Input: hilkbd - Add casts to HP9000/300 I/O accessors

[linux/fpc-iii.git] / drivers / gpu / drm / drm_crtc.c

/*
 * Copyright (c) 2006-2008 Intel Corporation
 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
 * Copyright (c) 2008 Red Hat Inc.
 *
 * DRM core CRTC related functions
 *
 * Permission to use, copy, modify, distribute, and sell this software and its
 * documentation for any purpose is hereby granted without fee, provided that
 * the above copyright notice appear in all copies and that both that copyright
 * notice and this permission notice appear in supporting documentation, and
 * that the name of the copyright holders not be used in advertising or
 * publicity pertaining to distribution of the software without specific,
 * written prior permission.  The copyright holders make no representations
 * about the suitability of this software for any purpose.  It is provided "as
 * is" without express or implied warranty.
 *
 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
 * OF THIS SOFTWARE.
 *
 * Authors:
 *      Keith Packard
 *      Eric Anholt <eric@anholt.net>
 *      Dave Airlie <airlied@linux.ie>
 *      Jesse Barnes <jesse.barnes@intel.com>
 */
#include <linux/ctype.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/export.h>
#include <linux/dma-fence.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_edid.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_modeset_lock.h>
#include <drm/drm_atomic.h>
#include <drm/drm_auth.h>
#include <drm/drm_debugfs_crc.h>

#include "drm_crtc_internal.h"
#include "drm_internal.h"

/**
 * DOC: overview
 *
 * A CRTC represents the overall display pipeline. It receives pixel data from
 * &drm_plane and blends them together. The &drm_display_mode is also attached
 * to the CRTC, specifying display timings. On the output side the data is fed
 * to one or more &drm_encoder, which are then each connected to one
 * &drm_connector.
 *
 * To create a CRTC, a KMS drivers allocates and zeroes an instances of
 * &struct drm_crtc (possibly as part of a larger structure) and registers it
 * with a call to drm_crtc_init_with_planes().
 *
 * The CRTC is also the entry point for legacy modeset operations, see
 * &drm_crtc_funcs.set_config, legacy plane operations, see
 * &drm_crtc_funcs.page_flip and &drm_crtc_funcs.cursor_set2, and other legacy
 * operations like &drm_crtc_funcs.gamma_set. For atomic drivers all these
 * features are controlled through &drm_property and
 * &drm_mode_config_funcs.atomic_check and &drm_mode_config_funcs.atomic_check.
 */

/**
 * drm_crtc_from_index - find the registered CRTC at an index
 * @dev: DRM device
 * @idx: index of registered CRTC to find for
 *
 * Given a CRTC index, return the registered CRTC from DRM device's
 * list of CRTCs with matching index. This is the inverse of drm_crtc_index().
 * It's useful in the vblank callbacks (like &drm_driver.enable_vblank or
 * &drm_driver.disable_vblank), since that still deals with indices instead
 * of pointers to &struct drm_crtc."
 */
struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx)
{
        struct drm_crtc *crtc;

        drm_for_each_crtc(crtc, dev)
                if (idx == crtc->index)
                        return crtc;

        return NULL;
}
EXPORT_SYMBOL(drm_crtc_from_index);

/**
 * drm_crtc_force_disable - Forcibly turn off a CRTC
 * @crtc: CRTC to turn off
 *
 * Note: This should only be used by non-atomic legacy drivers.
 *
 * Returns:
 * Zero on success, error code on failure.
 */
int drm_crtc_force_disable(struct drm_crtc *crtc)
{
        struct drm_mode_set set = {
                .crtc = crtc,
        };

        WARN_ON(drm_drv_uses_atomic_modeset(crtc->dev));

        return drm_mode_set_config_internal(&set);
}
EXPORT_SYMBOL(drm_crtc_force_disable);

/**
 * drm_crtc_force_disable_all - Forcibly turn off all enabled CRTCs
 * @dev: DRM device whose CRTCs to turn off
 *
 * Drivers may want to call this on unload to ensure that all displays are
 * unlit and the GPU is in a consistent, low power state. Takes modeset locks.
 *
 * Note: This should only be used by non-atomic legacy drivers. For an atomic
 * version look at drm_atomic_helper_shutdown().
 *
 * Returns:
 * Zero on success, error code on failure.
 */
int drm_crtc_force_disable_all(struct drm_device *dev)
{
        struct drm_crtc *crtc;
        int ret = 0;

        drm_modeset_lock_all(dev);
        drm_for_each_crtc(crtc, dev)
                if (crtc->enabled) {
                        ret = drm_crtc_force_disable(crtc);
                        if (ret)
                                goto out;
                }
out:
        drm_modeset_unlock_all(dev);
        return ret;
}
EXPORT_SYMBOL(drm_crtc_force_disable_all);

static unsigned int drm_num_crtcs(struct drm_device *dev)
{
        unsigned int num = 0;
        struct drm_crtc *tmp;

        drm_for_each_crtc(tmp, dev) {
                num++;
        }

        return num;
}

int drm_crtc_register_all(struct drm_device *dev)
{
        struct drm_crtc *crtc;
        int ret = 0;

        drm_for_each_crtc(crtc, dev) {
                if (drm_debugfs_crtc_add(crtc))
                        DRM_ERROR("Failed to initialize debugfs entry for CRTC '%s'.\n",
                                  crtc->name);

                if (crtc->funcs->late_register)
                        ret = crtc->funcs->late_register(crtc);
                if (ret)
                        return ret;
        }

        return 0;
}

void drm_crtc_unregister_all(struct drm_device *dev)
{
        struct drm_crtc *crtc;

        drm_for_each_crtc(crtc, dev) {
                if (crtc->funcs->early_unregister)
                        crtc->funcs->early_unregister(crtc);
                drm_debugfs_crtc_remove(crtc);
        }
}

static int drm_crtc_crc_init(struct drm_crtc *crtc)
{
#ifdef CONFIG_DEBUG_FS
        spin_lock_init(&crtc->crc.lock);
        init_waitqueue_head(&crtc->crc.wq);
        crtc->crc.source = kstrdup("auto", GFP_KERNEL);
        if (!crtc->crc.source)
                return -ENOMEM;
#endif
        return 0;
}

static void drm_crtc_crc_fini(struct drm_crtc *crtc)
{
#ifdef CONFIG_DEBUG_FS
        kfree(crtc->crc.source);
#endif
}

static const struct dma_fence_ops drm_crtc_fence_ops;

static struct drm_crtc *fence_to_crtc(struct dma_fence *fence)
{
        BUG_ON(fence->ops != &drm_crtc_fence_ops);
        return container_of(fence->lock, struct drm_crtc, fence_lock);
}

static const char *drm_crtc_fence_get_driver_name(struct dma_fence *fence)
{
        struct drm_crtc *crtc = fence_to_crtc(fence);

        return crtc->dev->driver->name;
}

static const char *drm_crtc_fence_get_timeline_name(struct dma_fence *fence)
{
        struct drm_crtc *crtc = fence_to_crtc(fence);

        return crtc->timeline_name;
}

static bool drm_crtc_fence_enable_signaling(struct dma_fence *fence)
{
        return true;
}

static const struct dma_fence_ops drm_crtc_fence_ops = {
        .get_driver_name = drm_crtc_fence_get_driver_name,
        .get_timeline_name = drm_crtc_fence_get_timeline_name,
        .enable_signaling = drm_crtc_fence_enable_signaling,
        .wait = dma_fence_default_wait,
};

struct dma_fence *drm_crtc_create_fence(struct drm_crtc *crtc)
{
        struct dma_fence *fence;

        fence = kzalloc(sizeof(*fence), GFP_KERNEL);
        if (!fence)
                return NULL;

        dma_fence_init(fence, &drm_crtc_fence_ops, &crtc->fence_lock,
                       crtc->fence_context, ++crtc->fence_seqno);

        return fence;
}

/**
 * drm_crtc_init_with_planes - Initialise a new CRTC object with
 *    specified primary and cursor planes.
 * @dev: DRM device
 * @crtc: CRTC object to init
 * @primary: Primary plane for CRTC
 * @cursor: Cursor plane for CRTC
 * @funcs: callbacks for the new CRTC
 * @name: printf style format string for the CRTC name, or NULL for default name
 *
 * Inits a new object created as base part of a driver crtc object. Drivers
 * should use this function instead of drm_crtc_init(), which is only provided
 * for backwards compatibility with drivers which do not yet support universal
 * planes). For really simple hardware which has only 1 plane look at
 * drm_simple_display_pipe_init() instead.
 *
 * Returns:
 * Zero on success, error code on failure.
 */
int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc,
                              struct drm_plane *primary,
                              struct drm_plane *cursor,
                              const struct drm_crtc_funcs *funcs,
                              const char *name, ...)
{
        struct drm_mode_config *config = &dev->mode_config;
        int ret;

        WARN_ON(primary && primary->type != DRM_PLANE_TYPE_PRIMARY);
        WARN_ON(cursor && cursor->type != DRM_PLANE_TYPE_CURSOR);

        /* crtc index is used with 32bit bitmasks */
        if (WARN_ON(config->num_crtc >= 32))
                return -EINVAL;

        crtc->dev = dev;
        crtc->funcs = funcs;

        INIT_LIST_HEAD(&crtc->commit_list);
        spin_lock_init(&crtc->commit_lock);

        drm_modeset_lock_init(&crtc->mutex);
        ret = drm_mode_object_add(dev, &crtc->base, DRM_MODE_OBJECT_CRTC);
        if (ret)
                return ret;

        if (name) {
                va_list ap;

                va_start(ap, name);
                crtc->name = kvasprintf(GFP_KERNEL, name, ap);
                va_end(ap);
        } else {
                crtc->name = kasprintf(GFP_KERNEL, "crtc-%d",
                                       drm_num_crtcs(dev));
        }
        if (!crtc->name) {
                drm_mode_object_unregister(dev, &crtc->base);
                return -ENOMEM;
        }

        crtc->fence_context = dma_fence_context_alloc(1);
        spin_lock_init(&crtc->fence_lock);
        snprintf(crtc->timeline_name, sizeof(crtc->timeline_name),
                 "CRTC:%d-%s", crtc->base.id, crtc->name);

        crtc->base.properties = &crtc->properties;

        list_add_tail(&crtc->head, &config->crtc_list);
        crtc->index = config->num_crtc++;

        crtc->primary = primary;
        crtc->cursor = cursor;
        if (primary && !primary->possible_crtcs)
                primary->possible_crtcs = 1 << drm_crtc_index(crtc);
        if (cursor && !cursor->possible_crtcs)
                cursor->possible_crtcs = 1 << drm_crtc_index(crtc);

        ret = drm_crtc_crc_init(crtc);
        if (ret) {
                drm_mode_object_unregister(dev, &crtc->base);
                return ret;
        }

        if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
                drm_object_attach_property(&crtc->base, config->prop_active, 0);
                drm_object_attach_property(&crtc->base, config->prop_mode_id, 0);
                drm_object_attach_property(&crtc->base,
                                           config->prop_out_fence_ptr, 0);
        }

        return 0;
}
EXPORT_SYMBOL(drm_crtc_init_with_planes);

/**
 * drm_crtc_cleanup - Clean up the core crtc usage
 * @crtc: CRTC to cleanup
 *
 * This function cleans up @crtc and removes it from the DRM mode setting
 * core. Note that the function does *not* free the crtc structure itself,
 * this is the responsibility of the caller.
 */
void drm_crtc_cleanup(struct drm_crtc *crtc)
{
        struct drm_device *dev = crtc->dev;

        /* Note that the crtc_list is considered to be static; should we
         * remove the drm_crtc at runtime we would have to decrement all
         * the indices on the drm_crtc after us in the crtc_list.
         */

        drm_crtc_crc_fini(crtc);

        kfree(crtc->gamma_store);
        crtc->gamma_store = NULL;

        drm_modeset_lock_fini(&crtc->mutex);

        drm_mode_object_unregister(dev, &crtc->base);
        list_del(&crtc->head);
        dev->mode_config.num_crtc--;

        WARN_ON(crtc->state && !crtc->funcs->atomic_destroy_state);
        if (crtc->state && crtc->funcs->atomic_destroy_state)
                crtc->funcs->atomic_destroy_state(crtc, crtc->state);

        kfree(crtc->name);

        memset(crtc, 0, sizeof(*crtc));
}
EXPORT_SYMBOL(drm_crtc_cleanup);

/**
 * drm_mode_getcrtc - get CRTC configuration
 * @dev: drm device for the ioctl
 * @data: data pointer for the ioctl
 * @file_priv: drm file for the ioctl call
 *
 * Construct a CRTC configuration structure to return to the user.
 *
 * Called by the user via ioctl.
 *
 * Returns:
 * Zero on success, negative errno on failure.
 */
int drm_mode_getcrtc(struct drm_device *dev,
                     void *data, struct drm_file *file_priv)
{
        struct drm_mode_crtc *crtc_resp = data;
        struct drm_crtc *crtc;
        struct drm_plane *plane;

        if (!drm_core_check_feature(dev, DRIVER_MODESET))
                return -EINVAL;

        crtc = drm_crtc_find(dev, file_priv, crtc_resp->crtc_id);
        if (!crtc)
                return -ENOENT;

        plane = crtc->primary;

        crtc_resp->gamma_size = crtc->gamma_size;

        drm_modeset_lock(&plane->mutex, NULL);
        if (plane->state && plane->state->fb)
                crtc_resp->fb_id = plane->state->fb->base.id;
        else if (!plane->state && plane->fb)
                crtc_resp->fb_id = plane->fb->base.id;
        else
                crtc_resp->fb_id = 0;

        if (plane->state) {
                crtc_resp->x = plane->state->src_x >> 16;
                crtc_resp->y = plane->state->src_y >> 16;
        }
        drm_modeset_unlock(&plane->mutex);

        drm_modeset_lock(&crtc->mutex, NULL);
        if (crtc->state) {
                if (crtc->state->enable) {
                        drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->state->mode);
                        crtc_resp->mode_valid = 1;
                } else {
                        crtc_resp->mode_valid = 0;
                }
        } else {
                crtc_resp->x = crtc->x;
                crtc_resp->y = crtc->y;

                if (crtc->enabled) {
                        drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->mode);
                        crtc_resp->mode_valid = 1;

                } else {
                        crtc_resp->mode_valid = 0;
                }
        }
        if (!file_priv->aspect_ratio_allowed)
                crtc_resp->mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK;
        drm_modeset_unlock(&crtc->mutex);

        return 0;
}

static int __drm_mode_set_config_internal(struct drm_mode_set *set,
                                          struct drm_modeset_acquire_ctx *ctx)
{
        struct drm_crtc *crtc = set->crtc;
        struct drm_framebuffer *fb;
        struct drm_crtc *tmp;
        int ret;

        /*
         * NOTE: ->set_config can also disable other crtcs (if we steal all
         * connectors from it), hence we need to refcount the fbs across all
         * crtcs. Atomic modeset will have saner semantics ...
         */
        drm_for_each_crtc(tmp, crtc->dev)
                tmp->primary->old_fb = tmp->primary->fb;

        fb = set->fb;

        ret = crtc->funcs->set_config(set, ctx);
        if (ret == 0) {
                crtc->primary->crtc = fb ? crtc : NULL;
                crtc->primary->fb = fb;
        }

        drm_for_each_crtc(tmp, crtc->dev) {
                if (tmp->primary->fb)
                        drm_framebuffer_get(tmp->primary->fb);
                if (tmp->primary->old_fb)
                        drm_framebuffer_put(tmp->primary->old_fb);
                tmp->primary->old_fb = NULL;
        }

        return ret;
}
/**
 * drm_mode_set_config_internal - helper to call &drm_mode_config_funcs.set_config
 * @set: modeset config to set
 *
 * This is a little helper to wrap internal calls to the
 * &drm_mode_config_funcs.set_config driver interface. The only thing it adds is
 * correct refcounting dance.
 *
 * This should only be used by non-atomic legacy drivers.
 *
 * Returns:
 * Zero on success, negative errno on failure.
 */
int drm_mode_set_config_internal(struct drm_mode_set *set)
{
        WARN_ON(drm_drv_uses_atomic_modeset(set->crtc->dev));

        return __drm_mode_set_config_internal(set, NULL);
}
EXPORT_SYMBOL(drm_mode_set_config_internal);

/**
 * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
 *     CRTC viewport
 * @crtc: CRTC that framebuffer will be displayed on
 * @x: x panning
 * @y: y panning
 * @mode: mode that framebuffer will be displayed under
 * @fb: framebuffer to check size of
 */
int drm_crtc_check_viewport(const struct drm_crtc *crtc,
                            int x, int y,
                            const struct drm_display_mode *mode,
                            const struct drm_framebuffer *fb)

{
        int hdisplay, vdisplay;

        drm_mode_get_hv_timing(mode, &hdisplay, &vdisplay);

        if (crtc->state &&
            drm_rotation_90_or_270(crtc->primary->state->rotation))
                swap(hdisplay, vdisplay);

        return drm_framebuffer_check_src_coords(x << 16, y << 16,
                                                hdisplay << 16, vdisplay << 16,
                                                fb);
}
EXPORT_SYMBOL(drm_crtc_check_viewport);

/**
 * drm_mode_setcrtc - set CRTC configuration
 * @dev: drm device for the ioctl
 * @data: data pointer for the ioctl
 * @file_priv: drm file for the ioctl call
 *
 * Build a new CRTC configuration based on user request.
 *
 * Called by the user via ioctl.
 *
 * Returns:
 * Zero on success, negative errno on failure.
 */
int drm_mode_setcrtc(struct drm_device *dev, void *data,
                     struct drm_file *file_priv)
{
        struct drm_mode_config *config = &dev->mode_config;
        struct drm_mode_crtc *crtc_req = data;
        struct drm_crtc *crtc;
        struct drm_plane *plane;
        struct drm_connector **connector_set = NULL, *connector;
        struct drm_framebuffer *fb = NULL;
        struct drm_display_mode *mode = NULL;
        struct drm_mode_set set;
        uint32_t __user *set_connectors_ptr;
        struct drm_modeset_acquire_ctx ctx;
        int ret;
        int i;

        if (!drm_core_check_feature(dev, DRIVER_MODESET))
                return -EINVAL;

        /*
         * Universal plane src offsets are only 16.16, prevent havoc for
         * drivers using universal plane code internally.
         */
        if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000)
                return -ERANGE;

        crtc = drm_crtc_find(dev, file_priv, crtc_req->crtc_id);
        if (!crtc) {
                DRM_DEBUG_KMS("Unknown CRTC ID %d\n", crtc_req->crtc_id);
                return -ENOENT;
        }
        DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name);

        plane = crtc->primary;

        mutex_lock(&crtc->dev->mode_config.mutex);
        drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
retry:
        ret = drm_modeset_lock_all_ctx(crtc->dev, &ctx);
        if (ret)
                goto out;

        if (crtc_req->mode_valid) {
                /* If we have a mode we need a framebuffer. */
                /* If we pass -1, set the mode with the currently bound fb */
                if (crtc_req->fb_id == -1) {
                        struct drm_framebuffer *old_fb;

                        if (plane->state)
                                old_fb = plane->state->fb;
                        else
                                old_fb = plane->fb;

                        if (!old_fb) {
                                DRM_DEBUG_KMS("CRTC doesn't have current FB\n");
                                ret = -EINVAL;
                                goto out;
                        }

                        fb = old_fb;
                        /* Make refcounting symmetric with the lookup path. */
                        drm_framebuffer_get(fb);
                } else {
                        fb = drm_framebuffer_lookup(dev, file_priv, crtc_req->fb_id);
                        if (!fb) {
                                DRM_DEBUG_KMS("Unknown FB ID%d\n",
                                                crtc_req->fb_id);
                                ret = -ENOENT;
                                goto out;
                        }
                }

                mode = drm_mode_create(dev);
                if (!mode) {
                        ret = -ENOMEM;
                        goto out;
                }
                if (!file_priv->aspect_ratio_allowed &&
                    (crtc_req->mode.flags & DRM_MODE_FLAG_PIC_AR_MASK) != DRM_MODE_FLAG_PIC_AR_NONE) {
                        DRM_DEBUG_KMS("Unexpected aspect-ratio flag bits\n");
                        ret = -EINVAL;
                        goto out;
                }


                ret = drm_mode_convert_umode(dev, mode, &crtc_req->mode);
                if (ret) {
                        DRM_DEBUG_KMS("Invalid mode\n");
                        goto out;
                }

                /*
                 * Check whether the primary plane supports the fb pixel format.
                 * Drivers not implementing the universal planes API use a
                 * default formats list provided by the DRM core which doesn't
                 * match real hardware capabilities. Skip the check in that
                 * case.
                 */
                if (!plane->format_default) {
                        ret = drm_plane_check_pixel_format(plane,
                                                           fb->format->format,
                                                           fb->modifier);
                        if (ret) {
                                struct drm_format_name_buf format_name;
                                DRM_DEBUG_KMS("Invalid pixel format %s, modifier 0x%llx\n",
                                              drm_get_format_name(fb->format->format,
                                                                  &format_name),
                                              fb->modifier);
                                goto out;
                        }
                }

                ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y,
                                              mode, fb);
                if (ret)
                        goto out;

        }

        if (crtc_req->count_connectors == 0 && mode) {
                DRM_DEBUG_KMS("Count connectors is 0 but mode set\n");
                ret = -EINVAL;
                goto out;
        }

        if (crtc_req->count_connectors > 0 && (!mode || !fb)) {
                DRM_DEBUG_KMS("Count connectors is %d but no mode or fb set\n",
                          crtc_req->count_connectors);
                ret = -EINVAL;
                goto out;
        }

        if (crtc_req->count_connectors > 0) {
                u32 out_id;

                /* Avoid unbounded kernel memory allocation */
                if (crtc_req->count_connectors > config->num_connector) {
                        ret = -EINVAL;
                        goto out;
                }

                connector_set = kmalloc_array(crtc_req->count_connectors,
                                              sizeof(struct drm_connector *),
                                              GFP_KERNEL);
                if (!connector_set) {
                        ret = -ENOMEM;
                        goto out;
                }

                for (i = 0; i < crtc_req->count_connectors; i++) {
                        connector_set[i] = NULL;
                        set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr;
                        if (get_user(out_id, &set_connectors_ptr[i])) {
                                ret = -EFAULT;
                                goto out;
                        }

                        connector = drm_connector_lookup(dev, file_priv, out_id);
                        if (!connector) {
                                DRM_DEBUG_KMS("Connector id %d unknown\n",
                                                out_id);
                                ret = -ENOENT;
                                goto out;
                        }
                        DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
                                        connector->base.id,
                                        connector->name);

                        connector_set[i] = connector;
                }
        }

        set.crtc = crtc;
        set.x = crtc_req->x;
        set.y = crtc_req->y;
        set.mode = mode;
        set.connectors = connector_set;
        set.num_connectors = crtc_req->count_connectors;
        set.fb = fb;
        ret = __drm_mode_set_config_internal(&set, &ctx);

out:
        if (fb)
                drm_framebuffer_put(fb);

        if (connector_set) {
                for (i = 0; i < crtc_req->count_connectors; i++) {
                        if (connector_set[i])
                                drm_connector_put(connector_set[i]);
                }
        }
        kfree(connector_set);
        drm_mode_destroy(dev, mode);
        if (ret == -EDEADLK) {
                ret = drm_modeset_backoff(&ctx);
                if (!ret)
                        goto retry;
        }
        drm_modeset_drop_locks(&ctx);
        drm_modeset_acquire_fini(&ctx);
        mutex_unlock(&crtc->dev->mode_config.mutex);

        return ret;
}

int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj,
                               struct drm_property *property,
                               uint64_t value)
{
        int ret = -EINVAL;
        struct drm_crtc *crtc = obj_to_crtc(obj);

        if (crtc->funcs->set_property)
                ret = crtc->funcs->set_property(crtc, property, value);
        if (!ret)
                drm_object_property_set_value(obj, property, value);

        return ret;
}