mfd: wm8350-i2c: Make sure the i2c regmap functions are compiled

[linux/fpc-iii.git] / drivers / char / agp / generic.c

/*
 * AGPGART driver.
 * Copyright (C) 2004 Silicon Graphics, Inc.
 * Copyright (C) 2002-2005 Dave Jones.
 * Copyright (C) 1999 Jeff Hartmann.
 * Copyright (C) 1999 Precision Insight, Inc.
 * Copyright (C) 1999 Xi Graphics, Inc.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included
 * in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM,
 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
 * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * TODO:
 * - Allocate more than order 0 pages to avoid too much linear map splitting.
 */
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/pagemap.h>
#include <linux/miscdevice.h>
#include <linux/pm.h>
#include <linux/agp_backend.h>
#include <linux/vmalloc.h>
#include <linux/dma-mapping.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <asm/io.h>
#include <asm/cacheflush.h>
#include <asm/pgtable.h>
#include "agp.h"

__u32 *agp_gatt_table;
int agp_memory_reserved;

/*
 * Needed by the Nforce GART driver for the time being. Would be
 * nice to do this some other way instead of needing this export.
 */
EXPORT_SYMBOL_GPL(agp_memory_reserved);

/*
 * Generic routines for handling agp_memory structures -
 * They use the basic page allocation routines to do the brunt of the work.
 */

void agp_free_key(int key)
{
        if (key < 0)
                return;

        if (key < MAXKEY)
                clear_bit(key, agp_bridge->key_list);
}
EXPORT_SYMBOL(agp_free_key);


static int agp_get_key(void)
{
        int bit;

        bit = find_first_zero_bit(agp_bridge->key_list, MAXKEY);
        if (bit < MAXKEY) {
                set_bit(bit, agp_bridge->key_list);
                return bit;
        }
        return -1;
}

/*
 * Use kmalloc if possible for the page list. Otherwise fall back to
 * vmalloc. This speeds things up and also saves memory for small AGP
 * regions.
 */

void agp_alloc_page_array(size_t size, struct agp_memory *mem)
{
        mem->pages = NULL;

        if (size <= 2*PAGE_SIZE)
                mem->pages = kmalloc(size, GFP_KERNEL | __GFP_NOWARN);
        if (mem->pages == NULL) {
                mem->pages = vmalloc(size);
        }
}
EXPORT_SYMBOL(agp_alloc_page_array);

void agp_free_page_array(struct agp_memory *mem)
{
        if (is_vmalloc_addr(mem->pages)) {
                vfree(mem->pages);
        } else {
                kfree(mem->pages);
        }
}
EXPORT_SYMBOL(agp_free_page_array);


static struct agp_memory *agp_create_user_memory(unsigned long num_agp_pages)
{
        struct agp_memory *new;
        unsigned long alloc_size = num_agp_pages*sizeof(struct page *);

        if (INT_MAX/sizeof(struct page *) < num_agp_pages)
                return NULL;

        new = kzalloc(sizeof(struct agp_memory), GFP_KERNEL);
        if (new == NULL)
                return NULL;

        new->key = agp_get_key();

        if (new->key < 0) {
                kfree(new);
                return NULL;
        }

        agp_alloc_page_array(alloc_size, new);

        if (new->pages == NULL) {
                agp_free_key(new->key);
                kfree(new);
                return NULL;
        }
        new->num_scratch_pages = 0;
        return new;
}

struct agp_memory *agp_create_memory(int scratch_pages)
{
        struct agp_memory *new;

        new = kzalloc(sizeof(struct agp_memory), GFP_KERNEL);
        if (new == NULL)
                return NULL;

        new->key = agp_get_key();

        if (new->key < 0) {
                kfree(new);
                return NULL;
        }

        agp_alloc_page_array(PAGE_SIZE * scratch_pages, new);

        if (new->pages == NULL) {
                agp_free_key(new->key);
                kfree(new);
                return NULL;
        }
        new->num_scratch_pages = scratch_pages;
        new->type = AGP_NORMAL_MEMORY;
        return new;
}
EXPORT_SYMBOL(agp_create_memory);

/**
 *      agp_free_memory - free memory associated with an agp_memory pointer.
 *
 *      @curr:          agp_memory pointer to be freed.
 *
 *      It is the only function that can be called when the backend is not owned
 *      by the caller.  (So it can free memory on client death.)
 */
void agp_free_memory(struct agp_memory *curr)
{
        size_t i;

        if (curr == NULL)
                return;

        if (curr->is_bound)
                agp_unbind_memory(curr);

        if (curr->type >= AGP_USER_TYPES) {
                agp_generic_free_by_type(curr);
                return;
        }

        if (curr->type != 0) {
                curr->bridge->driver->free_by_type(curr);
                return;
        }
        if (curr->page_count != 0) {
                if (curr->bridge->driver->agp_destroy_pages) {
                        curr->bridge->driver->agp_destroy_pages(curr);
                } else {

                        for (i = 0; i < curr->page_count; i++) {
                                curr->bridge->driver->agp_destroy_page(
                                        curr->pages[i],
                                        AGP_PAGE_DESTROY_UNMAP);
                        }
                        for (i = 0; i < curr->page_count; i++) {
                                curr->bridge->driver->agp_destroy_page(
                                        curr->pages[i],
                                        AGP_PAGE_DESTROY_FREE);
                        }
                }
        }
        agp_free_key(curr->key);
        agp_free_page_array(curr);
        kfree(curr);
}
EXPORT_SYMBOL(agp_free_memory);

#define ENTRIES_PER_PAGE                (PAGE_SIZE / sizeof(unsigned long))

/**
 *      agp_allocate_memory  -  allocate a group of pages of a certain type.
 *
 *      @page_count:    size_t argument of the number of pages
 *      @type:  u32 argument of the type of memory to be allocated.
 *
 *      Every agp bridge device will allow you to allocate AGP_NORMAL_MEMORY which
 *      maps to physical ram.  Any other type is device dependent.
 *
 *      It returns NULL whenever memory is unavailable.
 */
struct agp_memory *agp_allocate_memory(struct agp_bridge_data *bridge,
                                        size_t page_count, u32 type)
{
        int scratch_pages;
        struct agp_memory *new;
        size_t i;
        int cur_memory;

        if (!bridge)
                return NULL;

        cur_memory = atomic_read(&bridge->current_memory_agp);
        if ((cur_memory + page_count > bridge->max_memory_agp) ||
            (cur_memory + page_count < page_count))
                return NULL;

        if (type >= AGP_USER_TYPES) {
                new = agp_generic_alloc_user(page_count, type);
                if (new)
                        new->bridge = bridge;
                return new;
        }

        if (type != 0) {
                new = bridge->driver->alloc_by_type(page_count, type);
                if (new)
                        new->bridge = bridge;
                return new;
        }

        scratch_pages = (page_count + ENTRIES_PER_PAGE - 1) / ENTRIES_PER_PAGE;

        new = agp_create_memory(scratch_pages);

        if (new == NULL)
                return NULL;

        if (bridge->driver->agp_alloc_pages) {
                if (bridge->driver->agp_alloc_pages(bridge, new, page_count)) {
                        agp_free_memory(new);
                        return NULL;
                }
                new->bridge = bridge;
                return new;
        }

        for (i = 0; i < page_count; i++) {
                struct page *page = bridge->driver->agp_alloc_page(bridge);

                if (page == NULL) {
                        agp_free_memory(new);
                        return NULL;
                }
                new->pages[i] = page;
                new->page_count++;
        }
        new->bridge = bridge;

        return new;
}
EXPORT_SYMBOL(agp_allocate_memory);


/* End - Generic routines for handling agp_memory structures */


static int agp_return_size(void)
{
        int current_size;
        void *temp;

        temp = agp_bridge->current_size;

        switch (agp_bridge->driver->size_type) {
        case U8_APER_SIZE:
                current_size = A_SIZE_8(temp)->size;
                break;
        case U16_APER_SIZE:
                current_size = A_SIZE_16(temp)->size;
                break;
        case U32_APER_SIZE:
                current_size = A_SIZE_32(temp)->size;
                break;
        case LVL2_APER_SIZE:
                current_size = A_SIZE_LVL2(temp)->size;
                break;
        case FIXED_APER_SIZE:
                current_size = A_SIZE_FIX(temp)->size;
                break;
        default:
                current_size = 0;
                break;
        }

        current_size -= (agp_memory_reserved / (1024*1024));
        if (current_size <0)
                current_size = 0;
        return current_size;
}


int agp_num_entries(void)
{
        int num_entries;
        void *temp;

        temp = agp_bridge->current_size;

        switch (agp_bridge->driver->size_type) {
        case U8_APER_SIZE:
                num_entries = A_SIZE_8(temp)->num_entries;
                break;
        case U16_APER_SIZE:
                num_entries = A_SIZE_16(temp)->num_entries;
                break;
        case U32_APER_SIZE:
                num_entries = A_SIZE_32(temp)->num_entries;
                break;
        case LVL2_APER_SIZE:
                num_entries = A_SIZE_LVL2(temp)->num_entries;
                break;
        case FIXED_APER_SIZE:
                num_entries = A_SIZE_FIX(temp)->num_entries;
                break;
        default:
                num_entries = 0;
                break;
        }

        num_entries -= agp_memory_reserved>>PAGE_SHIFT;
        if (num_entries<0)
                num_entries = 0;
        return num_entries;
}
EXPORT_SYMBOL_GPL(agp_num_entries);


/**
 *      agp_copy_info  -  copy bridge state information
 *
 *      @info:          agp_kern_info pointer.  The caller should insure that this pointer is valid.
 *
 *      This function copies information about the agp bridge device and the state of
 *      the agp backend into an agp_kern_info pointer.
 */
int agp_copy_info(struct agp_bridge_data *bridge, struct agp_kern_info *info)
{
        memset(info, 0, sizeof(struct agp_kern_info));
        if (!bridge) {
                info->chipset = NOT_SUPPORTED;
                return -EIO;
        }

        info->version.major = bridge->version->major;
        info->version.minor = bridge->version->minor;
        info->chipset = SUPPORTED;
        info->device = bridge->dev;
        if (bridge->mode & AGPSTAT_MODE_3_0)
                info->mode = bridge->mode & ~AGP3_RESERVED_MASK;
        else
                info->mode = bridge->mode & ~AGP2_RESERVED_MASK;
        info->aper_base = bridge->gart_bus_addr;
        info->aper_size = agp_return_size();
        info->max_memory = bridge->max_memory_agp;
        info->current_memory = atomic_read(&bridge->current_memory_agp);
        info->cant_use_aperture = bridge->driver->cant_use_aperture;
        info->vm_ops = bridge->vm_ops;
        info->page_mask = ~0UL;
        return 0;
}
EXPORT_SYMBOL(agp_copy_info);

/* End - Routine to copy over information structure */

/*
 * Routines for handling swapping of agp_memory into the GATT -
 * These routines take agp_memory and insert them into the GATT.
 * They call device specific routines to actually write to the GATT.
 */

/**
 *      agp_bind_memory  -  Bind an agp_memory structure into the GATT.
 *
 *      @curr:          agp_memory pointer
 *      @pg_start:      an offset into the graphics aperture translation table
 *
 *      It returns -EINVAL if the pointer == NULL.
 *      It returns -EBUSY if the area of the table requested is already in use.
 */
int agp_bind_memory(struct agp_memory *curr, off_t pg_start)
{
        int ret_val;

        if (curr == NULL)
                return -EINVAL;

        if (curr->is_bound) {
                printk(KERN_INFO PFX "memory %p is already bound!\n", curr);
                return -EINVAL;
        }
        if (!curr->is_flushed) {
                curr->bridge->driver->cache_flush();
                curr->is_flushed = true;
        }

        ret_val = curr->bridge->driver->insert_memory(curr, pg_start, curr->type);

        if (ret_val != 0)
                return ret_val;

        curr->is_bound = true;
        curr->pg_start = pg_start;
        spin_lock(&agp_bridge->mapped_lock);
        list_add(&curr->mapped_list, &agp_bridge->mapped_list);
        spin_unlock(&agp_bridge->mapped_lock);

        return 0;
}
EXPORT_SYMBOL(agp_bind_memory);


/**
 *      agp_unbind_memory  -  Removes an agp_memory structure from the GATT
 *
 * @curr:       agp_memory pointer to be removed from the GATT.
 *
 * It returns -EINVAL if this piece of agp_memory is not currently bound to
 * the graphics aperture translation table or if the agp_memory pointer == NULL
 */
int agp_unbind_memory(struct agp_memory *curr)
{
        int ret_val;

        if (curr == NULL)
                return -EINVAL;

        if (!curr->is_bound) {
                printk(KERN_INFO PFX "memory %p was not bound!\n", curr);
                return -EINVAL;
        }

        ret_val = curr->bridge->driver->remove_memory(curr, curr->pg_start, curr->type);

        if (ret_val != 0)
                return ret_val;

        curr->is_bound = false;
        curr->pg_start = 0;
        spin_lock(&curr->bridge->mapped_lock);
        list_del(&curr->mapped_list);
        spin_unlock(&curr->bridge->mapped_lock);
        return 0;
}
EXPORT_SYMBOL(agp_unbind_memory);


/* End - Routines for handling swapping of agp_memory into the GATT */


/* Generic Agp routines - Start */
static void agp_v2_parse_one(u32 *requested_mode, u32 *bridge_agpstat, u32 *vga_agpstat)
{
        u32 tmp;

        if (*requested_mode & AGP2_RESERVED_MASK) {
                printk(KERN_INFO PFX "reserved bits set (%x) in mode 0x%x. Fixed.\n",
                        *requested_mode & AGP2_RESERVED_MASK, *requested_mode);
                *requested_mode &= ~AGP2_RESERVED_MASK;
        }

        /*
         * Some dumb bridges are programmed to disobey the AGP2 spec.
         * This is likely a BIOS misprogramming rather than poweron default, or
         * it would be a lot more common.
         * https://bugs.freedesktop.org/show_bug.cgi?id=8816
         * AGPv2 spec 6.1.9 states:
         *   The RATE field indicates the data transfer rates supported by this
         *   device. A.G.P. devices must report all that apply.
         * Fix them up as best we can.
         */
        switch (*bridge_agpstat & 7) {
        case 4:
                *bridge_agpstat |= (AGPSTAT2_2X | AGPSTAT2_1X);
                printk(KERN_INFO PFX "BIOS bug. AGP bridge claims to only support x4 rate. "
                        "Fixing up support for x2 & x1\n");
                break;
        case 2:
                *bridge_agpstat |= AGPSTAT2_1X;
                printk(KERN_INFO PFX "BIOS bug. AGP bridge claims to only support x2 rate. "
                        "Fixing up support for x1\n");
                break;
        default:
                break;
        }

        /* Check the speed bits make sense. Only one should be set. */
        tmp = *requested_mode & 7;
        switch (tmp) {
                case 0:
                        printk(KERN_INFO PFX "%s tried to set rate=x0. Setting to x1 mode.\n", current->comm);
                        *requested_mode |= AGPSTAT2_1X;
                        break;
                case 1:
                case 2:
                        break;
                case 3:
                        *requested_mode &= ~(AGPSTAT2_1X);      /* rate=2 */
                        break;
                case 4:
                        break;
                case 5:
                case 6:
                case 7:
                        *requested_mode &= ~(AGPSTAT2_1X|AGPSTAT2_2X); /* rate=4*/
                        break;
        }

        /* disable SBA if it's not supported */
        if (!((*bridge_agpstat & AGPSTAT_SBA) && (*vga_agpstat & AGPSTAT_SBA) && (*requested_mode & AGPSTAT_SBA)))
                *bridge_agpstat &= ~AGPSTAT_SBA;

        /* Set rate */
        if (!((*bridge_agpstat & AGPSTAT2_4X) && (*vga_agpstat & AGPSTAT2_4X) && (*requested_mode & AGPSTAT2_4X)))
                *bridge_agpstat &= ~AGPSTAT2_4X;

        if (!((*bridge_agpstat & AGPSTAT2_2X) && (*vga_agpstat & AGPSTAT2_2X) && (*requested_mode & AGPSTAT2_2X)))
                *bridge_agpstat &= ~AGPSTAT2_2X;

        if (!((*bridge_agpstat & AGPSTAT2_1X) && (*vga_agpstat & AGPSTAT2_1X) && (*requested_mode & AGPSTAT2_1X)))
                *bridge_agpstat &= ~AGPSTAT2_1X;

        /* Now we know what mode it should be, clear out the unwanted bits. */
        if (*bridge_agpstat & AGPSTAT2_4X)
                *bridge_agpstat &= ~(AGPSTAT2_1X | AGPSTAT2_2X);        /* 4X */

        if (*bridge_agpstat & AGPSTAT2_2X)
                *bridge_agpstat &= ~(AGPSTAT2_1X | AGPSTAT2_4X);        /* 2X */

        if (*bridge_agpstat & AGPSTAT2_1X)
                *bridge_agpstat &= ~(AGPSTAT2_2X | AGPSTAT2_4X);        /* 1X */

        /* Apply any errata. */
        if (agp_bridge->flags & AGP_ERRATA_FASTWRITES)
                *bridge_agpstat &= ~AGPSTAT_FW;

        if (agp_bridge->flags & AGP_ERRATA_SBA)
                *bridge_agpstat &= ~AGPSTAT_SBA;

        if (agp_bridge->flags & AGP_ERRATA_1X) {
                *bridge_agpstat &= ~(AGPSTAT2_2X | AGPSTAT2_4X);
                *bridge_agpstat |= AGPSTAT2_1X;
        }

        /* If we've dropped down to 1X, disable fast writes. */
        if (*bridge_agpstat & AGPSTAT2_1X)
                *bridge_agpstat &= ~AGPSTAT_FW;
}

/*
 * requested_mode = Mode requested by (typically) X.
 * bridge_agpstat = PCI_AGP_STATUS from agp bridge.
 * vga_agpstat = PCI_AGP_STATUS from graphic card.
 */
static void agp_v3_parse_one(u32 *requested_mode, u32 *bridge_agpstat, u32 *vga_agpstat)
{
        u32 origbridge=*bridge_agpstat, origvga=*vga_agpstat;
        u32 tmp;

        if (*requested_mode & AGP3_RESERVED_MASK) {
                printk(KERN_INFO PFX "reserved bits set (%x) in mode 0x%x. Fixed.\n",
                        *requested_mode & AGP3_RESERVED_MASK, *requested_mode);
                *requested_mode &= ~AGP3_RESERVED_MASK;
        }

        /* Check the speed bits make sense. */
        tmp = *requested_mode & 7;
        if (tmp == 0) {
                printk(KERN_INFO PFX "%s tried to set rate=x0. Setting to AGP3 x4 mode.\n", current->comm);
                *requested_mode |= AGPSTAT3_4X;
        }
        if (tmp >= 3) {
                printk(KERN_INFO PFX "%s tried to set rate=x%d. Setting to AGP3 x8 mode.\n", current->comm, tmp * 4);
                *requested_mode = (*requested_mode & ~7) | AGPSTAT3_8X;
        }

        /* ARQSZ - Set the value to the maximum one.
         * Don't allow the mode register to override values. */
        *bridge_agpstat = ((*bridge_agpstat & ~AGPSTAT_ARQSZ) |
                max_t(u32,(*bridge_agpstat & AGPSTAT_ARQSZ),(*vga_agpstat & AGPSTAT_ARQSZ)));

        /* Calibration cycle.
         * Don't allow the mode register to override values. */
        *bridge_agpstat = ((*bridge_agpstat & ~AGPSTAT_CAL_MASK) |
                min_t(u32,(*bridge_agpstat & AGPSTAT_CAL_MASK),(*vga_agpstat & AGPSTAT_CAL_MASK)));

        /* SBA *must* be supported for AGP v3 */
        *bridge_agpstat |= AGPSTAT_SBA;

        /*
         * Set speed.
         * Check for invalid speeds. This can happen when applications
         * written before the AGP 3.0 standard pass AGP2.x modes to AGP3 hardware
         */
        if (*requested_mode & AGPSTAT_MODE_3_0) {
                /*
                 * Caller hasn't a clue what it is doing. Bridge is in 3.0 mode,
                 * have been passed a 3.0 mode, but with 2.x speed bits set.
                 * AGP2.x 4x -> AGP3.0 4x.
                 */
                if (*requested_mode & AGPSTAT2_4X) {
                        printk(KERN_INFO PFX "%s passes broken AGP3 flags (%x). Fixed.\n",
                                                current->comm, *requested_mode);
                        *requested_mode &= ~AGPSTAT2_4X;
                        *requested_mode |= AGPSTAT3_4X;
                }
        } else {
                /*
                 * The caller doesn't know what they are doing. We are in 3.0 mode,
                 * but have been passed an AGP 2.x mode.
                 * Convert AGP 1x,2x,4x -> AGP 3.0 4x.
                 */
                printk(KERN_INFO PFX "%s passes broken AGP2 flags (%x) in AGP3 mode. Fixed.\n",
                                        current->comm, *requested_mode);
                *requested_mode &= ~(AGPSTAT2_4X | AGPSTAT2_2X | AGPSTAT2_1X);
                *requested_mode |= AGPSTAT3_4X;
        }

        if (*requested_mode & AGPSTAT3_8X) {
                if (!(*bridge_agpstat & AGPSTAT3_8X)) {
                        *bridge_agpstat &= ~(AGPSTAT3_8X | AGPSTAT3_RSVD);
                        *bridge_agpstat |= AGPSTAT3_4X;
                        printk(KERN_INFO PFX "%s requested AGPx8 but bridge not capable.\n", current->comm);
                        return;
                }
                if (!(*vga_agpstat & AGPSTAT3_8X)) {
                        *bridge_agpstat &= ~(AGPSTAT3_8X | AGPSTAT3_RSVD);
                        *bridge_agpstat |= AGPSTAT3_4X;
                        printk(KERN_INFO PFX "%s requested AGPx8 but graphic card not capable.\n", current->comm);
                        return;
                }
                /* All set, bridge & device can do AGP x8*/
                *bridge_agpstat &= ~(AGPSTAT3_4X | AGPSTAT3_RSVD);
                goto done;

        } else if (*requested_mode & AGPSTAT3_4X) {
                *bridge_agpstat &= ~(AGPSTAT3_8X | AGPSTAT3_RSVD);
                *bridge_agpstat |= AGPSTAT3_4X;
                goto done;

        } else {

                /*
                 * If we didn't specify an AGP mode, we see if both
                 * the graphics card, and the bridge can do x8, and use if so.
                 * If not, we fall back to x4 mode.
                 */
                if ((*bridge_agpstat & AGPSTAT3_8X) && (*vga_agpstat & AGPSTAT3_8X)) {
                        printk(KERN_INFO PFX "No AGP mode specified. Setting to highest mode "
                                "supported by bridge & card (x8).\n");
                        *bridge_agpstat &= ~(AGPSTAT3_4X | AGPSTAT3_RSVD);
                        *vga_agpstat &= ~(AGPSTAT3_4X | AGPSTAT3_RSVD);
                } else {
                        printk(KERN_INFO PFX "Fell back to AGPx4 mode because ");
                        if (!(*bridge_agpstat & AGPSTAT3_8X)) {
                                printk(KERN_INFO PFX "bridge couldn't do x8. bridge_agpstat:%x (orig=%x)\n",
                                        *bridge_agpstat, origbridge);
                                *bridge_agpstat &= ~(AGPSTAT3_8X | AGPSTAT3_RSVD);
                                *bridge_agpstat |= AGPSTAT3_4X;
                        }
                        if (!(*vga_agpstat & AGPSTAT3_8X)) {
                                printk(KERN_INFO PFX "graphics card couldn't do x8. vga_agpstat:%x (orig=%x)\n",
                                        *vga_agpstat, origvga);
                                *vga_agpstat &= ~(AGPSTAT3_8X | AGPSTAT3_RSVD);
                                *vga_agpstat |= AGPSTAT3_4X;
                        }
                }
        }

done:
        /* Apply any errata. */
        if (agp_bridge->flags & AGP_ERRATA_FASTWRITES)
                *bridge_agpstat &= ~AGPSTAT_FW;

        if (agp_bridge->flags & AGP_ERRATA_SBA)
                *bridge_agpstat &= ~AGPSTAT_SBA;

        if (agp_bridge->flags & AGP_ERRATA_1X) {
                *bridge_agpstat &= ~(AGPSTAT2_2X | AGPSTAT2_4X);
                *bridge_agpstat |= AGPSTAT2_1X;
        }
}


/**
 * agp_collect_device_status - determine correct agp_cmd from various agp_stat's
 * @bridge: an agp_bridge_data struct allocated for the AGP host bridge.
 * @requested_mode: requested agp_stat from userspace (Typically from X)
 * @bridge_agpstat: current agp_stat from AGP bridge.
 *
 * This function will hunt for an AGP graphics card, and try to match
 * the requested mode to the capabilities of both the bridge and the card.
 */
u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 requested_mode, u32 bridge_agpstat)
{
        struct pci_dev *device = NULL;
        u32 vga_agpstat;
        u8 cap_ptr;

        for (;;) {
                device = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, device);
                if (!device) {
                        printk(KERN_INFO PFX "Couldn't find an AGP VGA controller.\n");
                        return 0;
                }
                cap_ptr = pci_find_capability(device, PCI_CAP_ID_AGP);
                if (cap_ptr)
                        break;
        }

        /*
         * Ok, here we have a AGP device. Disable impossible
         * settings, and adjust the readqueue to the minimum.
         */
        pci_read_config_dword(device, cap_ptr+PCI_AGP_STATUS, &vga_agpstat);

        /* adjust RQ depth */
        bridge_agpstat = ((bridge_agpstat & ~AGPSTAT_RQ_DEPTH) |
             min_t(u32, (requested_mode & AGPSTAT_RQ_DEPTH),
                 min_t(u32, (bridge_agpstat & AGPSTAT_RQ_DEPTH), (vga_agpstat & AGPSTAT_RQ_DEPTH))));

        /* disable FW if it's not supported */
        if (!((bridge_agpstat & AGPSTAT_FW) &&
                 (vga_agpstat & AGPSTAT_FW) &&
                 (requested_mode & AGPSTAT_FW)))
                bridge_agpstat &= ~AGPSTAT_FW;

        /* Check to see if we are operating in 3.0 mode */
        if (agp_bridge->mode & AGPSTAT_MODE_3_0)
                agp_v3_parse_one(&requested_mode, &bridge_agpstat, &vga_agpstat);
        else
                agp_v2_parse_one(&requested_mode, &bridge_agpstat, &vga_agpstat);

        pci_dev_put(device);
        return bridge_agpstat;
}
EXPORT_SYMBOL(agp_collect_device_status);


void agp_device_command(u32 bridge_agpstat, bool agp_v3)
{
        struct pci_dev *device = NULL;
        int mode;

        mode = bridge_agpstat & 0x7;
        if (agp_v3)
                mode *= 4;

        for_each_pci_dev(device) {
                u8 agp = pci_find_capability(device, PCI_CAP_ID_AGP);
                if (!agp)
                        continue;

                dev_info(&device->dev, "putting AGP V%d device into %dx mode\n",
                         agp_v3 ? 3 : 2, mode);
                pci_write_config_dword(device, agp + PCI_AGP_COMMAND, bridge_agpstat);
        }
}
EXPORT_SYMBOL(agp_device_command);


void get_agp_version(struct agp_bridge_data *bridge)
{
        u32 ncapid;

        /* Exit early if already set by errata workarounds. */
        if (bridge->major_version != 0)
                return;

        pci_read_config_dword(bridge->dev, bridge->capndx, &ncapid);
        bridge->major_version = (ncapid >> AGP_MAJOR_VERSION_SHIFT) & 0xf;
        bridge->minor_version = (ncapid >> AGP_MINOR_VERSION_SHIFT) & 0xf;
}
EXPORT_SYMBOL(get_agp_version);


void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode)
{
        u32 bridge_agpstat, temp;

        get_agp_version(agp_bridge);

        dev_info(&agp_bridge->dev->dev, "AGP %d.%d bridge\n",
                 agp_bridge->major_version, agp_bridge->minor_version);

        pci_read_config_dword(agp_bridge->dev,
                      agp_bridge->capndx + PCI_AGP_STATUS, &bridge_agpstat);

        bridge_agpstat = agp_collect_device_status(agp_bridge, requested_mode, bridge_agpstat);
        if (bridge_agpstat == 0)
                /* Something bad happened. FIXME: Return error code? */
                return;

        bridge_agpstat |= AGPSTAT_AGP_ENABLE;

        /* Do AGP version specific frobbing. */
        if (bridge->major_version >= 3) {
                if (bridge->mode & AGPSTAT_MODE_3_0) {
                        /* If we have 3.5, we can do the isoch stuff. */
                        if (bridge->minor_version >= 5)
                                agp_3_5_enable(bridge);
                        agp_device_command(bridge_agpstat, true);
                        return;
                } else {
                    /* Disable calibration cycle in RX91<1> when not in AGP3.0 mode of operation.*/
                    bridge_agpstat &= ~(7<<10) ;
                    pci_read_config_dword(bridge->dev,
                                        bridge->capndx+AGPCTRL, &temp);
                    temp |= (1<<9);
                    pci_write_config_dword(bridge->dev,
                                        bridge->capndx+AGPCTRL, temp);

                    dev_info(&bridge->dev->dev, "bridge is in legacy mode, falling back to 2.x\n");
                }
        }

        /* AGP v<3 */
        agp_device_command(bridge_agpstat, false);
}
EXPORT_SYMBOL(agp_generic_enable);


int agp_generic_create_gatt_table(struct agp_bridge_data *bridge)
{
        char *table;
        char *table_end;
        int size;
        int page_order;
        int num_entries;
        int i;
        void *temp;
        struct page *page;

        /* The generic routines can't handle 2 level gatt's */
        if (bridge->driver->size_type == LVL2_APER_SIZE)
                return -EINVAL;

        table = NULL;
        i = bridge->aperture_size_idx;
        temp = bridge->current_size;
        size = page_order = num_entries = 0;

        if (bridge->driver->size_type != FIXED_APER_SIZE) {
                do {
                        switch (bridge->driver->size_type) {
                        case U8_APER_SIZE:
                                size = A_SIZE_8(temp)->size;
                                page_order =
                                    A_SIZE_8(temp)->page_order;
                                num_entries =
                                    A_SIZE_8(temp)->num_entries;
                                break;
                        case U16_APER_SIZE:
                                size = A_SIZE_16(temp)->size;
                                page_order = A_SIZE_16(temp)->page_order;
                                num_entries = A_SIZE_16(temp)->num_entries;
                                break;
                        case U32_APER_SIZE:
                                size = A_SIZE_32(temp)->size;
                                page_order = A_SIZE_32(temp)->page_order;
                                num_entries = A_SIZE_32(temp)->num_entries;
                                break;
                                /* This case will never really happen. */
                        case FIXED_APER_SIZE:
                        case LVL2_APER_SIZE:
                        default:
                                size = page_order = num_entries = 0;
                                break;
                        }

                        table = alloc_gatt_pages(page_order);

                        if (table == NULL) {
                                i++;
                                switch (bridge->driver->size_type) {
                                case U8_APER_SIZE:
                                        bridge->current_size = A_IDX8(bridge);
                                        break;
                                case U16_APER_SIZE:
                                        bridge->current_size = A_IDX16(bridge);
                                        break;
                                case U32_APER_SIZE:
                                        bridge->current_size = A_IDX32(bridge);
                                        break;
                                /* These cases will never really happen. */
                                case FIXED_APER_SIZE:
                                case LVL2_APER_SIZE:
                                default:
                                        break;
                                }
                                temp = bridge->current_size;
                        } else {
                                bridge->aperture_size_idx = i;
                        }
                } while (!table && (i < bridge->driver->num_aperture_sizes));
        } else {
                size = ((struct aper_size_info_fixed *) temp)->size;
                page_order = ((struct aper_size_info_fixed *) temp)->page_order;
                num_entries = ((struct aper_size_info_fixed *) temp)->num_entries;
                table = alloc_gatt_pages(page_order);
        }

        if (table == NULL)
                return -ENOMEM;

        table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1);

        for (page = virt_to_page(table); page <= virt_to_page(table_end); page++)
                SetPageReserved(page);

        bridge->gatt_table_real = (u32 *) table;
        agp_gatt_table = (void *)table;

        bridge->driver->cache_flush();
#ifdef CONFIG_X86
        if (set_memory_uc((unsigned long)table, 1 << page_order))
                printk(KERN_WARNING "Could not set GATT table memory to UC!\n");

        bridge->gatt_table = (u32 __iomem *)table;
#else
        bridge->gatt_table = ioremap_nocache(virt_to_phys(table),
                                        (PAGE_SIZE * (1 << page_order)));
        bridge->driver->cache_flush();
#endif

        if (bridge->gatt_table == NULL) {
                for (page = virt_to_page(table); page <= virt_to_page(table_end); page++)
                        ClearPageReserved(page);

                free_gatt_pages(table, page_order);

                return -ENOMEM;
        }
        bridge->gatt_bus_addr = virt_to_phys(bridge->gatt_table_real);

        /* AK: bogus, should encode addresses > 4GB */
        for (i = 0; i < num_entries; i++) {
                writel(bridge->scratch_page, bridge->gatt_table+i);
                readl(bridge->gatt_table+i);    /* PCI Posting. */
        }

        return 0;
}
EXPORT_SYMBOL(agp_generic_create_gatt_table);

int agp_generic_free_gatt_table(struct agp_bridge_data *bridge)
{
        int page_order;
        char *table, *table_end;
        void *temp;
        struct page *page;

        temp = bridge->current_size;

        switch (bridge->driver->size_type) {
        case U8_APER_SIZE:
                page_order = A_SIZE_8(temp)->page_order;
                break;
        case U16_APER_SIZE:
                page_order = A_SIZE_16(temp)->page_order;
                break;
        case U32_APER_SIZE:
                page_order = A_SIZE_32(temp)->page_order;
                break;
        case FIXED_APER_SIZE:
                page_order = A_SIZE_FIX(temp)->page_order;
                break;
        case LVL2_APER_SIZE:
                /* The generic routines can't deal with 2 level gatt's */
                return -EINVAL;
        default:
                page_order = 0;
                break;
        }

        /* Do not worry about freeing memory, because if this is
         * called, then all agp memory is deallocated and removed
         * from the table. */

#ifdef CONFIG_X86
        set_memory_wb((unsigned long)bridge->gatt_table, 1 << page_order);
#else
        iounmap(bridge->gatt_table);
#endif
        table = (char *) bridge->gatt_table_real;
        table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1);

        for (page = virt_to_page(table); page <= virt_to_page(table_end); page++)
                ClearPageReserved(page);

        free_gatt_pages(bridge->gatt_table_real, page_order);

        agp_gatt_table = NULL;
        bridge->gatt_table = NULL;
        bridge->gatt_table_real = NULL;
        bridge->gatt_bus_addr = 0;

        return 0;
}
EXPORT_SYMBOL(agp_generic_free_gatt_table);


int agp_generic_insert_memory(struct agp_memory * mem, off_t pg_start, int type)
{
        int num_entries;
        size_t i;
        off_t j;
        void *temp;
        struct agp_bridge_data *bridge;
        int mask_type;

        bridge = mem->bridge;
        if (!bridge)
                return -EINVAL;

        if (mem->page_count == 0)
                return 0;

        temp = bridge->current_size;

        switch (bridge->driver->size_type) {
        case U8_APER_SIZE:
                num_entries = A_SIZE_8(temp)->num_entries;
                break;
        case U16_APER_SIZE:
                num_entries = A_SIZE_16(temp)->num_entries;
                break;
        case U32_APER_SIZE:
                num_entries = A_SIZE_32(temp)->num_entries;
                break;
        case FIXED_APER_SIZE:
                num_entries = A_SIZE_FIX(temp)->num_entries;
                break;
        case LVL2_APER_SIZE:
                /* The generic routines can't deal with 2 level gatt's */
                return -EINVAL;
        default:
                num_entries = 0;
                break;
        }

        num_entries -= agp_memory_reserved/PAGE_SIZE;
        if (num_entries < 0) num_entries = 0;

        if (type != mem->type)
                return -EINVAL;

        mask_type = bridge->driver->agp_type_to_mask_type(bridge, type);
        if (mask_type != 0) {
                /* The generic routines know nothing of memory types */
                return -EINVAL;
        }

        if (((pg_start + mem->page_count) > num_entries) ||
            ((pg_start + mem->page_count) < pg_start))
                return -EINVAL;

        j = pg_start;

        while (j < (pg_start + mem->page_count)) {
                if (!PGE_EMPTY(bridge, readl(bridge->gatt_table+j)))
                        return -EBUSY;
                j++;
        }

        if (!mem->is_flushed) {
                bridge->driver->cache_flush();
                mem->is_flushed = true;
        }

        for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
                writel(bridge->driver->mask_memory(bridge,
                                                   page_to_phys(mem->pages[i]),
                                                   mask_type),
                       bridge->gatt_table+j);
        }
        readl(bridge->gatt_table+j-1);  /* PCI Posting. */

        bridge->driver->tlb_flush(mem);
        return 0;
}
EXPORT_SYMBOL(agp_generic_insert_memory);


int agp_generic_remove_memory(struct agp_memory *mem, off_t pg_start, int type)
{
        size_t i;
        struct agp_bridge_data *bridge;
        int mask_type, num_entries;

        bridge = mem->bridge;
        if (!bridge)
                return -EINVAL;

        if (mem->page_count == 0)
                return 0;

        if (type != mem->type)
                return -EINVAL;

        num_entries = agp_num_entries();
        if (((pg_start + mem->page_count) > num_entries) ||
            ((pg_start + mem->page_count) < pg_start))
                return -EINVAL;

        mask_type = bridge->driver->agp_type_to_mask_type(bridge, type);
        if (mask_type != 0) {
                /* The generic routines know nothing of memory types */
                return -EINVAL;
        }

        /* AK: bogus, should encode addresses > 4GB */
        for (i = pg_start; i < (mem->page_count + pg_start); i++) {
                writel(bridge->scratch_page, bridge->gatt_table+i);
        }
        readl(bridge->gatt_table+i-1);  /* PCI Posting. */

        bridge->driver->tlb_flush(mem);
        return 0;
}
EXPORT_SYMBOL(agp_generic_remove_memory);

struct agp_memory *agp_generic_alloc_by_type(size_t page_count, int type)
{
        return NULL;
}
EXPORT_SYMBOL(agp_generic_alloc_by_type);

void agp_generic_free_by_type(struct agp_memory *curr)
{
        agp_free_page_array(curr);
        agp_free_key(curr->key);
        kfree(curr);
}
EXPORT_SYMBOL(agp_generic_free_by_type);

struct agp_memory *agp_generic_alloc_user(size_t page_count, int type)
{
        struct agp_memory *new;
        int i;
        int pages;

        pages = (page_count + ENTRIES_PER_PAGE - 1) / ENTRIES_PER_PAGE;
        new = agp_create_user_memory(page_count);
        if (new == NULL)
                return NULL;

        for (i = 0; i < page_count; i++)
                new->pages[i] = NULL;
        new->page_count = 0;
        new->type = type;
        new->num_scratch_pages = pages;

        return new;
}
EXPORT_SYMBOL(agp_generic_alloc_user);

/*
 * Basic Page Allocation Routines -
 * These routines handle page allocation and by default they reserve the allocated
 * memory.  They also handle incrementing the current_memory_agp value, Which is checked
 * against a maximum value.
 */

int agp_generic_alloc_pages(struct agp_bridge_data *bridge, struct agp_memory *mem, size_t num_pages)
{
        struct page * page;
        int i, ret = -ENOMEM;

        for (i = 0; i < num_pages; i++) {
                page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO);
                /* agp_free_memory() needs gart address */
                if (page == NULL)
                        goto out;

#ifndef CONFIG_X86
                map_page_into_agp(page);
#endif
                get_page(page);
                atomic_inc(&agp_bridge->current_memory_agp);

                mem->pages[i] = page;
                mem->page_count++;
        }

#ifdef CONFIG_X86
        set_pages_array_uc(mem->pages, num_pages);
#endif
        ret = 0;
out:
        return ret;
}
EXPORT_SYMBOL(agp_generic_alloc_pages);

struct page *agp_generic_alloc_page(struct agp_bridge_data *bridge)
{
        struct page * page;

        page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO);
        if (page == NULL)
                return NULL;

        map_page_into_agp(page);

        get_page(page);
        atomic_inc(&agp_bridge->current_memory_agp);
        return page;
}
EXPORT_SYMBOL(agp_generic_alloc_page);

void agp_generic_destroy_pages(struct agp_memory *mem)
{
        int i;
        struct page *page;

        if (!mem)
                return;

#ifdef CONFIG_X86
        set_pages_array_wb(mem->pages, mem->page_count);
#endif

        for (i = 0; i < mem->page_count; i++) {
                page = mem->pages[i];

#ifndef CONFIG_X86
                unmap_page_from_agp(page);
#endif
                put_page(page);
                __free_page(page);
                atomic_dec(&agp_bridge->current_memory_agp);
                mem->pages[i] = NULL;
        }
}
EXPORT_SYMBOL(agp_generic_destroy_pages);

void agp_generic_destroy_page(struct page *page, int flags)
{
        if (page == NULL)
                return;

        if (flags & AGP_PAGE_DESTROY_UNMAP)
                unmap_page_from_agp(page);

        if (flags & AGP_PAGE_DESTROY_FREE) {
                put_page(page);
                __free_page(page);
                atomic_dec(&agp_bridge->current_memory_agp);
        }
}
EXPORT_SYMBOL(agp_generic_destroy_page);

/* End Basic Page Allocation Routines */


/**
 * agp_enable  -  initialise the agp point-to-point connection.
 *
 * @mode:       agp mode register value to configure with.
 */
void agp_enable(struct agp_bridge_data *bridge, u32 mode)
{
        if (!bridge)
                return;
        bridge->driver->agp_enable(bridge, mode);
}
EXPORT_SYMBOL(agp_enable);

/* When we remove the global variable agp_bridge from all drivers
 * then agp_alloc_bridge and agp_generic_find_bridge need to be updated
 */

struct agp_bridge_data *agp_generic_find_bridge(struct pci_dev *pdev)
{
        if (list_empty(&agp_bridges))
                return NULL;

        return agp_bridge;
}

static void ipi_handler(void *null)
{
        flush_agp_cache();
}

void global_cache_flush(void)
{
        if (on_each_cpu(ipi_handler, NULL, 1) != 0)
                panic(PFX "timed out waiting for the other CPUs!\n");
}
EXPORT_SYMBOL(global_cache_flush);

unsigned long agp_generic_mask_memory(struct agp_bridge_data *bridge,
                                      dma_addr_t addr, int type)
{
        /* memory type is ignored in the generic routine */
        if (bridge->driver->masks)
                return addr | bridge->driver->masks[0].mask;
        else
                return addr;
}
EXPORT_SYMBOL(agp_generic_mask_memory);

int agp_generic_type_to_mask_type(struct agp_bridge_data *bridge,
                                  int type)
{
        if (type >= AGP_USER_TYPES)
                return 0;
        return type;
}
EXPORT_SYMBOL(agp_generic_type_to_mask_type);

/*
 * These functions are implemented according to the AGPv3 spec,
 * which covers implementation details that had previously been
 * left open.
 */

int agp3_generic_fetch_size(void)
{
        u16 temp_size;
        int i;
        struct aper_size_info_16 *values;

        pci_read_config_word(agp_bridge->dev, agp_bridge->capndx+AGPAPSIZE, &temp_size);
        values = A_SIZE_16(agp_bridge->driver->aperture_sizes);

        for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
                if (temp_size == values[i].size_value) {
                        agp_bridge->previous_size =
                                agp_bridge->current_size = (void *) (values + i);

                        agp_bridge->aperture_size_idx = i;
                        return values[i].size;
                }
        }
        return 0;
}
EXPORT_SYMBOL(agp3_generic_fetch_size);

void agp3_generic_tlbflush(struct agp_memory *mem)
{
        u32 ctrl;
        pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, &ctrl);
        pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, ctrl & ~AGPCTRL_GTLBEN);
        pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, ctrl);
}
EXPORT_SYMBOL(agp3_generic_tlbflush);

int agp3_generic_configure(void)
{
        u32 temp;
        struct aper_size_info_16 *current_size;

        current_size = A_SIZE_16(agp_bridge->current_size);

        pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
        agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);

        /* set aperture size */
        pci_write_config_word(agp_bridge->dev, agp_bridge->capndx+AGPAPSIZE, current_size->size_value);
        /* set gart pointer */
        pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPGARTLO, agp_bridge->gatt_bus_addr);
        /* enable aperture and GTLB */
        pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, &temp);
        pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, temp | AGPCTRL_APERENB | AGPCTRL_GTLBEN);
        return 0;
}
EXPORT_SYMBOL(agp3_generic_configure);

void agp3_generic_cleanup(void)
{
        u32 ctrl;
        pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, &ctrl);
        pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, ctrl & ~AGPCTRL_APERENB);
}
EXPORT_SYMBOL(agp3_generic_cleanup);

const struct aper_size_info_16 agp3_generic_sizes[AGP_GENERIC_SIZES_ENTRIES] =
{
        {4096, 1048576, 10,0x000},
        {2048,  524288, 9, 0x800},
        {1024,  262144, 8, 0xc00},
        { 512,  131072, 7, 0xe00},
        { 256,   65536, 6, 0xf00},
        { 128,   32768, 5, 0xf20},
        {  64,   16384, 4, 0xf30},
        {  32,    8192, 3, 0xf38},
        {  16,    4096, 2, 0xf3c},
        {   8,    2048, 1, 0xf3e},
        {   4,    1024, 0, 0xf3f}
};
EXPORT_SYMBOL(agp3_generic_sizes);