mfd: wm8350-i2c: Make sure the i2c regmap functions are compiled
[linux/fpc-iii.git] / drivers / char / ds1620.c
blob0fae5296e311cc819fc071356c77c07d8de74d93
1 /*
2 * linux/drivers/char/ds1620.c: Dallas Semiconductors DS1620
3 * thermometer driver (as used in the Rebel.com NetWinder)
4 */
5 #include <linux/module.h>
6 #include <linux/miscdevice.h>
7 #include <linux/delay.h>
8 #include <linux/proc_fs.h>
9 #include <linux/seq_file.h>
10 #include <linux/capability.h>
11 #include <linux/init.h>
12 #include <linux/mutex.h>
14 #include <mach/hardware.h>
15 #include <asm/mach-types.h>
16 #include <asm/uaccess.h>
17 #include <asm/therm.h>
19 #ifdef CONFIG_PROC_FS
20 /* define for /proc interface */
21 #define THERM_USE_PROC
22 #endif
24 /* Definitions for DS1620 chip */
25 #define THERM_START_CONVERT 0xee
26 #define THERM_RESET 0xaf
27 #define THERM_READ_CONFIG 0xac
28 #define THERM_READ_TEMP 0xaa
29 #define THERM_READ_TL 0xa2
30 #define THERM_READ_TH 0xa1
31 #define THERM_WRITE_CONFIG 0x0c
32 #define THERM_WRITE_TL 0x02
33 #define THERM_WRITE_TH 0x01
35 #define CFG_CPU 2
36 #define CFG_1SHOT 1
38 static DEFINE_MUTEX(ds1620_mutex);
39 static const char *fan_state[] = { "off", "on", "on (hardwired)" };
42 * Start of NetWinder specifics
43 * Note! We have to hold the gpio lock with IRQs disabled over the
44 * whole of our transaction to the Dallas chip, since there is a
45 * chance that the WaveArtist driver could touch these bits to
46 * enable or disable the speaker.
48 extern unsigned int system_rev;
50 static inline void netwinder_ds1620_set_clk(int clk)
52 nw_gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0);
55 static inline void netwinder_ds1620_set_data(int dat)
57 nw_gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0);
60 static inline int netwinder_ds1620_get_data(void)
62 return nw_gpio_read() & GPIO_DATA;
65 static inline void netwinder_ds1620_set_data_dir(int dir)
67 nw_gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0);
70 static inline void netwinder_ds1620_reset(void)
72 nw_cpld_modify(CPLD_DS_ENABLE, 0);
73 nw_cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE);
76 static inline void netwinder_lock(unsigned long *flags)
78 raw_spin_lock_irqsave(&nw_gpio_lock, *flags);
81 static inline void netwinder_unlock(unsigned long *flags)
83 raw_spin_unlock_irqrestore(&nw_gpio_lock, *flags);
86 static inline void netwinder_set_fan(int i)
88 unsigned long flags;
90 raw_spin_lock_irqsave(&nw_gpio_lock, flags);
91 nw_gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0);
92 raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
95 static inline int netwinder_get_fan(void)
97 if ((system_rev & 0xf000) == 0x4000)
98 return FAN_ALWAYS_ON;
100 return (nw_gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF;
104 * End of NetWinder specifics
107 static void ds1620_send_bits(int nr, int value)
109 int i;
111 for (i = 0; i < nr; i++) {
112 netwinder_ds1620_set_data(value & 1);
113 netwinder_ds1620_set_clk(0);
114 udelay(1);
115 netwinder_ds1620_set_clk(1);
116 udelay(1);
118 value >>= 1;
122 static unsigned int ds1620_recv_bits(int nr)
124 unsigned int value = 0, mask = 1;
125 int i;
127 netwinder_ds1620_set_data(0);
129 for (i = 0; i < nr; i++) {
130 netwinder_ds1620_set_clk(0);
131 udelay(1);
133 if (netwinder_ds1620_get_data())
134 value |= mask;
136 mask <<= 1;
138 netwinder_ds1620_set_clk(1);
139 udelay(1);
142 return value;
145 static void ds1620_out(int cmd, int bits, int value)
147 unsigned long flags;
149 netwinder_lock(&flags);
150 netwinder_ds1620_set_clk(1);
151 netwinder_ds1620_set_data_dir(0);
152 netwinder_ds1620_reset();
154 udelay(1);
156 ds1620_send_bits(8, cmd);
157 if (bits)
158 ds1620_send_bits(bits, value);
160 udelay(1);
162 netwinder_ds1620_reset();
163 netwinder_unlock(&flags);
165 msleep(20);
168 static unsigned int ds1620_in(int cmd, int bits)
170 unsigned long flags;
171 unsigned int value;
173 netwinder_lock(&flags);
174 netwinder_ds1620_set_clk(1);
175 netwinder_ds1620_set_data_dir(0);
176 netwinder_ds1620_reset();
178 udelay(1);
180 ds1620_send_bits(8, cmd);
182 netwinder_ds1620_set_data_dir(1);
183 value = ds1620_recv_bits(bits);
185 netwinder_ds1620_reset();
186 netwinder_unlock(&flags);
188 return value;
191 static int cvt_9_to_int(unsigned int val)
193 if (val & 0x100)
194 val |= 0xfffffe00;
196 return val;
199 static void ds1620_write_state(struct therm *therm)
201 ds1620_out(THERM_WRITE_CONFIG, 8, CFG_CPU);
202 ds1620_out(THERM_WRITE_TL, 9, therm->lo);
203 ds1620_out(THERM_WRITE_TH, 9, therm->hi);
204 ds1620_out(THERM_START_CONVERT, 0, 0);
207 static void ds1620_read_state(struct therm *therm)
209 therm->lo = cvt_9_to_int(ds1620_in(THERM_READ_TL, 9));
210 therm->hi = cvt_9_to_int(ds1620_in(THERM_READ_TH, 9));
213 static int ds1620_open(struct inode *inode, struct file *file)
215 return nonseekable_open(inode, file);
218 static ssize_t
219 ds1620_read(struct file *file, char __user *buf, size_t count, loff_t *ptr)
221 signed int cur_temp;
222 signed char cur_temp_degF;
224 cur_temp = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9)) >> 1;
226 /* convert to Fahrenheit, as per wdt.c */
227 cur_temp_degF = (cur_temp * 9) / 5 + 32;
229 if (copy_to_user(buf, &cur_temp_degF, 1))
230 return -EFAULT;
232 return 1;
235 static int
236 ds1620_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
238 struct therm therm;
239 union {
240 struct therm __user *therm;
241 int __user *i;
242 } uarg;
243 int i;
245 uarg.i = (int __user *)arg;
247 switch(cmd) {
248 case CMD_SET_THERMOSTATE:
249 case CMD_SET_THERMOSTATE2:
250 if (!capable(CAP_SYS_ADMIN))
251 return -EPERM;
253 if (cmd == CMD_SET_THERMOSTATE) {
254 if (get_user(therm.hi, uarg.i))
255 return -EFAULT;
256 therm.lo = therm.hi - 3;
257 } else {
258 if (copy_from_user(&therm, uarg.therm, sizeof(therm)))
259 return -EFAULT;
262 therm.lo <<= 1;
263 therm.hi <<= 1;
265 ds1620_write_state(&therm);
266 break;
268 case CMD_GET_THERMOSTATE:
269 case CMD_GET_THERMOSTATE2:
270 ds1620_read_state(&therm);
272 therm.lo >>= 1;
273 therm.hi >>= 1;
275 if (cmd == CMD_GET_THERMOSTATE) {
276 if (put_user(therm.hi, uarg.i))
277 return -EFAULT;
278 } else {
279 if (copy_to_user(uarg.therm, &therm, sizeof(therm)))
280 return -EFAULT;
282 break;
284 case CMD_GET_TEMPERATURE:
285 case CMD_GET_TEMPERATURE2:
286 i = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9));
288 if (cmd == CMD_GET_TEMPERATURE)
289 i >>= 1;
291 return put_user(i, uarg.i) ? -EFAULT : 0;
293 case CMD_GET_STATUS:
294 i = ds1620_in(THERM_READ_CONFIG, 8) & 0xe3;
296 return put_user(i, uarg.i) ? -EFAULT : 0;
298 case CMD_GET_FAN:
299 i = netwinder_get_fan();
301 return put_user(i, uarg.i) ? -EFAULT : 0;
303 case CMD_SET_FAN:
304 if (!capable(CAP_SYS_ADMIN))
305 return -EPERM;
307 if (get_user(i, uarg.i))
308 return -EFAULT;
310 netwinder_set_fan(i);
311 break;
313 default:
314 return -ENOIOCTLCMD;
317 return 0;
320 static long
321 ds1620_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
323 int ret;
325 mutex_lock(&ds1620_mutex);
326 ret = ds1620_ioctl(file, cmd, arg);
327 mutex_unlock(&ds1620_mutex);
329 return ret;
332 #ifdef THERM_USE_PROC
333 static int ds1620_proc_therm_show(struct seq_file *m, void *v)
335 struct therm th;
336 int temp;
338 ds1620_read_state(&th);
339 temp = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9));
341 seq_printf(m, "Thermostat: HI %i.%i, LOW %i.%i; temperature: %i.%i C, fan %s\n",
342 th.hi >> 1, th.hi & 1 ? 5 : 0,
343 th.lo >> 1, th.lo & 1 ? 5 : 0,
344 temp >> 1, temp & 1 ? 5 : 0,
345 fan_state[netwinder_get_fan()]);
346 return 0;
349 static int ds1620_proc_therm_open(struct inode *inode, struct file *file)
351 return single_open(file, ds1620_proc_therm_show, NULL);
354 static const struct file_operations ds1620_proc_therm_fops = {
355 .open = ds1620_proc_therm_open,
356 .read = seq_read,
357 .llseek = seq_lseek,
358 .release = single_release,
360 #endif
362 static const struct file_operations ds1620_fops = {
363 .owner = THIS_MODULE,
364 .open = ds1620_open,
365 .read = ds1620_read,
366 .unlocked_ioctl = ds1620_unlocked_ioctl,
367 .llseek = no_llseek,
370 static struct miscdevice ds1620_miscdev = {
371 TEMP_MINOR,
372 "temp",
373 &ds1620_fops
376 static int __init ds1620_init(void)
378 int ret;
379 struct therm th, th_start;
381 if (!machine_is_netwinder())
382 return -ENODEV;
384 ds1620_out(THERM_RESET, 0, 0);
385 ds1620_out(THERM_WRITE_CONFIG, 8, CFG_CPU);
386 ds1620_out(THERM_START_CONVERT, 0, 0);
389 * Trigger the fan to start by setting
390 * temperature high point low. This kicks
391 * the fan into action.
393 ds1620_read_state(&th);
394 th_start.lo = 0;
395 th_start.hi = 1;
396 ds1620_write_state(&th_start);
398 msleep(2000);
400 ds1620_write_state(&th);
402 ret = misc_register(&ds1620_miscdev);
403 if (ret < 0)
404 return ret;
406 #ifdef THERM_USE_PROC
407 if (!proc_create("therm", 0, NULL, &ds1620_proc_therm_fops))
408 printk(KERN_ERR "therm: unable to register /proc/therm\n");
409 #endif
411 ds1620_read_state(&th);
412 ret = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9));
414 printk(KERN_INFO "Thermostat: high %i.%i, low %i.%i, "
415 "current %i.%i C, fan %s.\n",
416 th.hi >> 1, th.hi & 1 ? 5 : 0,
417 th.lo >> 1, th.lo & 1 ? 5 : 0,
418 ret >> 1, ret & 1 ? 5 : 0,
419 fan_state[netwinder_get_fan()]);
421 return 0;
424 static void __exit ds1620_exit(void)
426 #ifdef THERM_USE_PROC
427 remove_proc_entry("therm", NULL);
428 #endif
429 misc_deregister(&ds1620_miscdev);
432 module_init(ds1620_init);
433 module_exit(ds1620_exit);
435 MODULE_LICENSE("GPL");