2 * arch/arm/mach-ep93xx/vision_ep9307.c
3 * Vision Engraving Systems EP9307 SoM support.
5 * Copyright (C) 2008-2011 Vision Engraving Systems
6 * H Hartley Sweeten <hsweeten@visionengravers.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or (at
11 * your option) any later version.
14 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
16 #include <linux/kernel.h>
17 #include <linux/init.h>
18 #include <linux/platform_device.h>
19 #include <linux/irq.h>
20 #include <linux/gpio.h>
23 #include <linux/mtd/partitions.h>
24 #include <linux/i2c.h>
25 #include <linux/platform_data/pca953x.h>
26 #include <linux/spi/spi.h>
27 #include <linux/spi/flash.h>
28 #include <linux/spi/mmc_spi.h>
29 #include <linux/mmc/host.h>
31 #include <sound/cs4271.h>
33 #include <mach/hardware.h>
34 #include <linux/platform_data/video-ep93xx.h>
35 #include <linux/platform_data/spi-ep93xx.h>
36 #include <mach/gpio-ep93xx.h>
38 #include <asm/mach-types.h>
39 #include <asm/mach/map.h>
40 #include <asm/mach/arch.h>
44 /*************************************************************************
45 * Static I/O mappings for the FPGA
46 *************************************************************************/
47 #define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE
48 #define VISION_VIRT_BASE 0xfebff000
50 static struct map_desc vision_io_desc
[] __initdata
= {
52 .virtual = VISION_VIRT_BASE
,
53 .pfn
= __phys_to_pfn(VISION_PHYS_BASE
),
59 static void __init
vision_map_io(void)
63 iotable_init(vision_io_desc
, ARRAY_SIZE(vision_io_desc
));
66 /*************************************************************************
68 *************************************************************************/
69 static struct ep93xx_eth_data vision_eth_data __initdata
= {
73 /*************************************************************************
75 *************************************************************************/
76 #define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1
78 static int vision_lcd_setup(struct platform_device
*pdev
)
82 err
= gpio_request_one(VISION_LCD_ENABLE
, GPIOF_INIT_HIGH
,
83 dev_name(&pdev
->dev
));
87 ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS
|
88 EP93XX_SYSCON_DEVCFG_RASONP3
|
89 EP93XX_SYSCON_DEVCFG_EXVC
);
94 static void vision_lcd_teardown(struct platform_device
*pdev
)
96 gpio_free(VISION_LCD_ENABLE
);
99 static void vision_lcd_blank(int blank_mode
, struct fb_info
*info
)
102 gpio_set_value(VISION_LCD_ENABLE
, 0);
104 gpio_set_value(VISION_LCD_ENABLE
, 1);
107 static struct ep93xxfb_mach_info ep93xxfb_info __initdata
= {
108 .flags
= EP93XXFB_USE_SDCSN0
| EP93XXFB_PCLK_FALLING
,
109 .setup
= vision_lcd_setup
,
110 .teardown
= vision_lcd_teardown
,
111 .blank
= vision_lcd_blank
,
115 /*************************************************************************
117 *************************************************************************/
118 #define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1)
119 #define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16)
120 #define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16)
121 #define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16)
123 static struct pca953x_platform_data pca953x_74_gpio_data
= {
124 .gpio_base
= PCA9539_74_GPIO_BASE
,
125 .irq_base
= EP93XX_BOARD_IRQ(0),
128 static struct pca953x_platform_data pca953x_75_gpio_data
= {
129 .gpio_base
= PCA9539_75_GPIO_BASE
,
133 static struct pca953x_platform_data pca953x_76_gpio_data
= {
134 .gpio_base
= PCA9539_76_GPIO_BASE
,
138 static struct pca953x_platform_data pca953x_77_gpio_data
= {
139 .gpio_base
= PCA9539_77_GPIO_BASE
,
143 /*************************************************************************
145 *************************************************************************/
147 static struct i2c_board_info vision_i2c_info
[] __initdata
= {
149 I2C_BOARD_INFO("isl1208", 0x6f),
150 .irq
= IRQ_EP93XX_EXT1
,
152 I2C_BOARD_INFO("pca9539", 0x74),
153 .platform_data
= &pca953x_74_gpio_data
,
155 I2C_BOARD_INFO("pca9539", 0x75),
156 .platform_data
= &pca953x_75_gpio_data
,
158 I2C_BOARD_INFO("pca9539", 0x76),
159 .platform_data
= &pca953x_76_gpio_data
,
161 I2C_BOARD_INFO("pca9539", 0x77),
162 .platform_data
= &pca953x_77_gpio_data
,
166 /*************************************************************************
167 * SPI CS4271 Audio Codec
168 *************************************************************************/
169 static struct cs4271_platform_data vision_cs4271_data
= {
170 .gpio_nreset
= EP93XX_GPIO_LINE_H(2),
173 /*************************************************************************
175 *************************************************************************/
176 static struct mtd_partition vision_spi_flash_partitions
[] = {
178 .name
= "SPI bootstrap",
182 .name
= "Bootstrap config",
183 .offset
= MTDPART_OFS_APPEND
,
186 .name
= "System config",
187 .offset
= MTDPART_OFS_APPEND
,
188 .size
= MTDPART_SIZ_FULL
,
192 static struct flash_platform_data vision_spi_flash_data
= {
194 .parts
= vision_spi_flash_partitions
,
195 .nr_parts
= ARRAY_SIZE(vision_spi_flash_partitions
),
198 /*************************************************************************
200 *************************************************************************/
201 static struct mmc_spi_platform_data vision_spi_mmc_data
= {
203 .powerup_msecs
= 100,
204 .ocr_mask
= MMC_VDD_32_33
| MMC_VDD_33_34
,
205 .flags
= MMC_SPI_USE_CD_GPIO
| MMC_SPI_USE_RO_GPIO
,
206 .cd_gpio
= EP93XX_GPIO_LINE_EGPIO15
,
208 .ro_gpio
= EP93XX_GPIO_LINE_F(0),
209 .caps2
= MMC_CAP2_RO_ACTIVE_HIGH
,
212 /*************************************************************************
214 *************************************************************************/
215 static struct spi_board_info vision_spi_board_info
[] __initdata
= {
217 .modalias
= "cs4271",
218 .platform_data
= &vision_cs4271_data
,
219 .max_speed_hz
= 6000000,
224 .modalias
= "sst25l",
225 .platform_data
= &vision_spi_flash_data
,
226 .max_speed_hz
= 20000000,
231 .modalias
= "mmc_spi",
232 .platform_data
= &vision_spi_mmc_data
,
233 .max_speed_hz
= 20000000,
240 static int vision_spi_chipselects
[] __initdata
= {
241 EP93XX_GPIO_LINE_EGPIO6
,
242 EP93XX_GPIO_LINE_EGPIO7
,
243 EP93XX_GPIO_LINE_G(2),
246 static struct ep93xx_spi_info vision_spi_master __initdata
= {
247 .chipselect
= vision_spi_chipselects
,
248 .num_chipselect
= ARRAY_SIZE(vision_spi_chipselects
),
252 /*************************************************************************
254 *************************************************************************/
255 static struct platform_device vision_audio_device
= {
256 .name
= "edb93xx-audio",
260 static void __init
vision_register_i2s(void)
262 ep93xx_register_i2s();
263 platform_device_register(&vision_audio_device
);
266 /*************************************************************************
267 * Machine Initialization
268 *************************************************************************/
269 static void __init
vision_init_machine(void)
271 ep93xx_init_devices();
272 ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE
, SZ_64M
);
273 ep93xx_register_eth(&vision_eth_data
, 1);
274 ep93xx_register_fb(&ep93xxfb_info
);
275 ep93xx_register_pwm(1, 0);
278 * Request the gpio expander's interrupt gpio line now to prevent
279 * the kernel from doing a WARN in gpiolib:gpio_ensure_requested().
281 if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN
,
283 pr_warn("cannot request interrupt gpio for pca9539:74\n");
285 vision_i2c_info
[1].irq
= gpio_to_irq(EP93XX_GPIO_LINE_F(7));
287 ep93xx_register_i2c(vision_i2c_info
,
288 ARRAY_SIZE(vision_i2c_info
));
289 ep93xx_register_spi(&vision_spi_master
, vision_spi_board_info
,
290 ARRAY_SIZE(vision_spi_board_info
));
291 vision_register_i2s();
294 MACHINE_START(VISION_EP9307
, "Vision Engraving Systems EP9307")
295 /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
296 .atag_offset
= 0x100,
297 .map_io
= vision_map_io
,
298 .init_irq
= ep93xx_init_irq
,
299 .init_time
= ep93xx_timer_init
,
300 .init_machine
= vision_init_machine
,
301 .init_late
= ep93xx_init_late
,
302 .restart
= ep93xx_restart
,