mfd: wm8350-i2c: Make sure the i2c regmap functions are compiled

[linux/fpc-iii.git] / drivers / edac / amd64_edac.h

/*
 * AMD64 class Memory Controller kernel module
 *
 * Copyright (c) 2009 SoftwareBitMaker.
 * Copyright (c) 2009 Advanced Micro Devices, Inc.
 *
 * This file may be distributed under the terms of the
 * GNU General Public License.
 *
 *      Originally Written by Thayne Harbaugh
 *
 *      Changes by Douglas "norsk" Thompson  <dougthompson@xmission.com>:
 *              - K8 CPU Revision D and greater support
 *
 *      Changes by Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com>:
 *              - Module largely rewritten, with new (and hopefully correct)
 *              code for dealing with node and chip select interleaving,
 *              various code cleanup, and bug fixes
 *              - Added support for memory hoisting using DRAM hole address
 *              register
 *
 *      Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>:
 *              -K8 Rev (1207) revision support added, required Revision
 *              specific mini-driver code to support Rev F as well as
 *              prior revisions
 *
 *      Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>:
 *              -Family 10h revision support added. New PCI Device IDs,
 *              indicating new changes. Actual registers modified
 *              were slight, less than the Rev E to Rev F transition
 *              but changing the PCI Device ID was the proper thing to
 *              do, as it provides for almost automactic family
 *              detection. The mods to Rev F required more family
 *              information detection.
 *
 *      Changes/Fixes by Borislav Petkov <bp@alien8.de>:
 *              - misc fixes and code cleanups
 *
 * This module is based on the following documents
 * (available from http://www.amd.com/):
 *
 *      Title:  BIOS and Kernel Developer's Guide for AMD Athlon 64 and AMD
 *              Opteron Processors
 *      AMD publication #: 26094
 *`     Revision: 3.26
 *
 *      Title:  BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh
 *              Processors
 *      AMD publication #: 32559
 *      Revision: 3.00
 *      Issue Date: May 2006
 *
 *      Title:  BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h
 *              Processors
 *      AMD publication #: 31116
 *      Revision: 3.00
 *      Issue Date: September 07, 2007
 *
 * Sections in the first 2 documents are no longer in sync with each other.
 * The Family 10h BKDG was totally re-written from scratch with a new
 * presentation model.
 * Therefore, comments that refer to a Document section might be off.
 */

#include <linux/module.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/slab.h>
#include <linux/mmzone.h>
#include <linux/edac.h>
#include <asm/msr.h>
#include "edac_core.h"
#include "mce_amd.h"

#define amd64_debug(fmt, arg...) \
        edac_printk(KERN_DEBUG, "amd64", fmt, ##arg)

#define amd64_info(fmt, arg...) \
        edac_printk(KERN_INFO, "amd64", fmt, ##arg)

#define amd64_notice(fmt, arg...) \
        edac_printk(KERN_NOTICE, "amd64", fmt, ##arg)

#define amd64_warn(fmt, arg...) \
        edac_printk(KERN_WARNING, "amd64", fmt, ##arg)

#define amd64_err(fmt, arg...) \
        edac_printk(KERN_ERR, "amd64", fmt, ##arg)

#define amd64_mc_warn(mci, fmt, arg...) \
        edac_mc_chipset_printk(mci, KERN_WARNING, "amd64", fmt, ##arg)

#define amd64_mc_err(mci, fmt, arg...) \
        edac_mc_chipset_printk(mci, KERN_ERR, "amd64", fmt, ##arg)

/*
 * Throughout the comments in this code, the following terms are used:
 *
 *      SysAddr, DramAddr, and InputAddr
 *
 *  These terms come directly from the amd64 documentation
 * (AMD publication #26094).  They are defined as follows:
 *
 *     SysAddr:
 *         This is a physical address generated by a CPU core or a device
 *         doing DMA.  If generated by a CPU core, a SysAddr is the result of
 *         a virtual to physical address translation by the CPU core's address
 *         translation mechanism (MMU).
 *
 *     DramAddr:
 *         A DramAddr is derived from a SysAddr by subtracting an offset that
 *         depends on which node the SysAddr maps to and whether the SysAddr
 *         is within a range affected by memory hoisting.  The DRAM Base
 *         (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers
 *         determine which node a SysAddr maps to.
 *
 *         If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr
 *         is within the range of addresses specified by this register, then
 *         a value x from the DHAR is subtracted from the SysAddr to produce a
 *         DramAddr.  Here, x represents the base address for the node that
 *         the SysAddr maps to plus an offset due to memory hoisting.  See
 *         section 3.4.8 and the comments in amd64_get_dram_hole_info() and
 *         sys_addr_to_dram_addr() below for more information.
 *
 *         If the SysAddr is not affected by the DHAR then a value y is
 *         subtracted from the SysAddr to produce a DramAddr.  Here, y is the
 *         base address for the node that the SysAddr maps to.  See section
 *         3.4.4 and the comments in sys_addr_to_dram_addr() below for more
 *         information.
 *
 *     InputAddr:
 *         A DramAddr is translated to an InputAddr before being passed to the
 *         memory controller for the node that the DramAddr is associated
 *         with.  The memory controller then maps the InputAddr to a csrow.
 *         If node interleaving is not in use, then the InputAddr has the same
 *         value as the DramAddr.  Otherwise, the InputAddr is produced by
 *         discarding the bits used for node interleaving from the DramAddr.
 *         See section 3.4.4 for more information.
 *
 *         The memory controller for a given node uses its DRAM CS Base and
 *         DRAM CS Mask registers to map an InputAddr to a csrow.  See
 *         sections 3.5.4 and 3.5.5 for more information.
 */

#define EDAC_AMD64_VERSION              "3.4.0"
#define EDAC_MOD_STR                    "amd64_edac"

/* Extended Model from CPUID, for CPU Revision numbers */
#define K8_REV_D                        1
#define K8_REV_E                        2
#define K8_REV_F                        4

/* Hardware limit on ChipSelect rows per MC and processors per system */
#define NUM_CHIPSELECTS                 8
#define DRAM_RANGES                     8

#define ON true
#define OFF false

/*
 * Create a contiguous bitmask starting at bit position @lo and ending at
 * position @hi. For example
 *
 * GENMASK(21, 39) gives us the 64bit vector 0x000000ffffe00000.
 */
#define GENMASK(lo, hi)                 (((1ULL << ((hi) - (lo) + 1)) - 1) << (lo))

/*
 * PCI-defined configuration space registers
 */
#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b
#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c
#define PCI_DEVICE_ID_AMD_15H_NB_F1     0x1601
#define PCI_DEVICE_ID_AMD_15H_NB_F2     0x1602
#define PCI_DEVICE_ID_AMD_16H_NB_F1     0x1531
#define PCI_DEVICE_ID_AMD_16H_NB_F2     0x1532
#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F1 0x1581
#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F2 0x1582

/*
 * Function 1 - Address Map
 */
#define DRAM_BASE_LO                    0x40
#define DRAM_LIMIT_LO                   0x44

/*
 * F15 M30h D18F1x2[1C:00]
 */
#define DRAM_CONT_BASE                  0x200
#define DRAM_CONT_LIMIT                 0x204

/*
 * F15 M30h D18F1x2[4C:40]
 */
#define DRAM_CONT_HIGH_OFF              0x240

#define dram_rw(pvt, i)                 ((u8)(pvt->ranges[i].base.lo & 0x3))
#define dram_intlv_sel(pvt, i)          ((u8)((pvt->ranges[i].lim.lo >> 8) & 0x7))
#define dram_dst_node(pvt, i)           ((u8)(pvt->ranges[i].lim.lo & 0x7))

#define DHAR                            0xf0
#define dhar_mem_hoist_valid(pvt)       ((pvt)->dhar & BIT(1))
#define dhar_base(pvt)                  ((pvt)->dhar & 0xff000000)
#define k8_dhar_offset(pvt)             (((pvt)->dhar & 0x0000ff00) << 16)

                                        /* NOTE: Extra mask bit vs K8 */
#define f10_dhar_offset(pvt)            (((pvt)->dhar & 0x0000ff80) << 16)

#define DCT_CFG_SEL                     0x10C

#define DRAM_LOCAL_NODE_BASE            0x120
#define DRAM_LOCAL_NODE_LIM             0x124

#define DRAM_BASE_HI                    0x140
#define DRAM_LIMIT_HI                   0x144


/*
 * Function 2 - DRAM controller
 */
#define DCSB0                           0x40
#define DCSB1                           0x140
#define DCSB_CS_ENABLE                  BIT(0)

#define DCSM0                           0x60
#define DCSM1                           0x160

#define csrow_enabled(i, dct, pvt)      ((pvt)->csels[(dct)].csbases[(i)] & DCSB_CS_ENABLE)

#define DBAM0                           0x80
#define DBAM1                           0x180

/* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */
#define DBAM_DIMM(i, reg)               ((((reg) >> (4*(i)))) & 0xF)

#define DBAM_MAX_VALUE                  11

#define DCLR0                           0x90
#define DCLR1                           0x190
#define REVE_WIDTH_128                  BIT(16)
#define WIDTH_128                       BIT(11)

#define DCHR0                           0x94
#define DCHR1                           0x194
#define DDR3_MODE                       BIT(8)

#define DCT_SEL_LO                      0x110
#define dct_high_range_enabled(pvt)     ((pvt)->dct_sel_lo & BIT(0))
#define dct_interleave_enabled(pvt)     ((pvt)->dct_sel_lo & BIT(2))

#define dct_ganging_enabled(pvt)        ((boot_cpu_data.x86 == 0x10) && ((pvt)->dct_sel_lo & BIT(4)))

#define dct_data_intlv_enabled(pvt)     ((pvt)->dct_sel_lo & BIT(5))
#define dct_memory_cleared(pvt)         ((pvt)->dct_sel_lo & BIT(10))

#define SWAP_INTLV_REG                  0x10c

#define DCT_SEL_HI                      0x114

/*
 * Function 3 - Misc Control
 */
#define NBCTL                           0x40

#define NBCFG                           0x44
#define NBCFG_CHIPKILL                  BIT(23)
#define NBCFG_ECC_ENABLE                BIT(22)

/* F3x48: NBSL */
#define F10_NBSL_EXT_ERR_ECC            0x8
#define NBSL_PP_OBS                     0x2

#define SCRCTRL                         0x58

#define F10_ONLINE_SPARE                0xB0
#define online_spare_swap_done(pvt, c)  (((pvt)->online_spare >> (1 + 2 * (c))) & 0x1)
#define online_spare_bad_dramcs(pvt, c) (((pvt)->online_spare >> (4 + 4 * (c))) & 0x7)

#define F10_NB_ARRAY_ADDR               0xB8
#define F10_NB_ARRAY_DRAM               BIT(31)

/* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline  */
#define SET_NB_ARRAY_ADDR(section)      (((section) & 0x3) << 1)

#define F10_NB_ARRAY_DATA               0xBC
#define F10_NB_ARR_ECC_WR_REQ           BIT(17)
#define SET_NB_DRAM_INJECTION_WRITE(inj)  \
                                        (BIT(((inj.word) & 0xF) + 20) | \
                                        F10_NB_ARR_ECC_WR_REQ | inj.bit_map)
#define SET_NB_DRAM_INJECTION_READ(inj)  \
                                        (BIT(((inj.word) & 0xF) + 20) | \
                                        BIT(16) |  inj.bit_map)


#define NBCAP                           0xE8
#define NBCAP_CHIPKILL                  BIT(4)
#define NBCAP_SECDED                    BIT(3)
#define NBCAP_DCT_DUAL                  BIT(0)

#define EXT_NB_MCA_CFG                  0x180

/* MSRs */
#define MSR_MCGCTL_NBE                  BIT(4)

enum amd_families {
        K8_CPUS = 0,
        F10_CPUS,
        F15_CPUS,
        F15_M30H_CPUS,
        F16_CPUS,
        F16_M30H_CPUS,
        NUM_FAMILIES,
};

/* Error injection control structure */
struct error_injection {
        u32      section;
        u32      word;
        u32      bit_map;
};

/* low and high part of PCI config space regs */
struct reg_pair {
        u32 lo, hi;
};

/*
 * See F1x[1, 0][7C:40] DRAM Base/Limit Registers
 */
struct dram_range {
        struct reg_pair base;
        struct reg_pair lim;
};

/* A DCT chip selects collection */
struct chip_select {
        u32 csbases[NUM_CHIPSELECTS];
        u8 b_cnt;

        u32 csmasks[NUM_CHIPSELECTS];
        u8 m_cnt;
};

struct amd64_pvt {
        struct low_ops *ops;

        /* pci_device handles which we utilize */
        struct pci_dev *F1, *F2, *F3;

        u16 mc_node_id;         /* MC index of this MC node */
        u8 fam;                 /* CPU family */
        u8 model;               /* ... model */
        u8 stepping;            /* ... stepping */

        int ext_model;          /* extended model value of this node */
        int channel_count;

        /* Raw registers */
        u32 dclr0;              /* DRAM Configuration Low DCT0 reg */
        u32 dclr1;              /* DRAM Configuration Low DCT1 reg */
        u32 dchr0;              /* DRAM Configuration High DCT0 reg */
        u32 dchr1;              /* DRAM Configuration High DCT1 reg */
        u32 nbcap;              /* North Bridge Capabilities */
        u32 nbcfg;              /* F10 North Bridge Configuration */
        u32 ext_nbcfg;          /* Extended F10 North Bridge Configuration */
        u32 dhar;               /* DRAM Hoist reg */
        u32 dbam0;              /* DRAM Base Address Mapping reg for DCT0 */
        u32 dbam1;              /* DRAM Base Address Mapping reg for DCT1 */

        /* one for each DCT */
        struct chip_select csels[2];

        /* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */
        struct dram_range ranges[DRAM_RANGES];

        u64 top_mem;            /* top of memory below 4GB */
        u64 top_mem2;           /* top of memory above 4GB */

        u32 dct_sel_lo;         /* DRAM Controller Select Low */
        u32 dct_sel_hi;         /* DRAM Controller Select High */
        u32 online_spare;       /* On-Line spare Reg */

        /* x4 or x8 syndromes in use */
        u8 ecc_sym_sz;

        /* place to store error injection parameters prior to issue */
        struct error_injection injection;
};

enum err_codes {
        DECODE_OK       =  0,
        ERR_NODE        = -1,
        ERR_CSROW       = -2,
        ERR_CHANNEL     = -3,
};

struct err_info {
        int err_code;
        struct mem_ctl_info *src_mci;
        int csrow;
        int channel;
        u16 syndrome;
        u32 page;
        u32 offset;
};

static inline u64 get_dram_base(struct amd64_pvt *pvt, u8 i)
{
        u64 addr = ((u64)pvt->ranges[i].base.lo & 0xffff0000) << 8;

        if (boot_cpu_data.x86 == 0xf)
                return addr;

        return (((u64)pvt->ranges[i].base.hi & 0x000000ff) << 40) | addr;
}

static inline u64 get_dram_limit(struct amd64_pvt *pvt, u8 i)
{
        u64 lim = (((u64)pvt->ranges[i].lim.lo & 0xffff0000) << 8) | 0x00ffffff;

        if (boot_cpu_data.x86 == 0xf)
                return lim;

        return (((u64)pvt->ranges[i].lim.hi & 0x000000ff) << 40) | lim;
}

static inline u16 extract_syndrome(u64 status)
{
        return ((status >> 47) & 0xff) | ((status >> 16) & 0xff00);
}

static inline u8 dct_sel_interleave_addr(struct amd64_pvt *pvt)
{
        if (pvt->fam == 0x15 && pvt->model >= 0x30)
                return (((pvt->dct_sel_hi >> 9) & 0x1) << 2) |
                        ((pvt->dct_sel_lo >> 6) & 0x3);

        return  ((pvt)->dct_sel_lo >> 6) & 0x3;
}
/*
 * per-node ECC settings descriptor
 */
struct ecc_settings {
        u32 old_nbctl;
        bool nbctl_valid;

        struct flags {
                unsigned long nb_mce_enable:1;
                unsigned long nb_ecc_prev:1;
        } flags;
};

#ifdef CONFIG_EDAC_DEBUG
int amd64_create_sysfs_dbg_files(struct mem_ctl_info *mci);
void amd64_remove_sysfs_dbg_files(struct mem_ctl_info *mci);

#else
static inline int amd64_create_sysfs_dbg_files(struct mem_ctl_info *mci)
{
        return 0;
}
static void inline amd64_remove_sysfs_dbg_files(struct mem_ctl_info *mci)
{
}
#endif

#ifdef CONFIG_EDAC_AMD64_ERROR_INJECTION
int amd64_create_sysfs_inject_files(struct mem_ctl_info *mci);
void amd64_remove_sysfs_inject_files(struct mem_ctl_info *mci);

#else
static inline int amd64_create_sysfs_inject_files(struct mem_ctl_info *mci)
{
        return 0;
}
static inline void amd64_remove_sysfs_inject_files(struct mem_ctl_info *mci)
{
}
#endif

/*
 * Each of the PCI Device IDs types have their own set of hardware accessor
 * functions and per device encoding/decoding logic.
 */
struct low_ops {
        int (*early_channel_count)      (struct amd64_pvt *pvt);
        void (*map_sysaddr_to_csrow)    (struct mem_ctl_info *mci, u64 sys_addr,
                                         struct err_info *);
        int (*dbam_to_cs)               (struct amd64_pvt *pvt, u8 dct, unsigned cs_mode);
        int (*read_dct_pci_cfg)         (struct amd64_pvt *pvt, int offset,
                                         u32 *val, const char *func);
};

struct amd64_family_type {
        const char *ctl_name;
        u16 f1_id, f3_id;
        struct low_ops ops;
};

int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
                               u32 *val, const char *func);
int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset,
                                u32 val, const char *func);

#define amd64_read_pci_cfg(pdev, offset, val)   \
        __amd64_read_pci_cfg_dword(pdev, offset, val, __func__)

#define amd64_write_pci_cfg(pdev, offset, val)  \
        __amd64_write_pci_cfg_dword(pdev, offset, val, __func__)

#define amd64_read_dct_pci_cfg(pvt, offset, val) \
        pvt->ops->read_dct_pci_cfg(pvt, offset, val, __func__)

int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
                             u64 *hole_offset, u64 *hole_size);

#define to_mci(k) container_of(k, struct mem_ctl_info, dev)

/* Injection helpers */
static inline void disable_caches(void *dummy)
{
        write_cr0(read_cr0() | X86_CR0_CD);
        wbinvd();
}

static inline void enable_caches(void *dummy)
{
        write_cr0(read_cr0() & ~X86_CR0_CD);
}

static inline u8 dram_intlv_en(struct amd64_pvt *pvt, unsigned int i)
{
        if (pvt->fam == 0x15 && pvt->model >= 0x30) {
                u32 tmp;
                amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &tmp);
                return (u8) tmp & 0xF;
        }
        return (u8) (pvt->ranges[i].base.lo >> 8) & 0x7;
}

static inline u8 dhar_valid(struct amd64_pvt *pvt)
{
        if (pvt->fam == 0x15 && pvt->model >= 0x30) {
                u32 tmp;
                amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp);
                return (tmp >> 1) & BIT(0);
        }
        return (pvt)->dhar & BIT(0);
}

static inline u32 dct_sel_baseaddr(struct amd64_pvt *pvt)
{
        if (pvt->fam == 0x15 && pvt->model >= 0x30) {
                u32 tmp;
                amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp);
                return (tmp >> 11) & 0x1FFF;
        }
        return (pvt)->dct_sel_lo & 0xFFFFF800;
}