2 * This file contains functions used in USB interface module.
4 #include <linux/delay.h>
5 #include <linux/moduleparam.h>
6 #include <linux/firmware.h>
7 #include <linux/netdevice.h>
14 #define DRV_NAME "usb8xxx"
24 #define lbs_deb_usb2(...) do { if (INSANEDEBUG) lbs_deb_usbd(__VA_ARGS__); } while (0)
26 #define MESSAGE_HEADER_LEN 4
28 static char *lbs_fw_name
= "usb8388.bin";
29 module_param_named(fw_name
, lbs_fw_name
, charp
, 0644);
31 static struct usb_device_id if_usb_table
[] = {
32 /* Enter the device signature inside */
33 { USB_DEVICE(0x1286, 0x2001) },
34 { USB_DEVICE(0x05a3, 0x8388) },
35 {} /* Terminating entry */
38 MODULE_DEVICE_TABLE(usb
, if_usb_table
);
40 static void if_usb_receive(struct urb
*urb
);
41 static void if_usb_receive_fwload(struct urb
*urb
);
42 static int __if_usb_prog_firmware(struct if_usb_card
*cardp
,
43 const char *fwname
, int cmd
);
44 static int if_usb_prog_firmware(struct if_usb_card
*cardp
,
45 const char *fwname
, int cmd
);
46 static int if_usb_host_to_card(struct lbs_private
*priv
, uint8_t type
,
47 uint8_t *payload
, uint16_t nb
);
48 static int usb_tx_block(struct if_usb_card
*cardp
, uint8_t *payload
,
50 static void if_usb_free(struct if_usb_card
*cardp
);
51 static int if_usb_submit_rx_urb(struct if_usb_card
*cardp
);
52 static int if_usb_reset_device(struct if_usb_card
*cardp
);
57 * Set function to write firmware to device's persistent memory
59 static ssize_t
if_usb_firmware_set(struct device
*dev
,
60 struct device_attribute
*attr
, const char *buf
, size_t count
)
62 struct lbs_private
*priv
= netdev_priv(to_net_dev(dev
));
63 struct if_usb_card
*cardp
= priv
->card
;
64 char fwname
[FIRMWARE_NAME_MAX
];
67 sscanf(buf
, "%29s", fwname
); /* FIRMWARE_NAME_MAX - 1 = 29 */
68 ret
= if_usb_prog_firmware(cardp
, fwname
, BOOT_CMD_UPDATE_FW
);
76 * lbs_flash_fw attribute to be exported per ethX interface through sysfs
77 * (/sys/class/net/ethX/lbs_flash_fw). Use this like so to write firmware to
78 * the device's persistent memory:
79 * echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_fw
81 static DEVICE_ATTR(lbs_flash_fw
, 0200, NULL
, if_usb_firmware_set
);
84 * Set function to write firmware to device's persistent memory
86 static ssize_t
if_usb_boot2_set(struct device
*dev
,
87 struct device_attribute
*attr
, const char *buf
, size_t count
)
89 struct lbs_private
*priv
= netdev_priv(to_net_dev(dev
));
90 struct if_usb_card
*cardp
= priv
->card
;
91 char fwname
[FIRMWARE_NAME_MAX
];
94 sscanf(buf
, "%29s", fwname
); /* FIRMWARE_NAME_MAX - 1 = 29 */
95 ret
= if_usb_prog_firmware(cardp
, fwname
, BOOT_CMD_UPDATE_BOOT2
);
103 * lbs_flash_boot2 attribute to be exported per ethX interface through sysfs
104 * (/sys/class/net/ethX/lbs_flash_boot2). Use this like so to write firmware
105 * to the device's persistent memory:
106 * echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_boot2
108 static DEVICE_ATTR(lbs_flash_boot2
, 0200, NULL
, if_usb_boot2_set
);
111 * @brief call back function to handle the status of the URB
112 * @param urb pointer to urb structure
115 static void if_usb_write_bulk_callback(struct urb
*urb
)
117 struct if_usb_card
*cardp
= (struct if_usb_card
*) urb
->context
;
119 /* handle the transmission complete validations */
121 if (urb
->status
== 0) {
122 struct lbs_private
*priv
= cardp
->priv
;
124 lbs_deb_usb2(&urb
->dev
->dev
, "URB status is successful\n");
125 lbs_deb_usb2(&urb
->dev
->dev
, "Actual length transmitted %d\n",
128 /* Boot commands such as UPDATE_FW and UPDATE_BOOT2 are not
129 * passed up to the lbs level.
131 if (priv
&& priv
->dnld_sent
!= DNLD_BOOTCMD_SENT
)
132 lbs_host_to_card_done(priv
);
134 /* print the failure status number for debug */
135 lbs_pr_info("URB in failure status: %d\n", urb
->status
);
142 * @brief free tx/rx urb, skb and rx buffer
143 * @param cardp pointer if_usb_card
146 static void if_usb_free(struct if_usb_card
*cardp
)
148 lbs_deb_enter(LBS_DEB_USB
);
150 /* Unlink tx & rx urb */
151 usb_kill_urb(cardp
->tx_urb
);
152 usb_kill_urb(cardp
->rx_urb
);
154 usb_free_urb(cardp
->tx_urb
);
155 cardp
->tx_urb
= NULL
;
157 usb_free_urb(cardp
->rx_urb
);
158 cardp
->rx_urb
= NULL
;
160 kfree(cardp
->ep_out_buf
);
161 cardp
->ep_out_buf
= NULL
;
163 lbs_deb_leave(LBS_DEB_USB
);
166 static void if_usb_setup_firmware(struct lbs_private
*priv
)
168 struct if_usb_card
*cardp
= priv
->card
;
169 struct cmd_ds_set_boot2_ver b2_cmd
;
170 struct cmd_ds_802_11_fw_wake_method wake_method
;
172 b2_cmd
.hdr
.size
= cpu_to_le16(sizeof(b2_cmd
));
174 b2_cmd
.version
= cardp
->boot2_version
;
176 if (lbs_cmd_with_response(priv
, CMD_SET_BOOT2_VER
, &b2_cmd
))
177 lbs_deb_usb("Setting boot2 version failed\n");
179 priv
->wol_gpio
= 2; /* Wake via GPIO2... */
180 priv
->wol_gap
= 20; /* ... after 20ms */
181 lbs_host_sleep_cfg(priv
, EHS_WAKE_ON_UNICAST_DATA
,
182 (struct wol_config
*) NULL
);
184 wake_method
.hdr
.size
= cpu_to_le16(sizeof(wake_method
));
185 wake_method
.action
= cpu_to_le16(CMD_ACT_GET
);
186 if (lbs_cmd_with_response(priv
, CMD_802_11_FW_WAKE_METHOD
, &wake_method
)) {
187 lbs_pr_info("Firmware does not seem to support PS mode\n");
189 if (le16_to_cpu(wake_method
.method
) == CMD_WAKE_METHOD_COMMAND_INT
) {
190 lbs_deb_usb("Firmware seems to support PS with wake-via-command\n");
191 priv
->ps_supported
= 1;
193 /* The versions which boot up this way don't seem to
194 work even if we set it to the command interrupt */
195 lbs_pr_info("Firmware doesn't wake via command interrupt; disabling PS mode\n");
200 static void if_usb_fw_timeo(unsigned long priv
)
202 struct if_usb_card
*cardp
= (void *)priv
;
204 if (cardp
->fwdnldover
) {
205 lbs_deb_usb("Download complete, no event. Assuming success\n");
207 lbs_pr_err("Download timed out\n");
208 cardp
->surprise_removed
= 1;
210 wake_up(&cardp
->fw_wq
);
214 static void if_usb_reset_olpc_card(struct lbs_private
*priv
)
216 printk(KERN_CRIT
"Resetting OLPC wireless via EC...\n");
217 olpc_ec_cmd(0x25, NULL
, 0, NULL
, 0);
222 * @brief sets the configuration values
223 * @param ifnum interface number
224 * @param id pointer to usb_device_id
225 * @return 0 on success, error code on failure
227 static int if_usb_probe(struct usb_interface
*intf
,
228 const struct usb_device_id
*id
)
230 struct usb_device
*udev
;
231 struct usb_host_interface
*iface_desc
;
232 struct usb_endpoint_descriptor
*endpoint
;
233 struct lbs_private
*priv
;
234 struct if_usb_card
*cardp
;
237 udev
= interface_to_usbdev(intf
);
239 cardp
= kzalloc(sizeof(struct if_usb_card
), GFP_KERNEL
);
241 lbs_pr_err("Out of memory allocating private data.\n");
245 setup_timer(&cardp
->fw_timeout
, if_usb_fw_timeo
, (unsigned long)cardp
);
246 init_waitqueue_head(&cardp
->fw_wq
);
249 iface_desc
= intf
->cur_altsetting
;
251 lbs_deb_usbd(&udev
->dev
, "bcdUSB = 0x%X bDeviceClass = 0x%X"
252 " bDeviceSubClass = 0x%X, bDeviceProtocol = 0x%X\n",
253 le16_to_cpu(udev
->descriptor
.bcdUSB
),
254 udev
->descriptor
.bDeviceClass
,
255 udev
->descriptor
.bDeviceSubClass
,
256 udev
->descriptor
.bDeviceProtocol
);
258 for (i
= 0; i
< iface_desc
->desc
.bNumEndpoints
; ++i
) {
259 endpoint
= &iface_desc
->endpoint
[i
].desc
;
260 if (usb_endpoint_is_bulk_in(endpoint
)) {
261 cardp
->ep_in_size
= le16_to_cpu(endpoint
->wMaxPacketSize
);
262 cardp
->ep_in
= usb_endpoint_num(endpoint
);
264 lbs_deb_usbd(&udev
->dev
, "in_endpoint = %d\n", cardp
->ep_in
);
265 lbs_deb_usbd(&udev
->dev
, "Bulk in size is %d\n", cardp
->ep_in_size
);
267 } else if (usb_endpoint_is_bulk_out(endpoint
)) {
268 cardp
->ep_out_size
= le16_to_cpu(endpoint
->wMaxPacketSize
);
269 cardp
->ep_out
= usb_endpoint_num(endpoint
);
271 lbs_deb_usbd(&udev
->dev
, "out_endpoint = %d\n", cardp
->ep_out
);
272 lbs_deb_usbd(&udev
->dev
, "Bulk out size is %d\n", cardp
->ep_out_size
);
275 if (!cardp
->ep_out_size
|| !cardp
->ep_in_size
) {
276 lbs_deb_usbd(&udev
->dev
, "Endpoints not found\n");
279 if (!(cardp
->rx_urb
= usb_alloc_urb(0, GFP_KERNEL
))) {
280 lbs_deb_usbd(&udev
->dev
, "Rx URB allocation failed\n");
283 if (!(cardp
->tx_urb
= usb_alloc_urb(0, GFP_KERNEL
))) {
284 lbs_deb_usbd(&udev
->dev
, "Tx URB allocation failed\n");
287 cardp
->ep_out_buf
= kmalloc(MRVDRV_ETH_TX_PACKET_BUFFER_SIZE
, GFP_KERNEL
);
288 if (!cardp
->ep_out_buf
) {
289 lbs_deb_usbd(&udev
->dev
, "Could not allocate buffer\n");
293 /* Upload firmware */
294 if (__if_usb_prog_firmware(cardp
, lbs_fw_name
, BOOT_CMD_FW_BY_USB
)) {
295 lbs_deb_usbd(&udev
->dev
, "FW upload failed\n");
296 goto err_prog_firmware
;
299 if (!(priv
= lbs_add_card(cardp
, &udev
->dev
)))
300 goto err_prog_firmware
;
303 cardp
->priv
->fw_ready
= 1;
305 priv
->hw_host_to_card
= if_usb_host_to_card
;
307 if (machine_is_olpc())
308 priv
->reset_card
= if_usb_reset_olpc_card
;
311 cardp
->boot2_version
= udev
->descriptor
.bcdDevice
;
313 if_usb_submit_rx_urb(cardp
);
315 if (lbs_start_card(priv
))
318 if_usb_setup_firmware(priv
);
321 usb_set_intfdata(intf
, cardp
);
323 if (device_create_file(&priv
->dev
->dev
, &dev_attr_lbs_flash_fw
))
324 lbs_pr_err("cannot register lbs_flash_fw attribute\n");
326 if (device_create_file(&priv
->dev
->dev
, &dev_attr_lbs_flash_boot2
))
327 lbs_pr_err("cannot register lbs_flash_boot2 attribute\n");
332 lbs_remove_card(priv
);
334 if_usb_reset_device(cardp
);
343 * @brief free resource and cleanup
344 * @param intf USB interface structure
347 static void if_usb_disconnect(struct usb_interface
*intf
)
349 struct if_usb_card
*cardp
= usb_get_intfdata(intf
);
350 struct lbs_private
*priv
= (struct lbs_private
*) cardp
->priv
;
352 lbs_deb_enter(LBS_DEB_MAIN
);
354 device_remove_file(&priv
->dev
->dev
, &dev_attr_lbs_flash_boot2
);
355 device_remove_file(&priv
->dev
->dev
, &dev_attr_lbs_flash_fw
);
357 cardp
->surprise_removed
= 1;
360 priv
->surpriseremoved
= 1;
362 lbs_remove_card(priv
);
365 /* Unlink and free urb */
368 usb_set_intfdata(intf
, NULL
);
369 usb_put_dev(interface_to_usbdev(intf
));
371 lbs_deb_leave(LBS_DEB_MAIN
);
375 * @brief This function download FW
376 * @param priv pointer to struct lbs_private
379 static int if_usb_send_fw_pkt(struct if_usb_card
*cardp
)
381 struct fwdata
*fwdata
= cardp
->ep_out_buf
;
382 const uint8_t *firmware
= cardp
->fw
->data
;
384 /* If we got a CRC failure on the last block, back
386 if (!cardp
->CRC_OK
) {
387 cardp
->totalbytes
= cardp
->fwlastblksent
;
391 lbs_deb_usb2(&cardp
->udev
->dev
, "totalbytes = %d\n",
394 /* struct fwdata (which we sent to the card) has an
395 extra __le32 field in between the header and the data,
396 which is not in the struct fwheader in the actual
397 firmware binary. Insert the seqnum in the middle... */
398 memcpy(&fwdata
->hdr
, &firmware
[cardp
->totalbytes
],
399 sizeof(struct fwheader
));
401 cardp
->fwlastblksent
= cardp
->totalbytes
;
402 cardp
->totalbytes
+= sizeof(struct fwheader
);
404 memcpy(fwdata
->data
, &firmware
[cardp
->totalbytes
],
405 le32_to_cpu(fwdata
->hdr
.datalength
));
407 lbs_deb_usb2(&cardp
->udev
->dev
, "Data length = %d\n",
408 le32_to_cpu(fwdata
->hdr
.datalength
));
410 fwdata
->seqnum
= cpu_to_le32(++cardp
->fwseqnum
);
411 cardp
->totalbytes
+= le32_to_cpu(fwdata
->hdr
.datalength
);
413 usb_tx_block(cardp
, cardp
->ep_out_buf
, sizeof(struct fwdata
) +
414 le32_to_cpu(fwdata
->hdr
.datalength
));
416 if (fwdata
->hdr
.dnldcmd
== cpu_to_le32(FW_HAS_DATA_TO_RECV
)) {
417 lbs_deb_usb2(&cardp
->udev
->dev
, "There are data to follow\n");
418 lbs_deb_usb2(&cardp
->udev
->dev
, "seqnum = %d totalbytes = %d\n",
419 cardp
->fwseqnum
, cardp
->totalbytes
);
420 } else if (fwdata
->hdr
.dnldcmd
== cpu_to_le32(FW_HAS_LAST_BLOCK
)) {
421 lbs_deb_usb2(&cardp
->udev
->dev
, "Host has finished FW downloading\n");
422 lbs_deb_usb2(&cardp
->udev
->dev
, "Donwloading FW JUMP BLOCK\n");
424 cardp
->fwfinalblk
= 1;
427 lbs_deb_usb2(&cardp
->udev
->dev
, "Firmware download done; size %d\n",
433 static int if_usb_reset_device(struct if_usb_card
*cardp
)
435 struct cmd_ds_command
*cmd
= cardp
->ep_out_buf
+ 4;
438 lbs_deb_enter(LBS_DEB_USB
);
440 *(__le32
*)cardp
->ep_out_buf
= cpu_to_le32(CMD_TYPE_REQUEST
);
442 cmd
->command
= cpu_to_le16(CMD_802_11_RESET
);
443 cmd
->size
= cpu_to_le16(sizeof(struct cmd_header
));
444 cmd
->result
= cpu_to_le16(0);
445 cmd
->seqnum
= cpu_to_le16(0x5a5a);
446 usb_tx_block(cardp
, cardp
->ep_out_buf
, 4 + sizeof(struct cmd_header
));
449 ret
= usb_reset_device(cardp
->udev
);
453 if (ret
&& machine_is_olpc())
454 if_usb_reset_olpc_card(NULL
);
457 lbs_deb_leave_args(LBS_DEB_USB
, "ret %d", ret
);
463 * @brief This function transfer the data to the device.
464 * @param priv pointer to struct lbs_private
465 * @param payload pointer to payload data
466 * @param nb data length
469 static int usb_tx_block(struct if_usb_card
*cardp
, uint8_t *payload
, uint16_t nb
)
473 /* check if device is removed */
474 if (cardp
->surprise_removed
) {
475 lbs_deb_usbd(&cardp
->udev
->dev
, "Device removed\n");
479 usb_fill_bulk_urb(cardp
->tx_urb
, cardp
->udev
,
480 usb_sndbulkpipe(cardp
->udev
,
482 payload
, nb
, if_usb_write_bulk_callback
, cardp
);
484 cardp
->tx_urb
->transfer_flags
|= URB_ZERO_PACKET
;
486 if ((ret
= usb_submit_urb(cardp
->tx_urb
, GFP_ATOMIC
))) {
487 lbs_deb_usbd(&cardp
->udev
->dev
, "usb_submit_urb failed: %d\n", ret
);
490 lbs_deb_usb2(&cardp
->udev
->dev
, "usb_submit_urb success\n");
498 static int __if_usb_submit_rx_urb(struct if_usb_card
*cardp
,
499 void (*callbackfn
)(struct urb
*urb
))
504 if (!(skb
= dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE
))) {
505 lbs_pr_err("No free skb\n");
511 /* Fill the receive configuration URB and initialise the Rx call back */
512 usb_fill_bulk_urb(cardp
->rx_urb
, cardp
->udev
,
513 usb_rcvbulkpipe(cardp
->udev
, cardp
->ep_in
),
514 (void *) (skb
->tail
+ (size_t) IPFIELD_ALIGN_OFFSET
),
515 MRVDRV_ETH_RX_PACKET_BUFFER_SIZE
, callbackfn
,
518 cardp
->rx_urb
->transfer_flags
|= URB_ZERO_PACKET
;
520 lbs_deb_usb2(&cardp
->udev
->dev
, "Pointer for rx_urb %p\n", cardp
->rx_urb
);
521 if ((ret
= usb_submit_urb(cardp
->rx_urb
, GFP_ATOMIC
))) {
522 lbs_deb_usbd(&cardp
->udev
->dev
, "Submit Rx URB failed: %d\n", ret
);
524 cardp
->rx_skb
= NULL
;
527 lbs_deb_usb2(&cardp
->udev
->dev
, "Submit Rx URB success\n");
535 static int if_usb_submit_rx_urb_fwload(struct if_usb_card
*cardp
)
537 return __if_usb_submit_rx_urb(cardp
, &if_usb_receive_fwload
);
540 static int if_usb_submit_rx_urb(struct if_usb_card
*cardp
)
542 return __if_usb_submit_rx_urb(cardp
, &if_usb_receive
);
545 static void if_usb_receive_fwload(struct urb
*urb
)
547 struct if_usb_card
*cardp
= urb
->context
;
548 struct sk_buff
*skb
= cardp
->rx_skb
;
549 struct fwsyncheader
*syncfwheader
;
550 struct bootcmdresp bootcmdresp
;
553 lbs_deb_usbd(&cardp
->udev
->dev
,
554 "URB status is failed during fw load\n");
559 if (cardp
->fwdnldover
) {
560 __le32
*tmp
= (__le32
*)(skb
->data
+ IPFIELD_ALIGN_OFFSET
);
562 if (tmp
[0] == cpu_to_le32(CMD_TYPE_INDICATION
) &&
563 tmp
[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY
)) {
564 lbs_pr_info("Firmware ready event received\n");
565 wake_up(&cardp
->fw_wq
);
567 lbs_deb_usb("Waiting for confirmation; got %x %x\n",
568 le32_to_cpu(tmp
[0]), le32_to_cpu(tmp
[1]));
569 if_usb_submit_rx_urb_fwload(cardp
);
574 if (cardp
->bootcmdresp
<= 0) {
575 memcpy (&bootcmdresp
, skb
->data
+ IPFIELD_ALIGN_OFFSET
,
576 sizeof(bootcmdresp
));
578 if (le16_to_cpu(cardp
->udev
->descriptor
.bcdDevice
) < 0x3106) {
580 if_usb_submit_rx_urb_fwload(cardp
);
581 cardp
->bootcmdresp
= BOOT_CMD_RESP_OK
;
582 lbs_deb_usbd(&cardp
->udev
->dev
,
583 "Received valid boot command response\n");
586 if (bootcmdresp
.magic
!= cpu_to_le32(BOOT_CMD_MAGIC_NUMBER
)) {
587 if (bootcmdresp
.magic
== cpu_to_le32(CMD_TYPE_REQUEST
) ||
588 bootcmdresp
.magic
== cpu_to_le32(CMD_TYPE_DATA
) ||
589 bootcmdresp
.magic
== cpu_to_le32(CMD_TYPE_INDICATION
)) {
590 if (!cardp
->bootcmdresp
)
591 lbs_pr_info("Firmware already seems alive; resetting\n");
592 cardp
->bootcmdresp
= -1;
594 lbs_pr_info("boot cmd response wrong magic number (0x%x)\n",
595 le32_to_cpu(bootcmdresp
.magic
));
597 } else if ((bootcmdresp
.cmd
!= BOOT_CMD_FW_BY_USB
) &&
598 (bootcmdresp
.cmd
!= BOOT_CMD_UPDATE_FW
) &&
599 (bootcmdresp
.cmd
!= BOOT_CMD_UPDATE_BOOT2
)) {
600 lbs_pr_info("boot cmd response cmd_tag error (%d)\n",
602 } else if (bootcmdresp
.result
!= BOOT_CMD_RESP_OK
) {
603 lbs_pr_info("boot cmd response result error (%d)\n",
606 cardp
->bootcmdresp
= 1;
607 lbs_deb_usbd(&cardp
->udev
->dev
,
608 "Received valid boot command response\n");
611 if_usb_submit_rx_urb_fwload(cardp
);
615 syncfwheader
= kmalloc(sizeof(struct fwsyncheader
), GFP_ATOMIC
);
617 lbs_deb_usbd(&cardp
->udev
->dev
, "Failure to allocate syncfwheader\n");
622 memcpy(syncfwheader
, skb
->data
+ IPFIELD_ALIGN_OFFSET
,
623 sizeof(struct fwsyncheader
));
625 if (!syncfwheader
->cmd
) {
626 lbs_deb_usb2(&cardp
->udev
->dev
, "FW received Blk with correct CRC\n");
627 lbs_deb_usb2(&cardp
->udev
->dev
, "FW received Blk seqnum = %d\n",
628 le32_to_cpu(syncfwheader
->seqnum
));
631 lbs_deb_usbd(&cardp
->udev
->dev
, "FW received Blk with CRC error\n");
637 /* Give device 5s to either write firmware to its RAM or eeprom */
638 mod_timer(&cardp
->fw_timeout
, jiffies
+ (HZ
*5));
640 if (cardp
->fwfinalblk
) {
641 cardp
->fwdnldover
= 1;
645 if_usb_send_fw_pkt(cardp
);
648 if_usb_submit_rx_urb_fwload(cardp
);
655 #define MRVDRV_MIN_PKT_LEN 30
657 static inline void process_cmdtypedata(int recvlength
, struct sk_buff
*skb
,
658 struct if_usb_card
*cardp
,
659 struct lbs_private
*priv
)
661 if (recvlength
> MRVDRV_ETH_RX_PACKET_BUFFER_SIZE
+ MESSAGE_HEADER_LEN
662 || recvlength
< MRVDRV_MIN_PKT_LEN
) {
663 lbs_deb_usbd(&cardp
->udev
->dev
, "Packet length is Invalid\n");
668 skb_reserve(skb
, IPFIELD_ALIGN_OFFSET
);
669 skb_put(skb
, recvlength
);
670 skb_pull(skb
, MESSAGE_HEADER_LEN
);
672 lbs_process_rxed_packet(priv
, skb
);
675 static inline void process_cmdrequest(int recvlength
, uint8_t *recvbuff
,
677 struct if_usb_card
*cardp
,
678 struct lbs_private
*priv
)
682 if (recvlength
> LBS_CMD_BUFFER_SIZE
) {
683 lbs_deb_usbd(&cardp
->udev
->dev
,
684 "The receive buffer is too large\n");
692 spin_lock(&priv
->driver_lock
);
694 i
= (priv
->resp_idx
== 0) ? 1 : 0;
695 BUG_ON(priv
->resp_len
[i
]);
696 priv
->resp_len
[i
] = (recvlength
- MESSAGE_HEADER_LEN
);
697 memcpy(priv
->resp_buf
[i
], recvbuff
+ MESSAGE_HEADER_LEN
,
700 lbs_notify_command_response(priv
, i
);
702 spin_unlock(&priv
->driver_lock
);
704 lbs_deb_usbd(&cardp
->udev
->dev
,
705 "Wake up main thread to handle cmd response\n");
709 * @brief This function reads of the packet into the upload buff,
710 * wake up the main thread and initialise the Rx callack.
712 * @param urb pointer to struct urb
715 static void if_usb_receive(struct urb
*urb
)
717 struct if_usb_card
*cardp
= urb
->context
;
718 struct sk_buff
*skb
= cardp
->rx_skb
;
719 struct lbs_private
*priv
= cardp
->priv
;
720 int recvlength
= urb
->actual_length
;
721 uint8_t *recvbuff
= NULL
;
722 uint32_t recvtype
= 0;
723 __le32
*pkt
= (__le32
*)(skb
->data
+ IPFIELD_ALIGN_OFFSET
);
726 lbs_deb_enter(LBS_DEB_USB
);
730 lbs_deb_usbd(&cardp
->udev
->dev
, "RX URB failed: %d\n",
736 recvbuff
= skb
->data
+ IPFIELD_ALIGN_OFFSET
;
737 recvtype
= le32_to_cpu(pkt
[0]);
738 lbs_deb_usbd(&cardp
->udev
->dev
,
739 "Recv length = 0x%x, Recv type = 0x%X\n",
740 recvlength
, recvtype
);
741 } else if (urb
->status
) {
748 process_cmdtypedata(recvlength
, skb
, cardp
, priv
);
751 case CMD_TYPE_REQUEST
:
752 process_cmdrequest(recvlength
, recvbuff
, skb
, cardp
, priv
);
755 case CMD_TYPE_INDICATION
:
757 event
= le32_to_cpu(pkt
[1]);
758 lbs_deb_usbd(&cardp
->udev
->dev
, "**EVENT** 0x%X\n", event
);
761 /* Icky undocumented magic special case */
762 if (event
& 0xffff0000) {
763 u32 trycount
= (event
& 0xffff0000) >> 16;
765 lbs_send_tx_feedback(priv
, trycount
);
767 lbs_queue_event(priv
, event
& 0xFF);
771 lbs_deb_usbd(&cardp
->udev
->dev
, "Unknown command type 0x%X\n",
778 if_usb_submit_rx_urb(cardp
);
780 lbs_deb_leave(LBS_DEB_USB
);
784 * @brief This function downloads data to FW
785 * @param priv pointer to struct lbs_private structure
786 * @param type type of data
787 * @param buf pointer to data buffer
788 * @param len number of bytes
791 static int if_usb_host_to_card(struct lbs_private
*priv
, uint8_t type
,
792 uint8_t *payload
, uint16_t nb
)
794 struct if_usb_card
*cardp
= priv
->card
;
796 lbs_deb_usbd(&cardp
->udev
->dev
,"*** type = %u\n", type
);
797 lbs_deb_usbd(&cardp
->udev
->dev
,"size after = %d\n", nb
);
799 if (type
== MVMS_CMD
) {
800 *(__le32
*)cardp
->ep_out_buf
= cpu_to_le32(CMD_TYPE_REQUEST
);
801 priv
->dnld_sent
= DNLD_CMD_SENT
;
803 *(__le32
*)cardp
->ep_out_buf
= cpu_to_le32(CMD_TYPE_DATA
);
804 priv
->dnld_sent
= DNLD_DATA_SENT
;
807 memcpy((cardp
->ep_out_buf
+ MESSAGE_HEADER_LEN
), payload
, nb
);
809 return usb_tx_block(cardp
, cardp
->ep_out_buf
, nb
+ MESSAGE_HEADER_LEN
);
813 * @brief This function issues Boot command to the Boot2 code
814 * @param ivalue 1:Boot from FW by USB-Download
815 * 2:Boot from FW in EEPROM
818 static int if_usb_issue_boot_command(struct if_usb_card
*cardp
, int ivalue
)
820 struct bootcmd
*bootcmd
= cardp
->ep_out_buf
;
822 /* Prepare command */
823 bootcmd
->magic
= cpu_to_le32(BOOT_CMD_MAGIC_NUMBER
);
824 bootcmd
->cmd
= ivalue
;
825 memset(bootcmd
->pad
, 0, sizeof(bootcmd
->pad
));
828 usb_tx_block(cardp
, cardp
->ep_out_buf
, sizeof(*bootcmd
));
835 * @brief This function checks the validity of Boot2/FW image.
837 * @param data pointer to image
841 static int check_fwfile_format(const uint8_t *data
, uint32_t totlen
)
843 uint32_t bincmd
, exit
;
844 uint32_t blksize
, offset
, len
;
851 struct fwheader
*fwh
= (void *)data
;
853 bincmd
= le32_to_cpu(fwh
->dnldcmd
);
854 blksize
= le32_to_cpu(fwh
->datalength
);
856 case FW_HAS_DATA_TO_RECV
:
857 offset
= sizeof(struct fwheader
) + blksize
;
863 case FW_HAS_LAST_BLOCK
:
874 lbs_pr_err("firmware file format check FAIL\n");
876 lbs_deb_fw("firmware file format check PASS\n");
883 * @brief This function programs the firmware subject to cmd
885 * @param cardp the if_usb_card descriptor
886 * fwname firmware or boot2 image file name
887 * cmd either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW,
888 * or BOOT_CMD_UPDATE_BOOT2.
889 * @return 0 or error code
891 static int if_usb_prog_firmware(struct if_usb_card
*cardp
,
892 const char *fwname
, int cmd
)
894 struct lbs_private
*priv
= cardp
->priv
;
895 unsigned long flags
, caps
;
898 caps
= priv
->fwcapinfo
;
899 if (((cmd
== BOOT_CMD_UPDATE_FW
) && !(caps
& FW_CAPINFO_FIRMWARE_UPGRADE
)) ||
900 ((cmd
== BOOT_CMD_UPDATE_BOOT2
) && !(caps
& FW_CAPINFO_BOOT2_UPGRADE
)))
903 /* Ensure main thread is idle. */
904 spin_lock_irqsave(&priv
->driver_lock
, flags
);
905 while (priv
->cur_cmd
!= NULL
|| priv
->dnld_sent
!= DNLD_RES_RECEIVED
) {
906 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
907 if (wait_event_interruptible(priv
->waitq
,
908 (priv
->cur_cmd
== NULL
&&
909 priv
->dnld_sent
== DNLD_RES_RECEIVED
))) {
912 spin_lock_irqsave(&priv
->driver_lock
, flags
);
914 priv
->dnld_sent
= DNLD_BOOTCMD_SENT
;
915 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
917 ret
= __if_usb_prog_firmware(cardp
, fwname
, cmd
);
919 spin_lock_irqsave(&priv
->driver_lock
, flags
);
920 priv
->dnld_sent
= DNLD_RES_RECEIVED
;
921 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
923 wake_up_interruptible(&priv
->waitq
);
928 static int __if_usb_prog_firmware(struct if_usb_card
*cardp
,
929 const char *fwname
, int cmd
)
932 static int reset_count
= 10;
935 lbs_deb_enter(LBS_DEB_USB
);
937 ret
= request_firmware(&cardp
->fw
, fwname
, &cardp
->udev
->dev
);
939 lbs_pr_err("request_firmware() failed with %#x\n", ret
);
940 lbs_pr_err("firmware %s not found\n", fwname
);
944 if (check_fwfile_format(cardp
->fw
->data
, cardp
->fw
->size
)) {
949 /* Cancel any pending usb business */
950 usb_kill_urb(cardp
->rx_urb
);
951 usb_kill_urb(cardp
->tx_urb
);
953 cardp
->fwlastblksent
= 0;
954 cardp
->fwdnldover
= 0;
955 cardp
->totalbytes
= 0;
956 cardp
->fwfinalblk
= 0;
957 cardp
->bootcmdresp
= 0;
960 if (if_usb_submit_rx_urb_fwload(cardp
) < 0) {
961 lbs_deb_usbd(&cardp
->udev
->dev
, "URB submission is failed\n");
966 cardp
->bootcmdresp
= 0;
970 if_usb_issue_boot_command(cardp
, cmd
);
971 /* wait for command response */
974 msleep_interruptible(100);
975 } while (cardp
->bootcmdresp
== 0 && j
< 10);
976 } while (cardp
->bootcmdresp
== 0 && i
< 5);
978 if (cardp
->bootcmdresp
== BOOT_CMD_RESP_NOT_SUPPORTED
) {
979 /* Return to normal operation */
981 usb_kill_urb(cardp
->rx_urb
);
982 usb_kill_urb(cardp
->tx_urb
);
983 if (if_usb_submit_rx_urb(cardp
) < 0)
986 } else if (cardp
->bootcmdresp
<= 0) {
987 if (--reset_count
>= 0) {
988 if_usb_reset_device(cardp
);
997 cardp
->totalbytes
= 0;
998 cardp
->fwlastblksent
= 0;
1000 cardp
->fwdnldover
= 0;
1001 cardp
->fwseqnum
= -1;
1002 cardp
->totalbytes
= 0;
1003 cardp
->fwfinalblk
= 0;
1005 /* Send the first firmware packet... */
1006 if_usb_send_fw_pkt(cardp
);
1008 /* ... and wait for the process to complete */
1009 wait_event_interruptible(cardp
->fw_wq
, cardp
->surprise_removed
|| cardp
->fwdnldover
);
1011 del_timer_sync(&cardp
->fw_timeout
);
1012 usb_kill_urb(cardp
->rx_urb
);
1014 if (!cardp
->fwdnldover
) {
1015 lbs_pr_info("failed to load fw, resetting device!\n");
1016 if (--reset_count
>= 0) {
1017 if_usb_reset_device(cardp
);
1021 lbs_pr_info("FW download failure, time = %d ms\n", i
* 100);
1027 release_firmware(cardp
->fw
);
1031 lbs_deb_leave_args(LBS_DEB_USB
, "ret %d", ret
);
1037 static int if_usb_suspend(struct usb_interface
*intf
, pm_message_t message
)
1039 struct if_usb_card
*cardp
= usb_get_intfdata(intf
);
1040 struct lbs_private
*priv
= cardp
->priv
;
1043 lbs_deb_enter(LBS_DEB_USB
);
1045 if (priv
->psstate
!= PS_STATE_FULL_POWER
)
1048 ret
= lbs_suspend(priv
);
1052 /* Unlink tx & rx urb */
1053 usb_kill_urb(cardp
->tx_urb
);
1054 usb_kill_urb(cardp
->rx_urb
);
1057 lbs_deb_leave(LBS_DEB_USB
);
1061 static int if_usb_resume(struct usb_interface
*intf
)
1063 struct if_usb_card
*cardp
= usb_get_intfdata(intf
);
1064 struct lbs_private
*priv
= cardp
->priv
;
1066 lbs_deb_enter(LBS_DEB_USB
);
1068 if_usb_submit_rx_urb(cardp
);
1072 lbs_deb_leave(LBS_DEB_USB
);
1076 #define if_usb_suspend NULL
1077 #define if_usb_resume NULL
1080 static struct usb_driver if_usb_driver
= {
1082 .probe
= if_usb_probe
,
1083 .disconnect
= if_usb_disconnect
,
1084 .id_table
= if_usb_table
,
1085 .suspend
= if_usb_suspend
,
1086 .resume
= if_usb_resume
,
1087 .reset_resume
= if_usb_resume
,
1090 static int __init
if_usb_init_module(void)
1094 lbs_deb_enter(LBS_DEB_MAIN
);
1096 ret
= usb_register(&if_usb_driver
);
1098 lbs_deb_leave_args(LBS_DEB_MAIN
, "ret %d", ret
);
1102 static void __exit
if_usb_exit_module(void)
1104 lbs_deb_enter(LBS_DEB_MAIN
);
1106 usb_deregister(&if_usb_driver
);
1108 lbs_deb_leave(LBS_DEB_MAIN
);
1111 module_init(if_usb_init_module
);
1112 module_exit(if_usb_exit_module
);
1114 MODULE_DESCRIPTION("8388 USB WLAN Driver");
1115 MODULE_AUTHOR("Marvell International Ltd. and Red Hat, Inc.");
1116 MODULE_LICENSE("GPL");