perf tools: Streamline bpf examples and headers installation
[linux/fpc-iii.git] / arch / arm / mach-shmobile / regulator-quirk-rcar-gen2.c
blob93f628acfd944fd5b03a012f18951945d5aa44e9
1 /*
2 * R-Car Generation 2 da9063/da9210 regulator quirk
4 * Certain Gen2 development boards have an da9063 and one or more da9210
5 * regulators. All of these regulators have their interrupt request lines
6 * tied to the same interrupt pin (IRQ2) on the SoC.
8 * After cold boot or da9063-induced restart, both the da9063 and da9210 seem
9 * to assert their interrupt request lines. Hence as soon as one driver
10 * requests this irq, it gets stuck in an interrupt storm, as it only manages
11 * to deassert its own interrupt request line, and the other driver hasn't
12 * installed an interrupt handler yet.
14 * To handle this, install a quirk that masks the interrupts in both the
15 * da9063 and da9210. This quirk has to run after the i2c master driver has
16 * been initialized, but before the i2c slave drivers are initialized.
18 * Copyright (C) 2015 Glider bvba
20 * This program is free software; you can redistribute it and/or modify
21 * it under the terms of the GNU General Public License as published by
22 * the Free Software Foundation; version 2 of the License.
24 * This program is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
30 #include <linux/device.h>
31 #include <linux/i2c.h>
32 #include <linux/init.h>
33 #include <linux/io.h>
34 #include <linux/notifier.h>
35 #include <linux/of.h>
36 #include <linux/mfd/da9063/registers.h>
39 #define IRQC_BASE 0xe61c0000
40 #define IRQC_MONITOR 0x104 /* IRQn Signal Level Monitor Register */
42 #define REGULATOR_IRQ_MASK BIT(2) /* IRQ2, active low */
44 /* start of DA9210 System Control and Event Registers */
45 #define DA9210_REG_MASK_A 0x54
47 static void __iomem *irqc;
49 /* first byte sets the memory pointer, following are consecutive reg values */
50 static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
51 static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
53 static struct i2c_msg da9xxx_msgs[3] = {
55 .addr = 0x58,
56 .len = ARRAY_SIZE(da9063_irq_clr),
57 .buf = da9063_irq_clr,
58 }, {
59 .addr = 0x68,
60 .len = ARRAY_SIZE(da9210_irq_clr),
61 .buf = da9210_irq_clr,
62 }, {
63 .addr = 0x70,
64 .len = ARRAY_SIZE(da9210_irq_clr),
65 .buf = da9210_irq_clr,
69 static int regulator_quirk_notify(struct notifier_block *nb,
70 unsigned long action, void *data)
72 struct device *dev = data;
73 struct i2c_client *client;
74 static bool done;
75 u32 mon;
77 if (done)
78 return 0;
80 mon = ioread32(irqc + IRQC_MONITOR);
81 dev_dbg(dev, "%s: %ld, IRQC_MONITOR = 0x%x\n", __func__, action, mon);
82 if (mon & REGULATOR_IRQ_MASK)
83 goto remove;
85 if (action != BUS_NOTIFY_ADD_DEVICE || dev->type == &i2c_adapter_type)
86 return 0;
88 client = to_i2c_client(dev);
89 dev_dbg(dev, "Detected %s\n", client->name);
91 if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
92 (client->addr == 0x68 && !strcmp(client->name, "da9210")) ||
93 (client->addr == 0x70 && !strcmp(client->name, "da9210"))) {
94 int ret, len;
96 /* There are two DA9210 on Stout, one on the other boards. */
97 len = of_machine_is_compatible("renesas,stout") ? 3 : 2;
99 dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
100 ret = i2c_transfer(client->adapter, da9xxx_msgs, len);
101 if (ret != len)
102 dev_err(&client->dev, "i2c error %d\n", ret);
105 mon = ioread32(irqc + IRQC_MONITOR);
106 if (mon & REGULATOR_IRQ_MASK)
107 goto remove;
109 return 0;
111 remove:
112 dev_info(dev, "IRQ2 is not asserted, removing quirk\n");
114 done = true;
115 iounmap(irqc);
116 return 0;
119 static struct notifier_block regulator_quirk_nb = {
120 .notifier_call = regulator_quirk_notify
123 static int __init rcar_gen2_regulator_quirk(void)
125 u32 mon;
127 if (!of_machine_is_compatible("renesas,koelsch") &&
128 !of_machine_is_compatible("renesas,lager") &&
129 !of_machine_is_compatible("renesas,stout") &&
130 !of_machine_is_compatible("renesas,gose"))
131 return -ENODEV;
133 irqc = ioremap(IRQC_BASE, PAGE_SIZE);
134 if (!irqc)
135 return -ENOMEM;
137 mon = ioread32(irqc + IRQC_MONITOR);
138 if (mon & REGULATOR_IRQ_MASK) {
139 pr_debug("%s: IRQ2 is not asserted, not installing quirk\n",
140 __func__);
141 iounmap(irqc);
142 return 0;
145 pr_info("IRQ2 is asserted, installing da9063/da9210 regulator quirk\n");
147 bus_register_notifier(&i2c_bus_type, &regulator_quirk_nb);
148 return 0;
151 arch_initcall(rcar_gen2_regulator_quirk);