Input: hilkbd - Add casts to HP9000/300 I/O accessors
[linux/fpc-iii.git] / drivers / ata / pata_atp867x.c
blob3729e2448eb6a540bee3f4882b30f10ba0d18fe5
1 /*
2 * pata_atp867x.c - ARTOP 867X 64bit 4-channel UDMA133 ATA controller driver
4 * (C) 2009 Google Inc. John(Jung-Ik) Lee <jilee@google.com>
6 * Per Atp867 data sheet rev 1.2, Acard.
7 * Based in part on early ide code from
8 * 2003-2004 by Eric Uhrhane, Google, Inc.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
25 * TODO:
26 * 1. RAID features [comparison, XOR, striping, mirroring, etc.]
29 #include <linux/kernel.h>
30 #include <linux/module.h>
31 #include <linux/pci.h>
32 #include <linux/blkdev.h>
33 #include <linux/delay.h>
34 #include <linux/device.h>
35 #include <linux/gfp.h>
36 #include <scsi/scsi_host.h>
37 #include <linux/libata.h>
39 #define DRV_NAME "pata_atp867x"
40 #define DRV_VERSION "0.7.5"
43 * IO Registers
44 * Note that all runtime hot priv ports are cached in ap private_data
47 enum {
48 ATP867X_IO_CHANNEL_OFFSET = 0x10,
51 * IO Register Bitfields
54 ATP867X_IO_PIOSPD_ACTIVE_SHIFT = 4,
55 ATP867X_IO_PIOSPD_RECOVER_SHIFT = 0,
57 ATP867X_IO_DMAMODE_MSTR_SHIFT = 0,
58 ATP867X_IO_DMAMODE_MSTR_MASK = 0x07,
59 ATP867X_IO_DMAMODE_SLAVE_SHIFT = 4,
60 ATP867X_IO_DMAMODE_SLAVE_MASK = 0x70,
62 ATP867X_IO_DMAMODE_UDMA_6 = 0x07,
63 ATP867X_IO_DMAMODE_UDMA_5 = 0x06,
64 ATP867X_IO_DMAMODE_UDMA_4 = 0x05,
65 ATP867X_IO_DMAMODE_UDMA_3 = 0x04,
66 ATP867X_IO_DMAMODE_UDMA_2 = 0x03,
67 ATP867X_IO_DMAMODE_UDMA_1 = 0x02,
68 ATP867X_IO_DMAMODE_UDMA_0 = 0x01,
69 ATP867X_IO_DMAMODE_DISABLE = 0x00,
71 ATP867X_IO_SYS_INFO_66MHZ = 0x04,
72 ATP867X_IO_SYS_INFO_SLOW_UDMA5 = 0x02,
73 ATP867X_IO_SYS_MASK_RESERVED = (~0xf1),
75 ATP867X_IO_PORTSPD_VAL = 0x1143,
76 ATP867X_PREREAD_VAL = 0x0200,
78 ATP867X_NUM_PORTS = 4,
79 ATP867X_BAR_IOBASE = 0,
80 ATP867X_BAR_ROMBASE = 6,
83 #define ATP867X_IOBASE(ap) ((ap)->host->iomap[0])
84 #define ATP867X_SYS_INFO(ap) (0x3F + ATP867X_IOBASE(ap))
86 #define ATP867X_IO_PORTBASE(ap, port) (0x00 + ATP867X_IOBASE(ap) + \
87 (port) * ATP867X_IO_CHANNEL_OFFSET)
88 #define ATP867X_IO_DMABASE(ap, port) (0x40 + \
89 ATP867X_IO_PORTBASE((ap), (port)))
91 #define ATP867X_IO_STATUS(ap, port) (0x07 + \
92 ATP867X_IO_PORTBASE((ap), (port)))
93 #define ATP867X_IO_ALTSTATUS(ap, port) (0x0E + \
94 ATP867X_IO_PORTBASE((ap), (port)))
97 * hot priv ports
99 #define ATP867X_IO_MSTRPIOSPD(ap, port) (0x08 + \
100 ATP867X_IO_DMABASE((ap), (port)))
101 #define ATP867X_IO_SLAVPIOSPD(ap, port) (0x09 + \
102 ATP867X_IO_DMABASE((ap), (port)))
103 #define ATP867X_IO_8BPIOSPD(ap, port) (0x0A + \
104 ATP867X_IO_DMABASE((ap), (port)))
105 #define ATP867X_IO_DMAMODE(ap, port) (0x0B + \
106 ATP867X_IO_DMABASE((ap), (port)))
108 #define ATP867X_IO_PORTSPD(ap, port) (0x4A + \
109 ATP867X_IO_PORTBASE((ap), (port)))
110 #define ATP867X_IO_PREREAD(ap, port) (0x4C + \
111 ATP867X_IO_PORTBASE((ap), (port)))
113 struct atp867x_priv {
114 void __iomem *dma_mode;
115 void __iomem *mstr_piospd;
116 void __iomem *slave_piospd;
117 void __iomem *eightb_piospd;
118 int pci66mhz;
121 static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
123 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
124 struct atp867x_priv *dp = ap->private_data;
125 u8 speed = adev->dma_mode;
126 u8 b;
127 u8 mode = speed - XFER_UDMA_0 + 1;
130 * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
131 * on 66MHz bus
132 * rev-A: UDMA_1~4 (5, 6 no change)
133 * rev-B: all UDMA modes
134 * UDMA_0 stays not to disable UDMA
136 if (dp->pci66mhz && mode > ATP867X_IO_DMAMODE_UDMA_0 &&
137 (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B ||
138 mode < ATP867X_IO_DMAMODE_UDMA_5))
139 mode--;
141 b = ioread8(dp->dma_mode);
142 if (adev->devno & 1) {
143 b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK) |
144 (mode << ATP867X_IO_DMAMODE_SLAVE_SHIFT);
145 } else {
146 b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK) |
147 (mode << ATP867X_IO_DMAMODE_MSTR_SHIFT);
149 iowrite8(b, dp->dma_mode);
152 static int atp867x_get_active_clocks_shifted(struct ata_port *ap,
153 unsigned int clk)
155 struct atp867x_priv *dp = ap->private_data;
156 unsigned char clocks = clk;
159 * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
160 * on 66MHz bus
162 if (dp->pci66mhz)
163 clocks++;
165 switch (clocks) {
166 case 0:
167 clocks = 1;
168 break;
169 case 1 ... 6:
170 break;
171 default:
172 printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
173 "Using 12clk.\n", clk);
174 /* fall through */
175 case 9 ... 12:
176 clocks = 7; /* 12 clk */
177 break;
178 case 7:
179 case 8: /* default 8 clk */
180 clocks = 0;
181 goto active_clock_shift_done;
184 active_clock_shift_done:
185 return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
188 static int atp867x_get_recover_clocks_shifted(unsigned int clk)
190 unsigned char clocks = clk;
192 switch (clocks) {
193 case 0:
194 clocks = 1;
195 break;
196 case 1 ... 11:
197 break;
198 case 13:
199 case 14:
200 --clocks; /* by the spec */
201 break;
202 case 15:
203 break;
204 default:
205 printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
206 "Using default 12clk.\n", clk);
207 /* fall through */
208 case 12: /* default 12 clk */
209 clocks = 0;
210 break;
213 return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
216 static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev)
218 struct ata_device *peer = ata_dev_pair(adev);
219 struct atp867x_priv *dp = ap->private_data;
220 u8 speed = adev->pio_mode;
221 struct ata_timing t, p;
222 int T, UT;
223 u8 b;
225 T = 1000000000 / 33333;
226 UT = T / 4;
228 ata_timing_compute(adev, speed, &t, T, UT);
229 if (peer && peer->pio_mode) {
230 ata_timing_compute(peer, peer->pio_mode, &p, T, UT);
231 ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT);
234 b = ioread8(dp->dma_mode);
235 if (adev->devno & 1)
236 b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK);
237 else
238 b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
239 iowrite8(b, dp->dma_mode);
241 b = atp867x_get_active_clocks_shifted(ap, t.active) |
242 atp867x_get_recover_clocks_shifted(t.recover);
244 if (adev->devno & 1)
245 iowrite8(b, dp->slave_piospd);
246 else
247 iowrite8(b, dp->mstr_piospd);
249 b = atp867x_get_active_clocks_shifted(ap, t.act8b) |
250 atp867x_get_recover_clocks_shifted(t.rec8b);
252 iowrite8(b, dp->eightb_piospd);
255 static int atp867x_cable_override(struct pci_dev *pdev)
257 if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP &&
258 (pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A ||
259 pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) {
260 return 1;
262 return 0;
265 static int atp867x_cable_detect(struct ata_port *ap)
267 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
269 if (atp867x_cable_override(pdev))
270 return ATA_CBL_PATA40_SHORT;
272 return ATA_CBL_PATA_UNK;
275 static struct scsi_host_template atp867x_sht = {
276 ATA_BMDMA_SHT(DRV_NAME),
279 static struct ata_port_operations atp867x_ops = {
280 .inherits = &ata_bmdma_port_ops,
281 .cable_detect = atp867x_cable_detect,
282 .set_piomode = atp867x_set_piomode,
283 .set_dmamode = atp867x_set_dmamode,
287 #ifdef ATP867X_DEBUG
288 static void atp867x_check_res(struct pci_dev *pdev)
290 int i;
291 unsigned long start, len;
293 /* Check the PCI resources for this channel are enabled */
294 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
295 start = pci_resource_start(pdev, i);
296 len = pci_resource_len(pdev, i);
297 printk(KERN_DEBUG "ATP867X: resource start:len=%lx:%lx\n",
298 start, len);
302 static void atp867x_check_ports(struct ata_port *ap, int port)
304 struct ata_ioports *ioaddr = &ap->ioaddr;
305 struct atp867x_priv *dp = ap->private_data;
307 printk(KERN_DEBUG "ATP867X: port[%d] addresses\n"
308 " cmd_addr =0x%llx, 0x%llx\n"
309 " ctl_addr =0x%llx, 0x%llx\n"
310 " bmdma_addr =0x%llx, 0x%llx\n"
311 " data_addr =0x%llx\n"
312 " error_addr =0x%llx\n"
313 " feature_addr =0x%llx\n"
314 " nsect_addr =0x%llx\n"
315 " lbal_addr =0x%llx\n"
316 " lbam_addr =0x%llx\n"
317 " lbah_addr =0x%llx\n"
318 " device_addr =0x%llx\n"
319 " status_addr =0x%llx\n"
320 " command_addr =0x%llx\n"
321 " dp->dma_mode =0x%llx\n"
322 " dp->mstr_piospd =0x%llx\n"
323 " dp->slave_piospd =0x%llx\n"
324 " dp->eightb_piospd =0x%llx\n"
325 " dp->pci66mhz =0x%lx\n",
326 port,
327 (unsigned long long)ioaddr->cmd_addr,
328 (unsigned long long)ATP867X_IO_PORTBASE(ap, port),
329 (unsigned long long)ioaddr->ctl_addr,
330 (unsigned long long)ATP867X_IO_ALTSTATUS(ap, port),
331 (unsigned long long)ioaddr->bmdma_addr,
332 (unsigned long long)ATP867X_IO_DMABASE(ap, port),
333 (unsigned long long)ioaddr->data_addr,
334 (unsigned long long)ioaddr->error_addr,
335 (unsigned long long)ioaddr->feature_addr,
336 (unsigned long long)ioaddr->nsect_addr,
337 (unsigned long long)ioaddr->lbal_addr,
338 (unsigned long long)ioaddr->lbam_addr,
339 (unsigned long long)ioaddr->lbah_addr,
340 (unsigned long long)ioaddr->device_addr,
341 (unsigned long long)ioaddr->status_addr,
342 (unsigned long long)ioaddr->command_addr,
343 (unsigned long long)dp->dma_mode,
344 (unsigned long long)dp->mstr_piospd,
345 (unsigned long long)dp->slave_piospd,
346 (unsigned long long)dp->eightb_piospd,
347 (unsigned long)dp->pci66mhz);
349 #endif
351 static int atp867x_set_priv(struct ata_port *ap)
353 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
354 struct atp867x_priv *dp;
355 int port = ap->port_no;
357 dp = ap->private_data =
358 devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
359 if (dp == NULL)
360 return -ENOMEM;
362 dp->dma_mode = ATP867X_IO_DMAMODE(ap, port);
363 dp->mstr_piospd = ATP867X_IO_MSTRPIOSPD(ap, port);
364 dp->slave_piospd = ATP867X_IO_SLAVPIOSPD(ap, port);
365 dp->eightb_piospd = ATP867X_IO_8BPIOSPD(ap, port);
367 dp->pci66mhz =
368 ioread8(ATP867X_SYS_INFO(ap)) & ATP867X_IO_SYS_INFO_66MHZ;
370 return 0;
373 static void atp867x_fixup(struct ata_host *host)
375 struct pci_dev *pdev = to_pci_dev(host->dev);
376 struct ata_port *ap = host->ports[0];
377 int i;
378 u8 v;
381 * Broken BIOS might not set latency high enough
383 pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &v);
384 if (v < 0x80) {
385 v = 0x80;
386 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, v);
387 printk(KERN_DEBUG "ATP867X: set latency timer of device %s"
388 " to %d\n", pci_name(pdev), v);
392 * init 8bit io ports speed(0aaarrrr) to 43h and
393 * init udma modes of master/slave to 0/0(11h)
395 for (i = 0; i < ATP867X_NUM_PORTS; i++)
396 iowrite16(ATP867X_IO_PORTSPD_VAL, ATP867X_IO_PORTSPD(ap, i));
399 * init PreREAD counts
401 for (i = 0; i < ATP867X_NUM_PORTS; i++)
402 iowrite16(ATP867X_PREREAD_VAL, ATP867X_IO_PREREAD(ap, i));
404 v = ioread8(ATP867X_IOBASE(ap) + 0x28);
405 v &= 0xcf; /* Enable INTA#: bit4=0 means enable */
406 v |= 0xc0; /* Enable PCI burst, MRM & not immediate interrupts */
407 iowrite8(v, ATP867X_IOBASE(ap) + 0x28);
410 * Turn off the over clocked udma5 mode, only for Rev-B
412 v = ioread8(ATP867X_SYS_INFO(ap));
413 v &= ATP867X_IO_SYS_MASK_RESERVED;
414 if (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B)
415 v |= ATP867X_IO_SYS_INFO_SLOW_UDMA5;
416 iowrite8(v, ATP867X_SYS_INFO(ap));
419 static int atp867x_ata_pci_sff_init_host(struct ata_host *host)
421 struct device *gdev = host->dev;
422 struct pci_dev *pdev = to_pci_dev(gdev);
423 unsigned int mask = 0;
424 int i, rc;
427 * do not map rombase
429 rc = pcim_iomap_regions(pdev, 1 << ATP867X_BAR_IOBASE, DRV_NAME);
430 if (rc == -EBUSY)
431 pcim_pin_device(pdev);
432 if (rc)
433 return rc;
434 host->iomap = pcim_iomap_table(pdev);
436 #ifdef ATP867X_DEBUG
437 atp867x_check_res(pdev);
439 for (i = 0; i < PCI_ROM_RESOURCE; i++)
440 printk(KERN_DEBUG "ATP867X: iomap[%d]=0x%llx\n", i,
441 (unsigned long long)(host->iomap[i]));
442 #endif
445 * request, iomap BARs and init port addresses accordingly
447 for (i = 0; i < host->n_ports; i++) {
448 struct ata_port *ap = host->ports[i];
449 struct ata_ioports *ioaddr = &ap->ioaddr;
451 ioaddr->cmd_addr = ATP867X_IO_PORTBASE(ap, i);
452 ioaddr->ctl_addr = ioaddr->altstatus_addr
453 = ATP867X_IO_ALTSTATUS(ap, i);
454 ioaddr->bmdma_addr = ATP867X_IO_DMABASE(ap, i);
456 ata_sff_std_ports(ioaddr);
457 rc = atp867x_set_priv(ap);
458 if (rc)
459 return rc;
461 #ifdef ATP867X_DEBUG
462 atp867x_check_ports(ap, i);
463 #endif
464 ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
465 (unsigned long)ioaddr->cmd_addr,
466 (unsigned long)ioaddr->ctl_addr);
467 ata_port_desc(ap, "bmdma 0x%lx",
468 (unsigned long)ioaddr->bmdma_addr);
470 mask |= 1 << i;
473 if (!mask) {
474 dev_err(gdev, "no available native port\n");
475 return -ENODEV;
478 atp867x_fixup(host);
480 rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
481 if (rc)
482 return rc;
484 rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
485 return rc;
488 static int atp867x_init_one(struct pci_dev *pdev,
489 const struct pci_device_id *id)
491 static const struct ata_port_info info_867x = {
492 .flags = ATA_FLAG_SLAVE_POSS,
493 .pio_mask = ATA_PIO4,
494 .udma_mask = ATA_UDMA6,
495 .port_ops = &atp867x_ops,
498 struct ata_host *host;
499 const struct ata_port_info *ppi[] = { &info_867x, NULL };
500 int rc;
502 ata_print_version_once(&pdev->dev, DRV_VERSION);
504 rc = pcim_enable_device(pdev);
505 if (rc)
506 return rc;
508 printk(KERN_INFO "ATP867X: ATP867 ATA UDMA133 controller (rev %02X)",
509 pdev->device);
511 host = ata_host_alloc_pinfo(&pdev->dev, ppi, ATP867X_NUM_PORTS);
512 if (!host) {
513 dev_err(&pdev->dev, "failed to allocate ATA host\n");
514 rc = -ENOMEM;
515 goto err_out;
518 rc = atp867x_ata_pci_sff_init_host(host);
519 if (rc) {
520 dev_err(&pdev->dev, "failed to init host\n");
521 goto err_out;
524 pci_set_master(pdev);
526 rc = ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
527 IRQF_SHARED, &atp867x_sht);
528 if (rc)
529 dev_err(&pdev->dev, "failed to activate host\n");
531 err_out:
532 return rc;
535 #ifdef CONFIG_PM_SLEEP
536 static int atp867x_reinit_one(struct pci_dev *pdev)
538 struct ata_host *host = pci_get_drvdata(pdev);
539 int rc;
541 rc = ata_pci_device_do_resume(pdev);
542 if (rc)
543 return rc;
545 atp867x_fixup(host);
547 ata_host_resume(host);
548 return 0;
550 #endif
552 static struct pci_device_id atp867x_pci_tbl[] = {
553 { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867A), 0 },
554 { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867B), 0 },
555 { },
558 static struct pci_driver atp867x_driver = {
559 .name = DRV_NAME,
560 .id_table = atp867x_pci_tbl,
561 .probe = atp867x_init_one,
562 .remove = ata_pci_remove_one,
563 #ifdef CONFIG_PM_SLEEP
564 .suspend = ata_pci_device_suspend,
565 .resume = atp867x_reinit_one,
566 #endif
569 module_pci_driver(atp867x_driver);
571 MODULE_AUTHOR("John(Jung-Ik) Lee, Google Inc.");
572 MODULE_DESCRIPTION("low level driver for Artop/Acard 867x ATA controller");
573 MODULE_LICENSE("GPL");
574 MODULE_DEVICE_TABLE(pci, atp867x_pci_tbl);
575 MODULE_VERSION(DRV_VERSION);