ath9k: Replace ath9k_opmode with nl80211_iftype

[linux/fpc-iii.git] / drivers / net / wireless / libertas / if_cs.c

/*

  Driver for the Marvell 8385 based compact flash WLAN cards.

  (C) 2007 by Holger Schurig <hs4233@mail.mn-solutions.de>

  This program is free software; you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation; either version 2 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program; see the file COPYING.  If not, write to
  the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
  Boston, MA 02110-1301, USA.

*/

#include <linux/module.h>
#include <linux/delay.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
#include <linux/netdevice.h>

#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>

#include <linux/io.h>

#define DRV_NAME "libertas_cs"

#include "decl.h"
#include "defs.h"
#include "dev.h"


/********************************************************************/
/* Module stuff                                                     */
/********************************************************************/

MODULE_AUTHOR("Holger Schurig <hs4233@mail.mn-solutions.de>");
MODULE_DESCRIPTION("Driver for Marvell 83xx compact flash WLAN cards");
MODULE_LICENSE("GPL");



/********************************************************************/
/* Data structures                                                  */
/********************************************************************/

struct if_cs_card {
        struct pcmcia_device *p_dev;
        struct lbs_private *priv;
        void __iomem *iobase;
};



/********************************************************************/
/* Hardware access                                                  */
/********************************************************************/

/* This define enables wrapper functions which allow you
   to dump all register accesses. You normally won't this,
   except for development */
/* #define DEBUG_IO */

#ifdef DEBUG_IO
static int debug_output = 0;
#else
/* This way the compiler optimizes the printk's away */
#define debug_output 0
#endif

static inline unsigned int if_cs_read8(struct if_cs_card *card, uint reg)
{
        unsigned int val = ioread8(card->iobase + reg);
        if (debug_output)
                printk(KERN_INFO "inb %08x<%02x\n", reg, val);
        return val;
}
static inline unsigned int if_cs_read16(struct if_cs_card *card, uint reg)
{
        unsigned int val = ioread16(card->iobase + reg);
        if (debug_output)
                printk(KERN_INFO "inw %08x<%04x\n", reg, val);
        return val;
}
static inline void if_cs_read16_rep(
        struct if_cs_card *card,
        uint reg,
        void *buf,
        unsigned long count)
{
        if (debug_output)
                printk(KERN_INFO "insw %08x<(0x%lx words)\n",
                        reg, count);
        ioread16_rep(card->iobase + reg, buf, count);
}

static inline void if_cs_write8(struct if_cs_card *card, uint reg, u8 val)
{
        if (debug_output)
                printk(KERN_INFO "outb %08x>%02x\n", reg, val);
        iowrite8(val, card->iobase + reg);
}

static inline void if_cs_write16(struct if_cs_card *card, uint reg, u16 val)
{
        if (debug_output)
                printk(KERN_INFO "outw %08x>%04x\n", reg, val);
        iowrite16(val, card->iobase + reg);
}

static inline void if_cs_write16_rep(
        struct if_cs_card *card,
        uint reg,
        const void *buf,
        unsigned long count)
{
        if (debug_output)
                printk(KERN_INFO "outsw %08x>(0x%lx words)\n",
                        reg, count);
        iowrite16_rep(card->iobase + reg, buf, count);
}


/*
 * I know that polling/delaying is frowned upon. However, this procedure
 * with polling is needed while downloading the firmware. At this stage,
 * the hardware does unfortunately not create any interrupts.
 *
 * Fortunately, this function is never used once the firmware is in
 * the card. :-)
 *
 * As a reference, see the "Firmware Specification v5.1", page 18
 * and 19. I did not follow their suggested timing to the word,
 * but this works nice & fast anyway.
 */
static int if_cs_poll_while_fw_download(struct if_cs_card *card, uint addr, u8 reg)
{
        int i;

        for (i = 0; i < 100000; i++) {
                u8 val = if_cs_read8(card, addr);
                if (val == reg)
                        return i;
                udelay(5);
        }
        return -ETIME;
}



/*
 * First the bitmasks for the host/card interrupt/status registers:
 */
#define IF_CS_BIT_TX                    0x0001
#define IF_CS_BIT_RX                    0x0002
#define IF_CS_BIT_COMMAND               0x0004
#define IF_CS_BIT_RESP                  0x0008
#define IF_CS_BIT_EVENT                 0x0010
#define IF_CS_BIT_MASK                  0x001f



/*
 * It's not really clear to me what the host status register is for. It
 * needs to be set almost in union with "host int cause". The following
 * bits from above are used:
 *
 *   IF_CS_BIT_TX         driver downloaded a data packet
 *   IF_CS_BIT_RX         driver got a data packet
 *   IF_CS_BIT_COMMAND    driver downloaded a command
 *   IF_CS_BIT_RESP       not used (has some meaning with powerdown)
 *   IF_CS_BIT_EVENT      driver read a host event
 */
#define IF_CS_HOST_STATUS               0x00000000

/*
 * With the host int cause register can the host (that is, Linux) cause
 * an interrupt in the firmware, to tell the firmware about those events:
 *
 *   IF_CS_BIT_TX         a data packet has been downloaded
 *   IF_CS_BIT_RX         a received data packet has retrieved
 *   IF_CS_BIT_COMMAND    a firmware block or a command has been downloaded
 *   IF_CS_BIT_RESP       not used (has some meaning with powerdown)
 *   IF_CS_BIT_EVENT      a host event (link lost etc) has been retrieved
 */
#define IF_CS_HOST_INT_CAUSE            0x00000002

/*
 * The host int mask register is used to enable/disable interrupt.  However,
 * I have the suspicion that disabled interrupts are lost.
 */
#define IF_CS_HOST_INT_MASK             0x00000004

/*
 * Used to send or receive data packets:
 */
#define IF_CS_WRITE                     0x00000016
#define IF_CS_WRITE_LEN                 0x00000014
#define IF_CS_READ                      0x00000010
#define IF_CS_READ_LEN                  0x00000024

/*
 * Used to send commands (and to send firmware block) and to
 * receive command responses:
 */
#define IF_CS_CMD                       0x0000001A
#define IF_CS_CMD_LEN                   0x00000018
#define IF_CS_RESP                      0x00000012
#define IF_CS_RESP_LEN                  0x00000030

/*
 * The card status registers shows what the card/firmware actually
 * accepts:
 *
 *   IF_CS_BIT_TX        you may send a data packet
 *   IF_CS_BIT_RX        you may retrieve a data packet
 *   IF_CS_BIT_COMMAND   you may send a command
 *   IF_CS_BIT_RESP      you may retrieve a command response
 *   IF_CS_BIT_EVENT     the card has a event for use (link lost, snr low etc)
 *
 * When reading this register several times, you will get back the same
 * results --- with one exception: the IF_CS_BIT_EVENT clear itself
 * automatically.
 *
 * Not that we don't rely on BIT_RX,_BIT_RESP or BIT_EVENT because
 * we handle this via the card int cause register.
 */
#define IF_CS_CARD_STATUS               0x00000020
#define IF_CS_CARD_STATUS_MASK          0x7f00

/*
 * The card int cause register is used by the card/firmware to notify us
 * about the following events:
 *
 *   IF_CS_BIT_TX        a data packet has successfully been sentx
 *   IF_CS_BIT_RX        a data packet has been received and can be retrieved
 *   IF_CS_BIT_COMMAND   not used
 *   IF_CS_BIT_RESP      the firmware has a command response for us
 *   IF_CS_BIT_EVENT     the card has a event for use (link lost, snr low etc)
 */
#define IF_CS_CARD_INT_CAUSE            0x00000022

/*
 * This is used to for handshaking with the card's bootloader/helper image
 * to synchronize downloading of firmware blocks.
 */
#define IF_CS_SQ_READ_LOW               0x00000028
#define IF_CS_SQ_HELPER_OK              0x10

/*
 * The scratch register tells us ...
 *
 * IF_CS_SCRATCH_BOOT_OK     the bootloader runs
 * IF_CS_SCRATCH_HELPER_OK   the helper firmware already runs
 */
#define IF_CS_SCRATCH                   0x0000003F
#define IF_CS_SCRATCH_BOOT_OK           0x00
#define IF_CS_SCRATCH_HELPER_OK         0x5a

/*
 * Used to detect ancient chips:
 */
#define IF_CS_PRODUCT_ID                0x0000001C
#define IF_CS_CF8385_B1_REV             0x12


/********************************************************************/
/* I/O and interrupt handling                                       */
/********************************************************************/

static inline void if_cs_enable_ints(struct if_cs_card *card)
{
        lbs_deb_enter(LBS_DEB_CS);
        if_cs_write16(card, IF_CS_HOST_INT_MASK, 0);
}

static inline void if_cs_disable_ints(struct if_cs_card *card)
{
        lbs_deb_enter(LBS_DEB_CS);
        if_cs_write16(card, IF_CS_HOST_INT_MASK, IF_CS_BIT_MASK);
}

/*
 * Called from if_cs_host_to_card to send a command to the hardware
 */
static int if_cs_send_cmd(struct lbs_private *priv, u8 *buf, u16 nb)
{
        struct if_cs_card *card = (struct if_cs_card *)priv->card;
        int ret = -1;
        int loops = 0;

        lbs_deb_enter(LBS_DEB_CS);
        if_cs_disable_ints(card);

        /* Is hardware ready? */
        while (1) {
                u16 status = if_cs_read16(card, IF_CS_CARD_STATUS);
                if (status & IF_CS_BIT_COMMAND)
                        break;
                if (++loops > 100) {
                        lbs_pr_err("card not ready for commands\n");
                        goto done;
                }
                mdelay(1);
        }

        if_cs_write16(card, IF_CS_CMD_LEN, nb);

        if_cs_write16_rep(card, IF_CS_CMD, buf, nb / 2);
        /* Are we supposed to transfer an odd amount of bytes? */
        if (nb & 1)
                if_cs_write8(card, IF_CS_CMD, buf[nb-1]);

        /* "Assert the download over interrupt command in the Host
         * status register" */
        if_cs_write16(card, IF_CS_HOST_STATUS, IF_CS_BIT_COMMAND);

        /* "Assert the download over interrupt command in the Card
         * interrupt case register" */
        if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_COMMAND);
        ret = 0;

done:
        if_cs_enable_ints(card);
        lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
        return ret;
}

/*
 * Called from if_cs_host_to_card to send a data to the hardware
 */
static void if_cs_send_data(struct lbs_private *priv, u8 *buf, u16 nb)
{
        struct if_cs_card *card = (struct if_cs_card *)priv->card;
        u16 status;

        lbs_deb_enter(LBS_DEB_CS);
        if_cs_disable_ints(card);

        status = if_cs_read16(card, IF_CS_CARD_STATUS);
        BUG_ON((status & IF_CS_BIT_TX) == 0);

        if_cs_write16(card, IF_CS_WRITE_LEN, nb);

        /* write even number of bytes, then odd byte if necessary */
        if_cs_write16_rep(card, IF_CS_WRITE, buf, nb / 2);
        if (nb & 1)
                if_cs_write8(card, IF_CS_WRITE, buf[nb-1]);

        if_cs_write16(card, IF_CS_HOST_STATUS, IF_CS_BIT_TX);
        if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_TX);
        if_cs_enable_ints(card);

        lbs_deb_leave(LBS_DEB_CS);
}

/*
 * Get the command result out of the card.
 */
static int if_cs_receive_cmdres(struct lbs_private *priv, u8 *data, u32 *len)
{
        unsigned long flags;
        int ret = -1;
        u16 status;

        lbs_deb_enter(LBS_DEB_CS);

        /* is hardware ready? */
        status = if_cs_read16(priv->card, IF_CS_CARD_STATUS);
        if ((status & IF_CS_BIT_RESP) == 0) {
                lbs_pr_err("no cmd response in card\n");
                *len = 0;
                goto out;
        }

        *len = if_cs_read16(priv->card, IF_CS_RESP_LEN);
        if ((*len == 0) || (*len > LBS_CMD_BUFFER_SIZE)) {
                lbs_pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len);
                goto out;
        }

        /* read even number of bytes, then odd byte if necessary */
        if_cs_read16_rep(priv->card, IF_CS_RESP, data, *len/sizeof(u16));
        if (*len & 1)
                data[*len-1] = if_cs_read8(priv->card, IF_CS_RESP);

        /* This is a workaround for a firmware that reports too much
         * bytes */
        *len -= 8;
        ret = 0;

        /* Clear this flag again */
        spin_lock_irqsave(&priv->driver_lock, flags);
        priv->dnld_sent = DNLD_RES_RECEIVED;
        spin_unlock_irqrestore(&priv->driver_lock, flags);

out:
        lbs_deb_leave_args(LBS_DEB_CS, "ret %d, len %d", ret, *len);
        return ret;
}

static struct sk_buff *if_cs_receive_data(struct lbs_private *priv)
{
        struct sk_buff *skb = NULL;
        u16 len;
        u8 *data;

        lbs_deb_enter(LBS_DEB_CS);

        len = if_cs_read16(priv->card, IF_CS_READ_LEN);
        if (len == 0 || len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
                lbs_pr_err("card data buffer has invalid # of bytes (%d)\n", len);
                priv->stats.rx_dropped++;
                goto dat_err;
        }

        skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + 2);
        if (!skb)
                goto out;
        skb_put(skb, len);
        skb_reserve(skb, 2);/* 16 byte align */
        data = skb->data;

        /* read even number of bytes, then odd byte if necessary */
        if_cs_read16_rep(priv->card, IF_CS_READ, data, len/sizeof(u16));
        if (len & 1)
                data[len-1] = if_cs_read8(priv->card, IF_CS_READ);

dat_err:
        if_cs_write16(priv->card, IF_CS_HOST_STATUS, IF_CS_BIT_RX);
        if_cs_write16(priv->card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_RX);

out:
        lbs_deb_leave_args(LBS_DEB_CS, "ret %p", skb);
        return skb;
}

static irqreturn_t if_cs_interrupt(int irq, void *data)
{
        struct if_cs_card *card = data;
        struct lbs_private *priv = card->priv;
        u16 cause;

        lbs_deb_enter(LBS_DEB_CS);

        /* Ask card interrupt cause register if there is something for us */
        cause = if_cs_read16(card, IF_CS_CARD_INT_CAUSE);
        lbs_deb_cs("cause 0x%04x\n", cause);

        if (cause == 0) {
                /* Not for us */
                return IRQ_NONE;
        }

        if (cause == 0xffff) {
                /* Read in junk, the card has probably been removed */
                card->priv->surpriseremoved = 1;
                return IRQ_HANDLED;
        }

        if (cause & IF_CS_BIT_RX) {
                struct sk_buff *skb;
                lbs_deb_cs("rx packet\n");
                skb = if_cs_receive_data(priv);
                if (skb)
                        lbs_process_rxed_packet(priv, skb);
        }

        if (cause & IF_CS_BIT_TX) {
                lbs_deb_cs("tx done\n");
                lbs_host_to_card_done(priv);
        }

        if (cause & IF_CS_BIT_RESP) {
                unsigned long flags;
                u8 i;

                lbs_deb_cs("cmd resp\n");
                spin_lock_irqsave(&priv->driver_lock, flags);
                i = (priv->resp_idx == 0) ? 1 : 0;
                spin_unlock_irqrestore(&priv->driver_lock, flags);

                BUG_ON(priv->resp_len[i]);
                if_cs_receive_cmdres(priv, priv->resp_buf[i],
                        &priv->resp_len[i]);

                spin_lock_irqsave(&priv->driver_lock, flags);
                lbs_notify_command_response(priv, i);
                spin_unlock_irqrestore(&priv->driver_lock, flags);
        }

        if (cause & IF_CS_BIT_EVENT) {
                u16 status = if_cs_read16(priv->card, IF_CS_CARD_STATUS);
                if_cs_write16(priv->card, IF_CS_HOST_INT_CAUSE,
                        IF_CS_BIT_EVENT);
                lbs_queue_event(priv, (status & IF_CS_CARD_STATUS_MASK) >> 8);
        }

        /* Clear interrupt cause */
        if_cs_write16(card, IF_CS_CARD_INT_CAUSE, cause & IF_CS_BIT_MASK);

        lbs_deb_leave(LBS_DEB_CS);
        return IRQ_HANDLED;
}




/********************************************************************/
/* Firmware                                                         */
/********************************************************************/

/*
 * Tries to program the helper firmware.
 *
 * Return 0 on success
 */
static int if_cs_prog_helper(struct if_cs_card *card)
{
        int ret = 0;
        int sent = 0;
        u8  scratch;
        const struct firmware *fw;

        lbs_deb_enter(LBS_DEB_CS);

        scratch = if_cs_read8(card, IF_CS_SCRATCH);

        /* "If the value is 0x5a, the firmware is already
         * downloaded successfully"
         */
        if (scratch == IF_CS_SCRATCH_HELPER_OK)
                goto done;

        /* "If the value is != 00, it is invalid value of register */
        if (scratch != IF_CS_SCRATCH_BOOT_OK) {
                ret = -ENODEV;
                goto done;
        }

        /* TODO: make firmware file configurable */
        ret = request_firmware(&fw, "libertas_cs_helper.fw",
                &handle_to_dev(card->p_dev));
        if (ret) {
                lbs_pr_err("can't load helper firmware\n");
                ret = -ENODEV;
                goto done;
        }
        lbs_deb_cs("helper size %td\n", fw->size);

        /* "Set the 5 bytes of the helper image to 0" */
        /* Not needed, this contains an ARM branch instruction */

        for (;;) {
                /* "the number of bytes to send is 256" */
                int count = 256;
                int remain = fw->size - sent;

                if (remain < count)
                        count = remain;

                /* "write the number of bytes to be sent to the I/O Command
                 * write length register" */
                if_cs_write16(card, IF_CS_CMD_LEN, count);

                /* "write this to I/O Command port register as 16 bit writes */
                if (count)
                        if_cs_write16_rep(card, IF_CS_CMD,
                                &fw->data[sent],
                                count >> 1);

                /* "Assert the download over interrupt command in the Host
                 * status register" */
                if_cs_write8(card, IF_CS_HOST_STATUS, IF_CS_BIT_COMMAND);

                /* "Assert the download over interrupt command in the Card
                 * interrupt case register" */
                if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_COMMAND);

                /* "The host polls the Card Status register ... for 50 ms before
                   declaring a failure */
                ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
                        IF_CS_BIT_COMMAND);
                if (ret < 0) {
                        lbs_pr_err("can't download helper at 0x%x, ret %d\n",
                                sent, ret);
                        goto err_release;
                }

                if (count == 0)
                        break;

                sent += count;
        }

err_release:
        release_firmware(fw);
done:
        lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
        return ret;
}


static int if_cs_prog_real(struct if_cs_card *card)
{
        const struct firmware *fw;
        int ret = 0;
        int retry = 0;
        int len = 0;
        int sent;

        lbs_deb_enter(LBS_DEB_CS);

        /* TODO: make firmware file configurable */
        ret = request_firmware(&fw, "libertas_cs.fw",
                &handle_to_dev(card->p_dev));
        if (ret) {
                lbs_pr_err("can't load firmware\n");
                ret = -ENODEV;
                goto done;
        }
        lbs_deb_cs("fw size %td\n", fw->size);

        ret = if_cs_poll_while_fw_download(card, IF_CS_SQ_READ_LOW,
                IF_CS_SQ_HELPER_OK);
        if (ret < 0) {
                lbs_pr_err("helper firmware doesn't answer\n");
                goto err_release;
        }

        for (sent = 0; sent < fw->size; sent += len) {
                len = if_cs_read16(card, IF_CS_SQ_READ_LOW);
                if (len & 1) {
                        retry++;
                        lbs_pr_info("odd, need to retry this firmware block\n");
                } else {
                        retry = 0;
                }

                if (retry > 20) {
                        lbs_pr_err("could not download firmware\n");
                        ret = -ENODEV;
                        goto err_release;
                }
                if (retry) {
                        sent -= len;
                }


                if_cs_write16(card, IF_CS_CMD_LEN, len);

                if_cs_write16_rep(card, IF_CS_CMD,
                        &fw->data[sent],
                        (len+1) >> 1);
                if_cs_write8(card, IF_CS_HOST_STATUS, IF_CS_BIT_COMMAND);
                if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_COMMAND);

                ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
                        IF_CS_BIT_COMMAND);
                if (ret < 0) {
                        lbs_pr_err("can't download firmware at 0x%x\n", sent);
                        goto err_release;
                }
        }

        ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a);
        if (ret < 0)
                lbs_pr_err("firmware download failed\n");

err_release:
        release_firmware(fw);

done:
        lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
        return ret;
}



/********************************************************************/
/* Callback functions for libertas.ko                               */
/********************************************************************/

/* Send commands or data packets to the card */
static int if_cs_host_to_card(struct lbs_private *priv,
        u8 type,
        u8 *buf,
        u16 nb)
{
        int ret = -1;

        lbs_deb_enter_args(LBS_DEB_CS, "type %d, bytes %d", type, nb);

        switch (type) {
        case MVMS_DAT:
                priv->dnld_sent = DNLD_DATA_SENT;
                if_cs_send_data(priv, buf, nb);
                ret = 0;
                break;
        case MVMS_CMD:
                priv->dnld_sent = DNLD_CMD_SENT;
                ret = if_cs_send_cmd(priv, buf, nb);
                break;
        default:
                lbs_pr_err("%s: unsupported type %d\n", __func__, type);
        }

        lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
        return ret;
}


/********************************************************************/
/* Card Services                                                    */
/********************************************************************/

/*
 * After a card is removed, if_cs_release() will unregister the
 * device, and release the PCMCIA configuration.  If the device is
 * still open, this will be postponed until it is closed.
 */
static void if_cs_release(struct pcmcia_device *p_dev)
{
        struct if_cs_card *card = p_dev->priv;

        lbs_deb_enter(LBS_DEB_CS);

        free_irq(p_dev->irq.AssignedIRQ, card);
        pcmcia_disable_device(p_dev);
        if (card->iobase)
                ioport_unmap(card->iobase);

        lbs_deb_leave(LBS_DEB_CS);
}


/*
 * This creates an "instance" of the driver, allocating local data
 * structures for one device.  The device is registered with Card
 * Services.
 *
 * The dev_link structure is initialized, but we don't actually
 * configure the card at this point -- we wait until we receive a card
 * insertion event.
 */
static int if_cs_probe(struct pcmcia_device *p_dev)
{
        int ret = -ENOMEM;
        struct lbs_private *priv;
        struct if_cs_card *card;
        /* CIS parsing */
        tuple_t tuple;
        cisparse_t parse;
        cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
        cistpl_io_t *io = &cfg->io;
        u_char buf[64];

        lbs_deb_enter(LBS_DEB_CS);

        card = kzalloc(sizeof(struct if_cs_card), GFP_KERNEL);
        if (!card) {
                lbs_pr_err("error in kzalloc\n");
                goto out;
        }
        card->p_dev = p_dev;
        p_dev->priv = card;

        p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
        p_dev->irq.Handler = NULL;
        p_dev->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;

        p_dev->conf.Attributes = 0;
        p_dev->conf.IntType = INT_MEMORY_AND_IO;

        tuple.Attributes = 0;
        tuple.TupleData = buf;
        tuple.TupleDataMax = sizeof(buf);
        tuple.TupleOffset = 0;

        tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
        if ((ret = pcmcia_get_first_tuple(p_dev, &tuple)) != 0 ||
            (ret = pcmcia_get_tuple_data(p_dev, &tuple)) != 0 ||
            (ret = pcmcia_parse_tuple(&tuple, &parse)) != 0)
        {
                lbs_pr_err("error in pcmcia_get_first_tuple etc\n");
                goto out1;
        }

        p_dev->conf.ConfigIndex = cfg->index;

        /* Do we need to allocate an interrupt? */
        if (cfg->irq.IRQInfo1) {
                p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
        }

        /* IO window settings */
        if (cfg->io.nwin != 1) {
                lbs_pr_err("wrong CIS (check number of IO windows)\n");
                ret = -ENODEV;
                goto out1;
        }
        p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
        p_dev->io.BasePort1 = io->win[0].base;
        p_dev->io.NumPorts1 = io->win[0].len;

        /* This reserves IO space but doesn't actually enable it */
        ret = pcmcia_request_io(p_dev, &p_dev->io);
        if (ret) {
                lbs_pr_err("error in pcmcia_request_io\n");
                goto out1;
        }

        /*
         * Allocate an interrupt line.  Note that this does not assign
         * a handler to the interrupt, unless the 'Handler' member of
         * the irq structure is initialized.
         */
        if (p_dev->conf.Attributes & CONF_ENABLE_IRQ) {
                ret = pcmcia_request_irq(p_dev, &p_dev->irq);
                if (ret) {
                        lbs_pr_err("error in pcmcia_request_irq\n");
                        goto out1;
                }
        }

        /* Initialize io access */
        card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1);
        if (!card->iobase) {
                lbs_pr_err("error in ioport_map\n");
                ret = -EIO;
                goto out1;
        }

        /*
         * This actually configures the PCMCIA socket -- setting up
         * the I/O windows and the interrupt mapping, and putting the
         * card and host interface into "Memory and IO" mode.
         */
        ret = pcmcia_request_configuration(p_dev, &p_dev->conf);
        if (ret) {
                lbs_pr_err("error in pcmcia_request_configuration\n");
                goto out2;
        }

        /* Finally, report what we've done */
        lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n",
               p_dev->irq.AssignedIRQ, p_dev->io.BasePort1,
               p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);

        /* Check if we have a current silicon */
        if (if_cs_read8(card, IF_CS_PRODUCT_ID) < IF_CS_CF8385_B1_REV) {
                lbs_pr_err("old chips like 8385 rev B1 aren't supported\n");
                ret = -ENODEV;
                goto out2;
        }

        /* Load the firmware early, before calling into libertas.ko */
        ret = if_cs_prog_helper(card);
        if (ret == 0)
                ret = if_cs_prog_real(card);
        if (ret)
                goto out2;

        /* Make this card known to the libertas driver */
        priv = lbs_add_card(card, &p_dev->dev);
        if (!priv) {
                ret = -ENOMEM;
                goto out2;
        }

        /* Finish setting up fields in lbs_private */
        card->priv = priv;
        priv->card = card;
        priv->hw_host_to_card = if_cs_host_to_card;
        priv->fw_ready = 1;

        /* Now actually get the IRQ */
        ret = request_irq(p_dev->irq.AssignedIRQ, if_cs_interrupt,
                IRQF_SHARED, DRV_NAME, card);
        if (ret) {
                lbs_pr_err("error in request_irq\n");
                goto out3;
        }

        /* Clear any interrupt cause that happend while sending
         * firmware/initializing card */
        if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK);
        if_cs_enable_ints(card);

        /* And finally bring the card up */
        if (lbs_start_card(priv) != 0) {
                lbs_pr_err("could not activate card\n");
                goto out3;
        }

        /* The firmware for the CF card supports powersave */
        priv->ps_supported = 1;

        ret = 0;
        goto out;

out3:
        lbs_remove_card(priv);
out2:
        ioport_unmap(card->iobase);
out1:
        pcmcia_disable_device(p_dev);
out:
        lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
        return ret;
}


/*
 * This deletes a driver "instance".  The device is de-registered with
 * Card Services.  If it has been released, all local data structures
 * are freed.  Otherwise, the structures will be freed when the device
 * is released.
 */
static void if_cs_detach(struct pcmcia_device *p_dev)
{
        struct if_cs_card *card = p_dev->priv;

        lbs_deb_enter(LBS_DEB_CS);

        lbs_stop_card(card->priv);
        lbs_remove_card(card->priv);
        if_cs_disable_ints(card);
        if_cs_release(p_dev);
        kfree(card);

        lbs_deb_leave(LBS_DEB_CS);
}



/********************************************************************/
/* Module initialization                                            */
/********************************************************************/

static struct pcmcia_device_id if_cs_ids[] = {
        PCMCIA_DEVICE_MANF_CARD(0x02df, 0x8103),
        PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, if_cs_ids);


static struct pcmcia_driver lbs_driver = {
        .owner          = THIS_MODULE,
        .drv            = {
                .name   = DRV_NAME,
        },
        .probe          = if_cs_probe,
        .remove         = if_cs_detach,
        .id_table       = if_cs_ids,
};


static int __init if_cs_init(void)
{
        int ret;

        lbs_deb_enter(LBS_DEB_CS);
        ret = pcmcia_register_driver(&lbs_driver);
        lbs_deb_leave(LBS_DEB_CS);
        return ret;
}


static void __exit if_cs_exit(void)
{
        lbs_deb_enter(LBS_DEB_CS);
        pcmcia_unregister_driver(&lbs_driver);
        lbs_deb_leave(LBS_DEB_CS);
}


module_init(if_cs_init);
module_exit(if_cs_exit);