define IWL_TX_FIFO_AC1 1
197 #define IWL_TX_FIFO_AC2 2
198 #define IWL_TX_FIFO_AC3 3
199 #define IWL_TX_FIFO_HCCA_1 5
200 #define IWL_TX_FIFO_HCCA_2 6
201 #define IWL_TX_FIFO_NONE 7
203 /* Minimum number of queues. MAX_NUM is defined in hw specific files */
204 #define IWL_MIN_NUM_QUEUES 4
206 /* Power management (not Tx power) structures */
213 #define IEEE80211_DATA_LEN 2304
214 #define IEEE80211_4ADDR_LEN 30
215 #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
216 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
220 struct ieee80211_hdr frame
;
221 struct iwl_tx_beacon_cmd beacon
;
222 u8 raw
[IEEE80211_FRAME_LEN
];
225 struct list_head list
;
228 #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
229 #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
230 #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
233 /* CMD_SIZE_NORMAL = 0, */
234 CMD_SIZE_HUGE
= (1 << 0),
236 CMD_ASYNC
= (1 << 1),
237 /* CMD_NO_SKB = 0, */
238 CMD_WANT_SKB
= (1 << 2),
244 struct iwl_cmd_meta
{
245 struct iwl_cmd_meta
*source
;
248 int (*callback
)(struct iwl_priv
*priv
,
249 struct iwl_cmd
*cmd
, struct sk_buff
*skb
);
250 } __attribute__ ((packed
)) u
;
252 /* The CMD_SIZE_HUGE flag bit indicates that the command
253 * structure is stored at the end of the shared queue memory. */
255 DECLARE_PCI_UNMAP_ADDR(mapping
)
256 DECLARE_PCI_UNMAP_LEN(len
)
257 } __attribute__ ((packed
));
259 #define IWL_CMD_MAX_PAYLOAD 320
264 * For allocation of the command and tx queues, this establishes the overall
265 * size of the largest command we send to uCode, except for a scan command
266 * (which is relatively huge; space is allocated separately).
269 struct iwl_cmd_meta meta
; /* driver data */
270 struct iwl_cmd_header hdr
; /* uCode API */
276 struct iwl_tx_cmd tx
;
277 u8 payload
[IWL_CMD_MAX_PAYLOAD
];
278 } __attribute__ ((packed
)) cmd
;
279 } __attribute__ ((packed
));
282 struct iwl_host_cmd
{
285 struct iwl_cmd_meta meta
;
289 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_cmd) - \
290 sizeof(struct iwl_cmd_meta))
293 * RX related structures and functions
295 #define RX_FREE_BUFFERS 64
296 #define RX_LOW_WATERMARK 8
298 #define SUP_RATE_11A_MAX_NUM_CHANNELS 8
299 #define SUP_RATE_11B_MAX_NUM_CHANNELS 4
300 #define SUP_RATE_11G_MAX_NUM_CHANNELS 12
303 * struct iwl_rx_queue - Rx queue
304 * @read: Shared index to newest available Rx buffer
305 * @write: Shared index to oldest written Rx packet
306 * @free_count: Number of pre-allocated buffers in rx_free
307 * @rx_free: list of free SKBs for use
308 * @rx_used: List of Rx buffers with no SKB
309 * @need_update: flag to indicate we need to update read/write index
311 * NOTE: rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers
313 struct iwl_rx_queue
{
316 struct iwl_rx_mem_buffer pool
[RX_QUEUE_SIZE
+ RX_FREE_BUFFERS
];
317 struct iwl_rx_mem_buffer
*queue
[RX_QUEUE_SIZE
];
321 struct list_head rx_free
;
322 struct list_head rx_used
;
324 struct iwl_rb_status
*rb_stts
;
325 dma_addr_t rb_stts_dma
;
329 #define IWL_SUPPORTED_RATES_IE_LEN 8
331 #define SCAN_INTERVAL 100
333 #define MAX_A_CHANNELS 252
334 #define MIN_A_CHANNELS 7
336 #define MAX_B_CHANNELS 14
337 #define MIN_B_CHANNELS 1
339 #define MAX_TID_COUNT 9
341 #define IWL_INVALID_RATE 0xFF
342 #define IWL_INVALID_VALUE -1
345 * struct iwl_ht_agg -- aggregation status while waiting for block-ack
346 * @txq_id: Tx queue used for Tx attempt
347 * @frame_count: # frames attempted by Tx command
348 * @wait_for_ba: Expect block-ack before next Tx reply
349 * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx window
350 * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx window
351 * @bitmap1: High order, one bit for each frame pending ACK in Tx window
352 * @rate_n_flags: Rate at which Tx was attempted
354 * If REPLY_TX indicates that aggregation was attempted, driver must wait
355 * for block ack (REPLY_COMPRESSED_BA). This struct stores tx reply info
356 * until block ack arrives.
365 #define IWL_AGG_OFF 0
367 #define IWL_EMPTYING_HW_QUEUE_ADDBA 2
368 #define IWL_EMPTYING_HW_QUEUE_DELBA 3
373 struct iwl_tid_data
{
376 struct iwl_ht_agg agg
;
380 enum ieee80211_key_alg alg
;
386 union iwl4965_ht_rate_supp
{
394 #define CFG_HT_RX_AMPDU_FACTOR_DEF (0x3)
395 #define CFG_HT_MPDU_DENSITY_2USEC (0x5)
396 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_2USEC
399 /* self configuration data */
401 u8 supported_chan_width
;
404 u8 sgf
; /* HT_SHORT_GI_* short guard interval */
408 struct ieee80211_mcs_info mcs
;
409 /* BSS related data */
410 u8 extension_chan_offset
;
413 u8 non_GF_STA_present
;
416 union iwl_qos_capabity
{
418 u8 edca_count
:4; /* bit 0-3 */
419 u8 q_ack
:1; /* bit 4 */
420 u8 queue_request
:1; /* bit 5 */
421 u8 txop_request
:1; /* bit 6 */
422 u8 reserved
:1; /* bit 7 */
425 u8 acvo_APSD
:1; /* bit 0 */
426 u8 acvi_APSD
:1; /* bit 1 */
427 u8 ac_bk_APSD
:1; /* bit 2 */
428 u8 ac_be_APSD
:1; /* bit 3 */
429 u8 q_ack
:1; /* bit 4 */
430 u8 max_len
:2; /* bit 5-6 */
431 u8 more_data_ack
:1; /* bit 7 */
437 struct iwl_qos_info
{
440 union iwl_qos_capabity qos_cap
;
441 struct iwl_qosparam_cmd def_qos_parm
;
444 #define STA_PS_STATUS_WAKE 0
445 #define STA_PS_STATUS_SLEEP 1
447 struct iwl_station_entry
{
448 struct iwl_addsta_cmd sta
;
449 struct iwl_tid_data tid
[MAX_TID_COUNT
];
452 struct iwl_hw_key keyinfo
;
455 /* one for each uCode image (inst/data, boot/init/runtime) */
457 void *v_addr
; /* access by driver */
458 dma_addr_t p_addr
; /* access by card's busmaster DMA */
462 /* uCode file layout */
464 __le32 ver
; /* major/minor/subminor */
465 __le32 inst_size
; /* bytes of runtime instructions */
466 __le32 data_size
; /* bytes of runtime data */
467 __le32 init_size
; /* bytes of initialization instructions */
468 __le32 init_data_size
; /* bytes of initialization data */
469 __le32 boot_size
; /* bytes of bootstrap instructions */
470 u8 data
[0]; /* data in same order as "size" elements */
473 struct iwl4965_ibss_seq
{
477 unsigned long packet_time
;
478 struct list_head list
;
481 struct iwl_sensitivity_ranges
{
488 u16 auto_corr_min_ofdm
;
489 u16 auto_corr_min_ofdm_mrc
;
490 u16 auto_corr_min_ofdm_x1
;
491 u16 auto_corr_min_ofdm_mrc_x1
;
493 u16 auto_corr_max_ofdm
;
494 u16 auto_corr_max_ofdm_mrc
;
495 u16 auto_corr_max_ofdm_x1
;
496 u16 auto_corr_max_ofdm_mrc_x1
;
498 u16 auto_corr_max_cck
;
499 u16 auto_corr_max_cck_mrc
;
500 u16 auto_corr_min_cck
;
501 u16 auto_corr_min_cck_mrc
;
505 #define IWL_FAT_CHANNEL_52 BIT(IEEE80211_BAND_5GHZ)
508 * struct iwl_hw_params
509 * @max_txq_num: Max # Tx queues supported
510 * @scd_bc_tbls_size: size of scheduler byte count tables
511 * @tx/rx_chains_num: Number of TX/RX chains
512 * @valid_tx/rx_ant: usable antennas
513 * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
514 * @max_rxq_log: Log-base-2 of max_rxq_size
515 * @rx_buf_size: Rx buffer size
518 * @fat_channel: is 40MHz width possible in band 2.4
519 * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
520 * @sw_crypto: 0 for hw, 1 for sw
521 * @max_xxx_size: for ucode uses
522 * @ct_kill_threshold: temperature threshold
523 * @calib_init_cfg: setup initial calibrations for the hw
524 * @struct iwl_sensitivity_ranges: range of sensitivity values
526 struct iwl_hw_params
{
528 u16 scd_bc_tbls_size
;
544 u32 ct_kill_threshold
; /* value in hw-dependent units */
546 const struct iwl_sensitivity_ranges
*sens
;
549 #define HT_SHORT_GI_20MHZ (1 << 0)
550 #define HT_SHORT_GI_40MHZ (1 << 1)
553 #define IWL_RX_HDR(x) ((struct iwl4965_rx_frame_hdr *)(\
554 x->u.rx_frame.stats.payload + \
555 x->u.rx_frame.stats.phy_count))
556 #define IWL_RX_END(x) ((struct iwl4965_rx_frame_end *)(\
557 IWL_RX_HDR(x)->payload + \
558 le16_to_cpu(IWL_RX_HDR(x)->len)))
559 #define IWL_RX_STATS(x) (&x->u.rx_frame.stats)
560 #define IWL_RX_DATA(x) (IWL_RX_HDR(x)->payload)
562 /******************************************************************************
564 * Functions implemented in core module which are forward declared here
565 * for use by iwl-[4-5].c
567 * NOTE: The implementation of these functions are not hardware specific
568 * which is why they are in the core module files.
570 * Naming convention --
571 * iwl_ <-- Is part of iwlwifi
572 * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
573 * iwl4965_bg_ <-- Called from work queue context
574 * iwl4965_mac_ <-- mac80211 callback
576 ****************************************************************************/
577 extern void iwl_update_chain_flags(struct iwl_priv
*priv
);
578 extern int iwl_set_pwr_src(struct iwl_priv
*priv
, enum iwl_pwr_src src
);
579 extern const u8 iwl_bcast_addr
[ETH_ALEN
];
580 extern int iwl_rxq_stop(struct iwl_priv
*priv
);
581 extern void iwl_txq_ctx_stop(struct iwl_priv
*priv
);
582 extern int iwl_queue_space(const struct iwl_queue
*q
);
583 static inline int iwl_queue_used(const struct iwl_queue
*q
, int i
)
585 return q
->write_ptr
> q
->read_ptr
?
586 (i
>= q
->read_ptr
&& i
< q
->write_ptr
) :
587 !(i
< q
->read_ptr
&& i
>= q
->write_ptr
);
591 static inline u8
get_cmd_index(struct iwl_queue
*q
, u32 index
, int is_huge
)
593 /* This is for scan command, the big buffer at end of command array */
595 return q
->n_window
; /* must be power of 2 */
597 /* Otherwise, use normal size buffers */
598 return index
& (q
->n_window
- 1);
611 #define IWL_CHANNEL_WIDTH_20MHZ 0
612 #define IWL_CHANNEL_WIDTH_40MHZ 1
614 #define IWL_OPERATION_MODE_AUTO 0
615 #define IWL_OPERATION_MODE_HT_ONLY 1
616 #define IWL_OPERATION_MODE_MIXED 2
617 #define IWL_OPERATION_MODE_20MHZ 3
619 #define IWL_TX_CRC_SIZE 4
620 #define IWL_TX_DELIMITER_SIZE 4
622 #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
624 /* Sensitivity and chain noise calibration */
625 #define INTERFERENCE_DATA_AVAILABLE __constant_cpu_to_le32(1)
626 #define INITIALIZATION_VALUE 0xFFFF
627 #define CAL_NUM_OF_BEACONS 20
628 #define MAXIMUM_ALLOWED_PATHLOSS 15
630 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
632 #define MAX_FA_OFDM 50
633 #define MIN_FA_OFDM 5
634 #define MAX_FA_CCK 50
637 #define AUTO_CORR_STEP_OFDM 1
639 #define AUTO_CORR_STEP_CCK 3
640 #define AUTO_CORR_MAX_TH_CCK 160
643 #define NRG_STEP_CCK 2
645 #define MAX_NUMBER_CCK_NO_FA 100
647 #define AUTO_CORR_CCK_MIN_VAL_DEF (125)
652 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
653 #define ALL_BAND_FILTER 0xFF00
654 #define IN_BAND_FILTER 0xFF
655 #define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF
657 #define NRG_NUM_PREV_STAT_L 20
658 #define NUM_RX_CHAINS 3
660 enum iwl4965_false_alarm_state
{
663 IWL_FA_GOOD_RANGE
= 2,
666 enum iwl4965_chain_noise_state
{
667 IWL_CHAIN_NOISE_ALIVE
= 0, /* must be 0 */
668 IWL_CHAIN_NOISE_ACCUMULATE
,
669 IWL_CHAIN_NOISE_CALIBRATED
,
670 IWL_CHAIN_NOISE_DONE
,
673 enum iwl4965_calib_enabled_state
{
674 IWL_CALIB_DISABLED
= 0, /* must be 0 */
675 IWL_CALIB_ENABLED
= 1,
678 struct statistics_general_data
{
679 u32 beacon_silence_rssi_a
;
680 u32 beacon_silence_rssi_b
;
681 u32 beacon_silence_rssi_c
;
690 * defines the order in which results of initial calibrations
691 * should be sent to the runtime uCode
697 IWL_CALIB_TX_IQ_PERD
,
702 /* Opaque calibration results */
703 struct iwl_calib_result
{
714 /* Sensitivity calib data */
715 struct iwl_sensitivity_data
{
717 u32 auto_corr_ofdm_mrc
;
718 u32 auto_corr_ofdm_x1
;
719 u32 auto_corr_ofdm_mrc_x1
;
721 u32 auto_corr_cck_mrc
;
723 u32 last_bad_plcp_cnt_ofdm
;
724 u32 last_fa_cnt_ofdm
;
725 u32 last_bad_plcp_cnt_cck
;
731 u8 nrg_silence_rssi
[NRG_NUM_PREV_STAT_L
];
736 s32 nrg_auto_corr_silence_diff
;
737 u32 num_in_cck_no_fa
;
741 /* Chain noise (differential Rx gain) calib data */
742 struct iwl_chain_noise_data
{
751 u8 disconn_array
[NUM_RX_CHAINS
];
752 u8 delta_gain_code
[NUM_RX_CHAINS
];
757 #define EEPROM_SEM_TIMEOUT 10 /* milliseconds */
758 #define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
762 MEASUREMENT_READY
= (1 << 0),
763 MEASUREMENT_ACTIVE
= (1 << 1),
767 #define IWL_MAX_NUM_QUEUES 20 /* FIXME: do dynamic allocation */
771 /* ieee device used by generic ieee processing code */
772 struct ieee80211_hw
*hw
;
773 struct ieee80211_channel
*ieee_channels
;
774 struct ieee80211_rate
*ieee_rates
;
777 /* temporary frame storage list */
778 struct list_head free_frames
;
781 enum ieee80211_band band
;
784 void (*rx_handlers
[REPLY_MAX
])(struct iwl_priv
*priv
,
785 struct iwl_rx_mem_buffer
*rxb
);
787 struct ieee80211_supported_band bands
[IEEE80211_NUM_BANDS
];
789 #ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT
790 /* spectrum measurement report caching */
791 struct iwl4965_spectrum_notification measure_report
;
792 u8 measurement_status
;
794 /* ucode beacon time */
795 u32 ucode_beacon_time
;
797 /* we allocate array of iwl4965_channel_info for NIC's valid channels.
798 * Access via channel # using indirect index array */
799 struct iwl_channel_info
*channel_info
; /* channel info array */
800 u8 channel_count
; /* # of channels */
802 /* each calibration channel group in the EEPROM has a derived
803 * clip setting for each rate. */
804 const struct iwl4965_clip_group clip_groups
[5];
806 /* thermal calibration */
807 s32 temperature
; /* degrees Kelvin */
808 s32 last_temperature
;
810 /* init calibration results */
811 struct iwl_calib_result calib_results
[IWL_CALIB_MAX
];
813 /* Scan related variables */
814 unsigned long last_scan_jiffies
;
815 unsigned long next_scan_jiffies
;
816 unsigned long scan_start
;
817 unsigned long scan_pass_start
;
818 unsigned long scan_start_tsf
;
819 struct iwl_scan_cmd
*scan
;
823 u8 direct_ssid
[IW_ESSID_MAX_SIZE
];
824 u8 scan_tx_ant
[IEEE80211_NUM_BANDS
];
828 spinlock_t lock
; /* protect general shared data */
829 spinlock_t hcmd_lock
; /* protect hcmd */
832 /* basic pci-network driver stuff */
833 struct pci_dev
*pci_dev
;
835 /* pci hardware address support */
836 void __iomem
*hw_base
;
841 /* uCode images, save to reload in case of failure */
842 struct fw_desc ucode_code
; /* runtime inst */
843 struct fw_desc ucode_data
; /* runtime data original */
844 struct fw_desc ucode_data_backup
; /* runtime data save/restore */
845 struct fw_desc ucode_init
; /* initialization inst */
846 struct fw_desc ucode_init_data
; /* initialization data */
847 struct fw_desc ucode_boot
; /* bootstrap inst */
848 enum ucode_type ucode_type
;
849 u8 ucode_write_complete
; /* the image write is complete */
852 struct iwl_rxon_time_cmd rxon_timing
;
854 /* We declare this const so it can only be
855 * changed via explicit cast within the
856 * routines that actually update the physical
858 const struct iwl_rxon_cmd active_rxon
;
859 struct iwl_rxon_cmd staging_rxon
;
861 int error_recovering
;
862 struct iwl_rxon_cmd recovery_rxon
;
864 /* 1st responses from initialize and runtime uCode images.
865 * 4965's initialize alive response contains some calibration data. */
866 struct iwl_init_alive_resp card_alive_init
;
867 struct iwl_alive_resp card_alive
;
868 #ifdef CONFIG_IWLWIFI_RFKILL
869 struct rfkill
*rfkill
;
872 #ifdef CONFIG_IWLWIFI_LEDS
873 struct iwl_led led
[IWL_LED_TRG_MAX
];
874 unsigned long last_blink_time
;
881 u16 active_rate_basic
;
883 u8 assoc_station_added
;
885 struct iwl_sensitivity_data sensitivity_data
;
886 struct iwl_chain_noise_data chain_noise_data
;
887 __le16 sensitivity_tbl
[HD_TABLE_SIZE
];
889 struct iwl_ht_info current_ht_config
;
890 u8 last_phy_res
[100];
892 /* Rate scaling data */
896 wait_queue_head_t wait_command_queue
;
898 int activity_timer_active
;
900 /* Rx and Tx DMA processing queues */
901 struct iwl_rx_queue rxq
;
902 struct iwl_tx_queue txq
[IWL_MAX_NUM_QUEUES
];
903 unsigned long txq_ctx_active_msk
;
904 struct iwl_dma_ptr kw
; /* keep warm address */
905 struct iwl_dma_ptr scd_bc_tbls
;
907 u32 scd_base_addr
; /* scheduler sram base address */
909 unsigned long status
;
911 int last_rx_rssi
; /* From Rx packet statistics */
912 int last_rx_noise
; /* From beacon statistics */
914 /* counts mgmt, ctl, and data packets */
915 struct traffic_stats
{
918 } tx_stats
[3], rx_stats
[3];
920 struct iwl_power_mgr power_data
;
922 struct iwl_notif_statistics statistics
;
923 unsigned long last_statistics_time
;
925 /* context information */
932 u8 mac_addr
[ETH_ALEN
];
934 /*station table variables */
937 struct iwl_station_entry stations
[IWL_STATION_COUNT
];
938 struct iwl_wep_key wep_keys
[WEP_KEYS_MAX
];
941 unsigned long ucode_key_table
;
943 /* Indication if ieee80211_ops->open has been called */
946 u8 mac80211_registered
;
948 /* Rx'd packet timing information */
949 u32 last_beacon_time
;
954 struct iwl_eeprom_calib_info
*calib_info
;
956 enum nl80211_iftype iw_mode
;
958 struct sk_buff
*ibss_beacon
;
960 /* Last Rx'd beacon timestamp */
963 struct ieee80211_vif
*vif
;
965 struct iwl_hw_params hw_params
;
968 /* Current association information needed to configure the
971 u16 assoc_capability
;
973 struct iwl_qos_info qos_data
;
975 struct workqueue_struct
*workqueue
;
977 struct work_struct up
;
978 struct work_struct restart
;
979 struct work_struct calibrated_work
;
980 struct work_struct scan_completed
;
981 struct work_struct rx_replenish
;
982 struct work_struct rf_kill
;
983 struct work_struct abort_scan
;
984 struct work_struct update_link_led
;
985 struct work_struct auth_work
;
986 struct work_struct report_work
;
987 struct work_struct request_scan
;
988 struct work_struct beacon_update
;
990 struct tasklet_struct irq_tasklet
;
992 struct delayed_work set_power_save
;
993 struct delayed_work init_alive_start
;
994 struct delayed_work alive_start
;
995 struct delayed_work scan_check
;
997 s8 tx_power_user_lmt
;
998 s8 tx_power_channel_lmt
;
1004 #ifdef CONFIG_IWLWIFI_DEBUG
1005 /* debugging info */
1008 atomic_t restrict_refcnt
;
1009 #ifdef CONFIG_IWLWIFI_DEBUGFS
1011 struct iwl_debugfs
*dbgfs
;
1012 #endif /* CONFIG_IWLWIFI_DEBUGFS */
1013 #endif /* CONFIG_IWLWIFI_DEBUG */
1015 struct work_struct txpower_work
;
1016 u32 disable_sens_cal
;
1017 u32 disable_chain_noise_cal
;
1018 u32 disable_tx_power_cal
;
1019 struct work_struct run_time_calib_work
;
1020 struct timer_list statistics_periodic
;
1023 static inline void iwl_txq_ctx_activate(struct iwl_priv
*priv
, int txq_id
)
1025 set_bit(txq_id
, &priv
->txq_ctx_active_msk
);
1028 static inline void iwl_txq_ctx_deactivate(struct iwl_priv
*priv
, int txq_id
)
1030 clear_bit(txq_id
, &priv
->txq_ctx_active_msk
);
1033 #ifdef CONFIG_IWLWIFI_DEBUG
1034 const char *iwl_get_tx_fail_reason(u32 status
);
1036 static inline const char *iwl_get_tx_fail_reason(u32 status
) { return ""; }
1040 static inline struct ieee80211_hdr
*iwl_tx_queue_get_hdr(struct iwl_priv
*priv
,
1041 int txq_id
, int idx
)
1043 if (priv
->txq
[txq_id
].txb
[idx
].skb
[0])
1044 return (struct ieee80211_hdr
*)priv
->txq
[txq_id
].
1045 txb
[idx
].skb
[0]->data
;
1050 static inline int iwl_is_associated(struct iwl_priv
*priv
)
1052 return (priv
->active_rxon
.filter_flags
& RXON_FILTER_ASSOC_MSK
) ? 1 : 0;
1055 static inline int is_channel_valid(const struct iwl_channel_info
*ch_info
)
1057 if (ch_info
== NULL
)
1059 return (ch_info
->flags
& EEPROM_CHANNEL_VALID
) ? 1 : 0;
1062 static inline int is_channel_radar(const struct iwl_channel_info
*ch_info
)
1064 return (ch_info
->flags
& EEPROM_CHANNEL_RADAR
) ? 1 : 0;
1067 static inline u8
is_channel_a_band(const struct iwl_channel_info
*ch_info
)
1069 return ch_info
->band
== IEEE80211_BAND_5GHZ
;
1072 static inline u8
is_channel_bg_band(const struct iwl_channel_info
*ch_info
)
1074 return ch_info
->band
== IEEE80211_BAND_2GHZ
;
1077 static inline int is_channel_passive(const struct iwl_channel_info
*ch
)
1079 return (!(ch
->flags
& EEPROM_CHANNEL_ACTIVE
)) ? 1 : 0;
1082 static inline int is_channel_ibss(const struct iwl_channel_info
*ch
)
1084 return ((ch
->flags
& EEPROM_CHANNEL_IBSS
)) ? 1 : 0;
1087 extern const struct iwl_channel_info
*iwl_get_channel_info(
1088 const struct iwl_priv
*priv
, enum ieee80211_band band
, u16 channel
);
1090 /* Requires full declaration of iwl_priv before including */
1092 #endif /* __iwl_dev_h__ */