drivers/cpufreq/s3c2416-cpufreq.c

   1 /*
   2  * S3C2416/2450 CPUfreq Support
   3  *
   4  * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
   5  *
   6  * based on s3c64xx_cpufreq.c
   7  *
   8  * Copyright 2009 Wolfson Microelectronics plc
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/types.h>
  17 #include <linux/init.h>
  18 #include <linux/cpufreq.h>
  19 #include <linux/clk.h>
  20 #include <linux/err.h>
  21 #include <linux/regulator/consumer.h>
  22 #include <linux/reboot.h>
  23 #include <linux/module.h>
  24
  25 static DEFINE_MUTEX(cpufreq_lock);
  26
  27 struct s3c2416_data {
  28         struct clk *armdiv;
  29         struct clk *armclk;
  30         struct clk *hclk;
  31
  32         unsigned long regulator_latency;
  33 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
  34         struct regulator *vddarm;
  35 #endif
  36
  37         struct cpufreq_frequency_table *freq_table;
  38
  39         bool is_dvs;
  40         bool disable_dvs;
  41 };
  42
  43 static struct s3c2416_data s3c2416_cpufreq;
  44
  45 struct s3c2416_dvfs {
  46         unsigned int vddarm_min;
  47         unsigned int vddarm_max;
  48 };
  49
  50 /* pseudo-frequency for dvs mode */
  51 #define FREQ_DVS        132333
  52
  53 /* frequency to sleep and reboot in
  54  * it's essential to leave dvs, as some boards do not reconfigure the
  55  * regulator on reboot
  56  */
  57 #define FREQ_SLEEP      133333
  58
  59 /* Sources for the ARMCLK */
  60 #define SOURCE_HCLK     0
  61 #define SOURCE_ARMDIV   1
  62
  63 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
  64 /* S3C2416 only supports changing the voltage in the dvs-mode.
  65  * Voltages down to 1.0V seem to work, so we take what the regulator
  66  * can get us.
  67  */
  68 static struct s3c2416_dvfs s3c2416_dvfs_table[] = {
  69         [SOURCE_HCLK] = {  950000, 1250000 },
  70         [SOURCE_ARMDIV] = { 1250000, 1350000 },
  71 };
  72 #endif
  73
  74 static struct cpufreq_frequency_table s3c2416_freq_table[] = {
  75         { SOURCE_HCLK, FREQ_DVS },
  76         { SOURCE_ARMDIV, 133333 },
  77         { SOURCE_ARMDIV, 266666 },
  78         { SOURCE_ARMDIV, 400000 },
  79         { 0, CPUFREQ_TABLE_END },
  80 };
  81
  82 static struct cpufreq_frequency_table s3c2450_freq_table[] = {
  83         { SOURCE_HCLK, FREQ_DVS },
  84         { SOURCE_ARMDIV, 133500 },
  85         { SOURCE_ARMDIV, 267000 },
  86         { SOURCE_ARMDIV, 534000 },
  87         { 0, CPUFREQ_TABLE_END },
  88 };
  89
  90 static int s3c2416_cpufreq_verify_speed(struct cpufreq_policy *policy)
  91 {
  92         struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
  93
  94         if (policy->cpu != 0)
  95                 return -EINVAL;
  96
  97         return cpufreq_frequency_table_verify(policy, s3c_freq->freq_table);
  98 }
  99
 100 static unsigned int s3c2416_cpufreq_get_speed(unsigned int cpu)
 101 {
 102         struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
 103
 104         if (cpu != 0)
 105                 return 0;
 106
 107         /* return our pseudo-frequency when in dvs mode */
 108         if (s3c_freq->is_dvs)
 109                 return FREQ_DVS;
 110
 111         return clk_get_rate(s3c_freq->armclk) / 1000;
 112 }
 113
 114 static int s3c2416_cpufreq_set_armdiv(struct s3c2416_data *s3c_freq,
 115                                       unsigned int freq)
 116 {
 117         int ret;
 118
 119         if (clk_get_rate(s3c_freq->armdiv) / 1000 != freq) {
 120                 ret = clk_set_rate(s3c_freq->armdiv, freq * 1000);
 121                 if (ret < 0) {
 122                         pr_err("cpufreq: Failed to set armdiv rate %dkHz: %d\n",
 123                                freq, ret);
 124                         return ret;
 125                 }
 126         }
 127
 128         return 0;
 129 }
 130
 131 static int s3c2416_cpufreq_enter_dvs(struct s3c2416_data *s3c_freq, int idx)
 132 {
 133 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
 134         struct s3c2416_dvfs *dvfs;
 135 #endif
 136         int ret;
 137
 138         if (s3c_freq->is_dvs) {
 139                 pr_debug("cpufreq: already in dvs mode, nothing to do\n");
 140                 return 0;
 141         }
 142
 143         pr_debug("cpufreq: switching armclk to hclk (%lukHz)\n",
 144                  clk_get_rate(s3c_freq->hclk) / 1000);
 145         ret = clk_set_parent(s3c_freq->armclk, s3c_freq->hclk);
 146         if (ret < 0) {
 147                 pr_err("cpufreq: Failed to switch armclk to hclk: %d\n", ret);
 148                 return ret;
 149         }
 150
 151 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
 152         /* changing the core voltage is only allowed when in dvs mode */
 153         if (s3c_freq->vddarm) {
 154                 dvfs = &s3c2416_dvfs_table[idx];
 155
 156                 pr_debug("cpufreq: setting regulator to %d-%d\n",
 157                          dvfs->vddarm_min, dvfs->vddarm_max);
 158                 ret = regulator_set_voltage(s3c_freq->vddarm,
 159                                             dvfs->vddarm_min,
 160                                             dvfs->vddarm_max);
 161
 162                 /* when lowering the voltage failed, there is nothing to do */
 163                 if (ret != 0)
 164                         pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
 165         }
 166 #endif
 167
 168         s3c_freq->is_dvs = 1;
 169
 170         return 0;
 171 }
 172
 173 static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx)
 174 {
 175 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
 176         struct s3c2416_dvfs *dvfs;
 177 #endif
 178         int ret;
 179
 180         if (!s3c_freq->is_dvs) {
 181                 pr_debug("cpufreq: not in dvs mode, so can't leave\n");
 182                 return 0;
 183         }
 184
 185 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
 186         if (s3c_freq->vddarm) {
 187                 dvfs = &s3c2416_dvfs_table[idx];
 188
 189                 pr_debug("cpufreq: setting regulator to %d-%d\n",
 190                          dvfs->vddarm_min, dvfs->vddarm_max);
 191                 ret = regulator_set_voltage(s3c_freq->vddarm,
 192                                             dvfs->vddarm_min,
 193                                             dvfs->vddarm_max);
 194                 if (ret != 0) {
 195                         pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
 196                         return ret;
 197                 }
 198         }
 199 #endif
 200
 201         /* force armdiv to hclk frequency for transition from dvs*/
 202         if (clk_get_rate(s3c_freq->armdiv) > clk_get_rate(s3c_freq->hclk)) {
 203                 pr_debug("cpufreq: force armdiv to hclk frequency (%lukHz)\n",
 204                          clk_get_rate(s3c_freq->hclk) / 1000);
 205                 ret = s3c2416_cpufreq_set_armdiv(s3c_freq,
 206                                         clk_get_rate(s3c_freq->hclk) / 1000);
 207                 if (ret < 0) {
 208                         pr_err("cpufreq: Failed to set the armdiv to %lukHz: %d\n",
 209                                clk_get_rate(s3c_freq->hclk) / 1000, ret);
 210                         return ret;
 211                 }
 212         }
 213
 214         pr_debug("cpufreq: switching armclk parent to armdiv (%lukHz)\n",
 215                         clk_get_rate(s3c_freq->armdiv) / 1000);
 216
 217         ret = clk_set_parent(s3c_freq->armclk, s3c_freq->armdiv);
 218         if (ret < 0) {
 219                 pr_err("cpufreq: Failed to switch armclk clock parent to armdiv: %d\n",
 220                        ret);
 221                 return ret;
 222         }
 223
 224         s3c_freq->is_dvs = 0;
 225
 226         return 0;
 227 }
 228
 229 static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy,
 230                                       unsigned int target_freq,
 231                                       unsigned int relation)
 232 {
 233         struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
 234         struct cpufreq_freqs freqs;
 235         int idx, ret, to_dvs = 0;
 236         unsigned int i;
 237
 238         mutex_lock(&cpufreq_lock);
 239
 240         pr_debug("cpufreq: to %dKHz, relation %d\n", target_freq, relation);
 241
 242         ret = cpufreq_frequency_table_target(policy, s3c_freq->freq_table,
 243                                              target_freq, relation, &i);
 244         if (ret != 0)
 245                 goto out;
 246
 247         idx = s3c_freq->freq_table[i].driver_data;
 248
 249         if (idx == SOURCE_HCLK)
 250                 to_dvs = 1;
 251
 252         /* switching to dvs when it's not allowed */
 253         if (to_dvs && s3c_freq->disable_dvs) {
 254                 pr_debug("cpufreq: entering dvs mode not allowed\n");
 255                 ret = -EINVAL;
 256                 goto out;
 257         }
 258
 259         freqs.flags = 0;
 260         freqs.old = s3c_freq->is_dvs ? FREQ_DVS
 261                                      : clk_get_rate(s3c_freq->armclk) / 1000;
 262
 263         /* When leavin dvs mode, always switch the armdiv to the hclk rate
 264          * The S3C2416 has stability issues when switching directly to
 265          * higher frequencies.
 266          */
 267         freqs.new = (s3c_freq->is_dvs && !to_dvs)
 268                                 ? clk_get_rate(s3c_freq->hclk) / 1000
 269                                 : s3c_freq->freq_table[i].frequency;
 270
 271         pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
 272
 273         if (!to_dvs && freqs.old == freqs.new)
 274                 goto out;
 275
 276         cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 277
 278         if (to_dvs) {
 279                 pr_debug("cpufreq: enter dvs\n");
 280                 ret = s3c2416_cpufreq_enter_dvs(s3c_freq, idx);
 281         } else if (s3c_freq->is_dvs) {
 282                 pr_debug("cpufreq: leave dvs\n");
 283                 ret = s3c2416_cpufreq_leave_dvs(s3c_freq, idx);
 284         } else {
 285                 pr_debug("cpufreq: change armdiv to %dkHz\n", freqs.new);
 286                 ret = s3c2416_cpufreq_set_armdiv(s3c_freq, freqs.new);
 287         }
 288
 289         cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 290
 291 out:
 292         mutex_unlock(&cpufreq_lock);
 293
 294         return ret;
 295 }
 296
 297 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
 298 static void s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
 299 {
 300         int count, v, i, found;
 301         struct cpufreq_frequency_table *freq;
 302         struct s3c2416_dvfs *dvfs;
 303
 304         count = regulator_count_voltages(s3c_freq->vddarm);
 305         if (count < 0) {
 306                 pr_err("cpufreq: Unable to check supported voltages\n");
 307                 return;
 308         }
 309
 310         freq = s3c_freq->freq_table;
 311         while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
 312                 if (freq->frequency == CPUFREQ_ENTRY_INVALID)
 313                         continue;
 314
 315                 dvfs = &s3c2416_dvfs_table[freq->driver_data];
 316                 found = 0;
 317
 318                 /* Check only the min-voltage, more is always ok on S3C2416 */
 319                 for (i = 0; i < count; i++) {
 320                         v = regulator_list_voltage(s3c_freq->vddarm, i);
 321                         if (v >= dvfs->vddarm_min)
 322                                 found = 1;
 323                 }
 324
 325                 if (!found) {
 326                         pr_debug("cpufreq: %dkHz unsupported by regulator\n",
 327                                  freq->frequency);
 328                         freq->frequency = CPUFREQ_ENTRY_INVALID;
 329                 }
 330
 331                 freq++;
 332         }
 333
 334         /* Guessed */
 335         s3c_freq->regulator_latency = 1 * 1000 * 1000;
 336 }
 337 #endif
 338
 339 static int s3c2416_cpufreq_reboot_notifier_evt(struct notifier_block *this,
 340                                                unsigned long event, void *ptr)
 341 {
 342         struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
 343         int ret;
 344
 345         mutex_lock(&cpufreq_lock);
 346
 347         /* disable further changes */
 348         s3c_freq->disable_dvs = 1;
 349
 350         mutex_unlock(&cpufreq_lock);
 351
 352         /* some boards don't reconfigure the regulator on reboot, which
 353          * could lead to undervolting the cpu when the clock is reset.
 354          * Therefore we always leave the DVS mode on reboot.
 355          */
 356         if (s3c_freq->is_dvs) {
 357                 pr_debug("cpufreq: leave dvs on reboot\n");
 358                 ret = cpufreq_driver_target(cpufreq_cpu_get(0), FREQ_SLEEP, 0);
 359                 if (ret < 0)
 360                         return NOTIFY_BAD;
 361         }
 362
 363         return NOTIFY_DONE;
 364 }
 365
 366 static struct notifier_block s3c2416_cpufreq_reboot_notifier = {
 367         .notifier_call = s3c2416_cpufreq_reboot_notifier_evt,
 368 };
 369
 370 static int s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
 371 {
 372         struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
 373         struct cpufreq_frequency_table *freq;
 374         struct clk *msysclk;
 375         unsigned long rate;
 376         int ret;
 377
 378         if (policy->cpu != 0)
 379                 return -EINVAL;
 380
 381         msysclk = clk_get(NULL, "msysclk");
 382         if (IS_ERR(msysclk)) {
 383                 ret = PTR_ERR(msysclk);
 384                 pr_err("cpufreq: Unable to obtain msysclk: %d\n", ret);
 385                 return ret;
 386         }
 387
 388         /*
 389          * S3C2416 and S3C2450 share the same processor-ID and also provide no
 390          * other means to distinguish them other than through the rate of
 391          * msysclk. On S3C2416 msysclk runs at 800MHz and on S3C2450 at 533MHz.
 392          */
 393         rate = clk_get_rate(msysclk);
 394         if (rate == 800 * 1000 * 1000) {
 395                 pr_info("cpufreq: msysclk running at %lukHz, using S3C2416 frequency table\n",
 396                         rate / 1000);
 397                 s3c_freq->freq_table = s3c2416_freq_table;
 398                 policy->cpuinfo.max_freq = 400000;
 399         } else if (rate / 1000 == 534000) {
 400                 pr_info("cpufreq: msysclk running at %lukHz, using S3C2450 frequency table\n",
 401                         rate / 1000);
 402                 s3c_freq->freq_table = s3c2450_freq_table;
 403                 policy->cpuinfo.max_freq = 534000;
 404         }
 405
 406         /* not needed anymore */
 407         clk_put(msysclk);
 408
 409         if (s3c_freq->freq_table == NULL) {
 410                 pr_err("cpufreq: No frequency information for this CPU, msysclk at %lukHz\n",
 411                        rate / 1000);
 412                 return -ENODEV;
 413         }
 414
 415         s3c_freq->is_dvs = 0;
 416
 417         s3c_freq->armdiv = clk_get(NULL, "armdiv");
 418         if (IS_ERR(s3c_freq->armdiv)) {
 419                 ret = PTR_ERR(s3c_freq->armdiv);
 420                 pr_err("cpufreq: Unable to obtain ARMDIV: %d\n", ret);
 421                 return ret;
 422         }
 423
 424         s3c_freq->hclk = clk_get(NULL, "hclk");
 425         if (IS_ERR(s3c_freq->hclk)) {
 426                 ret = PTR_ERR(s3c_freq->hclk);
 427                 pr_err("cpufreq: Unable to obtain HCLK: %d\n", ret);
 428                 goto err_hclk;
 429         }
 430
 431         /* chech hclk rate, we only support the common 133MHz for now
 432          * hclk could also run at 66MHz, but this not often used
 433          */
 434         rate = clk_get_rate(s3c_freq->hclk);
 435         if (rate < 133 * 1000 * 1000) {
 436                 pr_err("cpufreq: HCLK not at 133MHz\n");
 437                 clk_put(s3c_freq->hclk);
 438                 ret = -EINVAL;
 439                 goto err_armclk;
 440         }
 441
 442         s3c_freq->armclk = clk_get(NULL, "armclk");
 443         if (IS_ERR(s3c_freq->armclk)) {
 444                 ret = PTR_ERR(s3c_freq->armclk);
 445                 pr_err("cpufreq: Unable to obtain ARMCLK: %d\n", ret);
 446                 goto err_armclk;
 447         }
 448
 449 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
 450         s3c_freq->vddarm = regulator_get(NULL, "vddarm");
 451         if (IS_ERR(s3c_freq->vddarm)) {
 452                 ret = PTR_ERR(s3c_freq->vddarm);
 453                 pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
 454                 goto err_vddarm;
 455         }
 456
 457         s3c2416_cpufreq_cfg_regulator(s3c_freq);
 458 #else
 459         s3c_freq->regulator_latency = 0;
 460 #endif
 461
 462         freq = s3c_freq->freq_table;
 463         while (freq->frequency != CPUFREQ_TABLE_END) {
 464                 /* special handling for dvs mode */
 465                 if (freq->driver_data == 0) {
 466                         if (!s3c_freq->hclk) {
 467                                 pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n",
 468                                          freq->frequency);
 469                                 freq->frequency = CPUFREQ_ENTRY_INVALID;
 470                         } else {
 471                                 freq++;
 472                                 continue;
 473                         }
 474                 }
 475
 476                 /* Check for frequencies we can generate */
 477                 rate = clk_round_rate(s3c_freq->armdiv,
 478                                       freq->frequency * 1000);
 479                 rate /= 1000;
 480                 if (rate != freq->frequency) {
 481                         pr_debug("cpufreq: %dkHz unsupported by clock (clk_round_rate return %lu)\n",
 482                                  freq->frequency, rate);
 483                         freq->frequency = CPUFREQ_ENTRY_INVALID;
 484                 }
 485
 486                 freq++;
 487         }
 488
 489         policy->cur = clk_get_rate(s3c_freq->armclk) / 1000;
 490
 491         /* Datasheet says PLL stabalisation time must be at least 300us,
 492          * so but add some fudge. (reference in LOCKCON0 register description)
 493          */
 494         policy->cpuinfo.transition_latency = (500 * 1000) +
 495                                              s3c_freq->regulator_latency;
 496
 497         ret = cpufreq_frequency_table_cpuinfo(policy, s3c_freq->freq_table);
 498         if (ret)
 499                 goto err_freq_table;
 500
 501         cpufreq_frequency_table_get_attr(s3c_freq->freq_table, 0);
 502
 503         register_reboot_notifier(&s3c2416_cpufreq_reboot_notifier);
 504
 505         return 0;
 506
 507 err_freq_table:
 508 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
 509         regulator_put(s3c_freq->vddarm);
 510 err_vddarm:
 511 #endif
 512         clk_put(s3c_freq->armclk);
 513 err_armclk:
 514         clk_put(s3c_freq->hclk);
 515 err_hclk:
 516         clk_put(s3c_freq->armdiv);
 517
 518         return ret;
 519 }
 520
 521 static struct freq_attr *s3c2416_cpufreq_attr[] = {
 522         &cpufreq_freq_attr_scaling_available_freqs,
 523         NULL,
 524 };
 525
 526 static struct cpufreq_driver s3c2416_cpufreq_driver = {
 527         .flags          = 0,
 528         .verify         = s3c2416_cpufreq_verify_speed,
 529         .target         = s3c2416_cpufreq_set_target,
 530         .get            = s3c2416_cpufreq_get_speed,
 531         .init           = s3c2416_cpufreq_driver_init,
 532         .name           = "s3c2416",
 533         .attr           = s3c2416_cpufreq_attr,
 534 };
 535
 536 static int __init s3c2416_cpufreq_init(void)
 537 {
 538         return cpufreq_register_driver(&s3c2416_cpufreq_driver);
 539 }
 540 module_init(s3c2416_cpufreq_init);